|
| 1 | M&L for complete removal of existing treatment from old surfaces of walls including cornices and applying 1mm thick wall care putty including suitable primer to obtain the desired/ true surface of wall and applying two coat of Oil bound distemper complete all as specified and directed by Engineer- in-charge. |
| 2 | M&L for complete removal of existing treatment by scrapping with machnical wall sander/manually as per site requirement and applying two coats of Two Component acrylic polymer-modified cementitious high performance coating (Make-\\"Smartcare DampBlock 2k\\" of M/S asian paints/\\"Dr. Fixit Pidifin 2K\\" of Dr. fixit/\\"Homeshield wallshield 2K \\" of M/S berger paints) in the ratio of 2:1 (2 parts powder to 1 part liquid) using roller/brush having coverage of 1.39sqm/kg/coat appx and allow each coat to dry for 4-6 Hrs and applying two coat of Oil bound distemper over and including 1mm thick wall care putty including necessary scaffolding and safety measures and complete all as specified and directed. |
| 3 | M&L for Preparation of old decorated surfaces of wall using mechanical/manual means including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material including screws, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying one coat of oil emulsion distemper on old decorated surface of wall etc, complete all as specified and directed. |
| 4 | M&L for Preparation of old decorated surfaces of wall using mechanical/manual means including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material including screws, scrapping down, smoke soot, moulds, mass and effloresent salts and treating out greasy spots and applying two coat of oil emulsion distemper on old decorated surface of wall etc, complete all as specified and directed. |
| 5 | M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash, complete, all as specified & as directed. |
| 6 | M&L for preparation of old surfaces (plastered or unplastered) of ceilings including cornices, pilasters etc including brooming or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil, greasy spots and applying one coat of white wash on ceiling, complete, all as specified & directed. |
| 7 | M&L for obliterating old writing of any description, not exc 0.1 sqm with paint to match existing works complete all as specified and directed. |
| 8 | M&L for rewriting/repainting to existing writing letters or figures not exc 30 cm height in block Roman, Italian or Indian letters including stops, comma, arrows, brackets, dashes etc on sign board (Black or yellow base) with and including two coats of oil paint over a coat white base synthetic enamel paint complete all as specified and directed. |
| 9 | M&L for preparation of old painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed. |
| 10 | M&L for preparation of new painted surfaces of wood & wood based material of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over coat of pink primer, complete all as specified and as directed. |
| 11 | M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint, complete, all as specified and as directed |
| 12 | M&L for Preparing old plastered surfaces of walls including filling the cracks, depressions with puyty to match with the adjacent surface and applying one coat of plastic emulsion paint, white or tinted by the use of rollers as approved complete all as specified and directed. |
| 13 | M&L for prepration of old decorated Brick tile /Concrete tiles (Chequered / interlocking tiles) cleaning by any means, and applying one coat of floor tile paint any colour with spray gun/compressor complete all as specified and directed as approved by Engr-in-Charge. Make: INDOGO Floor Paints or Apex Floor Guard of Asian Paints |
| 14 | M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, and applying two coat of Texture paint over a coat of primer of any colour complete all as specified and directed. |
| 15 | Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed. |
| 16 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off thepremises complete all as specified and as directed. |
| 17 | M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (using 12.5mm graded aggregate)as in sub base of flooring complete all as specified and directed |
| 18 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 19 | M&L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed. |
| 20 | All as per above item no. 19 but on vertical surfaces incuding 10mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 21 | M&L for glazed ceramic tiles 450x300 x 6-7mm thick coloured on vertical surfaces such as skirting/dados etc, set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over rendering 10 mm thick in CM 1:3 on wall including dismantling of floor, hearth/wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 22 | M&L for vitrified ceramic coloured tiles 10 mm thick, area of each tiles n. exc 0.36 sqm in floors, set and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed |
| 23 | All as per above item no. 22 but on vertical surfaces incuding 10mm thick rendering in CM 1:4 including dismantling of floor, hearth/wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 24 | M & L for rendering 10 mm thick on other than fair faces of brick wall finished even and smooth without using extra cement in CM 1:6 incl taking down cement plaster incl preparation of newly plastered surface and Providing and applying plaster of paris putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper oil emusion complete all as specified and directed. |
| 25 | M & L for 5 mm thick rendering in cement mortar 1:3 to the surfaces of ceiling/fascia/roof projection and finishing even and smooth without using extra cement incl taking down cement plaster including preparation of newly plastered surfaces of ceiling and applying two coats of white wash complete all as specified. |
| 26 | M & L for rendering 15 mm thick on fair faces of brick wall finished even and smooth without using extra cement in CM 1:4 taking down cement plaster including preparation of newly plastered surface of wall and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. over a coat of primer complete all as specified. |
| 27 | Demolition of Stone slabs of any description or thickness in floors / kitchen/roof platforms etc., complete all as specified and as directed. |
| 28 | M&L Granite of 18mm to 20mm thick (of any type) work (table rubbed/moulding and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including over and 20mm screed bed in CM 1:4 all as specified and directed. |
| 29 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each including iron mongeries complete all as specified and directed. |
| 30 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exe 1.5 Sqm but not exc 4.0 Sqm each including iron mongeries complete all as specified and directed. |
| 31 | Taking down old shutter exc 1.0 sqm but n exc 2.0 Sqm each complete all as specified and directed. |
| 32 | S&F for Factory Made Solid extruded wood polymer composite solid door/window/ceosetory window & other frame chowkhat of sie 65x125 mm comprising of virgin polymer of k value 58-60,calcium carbonate and natural fibres and non toxic additives fabricated with miter joints after applying pvc solvent and screwed with full body threaded star headed ss screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200 N and 1100N,minimum compressive strength 58 N/mm2,modules of resistance 900N/mm2 & resistance to & fixing in position with holdfast /lugs/ fasterners of reuired depth as per directions of engineer-in-charge complete all as specified and directed. |
| 33 | S&F for Factory Made Solid extruded wood polymer composite solid door/window/ceosetory window & other frame chowkhat of sie 50x100 mm comprising of virgin polymer of k value 58-60,calcium carbonate and natural fibres and non toxic additives fabricated with miter joints after applying pvc solvent and screwed with full body threaded star headed ss screws having minimum frame density of 750kg/cum,screw withdrawl strength of 2200 N and 1100N,minimum compressive strength 58 N/mm2,modules of resistance 900N/mm2 & resistance to & fixing in position with holdfast /lugs/ fasterners of reuired depth as per directions of engineer-in-charge complete all as speciifed and directed. |
| 34 | S&F actory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 35 | S&F 30 mm thick flush shutter solid core construction with block board core and plywood faced panels commercial type on both sides including 0.9 mm thick decorative laminate type-I of surface finish color and pattern as approved with adhesive both sides complete all as specified and directed. |
| 36 | S&F 30mm thick FACTORY MADE WIRE MESH SOLID WPC DOOR SHUTTER consisting of Density 500 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose.(confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in -charge, manufacturer's specification & drawings.The wire gauge shall be stretched to tighten firmly complete all as specified. |
| 37 | S & F factory made 35 mm thick IInd class HW glazed & skeleton shutters open rebated and prepared to receive glass gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter , divided into squares with plain chamfered rounded, mitered and rebated sash bars complete all as spd and directed. |
| 38 | S&F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Prelam Sheet on the front face & 2mm Prelam colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 39 | S & F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories for the following size :- (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.) |
| 40 | Area not exceeding 2.00 sqm each |
| 41 | Area exceeding 2.00 sqm each |
| 42 | Supply only 10mm thick toughened glass as approved by GE |
| 43 | S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors or wall using Spun pipes CI pipes 100 mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed. |
| 44 | S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors/walls using Spun pipes CI pipes 75mm bore pipes etc complete all as specified including dismantling old pipe with fittings complete all as specified and directed. |
| 45 | S&F 100mm bore Cast Iton bend, any radius complete all as specified and directed. |
| 46 | S&F 75mm bore Cast Iron bend, any radius complete all as specified and directed. |
| 47 | S&F, 100 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as spd and directed. |
| 48 | S&F, 75 mm bore Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) Complete all as spd and directed. |
| 49 | S&F GI tubing 15mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 15 mm bore steel tubing etc complete all as specified and as directed. |
| 50 | S&F GI tubing 25mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 25 mm bore steel tubing etc complete all as specified and as directed. |
| 51 | S&F GI tubing 20mm dia bore medium grade with and including all fittings and fixed to wall, floor and ceiling including taking down old 20 mm bore steel tubing etc complete all as specified and as directed. |
| 52 | Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all Scales and dirts from the Tank and mouths of Circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 250 LITRE but not exc. 500 LITRE, cleaning the Tank by scrubbing the deposits with Wire Brush, writing Letters \\"CLEANED ON DD.MM.YYYY\\" (i.e. date of Cleaning of Tank) not exc. 50mm in height afterand hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 53 | Disconnecting existing tanks, setting aside (or lowering if required) for Cleaning and removing all Scales and dirts from the Tank and mouths of Circulating Pipes, etc. after draining out Water from the Tank of capacity exc. 500 LITRE but not exc. 1000 LITRE, cleaning the Tank by scrubbing the deposits with Wire Brush, writing Letters \\"CLEANED ON DD.MM.YYYY\\" (i.e. date of Cleaning of Tank) not exc. 50mm in height afterand hoisting if required reconnecting and re-fixing in position complete all as specified and as directed. |
| 54 | S&F rotational moulded polythene water storage tank of capacity 500 ltrs (Cylindrical/vertical with closed top)triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 250- 500 Litres) & removing to where directed complete all as specified and as directed Make( Sintex/Vectus) |
| 55 | S&F rotational moulded polythene water storage tank of capacity 1000 ltrs (Cylindrical/vertical with closed top),triple layer construction, ISI marked, hoisted & fixed in position including over flow 450mm, waste pipe 600mm long with all fittings such as dead plugs and checknuts etc. of 20 mm dia including dismantling of old PVC tank (Capacity 500- 1000 Litres) & removing to where directed complete all as specified and as directed. Make (Sintex/vectus) |
| 56 | S&F ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore pipe minimum weight 210 gms complete all as specified. |
| 57 | S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed 20mm bore pipe minimum weight 210 gms complete all as specified. |
| 58 | S&F in repair CP health faucet with 1.00 Mtr long flexible tube incl wall hook complete all as specified and directed. |
| 59 | S&F in repair plastic water closet seat cover black/white, closed pattern with flat bottmom & cover and aluminum anodised hinging device all as specifed and as approved. |
| 60 | S&F in repair coloured vitreous china EWC including cistern (Cascade Pattern) wall hung/floor mounting as single piece closet of parryware or equivalent including all fitting & fixtures required for proper function complete including necessary pipe, bend, making holes into existing wall, floor etc and making good with PCC 1:2:4 type B1 using 20mm graded stone aggregate complete all as specified and directed. (Make : Cera/perryware/jaquar or equivalent) |
| 61 | S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixing bolts, flushing cistern) including flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern etc all as specified and directed.(-Make- hindware/ Jaquar/Cera as approved by GE. |
| 62 | S&F in repairs vitreous china squatting pan (Orissa pattern) water closet (white) of size 580x440mm with integral foot rests, 'P' or 'S' trap, including connection to trap and flushing pipe, antisyphonage pipe incl PCC 1:5:10 type E2 in filling making good to floor etc all as specified.Make- hindware/ Jaquar/Cera as approved by GE. |
| 63 | S&F in repair of internal fittings Kit/wall mounted concealed for vitreous china flush cistern with twin flush complete all as specified and directed |
| 64 | S&F in repair PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including 32 mm dia PVC flush pipe connected to water closet with inlet, ball valve, float and handle complete all as specified. Make: Cera/Prayag or equivalent as approved by GE. |
| 65 | S&F in repair CP Shower rose with arms 125 mm dia with size complete all as specified and as directed.Make- Plumber/ Jaquar/Cera as approved by GE. |
| 66 | S&F in repairs two way bib cock, brass CP mixture for mixing hot & cold water Quarter turn with water saving nozzle complete all as specified and as directed by Engineer-in-Charge. |
| 67 | S&F in repairs PTMT waste pipe 32 mm bore of length up to 80 cm for WHB / sink/unrinal pots, complete all as specified and directed. |
| 68 | Supply & fix in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long. |
| 69 | S&F in repair glass corner self assembly, fancy type, made of 7-8mm thick sheet toughened glass of size 300*150mm, fixed with CP brackets, complete, all as specified and directed. |
| 70 | S&F in repairs brass cromium plated Towel Ring 200mm outer dia made up of 10mm dia rod fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) all as specified. |
| 71 | S&F in repairs brass cromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges, fixed with rawl plugs. all as specified. |
| 72 | S&F in repair fancy type brass chromium plated wall mixer with and including Telephonic shower arrangements & with pipe bend 3-in-1 screwed down with connection to overhead and hand shower suitable for 15 mm bore GI pipe Quarter turn with water saving nozzle complete all as specified and directed. |
| 73 | S&F in repair fancy type brass chromium plated wall mixer 2-in-1 with wall flanges Connecting legs and bend screwed down suitable for 15 mm bore GI pipe Quarter turn with water saving nozzle complete all as specified and directed. |
| 74 | S&F in repairs of fancy type sink mixer brass chromium plated screwed down 15mm bore Quarter turn with water saving nozzle |
| 75 | S&F in repairs of fancy type Centre hole basin mixer brass chromium plated screwed down 15mm bore Quarter turn with water saving nozzle complete all as specified and as directed.Make- Jaquar/Cera or requivalent as approved by GE. |
| 76 | S & F in repair fancy type angle/stop cock, 15 mm dia, cast copper alloy, with chromium plated, screwed down , high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and as directed. |
| 77 | S & F in repair Bib cock long body with flange, 15 mm dia, cast copper alloy, fancy type ,chromium plated, screwed down , screwed for iron pipe or for brass ferrule and fixed, Quarter turn with water saving nozzle complete all as specified and as directed. |
| 78 | S&F in repairs PVC connections 15mm size of PTMT of 600mm long. complete all as specified and directed. |
| 79 | Repair leakage of 15 mm bore CP Wall Mixer/WHB Mixer/Sink Mixer by replacing of necessary brass spindles as required complete all as specified and directed. |
| 80 | S & F in repair Gun-metal, globe or gate valve, 20 mm dia, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and as directed. |
| 81 | S&F fxed in repairs tank covers (with locking arrangements as per existing one) of water storage tank for capacity 500 ltrs to 1000 ltrs complete all as specified & directed. |
| 82 | S&F in repair 1.00 mm thick stainless steel plate rack of over all size 600x900x100 mm of standard pattern complete all as specified and directed. Make : Nirali or equivalent |
| 83 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe( overall size 1016mm x 510mm bowl size 485x460x230mm), complete all as specified and directed. |
| 84 | S&F in repair high quality plastic bathroom cabinet of size 550 x 342 x 125mm consisting front looking mirror and four to five inner compartments fixed with and including chromium plated brass screws and wooden/plastic cleats, desinge and pattern approved by GE complete all as specified and directed |
| 85 | S&F in repairs 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with C.P. brass screws and cup washers complete all as specified and directed. |
| 86 | S&F in repair chromium plated hand shower with flexible pipe not less than 1 Meter suitable for 15 mm bore fittings complete all as specified and directed. |
| 87 | S&F in repair 125mm chromium plated central hole grating dome with waste hole complete all as specified and directed. |
| 88 | S&F in repair CP soap dish with glass Finish (Glossy) complete all as specified and directed. |
| 89 | S&F in repair brass chromium plated paper holder complete as specified and directed |
| 90 | S&Fixed in repair of SS powder coated peg sets of 6 Nos peg set of good quality, complete all as specified and directed. |
| 91 | S&F in repair 18mm thick solid PVC board of 1st quality of one side prelaminated of approved colour and one side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters including dismantling boarding any description complete all as specified and directed. |
| 92 | S&F in repair 18mm thick solid PVC board of 1st quality both side white colour fixed with screwes, solvent cement/ adhesive to make kitchen cabinate and cup board shutters including dismantling boarding any description complete all as specified and directed. |
| 93 | S & F in repair 12mm thick PVC board of grade 1 quality of both side plain white colour fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom, shelves inside the cabinet and shutter or drawer any type or specification complete all as specified and directed. |
| 94 | S & F including fabricating of aluminium powder coated having minimum thickness of powder coating 50 micron for door / window / ventilator frame, shutters and partition including necessary joining cleats, glazing clips, aluminium snap beading having minimum wt 100gm/RM, rubber neoprene gasket, screws, dash fasteners, rawel plug for fixing of screw in wall or floor etc. aluminium sections as approved by GE complete all as specified and directed. |
| 95 | S&F aluminium grills of size exc 5mm x 7.5mm and aperture n. exc 80 mm incl fixing with aluminium channel 1mm thick with steel screw and tint match with existing complete all as specified and as directed |
| 96 | S&F mild steel work as in small ariticles as bend, strap, hold fast,jiost,angles and smiliar articles Fe-410W Gde E complete all as speciifed and directed. |
| 97 | Refixing of shutters including taking down of any description exceeding 1 sqm but not exceeding 2 sqm each in same or other opening(s) after resecuring or easing & adjusting, complete all as specified and directed. |
| 98 | Taking down existing aluminium doors in any size and in any description with complete fittings and fixture and refixing in the same opening after repairing/servicing/greqasing & adjustment of floor spring etc complete all as specified and directed.Note: Material like aluminium snap beading, rubber gasket and glass shall be paid separately |
| 99 | Supply only powder coated aluminium snap beading as approved by GE |
| 100 | Supply only rubber gaskete for packing of glass panes as approved by GE |
| 101 | Supply only 5mm thick tinted glass as approved by GE |
| 102 | S&F in repairs Mild steel Mortice lock double handle, vertical type, 06 levers for door complete all as spd and directed by Engr in charge. |
| 103 | S&F in repair, aluminium (extruded section body) door closer hydraulically regulated, designation No. 3 universal type, suitable for door shutters up to 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 104 | S&F in repair double action floor spring hydaulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty including necessary cutting to floor and concrete work complete all as specified and directed. |
| 105 | S&F in repair galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanized wire staples completed all as specified and directed. |
| 106 | S & F in repair 140mm door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring, fixed complete all as specified and directed. |
| 107 | Supply and fixing of steel door spring of size 300mm in wooden/steel frame by welding or screwing as which ever is appropriate for fixing in frame complete all as specified and directed. |
| 108 | S&F 3 mm thick sheet glass ordinary quality type & glazing with oil putty in squares not exc 0.5 Sqm in each pane with wooden beads/putty including hacking out old glass from frames glazed with p[utty or fixed with beads complete all as spd and directed |
| 109 | S & F stainless steel butt hinges of 125 mm size complete all as specified and directed. |
| 110 | S&F 150mm long aluminum anodized barrel tower bolts of extruded section & fixed complete all as specified and directed. |
| 111 | S&F aluminum handles anodized 150 mm size complete all as specifed and directed |
| 112 | S&F stainless stell anodised , sliding door bolt with hasp , staples (bolt type) and fixing clipsof sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed 250 mm long complete all as specified and directed. |
| 113 | S&F in repair fancy type decorated anodised aluminium curtain hanging rods 25 mm dia heavy duty (304 grade)including brackets, including fixing arrangement,heads at both ends and making up repair work and all fitting complete all as specified and directed. |
| 114 | S & F continuous (Piano) hinges ,stainless steel, bright finished or electrogalvanised, width of flap 30 mm (when open), complete all as specified and directed. |
| 115 | S&F soft closing hinges O 'Dgree' heavy duty 304 Grade high grade mild steel, bright finish or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed. |
| 116 | S&F in repairs soft closing hinges O 'Dgree' heavy duty 304 Grade high grade mild steel, bright finish or electrogalvanised as per approved sample for kitchen cupboard shutters complete all as specified and directed. |
| 117 | S&F in repairs stainless steel drawer telescopic channel of size 500mm long of load bearing capacity 35 Kg complete all as specified and directed |
| 118 | S&F in repairs Magnet catch for kitchen cabinet shutters as per approved sample complete all as specified and directed. |
| 119 | Supply and fixing of coloured powder coated aluminium strip of size not less than 30mm wide with brush lining fixed at bottom of wooden/aluminium door to cover gap between door and floor r complete all as specified and directed. |
| 120 | S&F 100mm long fancy SS handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge |
| 121 | Supply and fixing in repair Stainless Steel (SS-204) plate/cutlery/Large utensil/Cup&saucer/Tali basket of size as per site requirement of approved sample complete all as spd and directed. Please Enable Macros to View BoQ information |
