|
| 1 | B/R WORKS :Taking down chowkhats or frames with shutter (without taking off shutter from the frame)exe 1.50 but n. exc. 4 sqm in each complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exe 1.50 sqm in each complete all as specified and directed. |
| 3 | S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc. complete all as specified and directed. |
| 4 | S&F 35 mm thick, 2nd class hardwood plain,Factory made Flush shutters,solid core construction, with block board core and plywood face panels, commercial type on both sides complete as specified and directed. |
| 5 | S&F 35mm thick, 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete as specified and directed . Sizes of members of shutters as specified in SSR Part I, Section -8, clause 8.24(a).complete all as specified and directed. |
| 6 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification and drawin complete all as specified and directed. |
| 7 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly as per specification & drawing., Section -8, clause 8.24(a). |
| 8 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-16 complete all as specified and directed. |
| 9 | S&F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 incljuding fabrication etc complete all as specified and directed. |
| 10 | M&L cement concrete Type B1 (1:2:4) 20mm graded stone aggregate plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 11 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 12 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed. |
| 13 | S&F powder coating Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified including powder coating of minimum 50 micron thickness complete all as specified and directed. |
| 14 | S&F Powder coating anodised aluminium window and ventilator shutters, side hung type without sash, aluminium sectiion weighihg 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber e packing, anodised handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed. |
| 15 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement complete all as specified and directed. |
| 16 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq.m. each pane complete all as specified and directed. |
| 17 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with puttty or fixed with beads complete all as specified and directed. |
| 18 | S&F 100 mm size, butt hinges, extruded medium weight cold rolled mild steel etc complete all as specified and directed. |
| 19 | S&F 75 mm size, butt hinges, extruded medium weight cold rolled mild steel etc complete all as specified and directed. |
| 20 | S&F 150mm size, aluminium anodised handle, fabricated type complete all as specified and directed. |
| 21 | S&F 100mm size, aluminium anodised handle, fabricated type complete all as specified and directed. |
| 22 | M&L for 150 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 23 | M&L for 100 mm long mild steel, barrel tower bolts of extruded section etc complete all as specified and directed. |
| 24 | S&F Mild steel sliding door bolts,250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and directed. |
| 25 | S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 26 | S&F in repairs aluminium alloy Tubular towel rail 20mm dia chromium plated with fixing brackets, stops, rollers and fancy type end cap etc complete all as specified and directed. |
| 27 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staplescomplete all as specified and directed. |
| 28 | M&L for preparation of new untreated wood and wood based surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 29 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 30 | M&L for preparation of old wooden surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 31 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 32 | Dismantling of plain or corrugated roof steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coveringscomplete all as specified and directed. |
| 33 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 34 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ as in ridge, fixed with ixed with self tapping screws complete all as specified and directed. |
| 35 | S&F 1mm thick 150mm dia Mild steel sheet eaves gutters, made out of galvanised sheet, half round with rounded edges complete all as specified and directed. |
| 36 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed. |
| 37 | M&L for Cutting out cracks to V-section in existing terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and directed. |
| 38 | M&L for Bitumen blown any grade, applied hot, two coats, to concrete surfaces at the rate of 1.5 Kg per Sq. m. per coat complete all as specified and directed. |
| 39 | S&F for APP based polymeric membrane minimum weighing 3Kg/sam and minimum 3mm thick reinforced with polyster non wove fabric (wt, not less than 150 gms/sqm) land on primed surfacfe by forced application complete all as specified and directed. |
| 40 | M&L for 25mm thick cement concrete B-0, 1:2:4 (12.5mm graded aggregate) as in levelling layer and roof finishing surfaces even and fair complete all as specified and directed. |
| 41 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 42 | M & L PCC 1:3:6 type C-2 (50 mm) thick ( 40mm graded aggregate) thick as in plinth protection/Hard standing , etc finishing cement concrete surface even & fair whthout using extra cement making joints with bitumastic filling in proportion of bitumen and sand 1:2 complete all as specified and directed. |
| 43 | Demolition of cement concrete (unreinforced) in ground floor and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 44 | M&L of Cement concrete type C2 1:3:6 (40mm graded aggregate) as in surface channels and drains incl form work complete all as specified and directed. |
| 45 | M&L Extra for forming fair finishing to drains or channel of 30 cm inner girth in cement concrete with using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 46 | M &L RCC 1:2:4 type B-1 precast concrete as in cover slab set in CM (1:4) including necessary form work complete all as specified and as directed. |
| 47 | Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets as directed complete all as specified and directed. |
| 48 | S&F 605x605mm Anodised aluminium snap grid frame work for false ceiling complete all as specified and directed. |
| 49 | S&F Hangers 6mm dia G.I (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilinhg cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed. |
| 50 | M&L for 6mm thick high pressutre, oceanic pre-primed, self embossed, non-asbestos fibre cement decorative board , water, termite and fire resistant for insulatrion and acoustic piurpose fixed or laiod/inserted to timber/GI/Aluminium framework with screws complete all as specified and directed. |
| 51 | MS TMT bars 8 to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia as in reinfocemetn complete all as specified and directed. |
| 52 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed. |
| 53 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles over and incl 15mm thick scrteed layer in CM 1:4 complete all as specified and directed. |
| 54 | M&L for Glazed ceramic tiles in vertical surface 350x 400x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles over and incl 1mm thick rendering in CM (1:4) finished even and rough to recieve tiles complete all as specified and directed. |
| 55 | S&F of 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 56 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 57 | S&F Aluminium Door closer hydraulicallyy regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed. |
| 58 | Dismantling water tanks of capacity exc 500 & n.exc 1000 Ltrs complete all as specified and directed. |
| 59 | S&F Rotational moulded polyethylene water storage tanks 1000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 60 | S&F 15mm bore ball brass valves high pressure, with polythene float & fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 61 | S&F 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 62 | S&F in repairs Vitreous china wash basin, white flat back, size 550mm x 400mm with brackets, excluding pillars cock 15mm bore CP, PVC connection of 450mm long including PVC (HDPE) 32mm bore waste pipe, brass couplings 32mm CP etc complete all as specified and directed. |
| 63 | S&F 15mm bore Brass CP basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed. |
| 64 | S&F in repairs 600 x 450mm beveled edged mirror or selected quality glass mounted on 6mm thick AC building board or commercisl plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and directed. |
| 65 | S&F in repairs, stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed bhoth ends for iron pipe or for unions as specified and directed. |
| 66 | S&F in repairs 15mm bore PVC connection pipe 450mm longh with PTMT nuts at both ends complete all as specified and directed. |
| 67 | S&F in repairs, 10 Litres capacity PVC valveless syphonic action type, dual type flushing cistern (ISI marked), low level with inlet. Ball valve, float bracket & flush pipe complete all as specified and directed. |
| 68 | S&F in repairs 15mm bore Bib Taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwex for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 69 | Dismantling 100mm bore, Cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required complete all as specified and directed. |
| 70 | S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, fixed to walls complete as specified and directed. |
| 71 | S&F 110mm PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in trenches complete as specified and directed. |
| 72 | S&F PVC (SWR) pipes single sockets, in any length with rubber ring joints, laid in ground or floors 75mm dia complete all as specified and directed. |
| 73 | S&F 110mm bore PVC (SWR) bends of any radius complete all as specified and directed. |
| 74 | S&F in repairs, PVC (SWR) junction, single T equal or unequal 110mm bore complete all as specified and directed. |
| 75 | S&F in repairs, PVC (SWR) 75 mm dia, floor trap ,plain with grating including jointing to waste pipe with solvent cement and fixing in PCC 1:2:4 complete all as specified and directed. |
| 76 | S&F in repairs, 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 77 | S&F in repairs Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and as directed. |
| 78 | S&F in repairs 32mm dia Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms/40mm-60 gms) complete all as specified and directed. |
| 79 | Demolition of brick work or stone/boulder masonry, built in cement morter including all quoins, arches, pillars etc complete all as specified and directed. |
| 80 | M & L brickwork with sub-class' B' well burnt old size bricks,straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 81 | M&L brickwork with subclass well burnt old size bricks, straight or curved on plan exc 6m mean radius built in cement motar 1:6 and complete all as specified and directed. |
| 82 | Taking down cement plaster on brick or stone or concrete surfaces of wall etc , icluding raking out joints , hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 83 | M&L for rendering 10mm thick on fair face of brick works or concrete surfaces of walls with CM (1:4) anf finished even and smooth without using extra cement complete all as specified and directed. |
| 84 | M&L for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed. |
| 85 | M&L for rendering 5mm thick in ceilings of concrete surfaces with CM (1:3) and finished even and smooth without using extra cement complete all as specified and directed. |
| 86 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 87 | M&L for preparation newly plaster surfaces of wall, chajja facia etc and applying two coats of 100% premium Acrylic emulsion paint having VOC less than 50 gm/litre and UV resistant as per IS-15489=2004 alkali and fungal resistant exterior paint of required shed (company depot limited) with silicon additives 1/43 litres/10 Sqm over and including primer applied 0.90 litres/.10 sqm over new surfaces using Airless spray technology with maximum working pressure of 3300 PSI and capable of operating single spray gun with a maximum material hose length of 30 Mtr, the spray machine whould be of reputed manufacturer with pro guaeds technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and acessories complete all as specified and directed. |
| 88 | M&L for Complete removal of existing treatment and treating from walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new plastered surface even and smooth complete all as specified and directed |
| 89 | M&L for preparing of new plastered surfaces of walls & applying3 mm thick wall care putty to make the surface even and smooth and applying two coats of oil bound distemper over one coat of primer etc complete all as specified and directed. |
| 90 | M&L for preparation of old decorated plastered or unplastered sufaces of wall, cornices etc by brooming down or steel wire brushing, scrapping down, smoke soot, moulds, moos efflorescent and trading oil and greasy spots and applying two coat of cement base paint (white or tinned) complete all as specified and directed. |
| 91 | M&L for complete removal of old plastered surfaces of ceiling and applying three coats of white wash etc complete all as specified and directed. |
| 92 | Taking up or down 15 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 93 | Re-fixing 15mm bore old steel tubes,with all new fittrings and fixed, to walls or laying in floors complete all as specified and directed. |
| 94 | S&F steel tubes, galvanised 15 mm bore, medium grade with all fittings & fixed complete to wall or laid in floors etc complete as specified and directed including taking down old one. |
| 95 | Taking up or down 20 mm bore steel tubing and connections, including removal to store complete all as specified and directed. |
| 96 | Re-fixing 20mm bore old steel tubes,with all new fittrings and fixed, to walls or laying in floors complete all as specified and directed. |
| 97 | S&F steel tubes, galvanised 20 mm bore, medium grade with all fittings & fixed complete to wall or laid in floors etc complete as specified and directed . |
| 98 | S&F in repairs 20mm dia curtain rails, mild steel, aluminium alloy chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed. |
| 99 | S&F for Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms complete all as specified and directed. |
| 100 | S&F for Grating doom 100mm dia of PTMT (Minimum weight 25gms) complete all as specified and directed. |
| 101 | S&F for Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 102 | S&F in repairs, Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed. |
| 103 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl complete all as specified and directed.size 410mm x 330mm x 160mm |
| 104 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 105 | S&F in repairs vitreous china wash down water closet pan (Pedestal pattern) with seat cover white with 'P' or 'S' trap, including and flushing pipe etc complete including making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing specifications as specified (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed. |
| 106 | E/M WORKS :Taking down carefully old unsv copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets,sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed |
| 107 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
| 108 | Taking down carefully MCB DBs any type and size by unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed. Please Enable Macros to View BoQ information |
