|
| 1 | Earth work excavation and depositing on bank within initial lead of 10 M and initial lift of 2M in hard stiff clay, stiff black cotton, soil, hard red earth, shales, murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil as per SS 20B for foundation. |
| 2 | Supplying and filling in foundation and basement with Crushed Stone Dust in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 4 | Centering for side and soffits of plain surface including strutting 3m high using MS Steel of size 90cm and 10 gauge fitted with MS angle of size 25 x25 x 3mm laid over silver oak (C wood) fasts of size 10 X6.50cm spaced at about 90 c/c and supported by casuarinas props 10 to 13cm dia spaced at 75cm c/c complying with standard specification. |
| 5 | Plain Cement Concrete 1:2:4 (one cement, two sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers. |
| 6 | Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. |
| 7 | Supplying and laying of Interlocking Paver Block Stone 83mm thick Over a base layer of crushed stone sandfilling incl. Cost of materials laying and Labour charges etc complete complying with the standard specification and as directed by the departmental officers. |
| 8 | Paving pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 in Cement Mortar 1:3 (One Cement and Three crushed stone sand), with required Cement Slurry and Mortar Plasticizer, 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 9 | Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 10 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 11 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 3.50 x 2.88m. The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/ m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 5.5mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use. |
| 12 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 13 | Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc., |
| 14 | Supplying & fixing door shutters for Mediun Density Fiber Board of exterior grade 35 mm thick,single leaf conforming to IS:12406/1989 with 35x12 mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with standard specifications. The rate is inclusive of threee coats of best quality varnish but excluding cost of furniture fittings.such as 300 mm tower bolt 2nos,200mm towerbolt I no. 300mm Aldrop 1 No. Alu handle ornamental type 2 Nos,and 1 No. Door stopper etc complete.(excluding Door Frame) |
| 15 | Supplying and fixing of SS Sink of size 600 x 600 x 250mm including all Cost and Conveyence of Materials and Labour for fixing including with all accessories etc., Complete with standared specification. (M-0556) |
| 16 | Supplying and fixing of Brass chromium plated screw down Tap 15 / 12mm Dia (Heavy Type) including all Cost and Conveyence of Materials and Labour for fixing including with all accessories etc., Complete with standared specification. (M-0508) |
| 17 | Supplying and fixing of Ornamental False Celing Spot Light With Glass shade including all Cost and Conveyence of Materials and Labour for fixing including with all accessories etc., Complete with standared specification. (W-0339) |
| 18 | Supply and fixing of single box type 4'36W fluorescent fitting complete with electronic ballast with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS Copper leads from terminals to the fitting etc., Complete with standared specification. (SD - 87) |
| 19 | supply and fixing of 1200mm (48\\") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") etc., Complete with standared specification. (SD - 469) |
| 20 | Supply and Erection of CCTV in the following items. Armoured cat-6 cable (PWD SOR 2024-2025) Page No.222IUniqcode No:M-2184 |
| 21 | POE switch for CCTV camera - 24 port (PWD SOR 2024-2025) Page No.222 Unicode No. M-2198 |
| 22 | Net work video record for CCTV 32 Channel - 2 SATA 2 No Hard disk (PWD SOR SOR 2024-2025) Page No.222 Unicode No. M-2194 |
| 23 | 1.3 MP HD Bullet camera sensor, 3.6 mm 1080 lens, 36 IR high sensitive LED, 25 M distance IR with heat absorbing filter & day / night sensor (as per Quatation) |
| 24 | Rack with Accessories 4U Rack (PWD SOR 2024-2025) Page No.224 Iunicode No:M-0225 |
| 25 | I/O SOKET RJ 45 (PWD SOR 2022-2023) Page No.154 Item No. 37,a |
| 26 | Supply and Fixing CCTV Camera Outdoor Box(as per Quatation) |
| 27 | Supply and Fixing POE Switch for Outdoor Box(as per Quatation) |
| 28 | LG monitor 22 inches (as per Quatation) |
| 29 | Supply and Fixing of CCTV Camera installation ,cable laying and network commsioning charges etc..,Complete including all labour Chargers.(as per Quatation) |
| 30 | Painting two coats with ready mixed interior Plastic Emulsion Paint approved quality and colour , including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 31 | Celing Painting Distempering the Two Coats of approved quality including preparation of surface, the rate includes cost of brushes, high scaffolding arrangements, neat finishes, etc., complete complying with standard specification and as directed by the departmental officers. |
| 32 | Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading,unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 1000 litres capacity Please Enable Macros to View BoQ information |
