Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earth work in exacavation of foundation in ordinary soil including dressing levelling the bed etc. complete as per Techinal Specification clause 302.3.5.complete as per the direction of Engineer-in-Charge. (GROUND FLOOR) |
| 2 | Filling sand-Supplying & filling good clean river sand of approved quality including watering to complete saturation & ramming complete with all leads & lifts including cost, conveyance, royalty & taxes of all materials & cost of all labour & T&P required for the work etc. complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 3 | Providing & laying C.C (1:3:6)with 40mm size C.B.H.G. aggregate with cost, conveyance, royality of all material etc. complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 4 | Providing cement concrete (1:2:4) with 12mm size clean crusher broken granite chips aggregate of approved quality from approved quarry including hoisting, lowering & levelling in position to required level in each layer not exceeding 15cm thick including frame work where necessary ramming using vibrator to proper slope and levelling curing dewatering if necessary with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including supplying and working of pumps and cess as per the specification and direction of Engineer-in-charge. (GROUND FLOOR) |
| 5 | Flyash brick masonary in cement mortar (1:6) in F&P.complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 6 | Fly ash brick masonary in cement mortar (1:6) in superstructure complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 7 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Column Footing] (GROUND FLOOR) |
| 8 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Plinth Band] (GROUND FLOOR) |
| 9 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Column building portion] (GROUND FLOOR) |
| 10 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Wall Beam] (GROUND FLOOR) |
| 11 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Roof slab] (GROUND FLOOR) |
| 12 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Lintel] (GROUND FLOOR) |
| 13 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Chhaja] (GROUND FLOOR) |
| 14 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Shelves] (GROUND FLOOR) |
| 15 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Stair] (GROUND FLOOR) |
| 16 | Cutting,bending,binding,tying&placing at proper position of M.S./T.S. bars incluing cost of steel as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 17 | 12mm thick Cement Plaster (1:6) including cost, conveyance of all materials, labour, T&P etc complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 18 | 16mm thick Cement Plaster (1:6) including cost, conveyance of all materials, labour, T&P etc complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 19 | Fixing ceramic wall tiles of premium grade coloured / printed 6.5mm. to 6.7mm. thick in dados skirting and riser of steps on 12 mm. thick bed of cement mortar (1:3) joined with neat cement slury including rubbing including cost of tiles etc. as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 20 | Fixing marble tiles ( Vitrified tiles) in floors treads or steps on 25mm. thick bed of cement mortar (1:1) joined with neat cement slury including rubbing and polishing including cost of tiles etc.as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 21 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. (GROUND FLOOR) |
| 22 | Supplying,fitting and fixing of M.S. iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge. [M.S. Doors] (GROUND FLOOR) |
| 23 | Supplying,fitting and fixing of M.S. iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge. [M.S. Windows] (GROUND FLOOR) |
| 24 | Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface, including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge. (GROUND FLOOR) |
| 25 | Finishing surface of wall with cement based wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 26 | Distempering two coats with any app. Shade including cost of distemper to inside wall surface over a coat of cement washing etc complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 27 | Finishing walls with water proofing weather coat paints two coats of approved shade on new work over a coat of cement primer including cost carriage of all materials labours etc. complete as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 28 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm. dia of 2mm thick circular pipe with Balustrade of size 32mm. x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as per specification & direction of Engineer in charge. (GROUND FLOOR) |
| 29 | Fly ash brick masonary in cement mortar (1:6) in superstructure complete as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 30 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Column] (1ST FLOOR) |
| 31 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Wall Beam] (1ST FLOOR) |
| 32 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Roof slab] (1ST FLOOR) |
| 33 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Lintel] (1ST FLOOR) |
| 34 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Chhaja] (1ST FLOOR) |
| 35 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Shelves] (1ST FLOOR) |
| 36 | R.C.C. (1:1.5:3) using 12mm. Size c.b.h.g. chips laying compacting watering curing including centering , shuttering complete as per specification & direction of Engineer in charge. [Stair] (1ST FLOOR) |
| 37 | Cutting,bending,binding,tying&placing at proper position of M.S./T.S. bars incluing cost of steel as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 38 | 20mm thick C.P. in CM (1:4) in grading plaster over roof slab including all charges & royalty complete as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 39 | 12mm thick Cement Plaster (1:6) including cost, conveyance of all materials, labour, T&P etc complete as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 40 | 16mm thick Cement Plaster (1:6) including cost, conveyance of all materials, labour, T&P etc complete as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 41 | Fixing ceramic wall tiles of premium grade coloured / printed 6.5mm. to 6.7mm. thick in dados skirting and riser of steps on 12 mm. thick bed of cement mortar (1:3) joined with neat cement slury including rubbing including cost of tiles etc. as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 42 | Fixing marble tiles ( Vitrified tiles) in floors treads or steps on 25mm. thick bed of cement mortar (1:1) joined with neat cement slury including rubbing and polishing including cost of tiles etc. as per specification & direction of Engineer in charge. (1ST FLOOR) |
| 43 | Fixing chequred tiles in floors,treads and landings on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. complete in all respect as per the direction of Engineer in Charge. (1ST FLOOR) |
| 44 | Supplying,fitting and fixing of M.S. iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge. [M.S. Doors] (1ST FLOOR) |
| 45 | Supplying,fitting and fixing of M.S. iron grill gate made out of (45x45x60)mm size angular frame with square bar M.S. flat for grills of approved design icluding all cost conveyance taxes etc. complete.(prevaling lowest local market rate and excluding labour for fixing ) as per direction of Engineer In Charge. [ M.S. Windows] (1ST FLOOR) |
| 46 | Painting two coats in all floors to new wood and iron work over a coat of primer including sand papering,polishing the surface, including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge. (1ST FLOOR) |
| 47 | Finishing surface of wall with cement based wall putty ( water Based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete,as per the direction of Engineer in Charge. (1ST FLOOR) |
| 48 | Distempering two coats with any app. Shade including cost of distemper to inside wall surface over a coat of cement washing etc complete as per the direction of Engineer in Charge. (1ST FLOOR) |
| 49 | Finishing walls with water proofing weather coat paints two coats of approved shade on new work over a coat of cement primer including cost carriage of all materials labours etc. complete as per the direction of Engineer in Charge. (1ST FLOOR) |
| 50 | Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm. dia of 2mm thick circular pipe with Balustrade of size 32mm. x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as per the direction of Engineer in Charge. (1ST FLOOR) |
| 51 | WiringRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group A |
| 52 | WiringRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group B |
| 53 | WiringRecessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard ) Group C |
| 54 | WiringRecessed wiring to Fan Point in... Group B |
| 55 | WiringRecessed wiring to Call Bell Point in... Group C |
| 56 | WiringRecessed wiring to Exhaust Fan Point inGroup B |
| 57 | WiringS/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof. |
| 58 | WiringS/F of Angle holder replacing Ceilling Rose |
| 59 | Swich BoardsS/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board |
| 60 | Swich BoardsS/F of extension board of 4 modular Metal box with modular base & cover in recess including providing and fixing of 1 nos of 3pin 5/6amp modular socket out let & 1 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 61 | Swich BoardsS/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required. |
| 62 | Swich BoardsS/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required |
| 63 | Swich BoardsS/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover. |
| 64 | Swich BoardsS/F of 1 no of 5 pin 15/16 amp. Socket , 1 no of switch & 1 no of 15/16A top with modular mini MCB, in 6 modular box with cover with connection, painting etc as required for Inverter connection |
| 65 | Swich BoardsS/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 2 Modular box with base & cover |
| 66 | Swich BoardsS/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 4 Modular box with base & cover |
| 67 | Swich BoardsS/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 6 Modular box with base & cover |
| 68 | Swich BoardsS/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required. 12 Modular box with base & cover |
| 69 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x1.5+1x1.5 (1.8.1) |
| 70 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x2.5+1x1.5 (1.8.2) |
| 71 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x4+1x1.5 (1.8.3) |
| 72 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) 2x6+1x2.5 (1.8.4) |
| 73 | Sub-MainWiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard) Inverter wiring (1x1.5smm) Copper wire (1.19.1) |
| 74 | Circuit BreakersS/F of 'C' series SP MCB of 10 to 16A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 75 | Circuit BreakersS/F of 'C' series DP MCB of 16 amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 76 | Circuit BreakersS/F of 'C' series DP MCB of 63Amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 77 | Circuit BreakersS/F of 12 Way SPN Double Door Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box (Make : Legrand / Hager / Scheider / Seimens) |
| 78 | Main switchesSupply, Installation testing & commissioning of Main Switches (IS13940 part 3/1993) of following coopacity on existing surface/wall mounting & complete with H.R.C fuse links, inter connections earthing etc as required as per direction of Engineer Incharge (Make-Seimens/HPL/Anchor/L&T /Havels/C&S/R. K.) S/F of 63A ICDP main switch with MS box of 250mmx300mmx60mm deep ( (2.15A)+(1.24.16 ) |
| 79 | EarthingEarthing with G.I. Earth pipe 3 mtr Long 40mm dia ISI marked including accessories & providing masonary enclosure with cover plate having locking arrangement & watering pipe with charcoal & salt as required (3.2) |
| 80 | EarthingSupply & laying 8 SWG Cu wire in recess for loop earthing as required (3.18) |
| 81 | FittingsSupply and fixing of 230mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB ) |
| 82 | FittingsS/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30) |
| 83 | FittingsS/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab / Klite / Panasonic) |
| 84 | FittingsSupply and fixing of 1200mm A.C. Ceiling fan (1 star) with all accessories and connections with out fan regulator (Make:Usha-Striker neo HS/Crompton- Highspeed/Havells-Samrat ES/Anchor- Turbo Speed Star/Orient-Summer Breeze Pro/ Great White - Aldous/ Pollycab - Vital HS ) |
| 85 | FittingsS/F step type modular fan regulator |
| 86 | FittingsSupply & fixing of superior type Led bulk head fitting general domestic use ISI marked square / oval type including necessary connections. ( M-5 ) |
| 87 | FittingsSupply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton /Phillips /HPL /Polycab /Havells / Klite / Panasonic ) |
| 88 | FittingsSupply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 89 | FittingsS/F of 10w Watt LED Bulb ( Make- Crompton/Phillips/HPL/Polycab/Havells / Klite / Panasonic ) |
| 90 | FittingsS/F of 15A socket on 2Modular Board board for A.C |
| 91 | FittingsS/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand) |
| 92 | Area lightingsSupply of 6 mtr long hot dip galvanized Octagonal pole having base dia of 155 mm and top dia of 70 mm and plate thick ness of 4 mm or more complete with base plate 250x250x16mm and 4 nos. Jtype En 8 grade foundation bolts M24X750mm to withstand 180 KM / HR wind speed considering the weight & dimension of One no. Solar lights fixed on the top of the bracket . The Pole must be suiable to withstand 180 KM/Hr wind speed by considering the weight and wind expose area of one no Semi Integrated Solar lights at a height of 6 mtr above ground .Both the Octagonal Pole and EN8 grade fdn bolts must be manufactuered by Octagonal pole manufacturing company. Brackets & EN8 fdn bolts manufactured in third party Supplier/manufacturer shall not be acceptable. Make : - Utkarsh/RR Ispat/Vakrangee) |
| 93 | Area lightingsSupply of 60 W AIO Solar street lights having 150Wp or more highly efficient Monocrystalline PV module & 12.8 V 66 Ah or more ) Lithium Ferrophosphate (LiFePo4) Battery (BIS approved) which shall be inside the extruded aluminium luminaire housing (Theft retardant type), MPPT charge controller having > 92% efficiency & PIR Sensor. The initial lumen output of AIO street light shall be >9600 lumen or more in CCT 6000K (+/-500K) (Lumen efficacy of 160 lm/w ) as per LM 79 report of NABL lab The LED chip will be of OSRAM/NISCHIA/CREE/SEOUL Semiconductor only and should be with lenses for effective lighting distribution. The complete system & BMS should be designed to provide 2 days (24 Hrs) back up in dimming mode by activating PIR sensor and battery should be kept inside the luminaire and Mono Crystalline Panel (Made in India ) to be mounted on the top of the luminaire housing. The luminaire must be having IP 66 protection for critical component like (LED compartment, Driver compartment & Battery) . The AIO street light is having IK 08 .The luminaire should have the provision the tiltable/ adjustable mounting bracket to mount it on the top of the pole directly. Warranty on the AIO street lights must be 5 years . The following test reports/certifications must be submitted for the technical acceptance of the products .Make:Crompton/Panasonic/Havells/Phillips1. LM 79 REPORT NABL lab ) , 2. IK 08 (Report of NABL lab ), 3. IP 66 Report of NABL lab |
| 94 | E.I. Provision for external EI work with service connection for power supply |
| 95 | PH (10 user septic tank (2nos))Earth work in all kinds of soil in excavation of foundation trenches within 50m initial lead including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30 in depth and depositing the soil as per direction of EIC.Initial lift upto 1.50m |
| 96 | PHFrom 1.50m to 3.00m depth |
| 97 | PHSupplying all materials, labour T&P and filling in F&P with river sand well watered and rammed including conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 98 | PHSupplying all materials labour T&P and providing c.c. (1:3:6)using 4cm hg metal including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 99 | PHSupplying all materials labour, T&P and providing c.c. (1:1.5:3) using 12mm hg chips including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 100 | PHSupplying all materials labour T&P and providing brick work with Fly ASh Bricks having c. s. not less than 75Kg/cm2 with dimensional tolerance +-8% in cm (1:3)including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and dir of EIC |
| 101 | PHSupplying all materials labour T&P and providing c.c. (1:1.5:3) using 12mm hg chips for RCC works including hoisting laying, watering, curing, conveyance of all materials to work site payment of royalty taxes etc. all complete as per specification and direction of EIC |
| 102 | PHSupplying all materials labour T&P and providing MS reinforcement for RCC works including cutting, bending, binding and tying the grills and placing in position including cost of binding wire and 18 to 20 gauge conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC.- |
| 103 | PHSupplying all materials labour T&P and providing rigid and smooth centering and shuttering for RCC works including false work and dismantling them after casting including conve4yance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC- |
| 104 | PHSupplying all materials labour T&P and providing cement plaster on brick/stone work including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 105 | PH Supplying all materials labour T&P and providing cement punning including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC. |
| 106 | PH Supplying all materials labour T&P and providing cement flush pointing to brick masonry (1:3) including watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per specification and direction of EIC |
| 107 | PH Filling F&P with excavated materials including watering and ramming as per direction of EIC |
| 108 | PH Supplying all labour materials T&P and fixing of 2 inch RCC baffle wall precast with cc (1:1.5:3) using 12mm bhg chips for fitted to septic tank as per PH specification and direction of EIC |
| 109 | PH Supplying all materials labour T&P and providing fitting and fixing SW Tee in wall including filling the necessary with cement concrete (1:2:4) with 12mm size hg chips all complete materials to as per specification and dir of EIC.100x100x100mm PVC Tee/Y |
| 110 | PH Supplying all labour materials T&P and fixing of MS step iron in 20mm dia MS steel bar and fixing into walls of septic tank duly embedded in c.c. (1:3:6) all complete as per PH specification and direction of EIC- |
| 111 | PH Supplying all materials labour T&P and providing precast RCC manhole cover with cc (1:12:3) of 12mm hg chips including conveyance of all materials to site after payment of royalty and taxes etc. all complete as per PH specification and direction of EIC-(size 550mmx550mmx76mm) |
| 112 | PH Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C |
| 113 | PH Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter. |
| 114 | PH Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.Ground Floor |
| 115 | PH Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor |
| 116 | PH Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC. |
| 117 | PH Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall |
| 118 | PH 375mm thick wall |
| 119 | PH supplying all materials, labour, T&P and cutting holes in R.C.C Floors, roofs etc upto 19mm thick for passing G.I/PVC pipes and fittings and repairing the holes after insertion of pipes etc with C.C (1:2:4) including finishing complete so as to make it leak proof etc. all complete as per P.H. specification and direction of E.I.C. |
| 120 | PH Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C. |
| 121 | PH Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral S trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with S trap plain(Neycer/ Parry ware/ Cerra) |
| 122 | PH Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. |
| 123 | PH Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC110mm dia UPVC SWR Pipe |
| 124 | PH 110mm dia U-PVC P. Trap |
| 125 | PH 110mm U-PVC S/J with Door |
| 126 | PH 110mm U-PVC door bend |
| 127 | PH 110mm dia U-PVC Plain bend |
| 128 | PH 110mm U-PVC Plain Tee |
| 129 | PH 110mm U-PVC Cowl |
| 130 | PH 125mm dia CP Grating |
| 131 | PH 75mm dia U-PVC SWR Pipe |
| 132 | PH 75mm dia U-PVC Plain Tee |
| 133 | PH 75mm U-PVC Door Bend |
| 134 | PH 75mm U-PVC Plain Bend |
| 135 | PH Supplying all materials labour T&P and fixing wash kitchen sink/laboratory sink with CI/MS brackets painted white including holes in walls and making good the damages etc. all complete as per PH sp and dir of EIC610x510x200 mm Stainless Steel kitchen Sink |
| 136 | PH Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC.550x400mm WHB-( Paryware/Nycer/ cerra ) |
| 137 | PH Pedestral 550x400mm WHB |
| 138 | PH Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror |
| 139 | PH Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail |
| 140 | PH Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC |
| 141 | PH Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp revolving shower . |
| 142 | PH Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf |
| 143 | PH Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern |
| 144 | PH Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap KB Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap |
| 145 | PH Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, Ist class KB Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber |
| 146 | PH Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.0.91m dia x 2.10m deep |
| 147 | PH Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and Ist class KB Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit |
| 148 | PH Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.110mm dia with allround encasing |
| 149 | PH Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor testing all complete as per specification and dir of EIC. 20mm dia C-PVC Pipe(Internal) |
| 150 | PH 25mm dia PVC(ASTM) pipe(External) |
| 151 | PH 32mm dia PVC(ASTM) pipe(External) |
| 152 | PH Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC.15mm dia CP pillar cock Plaza/Amber Deluxe |
| 153 | PH 20mm dia cp concealed stop cock Plaza/Amber Deluxe |
| 154 | PH 15mm dia cp angle stop cock Plaza/Amber Deluxe |
| 155 | PH 15mm dia cp bib cock S.B. Plaza/Amber Deluxe |
| 156 | PH 15mm dia cp bib cock L.B. Plaza/Amber Deluxe |
| 157 | PH 15mm dia CP Two way bib Cock Plaza/Amber Deluxe |
| 158 | PH Health Fuccet Plaza/Amber Deluxe |
| 159 | PH 15mm dia CP flange Plaza/Amber Deluxe |
| 160 | PH 15mm dia CP Extension piece Plaza/Amber Deluxe |
| 161 | PH 25mm dia PVC Valve |
| 162 | PH Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC. 2000 lit sintex tank (First Floor) |
| 163 | PH Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.2000 ltr capacity masonry staging ( First floor) |
| 164 | PH Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C. |
| 165 | PH Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC. |
| 166 | PH Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC. |
| 167 | PH Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 168 | PH Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC. |
| 169 | PH Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe) |
| 170 | PH ( SINKING OF TUBE WELL )Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 125mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well. PH a) Labour for Drilling i) 0.00 mtr to 91.00 mtr & above |
| 171 | PH Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.PH a) Lowering of 125mm dia PVC casing pipe i) From 0 mtr to 30.00m and above |
| 172 | PH Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.PH b) Cost of 125mm dia PVC casing pipe (80 Sch)i) From 0 mtr to 30.00m and above |
| 173 | Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge. |
| 174 | Supplying all labour T&P & materials for construction of bore protection chamber etc. all complete as per PH specification and direction jof Engineer-in-charge. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
