Name of Work:- Repair of Non-Operational Modules(Lab 1, Lab 2, Lab 5 & Office Room 2) of HRDC Building
Sl. No.
Item Description
1
Stripping off worn out plaster and raking out joints of walls,celings etc.upto any height and in any floor including removing rubbish within a lead of 75m as directed.
2
Plaster (to wall, floor, ceiling etc.)with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (in all floor).[Excluding cost of chipping over concrete surface] With 1:4 cement mortar 15 mm thick plaster
3
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC In All Floors (Two Coats) Solvent based interior grade Acrylic Primer
4
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling includings and papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : In all floors (Two coats) Luxury Quality
5
Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T2430/1510 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long,Cross Tee 1200mm/600mm long and Wall Angle.The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm.The Cross Tee 1200 mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid ofmodulesize600mmX600mmshallbesupportedby6mmdia G.I. wire from purlins / soffit. 4mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density>1300Kg/m3) of size 595mm X 595mm, conforming IS 14862 & TypeB Category III of ISO 8336, tested as per AS-1530 part 3& BS-476 Part 4,5,6,7 & 8,should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling (with 4mm thick Fibre Cement Standard Ceiling Board and EGrid T-2430/1510).
6
Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water inproportion(1 bonding agent :4 water:6 cement)as per Manufacturer's specification [Cement to be supplied by the Department] Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
