|
| 1 | Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, complete all as specified and directed. |
| 2 | Corrugated galvanized iron mild steel sheets 0.63mm thick, grade ‘O’, with 275 grams per square metre zinc coating fixed with 'J' or 'L' hook as in roof covering with two corrugation side lap. (Horizontal distance of side lap shall not be less than 145mm and depth of corrugation shall be 12.50mm), complete all as specified and directed. |
| 3 | All as per Serial Item No. 2 above but except sheeting.Note:- Serviceable sheets retrieved from Serial Item No. 1 above shall be used. |
| 4 | 0.63mm thick plain galvainsed mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and directed. |
| 5 | Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 6 | Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 7 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 8 | Rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to grade Fe.410 Gde E-250, steel work, complete all as specified and directed. |
| 9 | Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc. conforming to grade Fe.410-W.Gde-E-250 quality A, steel work, complete all as specified and directed. |
| 10 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, complete all as specified and directed. |
| 11 | Providing and fixing in position PVC paneling/planks in ceiling at all heights with PVC wall panel/sheets (5-9mm thickness) of approved texture, design and patterns, using suitable formwork comprising of a frame made in the ceiling offsets from especially fabricated galvanized mild steel sheet and PVC wall panel/sheets of noncombustible are to be screw fixed with self-tapping pan head nickel coated mild steel screws to grid as per direction of Engineer-in-Charge. Note: All fittings including PVC Strips/adhesives or any other are included in this item. |
| 12 | Providing and fixing in position wall paneling at all heights with PVC wall panel/sheets (5-9mm thickness) of approved texture, design and patterns, comprising of a frame made in the wall offsets from especially fabricated galvanized mild steel sheet and PVC wall panel/sheets of noncombustible are to be screw fixed with self-tapping pan head nickel coated mild steel screws as per direction of Engineer-in-Charge. Note: All fittings including PVC Strips like L,U etc fixed at corner edges, adhesives or any other are included in this item. |
| 13 | S&F false ceiling of Non asbestos fibre cement building boards (designed pre painted), manufactured from homogeneous mixture of cement, quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 600 mm x 600 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 600mm X 600mm . The aluminium fram work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE |
| 14 | Dismantling boarding, any description (wall panelling/ceiling/lining/ cladding/partition etc), fixed in any position with screws/nails, complete all as specified and directed. |
| 15 | 18/19mm thick block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work, complete all as specified and directed. |
| 16 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, complete all as specified and directed. |
| 17 | Extruded aluminium alloy handles (ISI marked, fabricated type, anodised, of size 75mm, complete all as specified and directed. |
| 18 | Dismantling timber scantlings 40 sqcm and over in section, in any position, framed work, complete all as specified and directed. |
| 19 | 2nd class soft wood as in scantling clean sawn timber fixed in framed, vertical post, scantling for ceiling and roof members complete all as specified and directed. |
| 20 | Applying two coats of creosote oil on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as as specified and directed. |
| 21 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.50 Sqm each and removing from site, complete all as specified and directed. |
| 22 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, complete all as specified and directed. |
| 23 | Taking down shutters of any description not exc. 1 Sqm each and removing from site, complete all as specified and directed. |
| 24 | Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, complete all as specified and directed. |
| 25 | 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as as specified and directed. |
| 26 | Pressed steel frames of size 105x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed. |
| 27 | Pressed steel frames of size 125x60mm for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate, 25x3mm flat iron 230mm long hold fast etc, complete all as specified and directed. |
| 28 | S&F Powder coated aluminium minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge. |
| 29 | S&F Power coated anodized aluminium door shutter of approved design complete with all fixing arrangements including providing and fixing door handles, tower bolts, mortice lock, hinges, door stopper including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- a) Shutter vertical member 85.00 x 44.45 x 1.80mm weighing 1.302 Kg/RM.b) Shutter top member 83.5 x 44.45 x 1.70 mm weighing 1.243 Kg/RM.c) Shutter bottom member 114.30 x 44.45 x 1.29mm weighing 1.139 Kg/RM.d) Shutter lock rail 83.5x44.45x1.70mm weighing 1.243 Kg/RM.e) Anodised aluminium handle, fancy type,350mm long, Aluminium Door Closer and aluminium tower bolt of size 150mm.(f) 5.50mm thick tinted sheet glass fixed with alumnium beading, silicon lining and gaskets. Note:- Shutter shall be fixed with heavy floor spring or hydrauIic door closer ISI marked and pivot, brass lock with duplicate keys. |
| 30 | S&F Power coated anodized aluminium window or ventilator (double shutter (glazed & Gauged) with chowkhat of approved design complete all as directed with all fixing arrangements (including providing and fixing window handles, tower bolts and provision for fixing lock) including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a)Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881 Kg/RM.(b)Shutter top member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(c)Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(d) 5.50mm thick tinted glass fixed with alumnium beading, silicon lining and gaskets complete. (e) The size of anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and anodised aluminium tower bolt of size 100mm (02 Nos). (g) Wiremesh of standard size for approved shutters of sections mentioned above. (Note: All fixtures & fastenings required are included in this rate. |
| 31 | S&F Power coated anodized aluminium fixed window/ventilator (glazed or Gauged) with chowkhat of approved design complete all as directed with all fixing arrangements (including providing and fixing window handles, tower bolts and provision for fixing lock) including neoprene lining. The member shall made out of extruded aluminium sections comprising of:- (a)Shutter vertical member 47.62 x 45.45 x 1.74mm weighing 0.881 Kg/RM.(b)Shutter top member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(c)Shutter bottom member 47.62 x 44.45 x 1.14mm weighing 0.607 Kg/RM.(d) 5.50mm thick tinted glass fixed with alumnium beading, silicon lining and gaskets complete. (e) The size of anodised aluminium round handle, fancy type shall be 100mm dia (02 Nos) and anodised aluminium tower bolt of size 100mm (02 Nos). (g) Wiremesh of standard size for approved shutters of sections mentioned above. (Note: All fixtures & fastenings required are included in this rate) |
| 32 | Taking down aluminium door shutter n. exc 2 Sqm each, taking out servicable glass panes, hydraulic door clocer, but hinges, double action hydraulically regulated floor spring and other fittings, if required carefull and refixing in the same opening after repairs of unserviceable or loosened joints/cleats of top rail/bottom rails/lock rails and styles etc and fixing old serviceable glass, any thickness with rubber packing and aluminium beadings, fixing of old servicable hydraulic door closer, double action door spring duly oiling/greasing and fixing all servicable fitting complete all as directed by Engr-in-Charge.NOTE;- Unservicable door closer, double action floor spring, glass panes and other fittings etc shall be replaced and paid under separate items of schedule. |
| 33 | Sheet glass 5.5mm thick ordinary quality and glazing with glazing clips, ruber neoprene packing, aluminium beads in squares, not exc. 0.5sqm in each pane, complete all as specified and directed. |
| 34 | Mortice lock, brass, vertical type, size 100 mm, 4 lever, fixed into aluminium door shutter, fixed in repair, complete all as specified and directed. |
| 35 | Aluminium (diecast) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified and directed. |
| 36 | Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repair, complete all as specified and directed. |
| 37 | Factory made 2nd class hard wood (Sal/ Hollock) plain, framed, panelled 35mm thick shutters without interlocking rail and with one panel and panels of 9mm BWP commercial plywood or 12mm veneered particle board with commercial face veneers on both face, timber flat on bolts side (feather edged or veneered particles board medium density wood particles with commercial face veneers etc.).The size of rail and style as per IS–1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as as specified and directed. |
| 38 | Factory made second class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive with sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc. size of member as specified in SSR Part I, Section 8 clause 8.24(b), complete all as as specified and directed. |
| 39 | 35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed by Engr-In-Charge. |
| 40 | Applying two coats of synthetic enamel paint over a coat of pink primer on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, complete all as as specified and directed. |
| 41 | Factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing on page No 180 of MES SSR 2020 Part-II, complete all as as specified and directed. |
| 42 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as as specified and directed. Please Enable Macros to View BoQ information |
| 43 | Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of 5 mm thick plain coloured PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site, Sheet No 1/1), complete all as as specified and directed. Please Enable Macros to View BoQ information |
