|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in- charge. |
| 2 | Dismantling tile work in floor and roofs laid in cement mortar including stacking material within 50 meters lead:- For thickness of tiles 10 mm to 25mm |
| 3 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : :- 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) |
| 4 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. With cement mortar 1:4 (1 cement : 4 fine sand) |
| 5 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make, size, and colour, conforming to IS: 4457, laid in acid and/or alkali resistant mortar bedding, including cutting, fitting, and grouting of 3 mm wide joints with epoxy grout comprising 0.70 kg organic coated filler of approved shade mixed with 0.10 kg hardener and 0.20 kg resin per kg, including filling, finishing, and all incidental works complete as per the directions of the Engineer-in-Charge:- In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) :- Acid and alkali resistant tile |
| 6 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 7 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 8 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.75 ltr/10 sqm of approved brand and manufacture |
| 9 | Providing and fixing floor mounted, white vitreous china water closet of approved brand/make, shape, size and pattern including white vitreous china cistern of capacity 10 litres with flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in- Charge. |
| 10 | Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stailess steel plug 40 mm including painitng of fittings and brackets, cutting and making good the walls wherever required : without drain boad : 470x420mm bowl depth 178 mm |
| 11 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore Class Heavy (C) with 3.2 mm thickness. |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 13 | Providing and fixing white vitreous china pedestal for wash basin completel recessed at the back for the reception of pipes and fittings. |
| 14 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 15 | Providing and fixing unplasticised PVC Connection pipe with brass union : 45 cm long 15 mm nominal bore |
| 16 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:15 mm nominal bore . |
| 17 | Providing and fixing pillar cock 15mm dia in all respect make Hindware |
| 18 | Providing and fixing stop cock 15mm dia in all respect make jaquar |
| 19 | Providing and fixing 8 mm dia C.P. /S.S Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in charge |
| 20 | Providing and fixing C.P. brass Angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore |
| 21 | Providing and fixing C.P. brass towell rail (Cera/Hindware/Jal or equivalent brand) complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws. 450 mm long towel rail with total length of 495 mm , 78 mm wide and effective height of 888 mm, weighing not less than 170 gms. |
| 22 | Providing and fixing PTMT grating of approved quality and colour Circular type 100 mm nominal dia |
| 23 | Providing and fixing 600x120x5mm glass shelves with edges round off supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws , rawl plugs etc. complete Please Enable Macros to View BoQ information |
