|
| 1 | (1/2.1) Earth work in excavation by mechanical means (Hydraulic excavator) manual means in foundation trenches or drains (Not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m |
| 2 | (2/16.12.1)Dry brick pitching half brick thick in drains including supply of bricks and preparing the surface complete. |
| 3 | 3/4.1.5 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level |
| 4 | (5.22.) Steel reinforcement of R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D |
| 5 | (5.22. A) Steel reinforcement of R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level 5.22.6 Thermo-Mechanically Treated bars of grade Fe-500D |
| 6 | (5.9) Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1 Foundations, footings, bases of column etc. for mass. |
| 7 | (5.9.6) Column, Pillars, piers, Abutment, Posts and struts column |
| 8 | (5.9.5) Lintels, beams, plinth beams, girders, bressumers and cantilevers Top Beam |
| 9 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement- All work upto plint level… |
| 10 | (5.2.2) Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, column, pillars, piers, abutment, posts and struts etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: |
| 11 | (6.1) Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in foundation and plinth in 6.1.1 cement mortar 1:4 |
| 12 | (2.25 a) Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth sides of foundation etc. complete. |
| 13 | (6.13) Half brick masonry with common burnt clay F.P.S. (Non modular) bricks of calss designation 7.5 in superstructure above plinth level upto floor V level 6.13.2 cement mortar. |
| 14 | (11.3) Cement concrete flooring 1:2:4 floating coat of neat cement, including cement slurry, but excluding the cost of noising of steps etc. |
| 15 | (8.31) Providing and fixng 1st quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacture) of approved make in all colours shades except burgundy, bottle green, black of any size as approved by Engineer -in-charge, in skirting, risers of steps and dados,over 12 mm thick bed of cement mortar 1:3.......... |
| 16 | (13.2) 15 mm cement plaster on the rough side of single or half brick wall of mix : 13.2.1. |
| 17 | (10.2) Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 18 | (12.50) Providing and fixing precoated galvanised iron profile (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams, per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 mtr.... |
| 19 | (12.51) Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS:277, im 240, mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyster to coat 15-18 using self drilling/self tapping screws complete. |
| 20 | (9.48.2) Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 21 | (13.8) Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 22 | (13.81) Distemparing with 1st quality acrylic distempering, having VOC (Voltage Organic Compound) content less than 50 grams/litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour 13.82.2 two coats. |
| 23 | (13.44) Finishing walls with water proofing cement paint of required shade : 13.44.1 New work (Two or more coat applied @3.84 kg/10sqm) |
| 24 | (9.7) Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete |
| 25 | (9.96.1) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC10 as per IS: 1868) transparent or dyed to required) |
| 26 | Electrification work……….(L/S) |
| 27 | Providing & fitting Sign board Please Enable Macros to View BoQ information |
