Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Earthwork in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, levelling, ramming the foudation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over area (exceeding 30cm depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5M disposed earth to be levelled and neatly dressed - ordinary rock |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over area (exceeding 30cm depth 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth lead upto 50m and lift upto 1.5M disposed earth to be levelled and neatly dressed - Hard rock (blasting prohibited |
| 4 | Filling in foundation trenches and plinth in layers not exceeding 150mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation trenches within a lead of 50Mand lift of 1.5M all complete as per building specification and direction of E/I. (mode of measurement compacted volume) |
| 5 | Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained after cutting within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume). |
| 6 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement complacted volume). |
| 7 | Providing designation 75 A one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l. |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:3:6 (1 cement : 3 coarse sand (zone - III): 6 graded stone aggregate 20mm nominal zie) |
| 9 | Providing designation 75A brick work in C.M (1: 6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar, joints cost of screening materials raking out joints to 15mm depth , curring , taxes and royalty all complete as per builiding specification and direction of E/I. |
| 10 | Providing designation 100 A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"x4.5\\"x3\\") in C.M. (1:6) in foundation and plinth with approved uality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 11 | Providing designation 112mm thick reinforced designation 100A brick work with fly ash lime brick (FLAG) confirming to IS 12894-1990 (9\\"X4.5\\"X3\\") in C.M. (1:4) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including the cost of screening carriage of materials, scaffolding, raking out joints tom 15mm depth, curing, taxes and royalty (but excluding the cost of reinforcement) all complete as per building specification and direction of E/I. |
| 12 | Extra for providing and placing in position 2 nos. 6mm dia M.S. bars at every third course of half brick masonry. |
| 13 | Providing randam rubble stone masonry in CM (1:6) in foundation and plinth with hammer dressed stone of less than 0.03 M3 in volume and clean coarse sand of F.M. 2 to 2.5 including cost of screening raking out joints to 20 mm depth, curing taxes and royalty all complete as per building specification and direction of E/I. |
| 14 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering and shuttering, finishing and reinforcement - all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III): 3 graded stone aggregate 20mm nominal zie) |
| 15 | Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. above plinth level upto floor five level, excluding cost of centering, shuttering, finishing and reinforcement: 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III) : 3 graded stone aggregate 20mm nominal size) |
| 16 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases, above plinth level upto floor five level, excluding the cost of cenetering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone - III): 3 graded stone aggregate 20mm nominal size) |
| 17 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 20mm nominal size). |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for |
| 19 | Foundations, footings, bases of columns, etc. for mass concrete |
| 20 | Suspended floors, roofs, landings, balconies and access platform |
| 21 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 22 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 23 | Stairs, (excluding landings) except spiral-staircases |
| 24 | Weather shade, Chajjas, corbels etc., including edges |
| 25 | Providing tor steel reinforcement of 8mm. dia. rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position (excluding carriage of bars to work site) all complete as per building specification and direction of E/l. TMT FE 500 ( only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro, & Vizag (RINL) |
| 26 | Providing tor steel reinforcement of 10,12,16mm . dia. rods as per approved design and drawing with cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position (excluding carriage of bars to work site) all complete as per building specification and direction of E/l. TMT FE 500 ( only valid for Tata (Tiscon), SAIL, JSPL, Electrosteel Steels Ltd. Bokaro, & Vizag (RINL) |
| 27 | 10mm dia - |
| 28 | 12 to 25mm dia |
| 29 | Supplying, fitting and fixing 35mm thick solid core type decorative single leaf flush door shutter with both sides decorative veneered with block board core bended with high quality phenol formal dehydes synthetic resin of standard make with aluminium fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 30 | Supplying, fitting and fixing 35mm thick solid core type decorative double leaf flush door shutter with both sides decorative veneered with black board core bended with high quality phenol formal dehydes synthetic resine of standard make with Aluminium fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. |
| 31 | Providing & fixing pressed steel door frames manufactured from commercial mild steel sheet of 1.25mm thickness including hinges ,jamb, lock jamb, bead and if requiredangle threshold of mild steel angle section 50 X 25mm, orangle threshold of mild steel angle section 50 X 25mm, orbase ties of 1.25mm pressed mild steel welded or rigidlyfixed together by mechanical means, adjustable lugs withsplit end tail to each jamb including steel butt hinges split end tail to each jamb including steel butt hinges 2.5mm thick with mortar guards, lock strike-plate and 2.5mm thick with mortar guards, lock strike-plate andshock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by the Engineer Incharge - Profile - B - Fixing with adjustable lugs with split end tail to each jamb |
| 32 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both verticalssides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer in-charge. |
| 33 | 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm . 19mm for styles and 15x15mm for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45 degree angle on eigher side forming styles: and 5 mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mmshall be tapered in 45 degree on the inner side to form top and bottom raiil and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. |
| 34 | Top, bottom and lock rails shall be provided eigher side of the panel. 10mm (5mm x 2) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded / sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer's specificatio n& drawing (for W.C. and bathroom door shutter). |
| 35 | Providing and fixing 1mm thick M.S. sheet door with frame of 40X40X6mm angle iron and 3mm M.S. gusset plates at the junctions and corners all necessary fittings complete, including applying a priming coat of approved steel primer - using M.S. angles 40X40X6mm for diagonal braces |
| 36 | providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) tramsparent or dyed to required colour or shade with necessary screws etc. complete 125X75X4mm |
| 37 | Providing and fixing luminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transpoarent or dyed to required colour or shade with necessary screws etc. complete 150X10mm |
| 38 | Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or deyed to required colour or shade with nuts and screws etc. complete 250X16mm |
| 39 | Providing and fixing aluminium extruded section body tubular type universal huydraulic door closer (having brand log with ISI, IS:3564) embossed on the bodyu, door weight upto 36kg. To 80 kg. and door width from 701mm to 1000mm) with double speed adjustement with necessary accessories and screws etc. complete |
| 40 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete |
| 41 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285 fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc.. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling C.P. brass / stainless steel screws, all complete as per architetural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) |
| 42 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings wherever required inlcluding the cost of EPDM rubber/neoprene gasket required (fittings shall be paid for separately) --- Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 43 | Providing and fixing glazing in aluminium door, window, ventilator, shutters and partitions etc, with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (cost of aluminium snap beading shall be paid in basic item) With float glass panes of 4mm thickness (weight not less than 10kg/sqm.) |
| 44 | With float glass panes of 8mm thickness |
| 45 | Supplying, fitting and fixing collapsible gate of approved size and make properly fabricated with vertical double channels 20 x 10 x 2 mm at 100mm. centres and braced with M.S. flat diagonals 20 x 3mm with top and bottom rails of T.iron 40x40x6mm with 38mm dia steel pulleys complete with bolts, nuts, locking arrangements, stoppers, handles, including applying a priming coat of red lead paint, carriage , hoisting and taxes all complete as per building specification and direction of E/l. |
| 46 | Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.) |
| 47 | Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.) |
| 48 | Providing and fixing stainless steel (grade 304) railing made of Hollow tubes, channels, plates etc,. Including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessry stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasterners, stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasterners etc,.) |
| 49 | 38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete. |
| 50 | Providing and laying double charged Vitrified floor tiles in different sizes (thickness to be specificed by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622/ISO 13006 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc. complete size of tiel 600X600mm |
| 51 | Providing and laying rectified glazed ceramic floor tiles 300x300mm or more (thickness to be specified by manufacturer) of 1st quality conforming to IS:15622 with approved make in all colours,shades,except white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 Kg/sqm. including pointing the joints with white cement and matching pigments, etc.complete. |
| 52 | Providing and laying 6mm precast white glazed tiles in walls over 12mm cement mortar (1:3) and jointed with grey cement slurry flush pointed with white cement including rubbing, polishing and cost of curing, taxes and royalty all complete as per building specification and direciton of E/l. With \\"A\\" grade white 15 x 15 cm tiles. |
| 53 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. - Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent |
| 54 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by EIC Granite work |
| 55 | Providing and fixing 18mm thick gang saw cut mirror polished (premoulded & prepolished) machine cut for kitchen platform and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edge to give high gloss finish etc. complete at all levels. Granite slab |
| 56 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. --With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 57 | Chequered precast cement concrete tiles 22mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete on 20mm thick bed of cement mortar (1:4) (1 cement : 4 coarse sand) - Light shade pigment using white cement |
| 58 | Providing and laying 25mm thick kotah stone slab flooring of approved size texure and colour over 19mm thick base of lime mortar (1:1:1) (limeputty:surkhi:coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithic finish with approved quality of carborandum stone including cost of curing, taxes and royalty all complete as per building specification and direction of E/I. |
| 59 | Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 60 | Providing 6mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l. |
| 61 | Providing 12mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5with 5% cico or any other approved water proofing compoundincluding taxes and royalty all complete as per building specification and direction of E/l. |
| 62 | Providing tuck pointing in cement on stone masonary (1:3) cement on brick work with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/I. |
| 63 | Providing and fixing false ceiling at all height including of frame work made of special sections power pressd from M.S. sheets and galvanized with zinc coating of 120gms/sqm (both side inclusive) as per IS 277 and consisting of angle cleats of of size 25mm wide X 1.6mm thick with flanges of 27mm and 37mm at 1200mm centre to centre. one flange fixed to the ceiling with dash fastener 12.5mm dia X 50mm long with 6mm dia bolts other flange of cleat fixed to the angle hangers of 25X10X0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate GI channels 45X15X0.90mm running at the spacing of 1200mm centre to centre. |
| 64 | to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26mm each having lips of 10.5mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm dia X 230mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long the perimeter of ceiling gixed to wall/partition with the help of rawl plugs at 450mm centre with 25mm long dry wall screws @ 230mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 X 25mm at 230mm c/c including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, |
| 65 | finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specirfication and also including the cost of making openings for light fittings, grills, diffusers cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: |
| 66 | Fully perforated Gypsum Plaster Board/ of size 1200X2400X12.5mm having approx 15% perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60 |
| 67 | Providign and applying Plaster of Paris Putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 68 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by the rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I. |
| 69 | Providing and applying high quality acrylic modified resin based texture of Dholpur/Red sand stone pattern with anti algae and UV resistance properties to e applied as intermediate finish in desired pattern @ 43.04kg/10sqm to form film of 1-1.5mm thickness after scrapping and properly cleaning the surface to remove loose particles from the plastr surface, followed by top coating with Premium Acrylic Smooth exterior paint with silicone additives of required shade by two or more coats @ 1.43ltr/10sqm. complete as the direction of Engineer-in-charge. |
| 70 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied |
| 71 | Finishing walls with premium acrylic smooth exterior paint with sillicone additives of requited shade . New work : 2 or more coats applied @1.43 Ltr/10sqm over and including base coat of waterproofing cement paint applied @2.2 Kg/10 sqm |
| 72 | Providing primer one coat of red lead paint of approved make over new steel surface including preparing the surface after cleaning, removing dust, dirt, scales smokes and grease and cleaning the surface throughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I. (Mode of measurement area shall be multiplied by the co-efficient as indicated in building specification) |
| 73 | Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direciton of E/l. |
| 74 | Providing French spirit polishing over new wooden surface to give desired texture and gloss with approved make and shade of ready mixed French polish including cleaning the surface after removing dirt, scales smokes, grease and sand papering including cost of scaffolding and taxes all complete as per building specifcation and direction of E/I. |
| 75 | Providing 1.5mm cement punning including curring, carriage of water with all leads and lifts as per building specification and direction of E/I. |
| 76 | Water proofing for old and new roof slab - Providing and laying water proofing treatment on roof slab by applying two component, factory designed, ready to use acrylic modified flexible material applied with brush roller or spray for water proofing coating as per manufacturer specifications with gollowing steps: |
| 77 | a. Surface preparation - Providing and cleaning of concrete surface to remove dust, oil, grease including removal of existing loose paint/coating and cement laitance by cleaning with compressed air & water jet including all matrials, labour, tools, complete, ponding test to be done after plugging all outlets and to be checked from soffit to identify seepage leakage. On identification of seepage cement grouting to be done with non shrink expanding adminxture of Sika India Pvt Ltd./MYK schomberg/Dr. Fixit/Fosroc or equivalent. Providing and repairing of all corners and joints such as those between the parapet wall and the roof slab etc. sahll be chamfered with 150mm X 150mm fillet of mortar (cement, sand 1:4) admixed with acrylic polymer of Sika/Fosroc/MYK scholmberg/Dr fixit or equivalent. Before chamfering a prime coat shall be given with the slurry of acrylic polymer, Repairing surface irregularities, damaged concretein base slab dead cracks if any, with an acrylic polymer modified repair mortar including a coat of bonding agent of the same with cement slurry including all material, labour, tools complete. |
| 78 | b. 1st coat -Apply 1st coat of two component acrylic modified, ready to use flexible cementitious material on surface saturated dry roof and inside wall of parapet wall upto 600mm by brush or roller. After 1st coat of application, 45 gsm of fibre glass cloth to lay when the first layer is still green. 1st coat should be applied @ 1.50kg/sqmt/coat. Fore the prupose of measurement the entire treated surface will be measured. |
| 79 | c. 2nd coat - To apply the 2nd coat of two component acrylic modified, ready to use flexible cementitious material on right angle to the 1st coat over the glass fibre laid surface 2nd coat should be applied @ 0.7kg/sqmt/coat. For the purpose of measurement the entire treaed surface will be measured After three days of drying the 2nd coat, the rain water outlets to be plugged and ponding test to be done for 48 hours to identify seepage, leakage from soffit and if found necessary rectification to be done as per satisfaction of E/C. The water proof coating to be protected from damage before screed over it. Water proofing brand Sika Topseal 109hi/Fosroc Brushbond RFX/Dr Fioxit Pidiffin 2K/MYK Aquafin TG. Product performance- Chemical base part A Acrylic copolymer, Part B Specially graded cementitious powdere density 1.6 kg/I (mixed density) at +27 degree C. Tensile strength - 2N/mm2 after 28 days (with fibre cloth) (according to ASTM D 2370) Pullout bond strength - 2 N/mm2 (concrete failure) (According to ISO 4624) slant-shear bond strength - 4N/mm2 (according to FIP 5.15) Elongation at break - 35% without fibre cloth and 20% with fire cloth (according to ASTM D 2370) |
| 80 | d. Protection of treated surfaces with PCC ; The treated syrface shound be covered with 25mm/50mm PCC of M-20 grade (1:1.5:3) with proper slope (1:120) towards the rain outlets in alternate panels of 2 mt X 2 mtr. Keeping 6mm gap between the panel joint integral water proofing admixture conforming to IS 2645 @ of 100ml per bag of cement to be added in the screed concrete (Paid separately for this items) All corners shall be chamfered with 150mm X 150mm fillet. The rainwater outlets shall be just leveled with the screed concrete to ensure smooth discharge of water - peripherial gaps between PVC pipe outlet and concrete surface should be packed properly with rich concrete nd the peripherial mouth to be sealed with mosture insensitive epoxy putty of sika India Pvt. Ltd/MYK schomberg/Dr. Fixit/Fosroc. For purpose of measurement the entire treated surfaces will be measured e, Grooves of PCC surface should be filled with polysulphide sealant. Brand - Sika India Pvt. Ltd. /MYK Schomberg/Dr. Fixit/Foscroc warranty for five years. |
| 81 | Covering of treated surface with PCC - Providing 25mm thick Cement Concrete M-20 (1:1.5:3) maintaining slope in alternte 2 mt X 2 mt panels with approved quality of stone chips of 20mm to 6mm size graded and cleaned sand of F.M. 2.5 to 3 including screening, shuttering, and mixing cement concrete in mixer with adminxture of integral water proofing and placing in position striking curing, taxes and royalty all complete as per building specificastion and direction of E/I. Panels that has been left should be casted next day. There should be 6mm gap between panels brand - |
| 82 | Providing and filling 6mm thick groove between 25mm PCC panels with polysulphide sealant (Poring Grade) as per drawings and technical specifications and direction of E/C (with 18%GST) brand - ] |
| 83 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc,. Including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete - Hot finished welded type tubes |
| 84 | Providing and fixing at all height, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss members in slope or required pitch or curvature with Hex cap headed self drilling.tapping stainless steel screws M6, 50mm long with 3mm EPDM seal washer eetc. all inclusive of labour, scaffolding, T & P and sundries etc. complete as per directions of the Engineer-in-charge. (cost of truss/frame work shall be paid separately) - 0.56mm, Aluminium Color coated troughed profile with centre to center pitch of 200mm, depth of 32mm, overall profile width 1092mm, cover width 1000mm |
| 85 | Providing and fixing of pre-coated colour or mill finish aluminium roofing accessories in 0.71mm thickness , alloy 31500 (IS designation) aluminium alloy 3004 (ISO designation) for colour coating shall be 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns, using self drilling/tapping SS screws of sixe 6X50mm wutg 3mm thick EPDM seal and SS plain washer complete: |
| 86 | Precoated/mill finish aluminium ridges plain (500-600mm) |
| 87 | Precoated/mill finish aluminium gutter (600mm over all girth) |
| 88 | Providing & fixing on wall face unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia |
| 89 | Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 90 | Bend 87.5 degree - 110X110X110mm |
| 91 | Shoe plain -110mm |
| 92 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less thaN 440 grams. |
| 93 | Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means 50X50X50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 ( 1 cement : 4 coarse sand) and making good the wall etc. complete - 110mm |
| 94 | Providing 250 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 250 mm apron including cost of earthwork involved with 75m cement concrete (1:4:3) over one brick designation 75A, flat soling in proper grade and slope at the base , the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/I. |
| 95 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. |
| 96 | Supplying & fixing at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and dirlling holes upto 10mm dia etc, complete 40X40 X6mm angle |
| 97 | Providng and fixing concertina coil fencing with punched tape concertina coil 600mm dia 10 mtr., openable length (total length 90m) having 50 nos. rounds per 6 mtr length upto 3 mtr. Height of wall with existing angle iron Y shaped placed 2.4 M or 3.00M apart and with 9 horizontal RBT reinforced barbed wire stud tied with GI staples and GI clips to retain horizontal including necessary bolts or G.I. barbed wire tied to angle iron all completee as per direction of Engineer-in-charge with reinforced barbed tape (RBT)/spring core (2.5mm thick) wire of high tensile strength of 165kg/sq.mm with tape (0.52mm thick) and weight 43.478gm/mtr. (cost of M.S. angle CC blocks shall be paid separately) |
| 98 | Grassing with selection No. 1/ Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately). In rows 5 cm apart in both directions |
| 99 | Cost of Grass |
| 100 | Carriage of materails |
| 101 | Bricks - Lead - 10km. |
| 102 | Sand - Lead 15km |
| 103 | Chips - Lead 15km |
| 104 | Metal - Lead 15km. |
| 105 | Earth - Lead - 2km |
| 106 | Supplying, fitting and fixing C.I. cover with frame for manhole &ninspection chamber 600X450mm (wt. not less than 25kg) all cost complete as per direction of E/I |
| 107 | Making soak pit 2.5M diameter 3 mtr. deep with 45X45cm dry brick honey comb shaft with brciks of class designation 75 and S.W. drain pipe 100mm diamter 1.8 mtr. long complete as per standard design with FPS bricks |
| 108 | Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25 of size 1000X450X50mm reinforced with 8mm dia four nos longitudinal & 9 nos. cross sectional TMT hoop bars, including providing 50mm dia perforations @ 100 to 125mm c/c. including providing edge binding with M.S. flats of size 50mm X 1.6mm complete all as per direction of E/I. |
| 109 | Supplying, filling, spreading & levelling stone boulders of size range 5cm to 20c, in recharge pit in the required thickness for all leads & lifts all complete as per direction of Engineer-incharge |
| 110 | Supplying, filling spreading & levelling gravels of size range 5mm to 10mm in the recharge pit over the existing layer of boulders in required thickness for all leads and lifts all complete as per direction of E/i. |
| 111 | Supply, assembling, lowering and fixing in vertical position in borewell/recharge pit unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS : 12818 including required hire and labour charges, fittings & accessories etc. all complete for all depths as per direction of Engineer-in-charge 150mm nominal size dia |
| 112 | Costs of drilling 200mmX165mmX125mtr. Deep borewell in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials, tools, drilling rig, Air compressor and equipments, as well as fuel lubricants and cost of transportation of rig machine and other vehicles upto the site From 0-50 mtr. |
| 113 | Providing and fixing ball plug/bottom plug of required dia to the bottom of pipe assembly of tubewell/recharge pit as per IS:2800(part 1) 150mm dia |
| 114 | Supplying, fitting and fixing 125mm dia UPVC pipe of approved quality and make - basic rate + 10% for C.P. and laying charge |
| 115 | PLUMBING WORK |
| 116 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of make with 100mm HCI p trap 15 litres CI pull and let go flushing cistern of names or other ISS equivalent make complete with all fittings CI or C C bracket 32mm alkethene / PVC telescopic flush pipe about 2m long with one brass coupling and clamps GI chain and pull including supplying and fixing a pair of vitreous white glazed earthenware footrest to be fixed in floor 15mm CI body brass spindle stop cock of weight not less than 50 grames 15mm PVC connection pipe 450mm long and coat of red oxide primer etc all complete as per specification and direction of E/I. (A) 580 mm long with 12.5 litre low level PVC cistern |
| 117 | Supplying, fitting and fixing 40 mm high viterous white glazed earthen ware E.W.C. with \\"p\\" trap of including supplying & fixing 15 litres C.I. mosquito proof low down flushing cistern of approved make with complete fittings with C.I. handle and R.S. or bracket with telescopic flush pipe with brass coupling and plumbers joints spindle stop cock of approved quality weight not less than 450 grms. , 15 mm P.V.C. alkathene pipe 45 cm long with brass coupling at both ends and white/ black plastic solid state seal and lead of commander/ cuckoo or other I.S.S. make with hinges or screw etc. painting pipe and cistern etc. with 2 coats of approved paint over a coat of red oxide primer etc. all complete as per specification and direction of E/l. (A) With \\"P\\" trap (b)12.5 lit. low level P.V.C. cistern |
| 118 | Providing and fixing 8mm dia C.P./S.S. jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer-in-charge |
| 119 | Supplying, fitting and fixing flat back or angular lipped front vitreous white glazed earthern ware urinal of with 5 ltrs. Capacity C.I. automatic fushing cistern of reliance for any other ISS approved make with all fittings with C.I. or RS brackets standard size G.I. flush pipe with fitting clamps 15mm C.I. body brass spindle stop cock of approved quality weight not less than 400 gms. 15mm PVC alkethene pipe 450mm long with brass coupling at both ends and doing plumber points including painting of exposed part with two coats of approved paint over a priming coat of red oxide cutting wall and floor making good the same etc. all complete as per speciifcification and direction of E/I. Flat back or standing corner (600X350mm) |
| 120 | Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth - Granite Stone of approved shade |
| 121 | supplying fitting and fixing vitreous white glazed earthen ware wash hand basin supported on painted C.I OR R.S bracket 32mm C.I brass waste 15mm dia C.I body brass spindle stop cock of approved quality of weight not less than 350 grames, 32mm PVC wate pipe 750mm long with brass coupling with one end and making plumber joints etc.all complete as per specification and direction of E/I. |
| 122 | Supplying, fitting and fixing gun metal full way valve of approved quality all complete as per specifcation and direction of E/I. |
| 123 | 20mm dia. |
| 124 | 25mm dia. |
| 125 | 32mm dia |
| 126 | 40mm dia |
| 127 | Providing and fixing brass stop cock of approved quality all complete as per specification and direction of E/I. … 15mm dia. |
| 128 | Cutting drain width wise above GL for laying PVC pipe and restoring brick work in cement mortar (1:4) 12mm cement plaster in C.M. (1:4) with neat cement punning as per specifciation and direction of E/I. (PVC 110mm dia) |
| 129 | Making holes in wall for laying PVC pipes and restoring the same all cost complete (PVC pipe 110mm dia) |
| 130 | Supplying all tolls and labour and cutting chajja cornice for laying PVC pipes and making good the same as per specification and direction of E/I. (110mm dia PVC pipe) |
| 131 | Supplying, fitting and fixing bathroom fittings of approved make and as per IS specification all cost complete as per direction of E/I. (all rates have been adopted from the basic rate from SOR + 30% for labour and Contractors profit) |
| 132 | Pillar cock (long neck) |
| 133 | Bib cock - long thread |
| 134 | Angular stop cock L.T. |
| 135 | 4 way diverter for concealed fittings |
| 136 | Glass shelf |
| 137 | Flush valve complete with 32mm size control cock & flange |
| 138 | 32mm dia. PVC waste pipe 750mm long with coupling |
| 139 | 15mm C.P. nipple with coupling |
| 140 | Steel jali - 100mm dia. |
| 141 | Providing Solvent cement |
| 142 | Supplying, fitting and fixing Mirrors of 6mm thick plate glass bevelled edge mirror including C.P. brass revolving fittings 3mm ply wood board and C.P. hinges to fix with mirror. 600 X 450mm |
| 143 | Supplying, fitting and fixing C.P. brass towel rail 20mm X 600mm with bracket container |
| 144 | Supplying, fitting and fixing C.P. brass soap dish container medium quality with screw and hinges etc. |
| 145 | Providing and fixing Pressure adjustable shower with revolving joint |
| 146 | Providing and fixing 15mm dia and 45cm long PVC connection pipe with heavy quality brass coupling at both ends etc all complete as per specification and direction of engineer in charge |
| 147 | Supplying, materials and labour for constructing inspection chamber of designation class 75B bricks size 750mm deep, 600X450mm internal dimension having 250mm wall thickness in cement mortar (1:6) including 12mm cement plaster (1:4) with punning on inside and cement plaster (1:6) with 600X475mm G.I. cover with frame (weight not less than 35kg) alongwith earth work in excavation and 80mm thick PCC (1:3:6) in foundation and refilling all complete as per specification and direction of E/I. |
| 148 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS 8931, 15mm dia nominal bore of approved brand C.P. fittings |
| 149 | Providing and fixing PTMT extension nipple 15mm size with 12\\" BSP thread 70mm length and 30mm breadth and weighing not less than 18gms of approved make |
| 150 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i.e fixing the pipe with clamps at 1Mtr. Spacing. This includes jointing of the pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I. Concealed work including cutting chases and making good the walls etc. |
| 151 | 20mm nominal bore |
| 152 | 25mm nominal bore |
| 153 | 32mm nominal bore |
| 154 | External work - 40mm nominal bore |
| 155 | Providing & fixing on wall face unplasticised - Rigid P.V.C. pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion . Single socketed pipes. 110 mm dia |
| 156 | Providing and fixing on wall face unplaqsticised- PVC moulded fitting/ accessories for unplaqsticised- PVC rain water pipes confirming to IS: 13592 TYPE A,including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 157 | Single Tee with door 110x110x110 ,mm |
| 158 | Bend 87.5 degree 110 mm bend |
| 159 | Single pushfit coupler |
| 160 | Providing and placing on terrace (at all floor levels) (PVC) Polyethylene water storage tank ISI 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 161 | Supplying and fixing PVC fittings of approved make confirming to IS : 1729 including supplying nails and bobbins, fixing solutions including earth work or masonary work cutting and remaking and providilding as the case may be all complete as per specification and direction of E/I. |
| 162 | PVC cowl - 100mm dia. |
| 163 | Floor trap - 100mm dia. |
| 164 | Providing and fixing G.I pipes complete with G.I fittings including trencheing and refilling etc. 80mm dia nominal bore |
| 165 | ELECTRCIAL WORK |
| 166 | Point Wiring in PVC Conduit, with Modular type Switch: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with modular type switch, modular plate, suitable size of GI box etc as required. |
| 167 | Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin, 5/6 amps modular socket outlet and 5/6 amps modular type switch, connection, painting etc as required. |
| 168 | Supply and Fixing Light Plug Point with Modular Type Accessories: Supply and Fixing GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin, 15/16 amps modular socket outlet and 15/16 amps modular type switch, connection, painting etc as required. |
| 169 | Supply & fixing 20A SPN MCB Industrial Socket Outlet: Supply and fixing of 20A, 240V, SPN insustrial type socket outlet with 2 poles and earth, metal enclosed plug top along with 20 amps 'C' series, SP MCCB, in sheet steel enclosure, on surface or in recess with chained metal cover for socket out let and complete with connections, testing and commissioning etc as required. |
| 170 | Circuit / Sub-main wiring in PVC Conduit: Wiring for circuit / sub-main wiring along with earth wire with the following sizes of PVC insulated, copper conductor, single core cable in surface/recessed PVC conduit as required. |
| 171 | 2x1.5 Sqmm + 1x1.5 sqmm earth wire |
| 172 | 2x2.5 Sqmm + 1x2.5 sq mm earth wire |
| 173 | 2x4 Sqmm + 1x4 sq mm earth wire |
| 174 | 4x6 Sqmm + 2x6 sq mm earth wire |
| 175 | S/F VERTICAL TYPE TP MCB DB:- Supplying and fixing of following ways surface/recess mounting, vertical type 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCBs and incommer) as required. 4 Ways (8+12) double door vertical type |
| 176 | S/F 'C' series MCB:- Supplying and fixing 240 volts, 'C' series, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc, as required. |
| 177 | 6/32A Single Pole |
| 178 | 6/32A TPN MCB |
| 179 | 50/63A TPN MCB |
| 180 | S/F Ceiling Rose: Supplying and fixing 2 pin ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 181 | S/F Modular type electronic fan regulator: Supplying and fixing stepped type fan regulator on the existing modular plate switch box including connections but excluding modular plate etc as required. |
| 182 | ITC Exhaust Fan upto 450 mm sweep: installation of exhaust fan upto 450 mm sweep in the existing opening, including making the hole to cut the size of the above fan, making good the damage, including connection, testing, commissioning etc as required. |
| 183 | S/F Batten / Angle Holder: Supplying and fixing batten / angle holder including connection etc as required. |
| 184 | S.I.T.C of following rating surface mounted LED tube light fittings suitable for 230V, 50Hz, single phase supply etc. complete as required - 20/22W. LED tube light |
| 185 | Bulk head fitting with 9/10Watt CFL/LED |
| 186 | Supplying, 15/16 Watt LED bulb of approved make |
| 187 | Supply, installation, testing and commissioning of following size ceiling fan 3 blades confirming to IS:374:2019 including wiring the down rods of standard length (upto 30cm) with 1.5sq.mm. FR. PVC insulated copper wire suitable for 230V, 50Hz, single phase supply etc. complete as required. - 1400mm (56\\") BLDC star rating 32W ceiling fan |
| 188 | S.I.T.C. of following rating recess/surface mounted LED round/square shape down light luminaire with pressure die cast housing for single phase supply Voltage. Luminaire shall be confirm to IS:10322 Part -5/section 2 of IEC:62722 with all necessary accessories as required - 15/16W LED round down light - as CL |
| 189 | S.I.T.C. of following rating recess/surface mounted LED round/square shape down light luminaire with pressure die cast housing for single phase supply Voltage. Luminaire shall be confirm to IS:10322 Part -5/section 2 of IEC:62722 with all necessary accessories as required - 18/20W LED round down light |
| 190 | 2'X2' LED panel light |
| 191 | Supplying Exhaust fan of 12\\" (300mm) of aproved make |
| 192 | Supplying fitting and fixing 450mm (18\\") metal body wall fan with spped regulator suitable for single phase 220V, 50Hz Ac supply |
| 193 | S.I.T.C. of following rating LED street lighting luminarie die cast housing and toughened glass cover (IP-66 portion) in existing pole/pipe for supply voltage 100-270V. AC, 50Hz. Luminaire shall be confirm to IS:10322 part - 5/section 3 and shall be complete with all necessary accessories as required - 60W LED street light |
| 194 | GI Earth Pipe Electrode: Earthing with G.I. earth pipe 4.5 mtr long , 40mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcol and salt complete as required. |
| 195 | Supplying and nlaying 25mm X 5mm G.I. strips at 0.50 metre below ground as strip earth electrode, including connection/terminating with G.I. nut, bolt, spring, washer etc. as required (jointing shall be done by overlapping and with 2sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 196 | Providing and fixing 25mm x 5mm G.I. strip on surface or in recess for connection etc. as required |
| 197 | Provioding and laying 1.1 KV grade aluminium armoured cable as per IS 1554 (Part I) heavy duty all cost complete including cost of brass compression gland, cable jointing and end termination as per specification and direction f E/I. |
| 198 | 3.5 core, 95 sq.mm |
| 199 | 3.5 core, 25 sq.mm |
| 200 | Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of size not exceeding 35sqmm but not exceeding 95sq.mm. direct in ground including excation, and refilling the trench etc. as required but excluding sand cushioning and protective covering. |
| 201 | Supplying and making end termination with brass compression gland and aluminium lugs for following of of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1KV grade as required 3.5 X 50 sq.mm (35mm) |
| 202 | LT. PANEL: Supply, designing, manufacturing, installation, testing and commissioning of Panel fabricated out of 2mm thick (14SWG) CRCA sheet steel duct and verim proof with reinforcement of suitable size iron channel of suitable size with proper lifting arrnagement effecting proper connection of all incomer and out going (IP-43) fully comparatmentalized cubical type wall mounted, totaly enclosed, switch board and suitable for use on 415V, 3 phase, AC supply, 4 wire 50 C/s, system having 25KA fault capacity, housed with incoming and outgoing aluminium bus bars, interconnection, interlocking between feeders etc. wtih indicating lamps push buttons, necessary accessoires, all out going feeders protection as required. |
| 203 | Incomer : 1 no. 315,415V, 4P/36KA, MCCB with thermo-magnetic based released type with oil S/C protection with adjustable current with spreader links and extended rotary handle., indicator, Digital Ammeter, three phase, Digital Volt-meter - three phase, CT 300/5VA-5 class one epoxy resin cast CT (3 nis,) 1 set - make Kappa/Matrix, Phase indicating light shall be protected by 2 amps SP MCB's for incomer |
| 204 | Outgoings. - 2 nos., 100A FP/16KA, MCCB with thermomagnetic release type and shall be with spreader links and front rotary handles, 63A TPN/10KA MCB - C series |
| 205 | Detailed accessories of L.T. panel |
| 206 | 63Amp DP MCB - 5 nos. 40A TPN/10KA MCB C series 5 nos. AL bus bar of continious rating 400A 4 Pole MCCB 315A, 35KA with fixed thermal setting - 1 no., MCCB 100 amps , 16KA fixed thermal setting - 2 nos. 40 Amp DP MCB - 5 nos., 40 Amp TPN MCB - 4 nos. 63 Amp DP MCB - 5 nos. HRC Fuse - 100Amps TP & N for control supply - 3nos. 400Amps 415V heay duty three phase with neutral bus bar chamber - 1no. |
| 207 | S/F wall/floor mounted cubical panel board fabricated with 16 guage iron sheet suitable for panel mounted switch disconnector including busbar chamber, insulator and painting etc. as required (but without busbar copper chamber) - 40 M2 |
| 208 | Electronic timer on delay/off delay for 0 to 30 sec. - 1no. Auxilary contactor (1no.+1NC)32A, IS/IEC60947-4-1 - 1no., LED indicator lamp RYGB - 4 nos. 3 way 4 pole selector switch - 4 nos., Digital Voltmeter (0-500Volt) 3 phase class 0.5 - 1no. Digital Amp mtr (0 - 500Amp) 3 phase class 0.5 - 1no., CT coil of CT ratio 300/5 IS: 2705 part 3 - 6 nos. CT coil of CT ratio 800/5 IS: 2705 part 3 - 3 nos. 50mm X 5mm copper tape (2.30 kg/mtr.) - 4 nos. 20mm X mmm copper tape (0.533 kg/mtr) - 3 kg., |
| 209 | 6 sq.mm ISI marked FRLS PVC insulated single core copper conductor cable - 35 mtr., |
| 210 | 2.50 sq.mm ISI marked FRLS PVC insulated single core copper conductor cable - 70 mtr. |
| 211 | 1.50 sq.mm ISI marked FRLS PVC insulated single core copper conductor cable - 40 mtr. |
| 212 | All complete as per specification and direction of E/I. |
| 213 | For 16 mtr. High mast : ITC of the high mast and light fixture with the help of suitable tools and plants, wiring of luminaries with all wiring metril like PVC insulated PVC sheathed flexible cable of suitable coper conductor lughs, MCB and all labour & construction of shallow foundation with M25 grade concerete for the high mast considering safe soil bearing capacity of 10T/mtrs.sq. for 16M high mast. |
| 214 | S.I.T.C. of following rating LED street lighting luminarie die cast housing and toughened glass cover (IP-66 portion) in existing pole/pipe for supply voltage 100-270V. AC, 50Hz. Luminaire shall be confirm to IS:10322 part - 5/section 3 and shall be complete with all necessary accessories as required - 90/100W LED street light |
| 215 | BOREWELL |
| 216 | Costs of drilling 200mmX165mmX125mtr. Deep borewell in all kinds of soil and rock in rural area for installation of pump set with Hydraulic DTH rig machine, all complete including supplying all materials, tools, drilling rig, Air compressor and equipments, as well as fuel lubricants and cost of transportation of rig machine and other vehicles upto the site |
| 217 | From 0-50 mtr. |
| 218 | Above 51 mtr.to 125 mtr |
| 219 | Above 125 mtr. |
| 220 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia conforming to IS : 12818, including required hire and labour charges fittings & accessories etc. all complete for all depths, as per direction of Engineer-in-charge - 200mm nominal size dia |
| 221 | Gravel packing in tube well construction in accordance with IS : 4097, including providing gravel fine/medium/coarse, in required grading & size as per actual requirement, all complete as per direction of Engineer-in-charge |
| 222 | Development of tube well in accordance with IS 2800 (part 1) and IS: 11189 to establish maximum rate of usable water yield without sand content (beyond permissible limit) with required capacity air compressor, running the compressor for required tile till well is fully developed, measuring yield of well by \\"V\\" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, colleting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete including hire & labour charges of air compressor, tools & accessoires etc. all as per requirement and direction of Engineer-in-charge. |
| 223 | Providing & fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for borewell of 200mm dia |
| 224 | Providing and fixing M.S. clamp of required dia to the top of casing/housing pipe of tubewell as per IS:2800 (Part-1) including necessary bolts & nuts of required size complete |
| 225 | Providing and fixing ball plug/bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS :2800 (Part-1) 200mm dia |
| 226 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pioes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement trenching, refilling & testing of joints complete as per direction of Engineer in charge 50mm nominal outer dia pipes |
| 227 | Supplying submersible pumps sets confirming to IS:8034 and motor confirming to IS:9283 pump shall be suitable for various delivery head and discharge with stainless steel pump shaft and polypropylene/noryl impeller, motor suitable for working on 415V+10%, 3PH. 50HZ, AC supply with cable guard, thurst carbon/fiber bearing to withstand entire hydraulic thrust, water proof winding shall be provided. the pump set shal be suitable for direct couplings, pump shall have suitable outlet as per manufacture design. Anti thrust stream lined non return valve shall be provided with pump. 3 mtr. submrsible copper conductor cable in single/double run shall be provided with each pump. |
| 228 | Submersible pump set 100mm dia (with polypropylene/noryl impeller) upto 20 stage - 3.0 HP |
| 229 | Supplying and stacking of good earth at site including royalty and carriage upto 1km (earth measured in stacks will be reduced by 20% for payment) |
| 230 | Supplying and stacking sludge at site including royalty and carriage upto 1km (sludge measured in stacks will be reduced by 8% for payment) |
| 231 | Supplying and stacking at site dump manure from approved source including carriage upto 1 km (manure measured in stacks will be reduced by 8% for payment) Screened through sieve of IS designation 20mm |
| 232 | Rough dressing the trenched ground including breaking clods |
| 233 | Fine dressing of the ground |
| 234 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of Officer-in-charge )cost of sludge, dump manure and/or good earth to be paid separately) |
| 235 | Mixing earth and sludge or manure in the required proportion specified or directed by the officer-in-charge |
| 236 | TOTAL SCHEDULED ITEMS |
| 237 | PAT B - NON SCHEDULED ITEMS |
| 238 | Suplying, installaing and commissioning of small size water fountain as approved by the authorities, with solar operated motor of required HP and water proof light fittings of approved brand (all the items will be got approved from the Client and Engineer incharnge before installation) all cost complete including required electrification work etc. all complete as per direction of E/I. |
| 239 | Supply/erection/commissioning/construction of Statue of Birsa Munda 6'-4\\" with required artificial work etc. all complete |
| 240 | Supply, installation and commissioning of Water fountain with the following specifications. |
| 241 | . Diameter of Ring – A (Outer): 10 ft Make: G.I, Dia: 40 mm 1 no., II. Crown Nozzles: MAKE: SANSAR, BODY : BRASS HEIGHT: 50mm, TOP 4-5MM, BASE: 10 MM - 55 nos, III. CENTER FOAM SHOOTER: • Make: Sansar, Body: Brass, Height: 160 mm, Top: 60 mm • Base: 40 mm - 1no., IV. SUBMERSIBLE MOTOR: 5 H.P MOTORS MAKE: CROMPTON/KIRLOSKAR V. SUBMERSIBLE LIGHTS: (12W) LED WITH RGB- COLOR OPTIONS . MAKE: SANSAR, COLOR OPTIONS: RGB - 12 nos. VI. RGB - 1 no., CONTROLLER - 1 no., VII. PROVIDING NECESSARY PLUMBING WORK SUCH AS G.I. PIPING,G.I. FITTING, VALVES I.E COMPLETE IN ALL RESPECT- VIII. ELECTRICAL PANEL WITH MCB, AMMETER, VOLTMETER, SINGLE PHASING PREVENTER INDICATING LIGHT, STARTER ETC. IX. ELECTRICAL WORK SUCH AS CABLING, CONDUCTING ETC. X. TESTING AND COMMISSIONING XI. DESIGNING OF CONCEPT XII. LAYOUT PLAN AND CIVIL WORKS OF FOUNTAINS OF 15 FT OUTER DIAMETER, WITH INSIDE DEPTH 1.5’ , SUMP FOR PUMPS, CERAMIC TILES, STANDARD QUALITY IN INNER WALLS AND OUTER WALLS OF FOUNTAINS |
| 242 | S/F/F all height wall paneling/paartition of 19 mm thick water proof ply (centure panic Pine wood, ISI Mark,Termites) over 2\\"x1\\" aluminium section, 4 mm thick water proof veneer (green decor wood) finishing with malamine polished all complete including beading, all taxes and royalty all complete as per building specification and direction E/I |
| 243 | Providing and fixing high quality Vertical blinds of Vista or equivalent of approved colour and make with necessary fittings all cost complete, as per direction of E/I. |
| 244 | Auditorium Chair, Push back, PU foam, PU Arm, Fire Retardant Fabric Tapestry, 550(L)X770(D)X1060(H), individual Arm (make Geeken or equivalent) |
| 245 | Three Seater Sofa, Wooden Frame, SS pipe Leg, size in mm 2120(L) X 935(D)X850(H), Leatherettee, all cost complete (Make Geeken or equivalent) |
| 246 | Visitor chair/Stage chair, Chrome Cushion arm, Chrome plated pipe stand Leatherette, all cost complete |
| 247 | Centre table, SS pipe frame Chrome Finish, PLPB edge vabded top 18mm thick Marino 10858 Colour, 1200X600 all complete |
| 248 | Air conditioning work |
| 249 | Supply of full inverter VRF system( 5th Generation) full inverter VRF with modular type outdoor units all scroll DC inverterter compressors for cooling application along with different typs of indoor units, compatible ODU's. All the inverter type scroll units shall be with corrossion resistant black fin on condenser Al fins so as to shield it from sand salt and other elements carried by air along with hydraulic coating for longer life. COP at AHRI condition of ODU at 100% load should not be less than 3.7 ( COP declaration at AHRI condition to be submitted along with tender). Manufacturer of VRF unit should be OEM of its compressor also. Outdoor Unit should be disign to work up tp 50 *C AmbiENT Temp withour tripping. |
| 250 | The VRF unit shall be compatible with 410a or similar eco friendly refrigerant. The ODU should have a sub coil feature to use coil surface more efficiently through proper circuit / bridge. so that it prevents flushing of refrigerant from long pipe due to this effect , thereby achieving energy saving. ODU should not be derated for ambiient temperature up to 39 Deg C. Vendor to submit cooling capacity of ODU at 35 Deg C and 39 Deg C. Even in the event of failure of a few IDU's other IDU's connected on the same ODU shall continue to work continuously. Copper tube of condenser shall be inner highly grooved typeswith fins coated with a factory applied corrossion resistant material and additional hydaraulic coating. Top Discharge Outdoor 20 HP |
| 251 | Suupply installation testing and commissioning of following capacity and external stati cpressureVRF/VRVceiling mountedductabletype indoorunit equipped with washable type filter, fan section with low noise fan / dynamicallybalancedblowermultispeedmotorsectionwithDXcoil ,electronic expansionvalve , cordedremotecontrol, outer cabinet , vibration isolators, drainpanandothernecessarysupportsetc. suitable foroperationonsingle phase 230 V +/- 10%, 50 Hz Ac supply complete as required |
| 252 | Indoor Ductable Unit with BLDC Motor 8.0 TR |
| 253 | Connector - Supply of VRF Y-joint Out door |
| 254 | Controller Indivisuale Supply of Hand wired Remote |
| 255 | Charges for Lifting, Shifting , installation , testing and commissioning of the bove VRF system |
| 256 | Top Discharge Outdoor 20 HP |
| 257 | Charges for Lifting, Shifting , installation , testing and commissioning of Ductable Indoor Units- 8.0TR |
| 258 | Supply Instaation Testing and commissioning including vacumization and Nitrogen testing of following nominal size of soft/ hard drawn copper refrigerant piping for VRF /VRVsystem complete with fitting swith suitable adjustable ringtypehanger supports, jointing/brazing includingaccessories insulatedwith XLPE Class O tubular-insulation/ with class O closed cell elastomatic nitrile rubber tubular sleeves sections of specified thickness as given below fo rsuction andliquidlines,all accessories as per specification setc as required |
| 259 | 28.58mmOD ( Hard drawn)With tube thickness 1.2mm, 19mmthick insulation |
| 260 | 15.86mmOD ( Soft drawn)With tube thickness 1.2mm, 19mmthick. Insulation) |
| 261 | Tray Work for Copper Piping Supplying and installing following size of Hot Dipped Galvanized perforated GI cable trays including bends. tee, reducers etc with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended fromthe ceiling with GI suspenders including bolts & nuts, suspenders etc as required. 250 mm wide x 40 mm depth x 1.6 mm thickness |
| 262 | Drain work- Supply laying/ fixing testing of following nominal sizes of PVC Drain water piping duly insulated with following closed cell nitrile rubber of minimum 19kg/ cu m density.- 25 mm dia |
| 263 | DUCTING & GRILLS |
| 264 | Supply, Fabricated, installation, balancing and commissioning of GI Duct |
| 265 | Supply, Installation of Grilles and VCD |
| 266 | Duct Accoustic - Supply and fixing of acoustic lining or Nitrile rubber of supplyair duct and plenum with 25mm thick having density of 32kg/m³,with 25mm X 25mmGI section of 1.25mm thick,at 600mm centre to centre covered with Reinforced Plastic tissue paper and 0.5mm thick perforated aluminum sheet fixed to inside surfaceof ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications |
| 267 | Additonal Refregerent 410a |
| 268 | Transmission & Control Wiring For VRV System- Providing & fixing of control cumtrans-mission wiring of copper between indoor and out door unit in 25 mm PVC Conduit.- 3C / 2C x 1.0 Sq mm |
| 269 | Supply and installation of Sound system and Digital podium |
| 270 | SITC Of 300-watt, 8-ohm small-format speaker for zone-fill coverage and high-SPL foreground music 2 LFS high excursion 8-inch woofers support the lowest vocal range down to 70Hz EMB2S extended HF compression driver is also used in Bose’s ArenaMatch arrays 90° x 60° constant-directivity high-frequency horn yields wide, even coverage in either horizontal or vertical orientations Power Configuration: 2-way LF Driver Size: 2 x 8\\" LF8 woofer HF Driver Size: Bose EMB2S titanium-diaphragm, neodymium compression driver Power Rating: 300W Continuous, 1200W Peak Impedance: 8 ohms Frequency Range: 70Hz-18kHz (-10 dB) Crossover Frequency: 200Hz, 1.2kHz Maximum Peak SPL: 126dB SPL Height: 9.3\\" Width: 27\\" Depth: 11\\" |
| 271 | SITC Of Power ShareX PSX4804D is a four-channel, 4800-watt smart amplifier designed for use with Bose Professional installed sound systems. Onboard DSP gives you instant access to optimized loudspeaker presets via Control Space Designer software with easy ecosystem integration across Bose Professional processors, loudspeakers, and controllers. Design, configuration, installation, and operation become simpler — so you can get the job done and move on to the next.Total Power Output 4800 W (Rated total @ 4-8Ω, 70V, 100V), Amplifier Class Class D Frequency Response 20 Hz – 20 kHz (±1.0 dB @ 1 W, 8 Ω) Connectivity Dante (RJ-45), Analog balanced inputs (Euroblock),Dimensions (H x W x D) (1.8 in x 19.0 in x 14.1 in) |
| 272 | SITC Of A powered, portable bass module, the Sub2 subwoofer combines with virtually any portable PA and delivers low end performance down to 37 Hz. Its unique 10” × 18” high-excursion neodymium RaceTrack driver allows for an ultra slim enclosure, delivering performance that rivals traditional round drivers without the cumbersome size, freeing up room in your vehicle and on the stage.Wattage- 1000 W,Product Dimensions (H × W × D) (27.3 × 12.5 × 21.7 in) |
| 273 | SITC Of OFC Speaker Wire |
| 274 | SITC Of 20 Channel mixer |
| 275 | Connector & Other Accessories |
| 276 | Volume controller |
| 277 | SITC Of 4K UHD Short Throw Home Cinema Laser Projector Color Black Brightness 2600 Lumens Resolution 4K UHD (3840 x 2160)Light Source Laser Contrast Ratio 3,000,000:1 Throw Ratio Short Throw HDR Support HDR10 / HLG Input Connections 2 x HDMI 2.0b, 1 x USB-A, Audio Out, RS232, LAN Built-in Speaker Yes Keystone Correction Yes (Vertical & Horizontal) Dimensions (H x W x D) 166.5 x 416 x 351 mm (Benq or equivalent) |
| 278 | SITC OF SCREEN, PROJECTION; TYPE: DISPLAY; OPERATED: MOTORISED, MOUNTING METHOD: WALL, MATERIAL: HD MATT WHITE FIBER, COLOR: WHITE, PROTECTION FOR WHICH DESIGNED: PROJECTOR, FOLDABILITY: INFLATEBLE, VIEWING AREA-: 90\\"X160\\"; ASPECT RATION 16:9, RESOLUTION: 1080 P,DIGONAL 185\\" |
| 279 | SITC OF Wireless Handheld Microphone SVX Diversity Receiver. Handheld Microphone Transmitter with Microphone. Frequency Response 60 Hz - 15 KHz. Customized frequency response is smooth and extended. It is specifically tuned for audio use. Cardioid detection pattern rejects off-axis sounds and provides good front feedback. The dynamic cartridge has a simple, solid coil so it can handle high sound levels without any distraction. The steel tennis ball has a \\"pop\\" filter grille to reduce breathing noise and wind noise. |
| 280 | SITC of Low Noise Motorized projector ceiling lift |
| 281 | SITC OF digital Podium Body and Top : Metallic All doors Lockable : Yes Top Sliding Mechanism : Yes Provision for Monitor : Yes Electronic Monitor Lift : Yes Document Camera Tray : Yes (Sliding Type) Door access : Front/Rear Chassis : Polymer coated CRCA steel sheet Thickness of enclosure : 1.6mm Screen Size : 21.5” Diagonal Resolution : 1920 x 1080 PC Connection : USB Port Brightness : 250 cd/m2 Input : DVI, HDMI Touch : Finger and Stylus with capacitive Touch Stylus Type : Battery Free Pen Display Colors : 16.7M Response Time : 5ms Contrast Ratio : 1000/1 Cartridge : 20mm Condenser Frequency Response : 40~20000 Hz. Polar Pattern and Microphone Type : Cardioids, Polarized Condenser Connectors : 3-Pin XLR with 48V Phantom Power and 200 Ohms impedance. |
| 282 | Stage treatment and lighting |
| 283 | CE Certified 54 x 3W LED RGBW PAR Light with RDM protocol and die cast aluminium body duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 3V DC SMD LED ARRAY • Base color : RGBW • LED Configuration : 12Red, 18Green, 18Blue, 6White Optical System • Light Beam Angle : 15° or 25° • Panel lens: PMMA LENS ARRAY combined with a special optical design produces uniform and pleasant lighting even when used with a mixture of different LEDs • Power Supply Unit, Input: AC 100 - 260V 50/60Hz Output: 24V DC, electronic flicker-free power supply. • Lighting Fixture must be provided with Minimum 3 Mtr Length (2.5 Mtr Length Power In Cable + 0.5 Mtr Power out Cable) 3 core 1.0Sq mm FRLS & ISI mark cable with 3pin IEC Male Plug Mandatory. • Lighting fixture must be properly earthed and earthling cable should be connected with power supply chord. Control System • Control Protocol : RDM & Manual • Mandatory Accessories supplied along with Lighting Fixtures 1) Spud 28 mm Spigot with M12 thread •Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning |
| 284 | SITC of CE Certified 100W LED Spun Aluminium PARCAN Light 3200K with RDM protocol and duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 36V DC COB LED Max Power Consumption upto 100W • Correlated color temperature (CCT) : 3200K ± 200K • Color Rendering Index (CRI): > 95 • Television Lighting Consistency Index (TLCI): > 95 • R9 Value: > 95 • Lamp life hour : L70 >50000 Hours @ 55°C • LM 80 Certificate of LED Chip along with lighting fixture must be submitted by the OEM to ensure the light source compatibility with required specification as mentioned above. Optical System • Light Beam Angle : Min 10° to 30° or more manually adjustable zooming • Lens: Lense Dia 150mm ± 5% . • Lens Material: Poly methyl methacrylate without bubbles and crack to provide pleasant light output.. Electrical System • Power Supply Unit, Input : AC 100 - 260V 50/60Hz Output : 36V DC power supply. • Power Consumption : 100W ± 15% • Dimming : 0 to 100% 8 Bit Linear Dimming • Lighting Fixture must be provided with Minimum 3 Mtr Length (2.5 Mtr Length Power In Cable + 0.5 Mtr Power out Cable) 3 core 1.0Sq mm FRLS & ISI mark cable with 3pin IEC Male Plug Mandatory. • RDM ID Information: RDM ID Can able to show minimum following Information like * • Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning • Focus type : Smooth focus adjustment from rear with thermoplastic Knob • Focusing Mechanism : Manual Focusing mechanism forsmooth zooming. |
| 285 | 200W LED Fresnel spot Light 3200K with RDM protocol and Extruded aluminium body duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 54V DC COB LED Max Power Consumption upto 200W • Correlated color temperature (CCT) : 3200K ± 200K • Color Rendering Index (CRI): > 95 • Television Lighting Consistency Index (TLCI): > 95 • R9 Value: > 95 • Lamp life hour : L70 >50000 Hours @ 55°C • LM 80 Certificate of LED Chip along with lighting fixture must be submitted by the OEM to ensure the light source compatibility with required specification as mentioned above. Optical System • Light Beam Angle : Min 10° to 50° or more manually adjustable step less linear zooming • Fresnel lens: Lense Dia 200mm ± 5% to provide adjustable cone of light that has a soft edge, easily blended with adjacent beams to provide even illumination. • Lens Material: Annealed Fresnel lense made up of high quality, shock resistant borosilicate glass with brand name embossed on the Lense but without bubbles and crack to provide uniform light output. Electrical System • Power Supply Unit, Input : AC 100 - 260V 50/60Hz Output : 54V DC power supply. • Driver is comply with IEC/EN 61347-2-13 for safety standard, OEM must be provide test certificate • Power Consumption : 200W ± 15% • Secondary Safety glass fuse of 3 Amps with easy replacement position. • Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning • Focus type : Smooth focus adjustment from rear with thermoplastic Knob • Focusing Mechanism : Focusing mechanism of lights should be SS/Brass lead screw type for step less smooth zooming. |
| 286 | 400W LED BLINDER Light 3200K with RDM protocol and MS / Aluminium sheet duly epoxy polyester powder coated in black matt texture finish - Light Source • LED Lamp: 36V DC COB LED Max Power Consumption upto 100W / Piece • Correlated color temperature (CCT) : 3200K ± 200K • Color Rendering Index (CRI): > 95 • Television Lighting Consistency Index (TLCI): > 95 • R9 Value: > 95• Lamp life hour : L70 >50000 Hours @ 55°C • LM 80 Certificate of LED Chip along with lighting fixture must be submitted by the OEM to ensure the light source compatibility with required specification as mentioned above. Optical System • Light Beam Angle : 30° • Panel lens: PMMA LENS ARRAY combined with a special optical design produces uniform and pleasant lighting even when used with a mixture of different LEDs • Lens Material: Poly methyl methacrylate without bubbles and crack to provide pleasant light output. Electrical System• Make and Model : As per RDM ID information Mechanical System • Pan & Tilt Angle : 360° & 270° for rapid repositioning |
| 287 | 150W LED HYBRID MOVING Light with RDM protocol and Hi grade plastic body black color - Light Source • LED Lamp: COB LED Max Power Consumption upto 150W • Base Color : Cool White Optical System • Beam Angle: 3°-7° or More • Zoom Angle: 7°-21° or More • PC lens: Lense Dia 100mm ± 10% • Lens Material: Shock resistant borosilicate glass Electrical System • Power Supply Unit, Input : AC 100 - 260V 50/60Hz • Power Consumption : 200W ± 15% • Lighting Fixture must be provided with Minimum 3 Mtr Length 3 core 1.0Sq mm FRLS cable with 3pin IEC Male Plug. • Lighting fixture must be properly earthed and earthling cable should be connected with power supply chord. Control System • Control Protocol : RDM & Manual • Easy setup: locally and remotely by RDM protocol - integrated display • LED Lights must be CE certified to ensure required quality & reliability of the products. Copy of CE Certificates must be submitted along with offer. Mechanical System • Pan & Tilt Angle :540° & 240° 16bit electronic movement. • Zoom : Stepless Smooth electronic Zoom • Weight : 9 Kg ~ 12 Kg |
| 288 | Die cast Aluminium C - Clamp with safety chain duly epoxy polyester powder coated in black matt texture finish - Lock - MS threaded Galvanized lockkey, Plastic Glass filled nylon moulded M6 key. Receptacle - 28mm standard TV spigot. Safety - MS Galvanized chain with pin. Finish - Pretreated and black epoxy polyester powder coated. Self-weight - 0.54Kg Safe working load – 150Kg. |
| 289 | Safety bond with lock clip -Safety bond with lock clip to be fixed around the grid to avoid fall of the material in case if the \\"C\\" clamp is not locked properly. SWL 100Kgs. |
| 290 | 79mm Round Identification name plate dulyepoxy polyester powder coated in matt texture finish -Identification name plate round 79MM undergone through 7 Tank chemical treatment to keep them rust free and duly powder coated in matt White texture finish. |
| 291 | Fixed Stage lightbar 9 Mtrs Length made of dual barren 40NB pipe with black epoxy polyester powder coated - Dual barrel Light bar equipped with 40x75x40 Cable trunking with lid for better aesthetic look and for cable safety. Dual barrel pipe construction welded with 75x6mm MS Flat in every 2Mtrs for better strength |
| 292 | Fixed FOH lightbar 12 Mtrs Length made of dual barren 40NB pipe with black epoxy polyester powder coated - Dual barrel Light bar equipped with 40x75x40 Cable trunking with lid for better aesthetic look and for cable safety. Dual barrel pipe construction welded with 75x6mm MS Flat inevery 2Mtrs for better strength |
| 293 | Main Valance bar arrangement 12 Mtr Length made up of 40NB MS Pipe with required suspenders duly black epoxy polyester powder coated - Made using 40 NB, 48MM OD, 2mm thickness MS Pipe or higher size • Suitable suspender and clamps made with MS Angle of size 40x40x5 mm thick or higher size • Height adjustable M12 stud of suitable length as per site requirement along with suitable hardware’s with 40 NB pipe coupler clamp ifrequired.• All thematerials under gone through 7 tank process with various chemical treatment to keep them rust free with and duly epoxy polyesterpowder coated in black matt texture finish. |
| 294 | MS Fabricated 4 way IEC Lighting Junction box made up of 22SWG CRCA for LED lighting fixtures - MS Power junction box made up of 22SWG CRCAsheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt blacktexture finish CE approved 4 way 10A IEC Socket Fixing : Snap fit /15 (1.5mm), Total Max Rating : 10A, 250V a.c, Operating Temp : –20˚C to +70˚C,Moldings : Nylon, Flammability Rating UL94V-0 CE certified FC/PG 11 cable entry gland, Junction Box must be compact of Size : 140 x 112 x 50mm orless Pipe clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing |
| 295 | MS Power junction box made up of 22SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, dulyepoxy polyester powder coated with Matt black texture finish CE approved 2 way 10A IEC Socket SPST 4 Pins Toggle Button Rocker switch Fixing : Snap fit /15 (1.5mm), Total Max Rating : 10A, 250V a.c, Operating Temp : –20˚C to +70˚C, Moldings : Nylon, Flammability Rating UL94V-0 CE certified FC/PG 11 cable entry gland, Junction Box must be compact of Size : 140 x 112 x 50mm or less Pipe clamp arrangement for fixing or Raul plug arrangement for wall/floor fixing |
| 296 | MS Fabricated 5 pin DMX Signal OUT Junction box fitted with 5 pin DMX female plug made up of 22SWG CRCA, black epoxy polyester powder coated -MS Signal junction box made up of 22SWG CRCA sheet of undergone through 7 tank process with various chemical treatment to keep them rust free,duly epoxy polyester powder coated with Matt black texture finish. 5 pin XLR DMX OUT (Female plug) of reputed make connector, Extra high temperature resistant insulator material, All metal housing offers best overall RF protection & electromagnetic shielding, New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, Optional connection to easily join pin1 to chassis ground. CE certified FC/PG 7 cable entry gland, Junction Box must be compact of 125 x 112 x 50mm or less Pipe clamp arrangement for fixingor Raul plug arrangement for wall/floor fixing |
| 297 | MS Fabricated 5 pin DMX Signal IN Junction box fitted with 5 pin DMX male plug made up of 22SWG CRCA, black epoxy polyester powder coated - MS Signal junction box made up of 22SWG CRCA sheet of undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. 5 pin XLR DMX IN (Male plug) of reputed make connector, Extra high temperature resistant insulator material,All metal housing offers best overall RF protection & electromagnetic shielding, New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, Optional connection to easily join pin 1 to chassis ground. CE certified FC/PG 7 cable entry gland, Junction Box must be compact of 125 x 112 x 50mm or less Pipe clamp arrangement for fixingor Raul |
| 298 | MS Fabricated 5 pin DMX Signal Loop Junction box fitted with 5 pin DMX male & female plug with 0.3 Mtrs FR DMX Cable with cable mout plug made up of 22SWG CRCA, black epoxy polyester powder coated - MS Signal junction box made up of 22SWG CRCA sheet of undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish.1 Nos each of 5 pin XLR DMX IN (Male plug)&5 pin XLR DMX IN (Male plug) of reputed make connector, 0.3 Mtr Length Dmx Cable with Cable mouth 5 Pin XLR Male &Female loop Cable. Extra high temperature resistant insulator material, All metal housing offers best overall RF protection & electromagnetic shielding, New duplex ground contact for excellent contact integrity between chassis and cable connector, Larger solder contacts for easier termination, Optional connection to easily join pin 1 to chassis ground. CE certified 2 Nos of FC/PG 7 cable entry gland, Junction Box must be compact of 140 x 112 x 50mm or less Pipe clamp arrangement for fixingor Raul plug arrangement for wall/floor fixing |
| 299 | MS Fabricated Auxilliary marshalling box made up of 22SWG or lesser SWG CRCA sheet, black epoxy polyester powder coated - MS fabricated Auxiliary marshalling boxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. CE certified FC/PG 7 & 11 cable entry gland required Nos as per cable entry. MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. Grey terminal connector with each line having P, N, E Indication for each line incoming and out going cable connectors. Box door must be made with Hingeable door with screw lock. Pipe clamp arrangement for fixing |
| 300 | MS Fabricated Motor Cable Termintion box made up of 22SWG or lesser SWG CRCA sheet, black epoxy polyester powder coated - MS fabricated Motor Cable Terminationboxes made up of 20SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. CE certified FC/PG 11&13.5 cable entry gland required Nos as per cable entry. MS channel arranging to fix grey terminal connector, required nos with separation plate and each end is completed with adding end plate with end cap. Grey terminal connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection)Box door must be made with Hingeable door with screw lock. Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing |
| 301 | MS Perforated 75mm Wide Cable Tray with Lid, black epoxy polyester powder coated - MS perforated trays with press fit type tray lid Size 40 x 75 x 40mm & 1.6 mm Thickness undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish along with clamping arrangement. |
| 302 | bare copper for internal earthing system - Internal earthing copper bare conductor of size 10 SWG forpower network related to work coming under our scope. |
| 303 | Installation hardwares required for the successful execution of work - Installation hardware’s such as clamps, connectors, glands, lugs, ferrules, welding rods and miscellaneous items required during installation work. |
| 304 | MS Fabricated Direct Lighting distribution Panel fitted with 32A TPN Incomer and 12 Way SP MCB Panel duly epoxy polyester powder coated - Main Incomer 32A TPN. TPN Make:Out Going10A SP MCB’s for Lighting Junction Box Out Going 6A SP MCB’s for Splitter & Console R, Y, B Indicator lamp, CE certified Nylon FC/PG 11 7 & 21 glands for outgoingcables as per requirements 11/8\\" or Higher size Brass gland for incoming cable MS MCB channel required length for fixingof MCB’s All the MCB's identified by a Name plate with suitable code/Number, All the cables inside the panel routed through gray color cable trough. All the cables used inside the panel should be FRLS PVC Insulated copper multistrand flexible and must have ISI Marking. All the outgoing cables terminated through Grey terminal connector with each line having P, N, E Indication. Panel Including wiring and bus bar connection with proper earthing. Panel with Hingeable door with key door lock complete. Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing |
| 305 | SITC of Certified RDM Enabled 1 universe 256 channel, 24 Fixture Control DMX Lighting Console for RDM/DMX network with LCD screen for easy navigation - 256 or 512 or 1024Channels 24 individual fixture control 3 or more encoder wheels LCD Display Support RDM &Art net |
| 306 | SITC of MS Fabricated Combined 1 Way Motor Control Center Panel with Remote control panel for light bars duly epoxy polyester powder coated - 16A TP or TPN Incomer. TP/TPN R, Y, B Indicator Lamp Volt Meter to read the incoming voltage of each phase. Main Contactor of 9A 240V 4 pole contactor with 04 -06A Over Load relay for safety 24V 4 pole Low Voltage Contactors for each motor outgoing 24V 4 pole Low Voltage Master Up & Down Contactors 240V / 24 V Step-down transformer for Low voltage Contactors Terminal Fuse connectors for each output as additional safety. CE certified Nylon FC/PG 13.5 glands for outgoing cables as per requirements 7/8\\" or Higher size Brass gland for incoming cable connector with each line having L1, L2, L3, E, 6 , 2 , 4 Indication for each line incoming and outgoing cable connectors (L1, L2, L3, E for Power supply & 6 , 2 , 4 for Limit Switch connection) Panel Including wiringwith proper earthing. Panel with Hingeable door with 2 Nos key door lock complete. Grid mount fixing arrangement for fixing on grid or Anchor fastener for wall/floor fixing |
| 307 | SITC of RDM Compatible DMX Splitter with 1 DMX in and optically isolated 8 DMX out port for DMX network - Splitter enclosure made up of MS 18/16 SWG CRCA sheet undergone through 7 tank process with various chemical treatment to keep them rust free, duly epoxy polyester powder coated with Matt black texture finish. Control Protocol RDM and DMX 512 2 DMX input 5 pin XLR Connectors 8 optically isolated DMX output 5 pin XLR Connectors IEC male plug to power supply the splitter LCD Display in the front to check the signal flow 4 Nos of high precision tactile switch for mode selection. Splitter bracket for mounting or 19” rack mount |
| 308 | Various Cables & Connectords as per site requirement |
| 309 | Fire fighting equipments |
| 310 | Supply installation testing and commissioning of ISI marked ABC 6 kg Capacity with ISI Certificate. |
| 311 | Supply installation testing and commissioning of CO2 4.5 Kg capacities. The extinguisher shall confirm to IS 2878 and have Certification mark and with Certificate. |
| 312 | Add GST 18 % |
| 313 | Add Labour cess 1% Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
