|
| 1 | B/R WORKS :Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 but n. exc. 4 sqm each and refixing in same opening after repair work complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm each complete all as specified and directed. |
| 3 | S&F Providing and fixing factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Sliding Door (three track, 2/4 shutters) E(1) Three track sliding frame (88mm x 52mm) all complete and as directed, (Glazing, hardware hinges and fitting, EPDM rubber gasket etc. to be paid separately.)Note:-Each member of window to be measured separately wrth clear length complete all as specified and directed. |
| 4 | S&F Providing and fixing factory made uPVC white colour Sliding window Three track made of extruded profileswith wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm),Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drillingof holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated),steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)(A) Area not exceeding 2.00 sqm each complete all as specified and directed. |
| 5 | M&L for Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer in-charge |
| 6 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frame size 65x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed. |
| 7 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 8 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed. |
| 9 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 10 | S&F Non- skid Ceramic coloued tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and incl 15mm thick screed layer in CM 1:6 complet all as specified and directed. |
| 11 | S&F Non- skid Ceramic coloued tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match colour of tiles over and incl rendering 10mm thick in CM 1: 3 even and rough to recieve tiles complete all as specified and directed. |
| 12 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and incl complete all as specified and directed.. |
| 13 | M&L over and incl rendering 10mm thick in cement mortar (1:3) on fair faces of brick work as in vertical surfaces for laying tiles complete all as specified and directed. |
| 14 | M&L Glazed ceramic tiles in vertical surface 350x 450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles complete all as specified and directed. |
| 15 | S&F 100 mm size, butt hinges, extruded medium weight cold rolled mild steel etc complete all as specified and directed. |
| 16 | M&L 100 mm long Aluminium, anodised, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 17 | S&F 100mm size, aluminium anodised handle, fabricated type complete all as specified and directed. |
| 18 | M&L 150 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 19 | S&F 150mm size, aluminium anodised handle, fabricated type complete all as specified and directed. |
| 20 | S & F Aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clipes of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, length of bolt of 250 mm long complete all as specified and directed. |
| 21 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq.m. each pane complete all as specified and directed. |
| 22 | S & F stainless steel wire cloth, 036 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.complete all as specified and directed. |
| 23 | S&F in repairs Vitreous china wash basin, white flat back, size 550mm x 400mm with brackets, excluding pillars cock but, PVC connection of 450mm long including PVC (HDPE) 32mm bore waste pipe, brass couplings 32mm CP etc complete all as specified and directed. |
| 24 | S&F 15mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 25 | S&F in repairs 600 x 450mm beveled edged mirror or selected quality glass mounted on 6mm thick AC building board or commercisl plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers.complete all as specified and directed. |
| 26 | S&F in repairs, stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bhoth ends for iron pipe or for unions as specified and directed complete all as specified and directed. |
| 27 | S&F in repairs 15mm bore PVC connection pipe 450mm longh with PTMT nuts at both ends complete all as specified and directed. |
| 28 | S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level with inlet. Ball valve, float bracket & flush pipe complete all as specified and directed. |
| 29 | S&F in repairs 15mm bore Bib Taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwex for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 30 | Demolition and breaking up 100mm bore drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all as specified and directed. |
| 31 | S&F 110mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 32 | S&F 110mm bore PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches complete all as specified and directed. |
| 33 | S&F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete all as specified and directed. |
| 34 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 35 | S&F in repairs, PVC (SWR) junction, single T equal or unequal 110mm bore complete all as specified and directed. |
| 36 | S&F in repairs, PVC (SWR) 75 mm bore, floor trap ,plain with grating including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4.complete all as specified and directed. |
| 37 | S&F in repairs, 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 38 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern omplete all as specified and directed. |
| 39 | S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms) complete all as specified and directed. |
| 40 | Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches, pillars etc complete all as specified and directed |
| 41 | M & L brickwork bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4.complete all as specified and directed. |
| 42 | M&L brickwork using old size well burnt Sub class 'B', straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed. |
| 43 | Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 44 | M&L for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with CM (1:4) anf finished even and smooth without using extra cement complete all as specified and directed. |
| 45 | M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed.. |
| 46 | Taking up or down 15 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 47 | S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed including taking down old one complete all as specified and directed. |
| 48 | Taking up or down 20 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 49 | S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall and ceiling or laid in floors etc complete as specified and directed . |
| 50 | S&F for Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed. |
| 51 | S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 52 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 53 | S&F in repairs, Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed. |
| 54 | M&L for preparation newly plaster surfaces of wall, chajja facia etc with putty 1-2mm thick and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489=2004 alkali and fungal resistant exterior paint of required shed (company depot limited) with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with pro guaeds technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 55 | M&L for preparing of new plastered surfaces of walls & applying plaster of paris putty of 3 mm thickness over plastered surface to prepare the surface even and smooth etc and applying two coats of oil bound distemper etc complete all as specified and directed. |
| 56 | M&L for preparation of old distempered surfaces of walls by washing, rubbing down, stopping nail holes, fillings cracks with putty etc and applying one coat of distemper oil emulsion complete all as specified and directed. |
| 57 | M&L for preparation of old surfaces of ceiling and applying one coats of white wash etc complete all as specified and directed. |
| 58 | Dismantling water tanks and removing to store Exc 500 & n.exc 1000 Ltrs complete all as specified and directed. |
| 59 | S&F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 60 | S&F 20 mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrulecomplete all as specified and directed. |
| 61 | S&F 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 62 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 63 | S&F in repairs for vitreous china bowl urinal flat back,size of 465x355x265mm white (minimum) including providing and fixing plugs bedding urinal against wall in cement motar 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement;fixing cistern with brackets flush pipe grating and Union for discharge pipe.( Exclusive of fixing supply pipe grating and union for discharge pipe(excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed |
| 64 | M&L 75 mm thick , plain cement concrete 1:4:8, type D-2 (ussing 40mm graded stone aggregate ) as in sub base of flooring compete all as specified direected. |
| 65 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 66 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including fabrication etc complete all as specified and directed. |
| 67 | Supply only water proofing compound for external plaster. (Make : Sika/Cico) complete all as specified and directed. |
| 68 | S&F 2mm dia curtain rails, anodised aluminium alloy with fixing brackets, stops, rollers etc fancy type end capscomplete all as specified and directed. |
| 69 | E/M WORKS :Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed. |
| 70 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. |
| 71 | Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair all complete all as specified and directed. Please Enable Macros to View BoQ information |
| 72 | Taking down fan, sealing cable end, dismantling blades and removing fan and keeping it in MES store for safe custody and refix it after repair all complete all as specified and directed. Please Enable Macros to View BoQ information |
