|
| 1 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of cement concrete or lime concrete (unreinforced) in ground floors and Pavings not exc 15 cm thick (below or above ground level ) and removing the debris outside from defence land complete all as specified and directed by Engr-in-Charge. |
| 3 | Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed.Note:- Demolition will be done only by mechanical cutter only complete all as specified and directed by Engr-in-Charge. |
| 4 | Demolition of brick work , built in cement mortar or cement lime mortar including all quions, arches, pillars, etc including demolition of precast rcc articles and disposal of debris out of MoD land complete all as specified and directed by Engr-in-Charge. |
| 5 | Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and directed by Engr-in-Charge. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge. |
| 7 | Dismantling timber scantlings 40 sq.sm and over in section, in any position complete all as specified and directed by Engr-in-charge. |
| 8 | Dismanting of Asbestos cement (corrugated, semi corrugated, Plain etc) sheets in roof coverings etc complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking up or down 15mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 10 | Taking up or down 20mm bore, steel tubing and connection including cleaning for refixing or removal from site complete all as specified and directed by Engr-in-Charge. |
| 11 | Demolition and breaking up drain pipes (Salt glazed ware, PVC/AC or Reinforced concrete) set in cement mortar,and taking out of trenches, if required, Internal dia of pipe in 75MM/100mm complete all as specified and directed by Engr-in-Charge. |
| 12 | Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75MM/110mm complete all as complete all as specified and directed by Engr-in-Charge. |
| 13 | Taking down chowkhats or frames exc 1.50 and n.exc 4 Sqm each (without talking off shutters from the freme)complete all as specified and directed by Engr-in-Charge. |
| 14 | Taking down chowkhat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 15 | Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 16 | Hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 17 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L for joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 19 | M&L for joint free non skid coloured Ceramic tiles 08mm to 10mm thick (square/ rectangular) polished, area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in vertical surface such as skirtings, dados and risers to step, etc etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick cement plastere in CM 1:4 complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 20 | M&L for joint free non skid coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 21 | M&L for joint free non skid coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in skirtings, dados and risers to step etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick cement plastere in CM 1:4 complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 22 | M&L for coloured Glazed ceramic tiles in vertical surface such as wall,dado etc 450mmX 300mmX 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:3 including dismantling of wall tile complete all as specified and directed by Engr-in-Charge.Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles. |
| 23 | M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match complete all as specified and directed by Engr-in-Charge..Note:-The texture ,colour ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles and Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.& Brushing neat cement slurry with 3.0kg of cement per sqmetre |
| 24 | M&L for 16-18 mm thick granite (pure black) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade or granite over including 20mm thick screed bed or bedding layer in cement mortar 1:4 etc complete all as specified and directed.Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded complete all as specified and directed by Engr-in-Charge. |
| 25 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 26 | M&L for Machine cut kota stone slab flooring 20-25mm thick Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including cement plastere 10mm thick in CM 1:3 complete all as specified and directed by Engr-in-Charge. |
| 27 | M&L for Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in mass concrete,sub base, sub floor etc complete all as specified and directed by Engr-in-Charge. |
| 28 | M&L for 75 mm thick Cement concrete 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in,sub base, sub floor etccomplete all as specified and directed by Engr-in-Charge. |
| 29 | M&L for 25mm thick Cement concrete Type B-1,1:2:4 (using 20 mm graded crushed stone aggregate) as in sub base for receiving floor tiles and mass concrete complete all as specified and directed by Engr-in-Charge.Note:- Finishing surfaces of concrete to be even and rough to receive the topping layer or floor tiles etc |
| 30 | M&L for 100 mm thick Cement concrete in sub floor, sub base, floors and pavings,etc concrete Type D-2,1:4:8 (using 40 mm graded crushed stone aggregate) complete all as specified and directed by Engr-in-Charge.Note:- Finishing surfaces of concrete to be even and rough to receive the topping layer or floor tiles etc |
| 31 | M&L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for RCC type B-1 (1:2:4) using 20 mm graded crushed stone aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like such as cover slab of septic tank/soak well etc complete all as specified and directed by Engr-in-Charge. Note:- Reinforcement shall be measured and paid separately). |
| 33 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; not exc. 200mm thick (Horizontal or sloping) Rough finished surfaces of concrete flat complete all as specified and directed by Engr-in-Charge. |
| 34 | M&L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate, in cover slabs( for manholes etc.)chulla hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. (Reinforcement shall be measured and paid separately). |
| 36 | M&L for Brickwork with sub class 'B' brick old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed by Engr-in-Charge. |
| 37 | All as per srl item No. 36 here-in-before but except brick work in cement mortar (1:6) complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for brickwork with sub class 'B' old size bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 39 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cm 1:4 mixed with liquid water proofing compound finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 40 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces of wall in cm 1:6 finishing surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L for rendering 5mm thick on fair faces of brick work or concrete surfaces in CM (1:3) as on ceiling complete all as specified and directed by Engr-in-Charge. |
| 42 | M&L for 25mm thick plaster in two coat (15 mm + 10 mm) on rough concrete surfaces of fin, facia, chhajja and similar article in cm 1:3 mixed with liquid water proofing compound finished even and smooth without using extra cement in any height complete all as specified and directed by Engr-in-Charge. Note :- Two coat plaster shall be carried out as mentioned in clause 14.18 of SSR-2009, Part-I. |
| 43 | M&L for Providing and applying Birla/Altek wall care putty of 1-2 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engr-in-Charge. |
| 44 | M&L for preparation of newly plastered internally surfaces of wall and applying one coat of primer (as per manufacturer’s recommendations) on the surfaces and applying two coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L for Preparing newly plaster surfaces of wall & applying two coats of cement base paint over a priming plastered and other surfaces with alkali-resistance Primer without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L for preparation of old plastered internally surfaces of wall one coats of distemper oil emulsion finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. |
| 48 | M&L for preparation of old plstered surface and apply one coat of acrylic water based exterior grade emulsion @ 0.9 ltr ( undiluted)/10sqms dilluted with water in 1:1 ratio finished without any brush marks on the surface in any colour including necessary scaffolding up to four storeys height of bldgs if required ,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F rolled mild steel any sections as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. |
| 51 | S&F Pre- painted galvalume aluminum zinc coating AZ-150 GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 52 | S&F Pre- painted galvalume aluminum zinc coating AZ-150 GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge. |
| 53 | S&F 15mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 54 | Fixing only 15mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) |
| 55 | S&F 20mm bore Steel water tubing 'medium grade', galvanised with all fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge. |
| 56 | Fixing only 20mm bore old Steel water tubing including all new galvanized fittings like elbow, tee, socket, bend etc and fixed to wall, ceiling or laid in floor complete all as specified and directed by Engr-in-Charge.Note: - Old Steel water tube/pipe any type retrieved from taking down shall be used along with all new GI fittings) |
| 57 | Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed by Engr-in-Charge. |
| 58 | S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 59 | S&F in repair Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including inlet & outlet tank nipple 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F Rotational moulded polyethlene water storage tanks three layers of 1000 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including inlet & outlet tank nipple 20 mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and directed by Engr-in-Charge. |
| 62 | S&F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair stop valves (ISI marked), 15mm dia, cast copper alloy,chromium plated fancy type with long shank and cup(concealed type) screwd down,high pressure with crutch or butter fly handle,screwed both ends for iron pipes or for unions and fixed in pipe complete all as specified and directed by Engr-in-Charge. |
| 64 | S&F in repair 15mm bore fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge. |
| 65 | S&F in repair Brass CP wash hand basin mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15mm bore complete all as specified and directed by Engr-in-Charge. |
| 66 | S&F in repair Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge. |
| 67 | S&F in repair 5mm thick looking mirror of size 600x450mm of selected quality glass mounted on 6mm thick AC building board or commercial plywood and aluminium angle beading around mirrior fixed on wall PVC plug and screws etc complete all as specified and directed by Engr-in-Charge. |
| 68 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed by Engr-in-Charge. |
| 69 | S&F in repair Vitreous China wash down water closet pan including P or S trap of bore 125/110 mm (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern ) including flush pipe of polythylene of low or high density or PVC 32 mm dia, for low levwl cistern including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and wash down water closet complete all as specified and directed by Engr-in-Charge. |
| 70 | S&F in repair viterous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, witht integral foot rests (excluding flushing cistern and flush pipe) including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. including flush pipe of polythylene of low or high density or PVC 32 mm dia, for low levwl cistern complete including making good to floor complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F in repair for Viterous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and waste pipe (excluding flushing cistern, flush pipe ) complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in repair Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F in repair Stainless Steel Soap Dish or Soap Holder Dish for Bathroom with fixing arrangement complete all as specified and directed by Engr-in-Charge. |
| 74 | S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed by Engr-in-Charge. |
| 75 | S&F Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed by Engr-in-Charge. |
| 76 | S&F in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed by Engr-in-Charge. |
| 77 | S&F in repair Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand including waste coupling of 32/40mm bore and waste pipe complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F in repair of brass chromium plated health faucet with 1m long PVC tube & wall hook. screwed for 15mm dia bore iron pipe or 2 in one tap complete all as specified and directed by Engr-in-Charge. |
| 79 | S&F in repair of single Piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fittings Size: 360x725 x735 mm, S Trap-300 mm white with combined flush tank (Cascade type) incl seat covers complete all as specified and directed by Engr-in-Charge. |
| 80 | S&F in repair sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm including waste coupling of 32/40mm size complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F in repair 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes complete all as specified and directed by Engr-in-Charge. |
| 82 | S&F PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge.(ISI MARKED) |
| 84 | S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed by Engr-in-Charge..(ISI MARKED) |
| 85 | S&F in repair 100 mm PVC floor trap, ISI marked with cp grating with/without waste pipe hole incl jointing to waste pipe fixed with solvent cement complete all as specified and directed by Engr-in-Charge. |
| 86 | S&F Grating doom 125 mm dia with/without waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by Engr-in-Charge. |
| 87 | S&F pressed steel frames 165 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as specified and directed by Engr-in-Charge. |
| 88 | S&F pressed steel frames 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate including one shop coat of primer complete all as specified and directed by Engr-in-Charge. |
| 89 | M&L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed by Engr-in-Charge. |
| 90 | M&L for Providing and laying in position cement concrete in Bed Block,hold fast fixing , legs fixinf etc of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) complete as per direction of Engineer-in-charge. |
| 91 | M&L for bands, straps,,supports or stay,hooks, heavy for large gates, hooks and pintal hingees, clamps,hold fast, wall tie,plates washers and similer small articals conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engr-in-charge. |
| 92 | S&F 35 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, confirming to IS-2202 (part-1-1999), ISI marked complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F 35mm thick factory made 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engr-in-Charge. Note: wire cloth shall be measured separately |
| 94 | M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 95 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed by Engr-in-Charge. |
| 96 | S&F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed by Engr-in-Charge. |
| 97 | S&F in repair 3 mm thick sheet glass ordinary/frosted quality and glazing clip/oil putty/beading in square n exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F in repair 4mm thick ordinary/frosted glass, pin head type and glazing clip/oil putty/beading in square n-exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed by Engr-in-Charge. |
| 99 | S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening as per specification & drawing complete all as specified and directed by Engr-in-Charge. |
| 100 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed by Engr-in-Charge. |
| 101 | M&L for Powder coated (of approved color) aluminium sections as in frame & shutter of Door, windows, ventilators as in sliding / openable / louvers / fixed type with and including necessary rolling for smooth moving & locking arrangement, etc. fixed to wall including, preparation of disturbed portion both sides (internal & external surfaceof wall) match with existing surface treatment and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face) complete all as specified as directed by Engr-in-charge. |
| 102 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 103 | S&F factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 4.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws,etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. (Glass shall be paid separately) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 104 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). ®Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall beacceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. |
| 105 | Providing and fixing factory made 35 mm thick single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) |
| 106 | S&F stainless steel butt hinges of size 100mm long for fixing of pvc door shutter etc complete all as specified and directed by Engr-in-Charge. |
| 107 | S&F Powder coated Aluminium, anodised, barrel tower bolts of extruded section and fixed, Length of bolt in 200mm complete all as specified and directed by Engr-in-Charge. |
| 108 | S&F Powder coated Aluminium handles, cast type, anodised Size of handle in 150mm complete all as specified and directed by Engr-in-Charge. |
| 109 | S&F Powder coated Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or castaluminium alloy and fixed Length of bolt in 250 mm complete all as specified and directed by Engr-in-Charge. |
| 110 | S&F 2 lever brass mortice lock, vertical type, size 100 mm complete all as specified and directed by Engr-in-charge. |
| 111 | S&F 5.5 mm thick sheet glass ordinary/tinted/frosted quality and glazing with neoprene rubber gasket/clip/oil putty/beading in square n.exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed by Engr-in-Charge. |
| 112 | S&F 5.5 mm thick sheet glass ordinary/tinted/frosted quality and glazing with neoprene rubber gasket/clip/oil putty/beading in square exc 0.5 sqm in each pane upto tripple story building complete all as specified and directed by Engr-in-Charge. |
| 113 | S&F in repair ACP sheet 4mm thick, for fixing in aluminium frame including necessary fittings and fixtures, complete all as specified and directed by Engr-in-Charge. |
| 114 | S&F door closer aluminium (extruded section body) hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete all as specified and directed by Engr-in-Charge. |
| 115 | S&F peg set of 4, brass chromium plated, fancy type, superior quality and fixed with screws complete all as specified and directed by Engr-in-Charge. |
| 116 | S&F in repair of stainless steel curtain rod 20 mm dia, 1mm thick with SS bracket and SS domes at end, heavy duty,complete all as specified and directed by Engr-in-Charge. |
| 117 | Supply only `Liquid Water Proofing Compound complete all as specified and directed by Engr-in-Charge. |
| 118 | S&F false ceiling with fibre cement designer tiles ivory painted (high pressure steam cured) of 4mm thickness (as per IS:14862) of size 595 x 595 mm and any one of the design (occeanic, lake & hill, cascade or electra) in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main 'T' runnerwith suitably spaceed joints to get required length, and 15x32 mm made of 0.30 mm sheet, and cross 'T' at 600 mm c/c to form a grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using GI soffit cleats fixed to exising rafter, purlin, etc with galvanised butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15 mm of all T-sections shall be centra black pre-painted with polyester paint, and havng a load bearing capacity of 12Kg/sqm, and refixed all existing electric wiring and fixture all complete at all heights as per direction of Engineer-in-Charge |
| 119 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 52,118.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
