|
| 1 | SCHEDULE \\"A\\" |
| 2 | Item No 1: Removing old tar felt and loose dirt, complete all as specified and directed by Engineer-in-Charge. |
| 3 | Item No 2: M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:4 mixed with water proofing compound on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.(Note-WPC will be measurd and paid seprately) |
| 4 | Item No 3: applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. |
| 5 | Item No 4: M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. |
| 6 | Item No 5: Applying two coats of aluminum paint on top of membrane,complete all as specified and directed by Engr-in-Charge. |
| 7 | Item No 6: Dismantling floor hearth or wall tilling,cement concrete tile, terrazzo tiles, including cement mortar bedding (but not backing ) removing serviceable tiles to store and rubbish off the premises |
| 8 | Item No 7: S & F Non - skid colour Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:4 all as specified. |
| 9 | Item No 8: M&L Glazed ceramic colour tiles in vertifical surface 450X300X7/ 350X250X 7mm thick with necessary border etc set and jointed in neat cement slurry and pointed in coloured cement to match over including 10mm thick renderting/ backcoating in cement mortar 1:4 all as specified and directed |
| 10 | Item No 9: Taking up or down, 15mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 11 | Item No 10: Taking up or down, 20mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 12 | Item No 11: Taking up or down, 25 mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 13 | Item No 12: Taking up or down, 40mm bore, existing steel tubing and connections including cleaning for refixing or removal to stores complete all as specified and directed |
| 14 | Item No 13: Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 15 | Item No 14: Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors including chase cutting and fixing with solvant suitable for CPVC pipe and brass treaded fittings for fixing taps and valves, complete all as specified and directed. |
| 16 | Item No 15: Supply & laying of Tubes, 'mediam grade'dia 25mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 17 | Item No 15A: Supply & laying of Tubes, 'mediam grade'dia 40mm galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 18 | Item No 16: Dismantling of Stone slabs and kota stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed. |
| 19 | Item No 17: M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over Screed bed or bedding layer of cement mortar(1:6), 20 mm thick for laying floor finishes, including rubbing and mirror polishing complete all as specified and directed |
| 20 | Item No 18: M&L Machine cut kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar, over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, over 10 mm thick cement plaster (1:4), on fair faces of brick work or concrete surface as backing, including rubbing and polishing complete all as specified and directed |
| 21 | Item No 19: M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as sub base course,including demolition of old existing concrete, complete all as specified and as directed. |
| 22 | Item No 20: Demolition of reinforced cement concrete Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, complete all as specified and directed |
| 23 | Item No 21: M&L Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,chajja etc. also splays between floors and beams, etc, flat surfaces of concrete rough finished. |
| 24 | Item No 22: M&L Formwork to chullah hoods, chajjas, troughs and similar items including edges flat surfaces of concrete rough finished. |
| 25 | Item No 23 M&L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (20mm graded aggregate) in:-Beams, cantilevers, bressummers, lintels over 1.5m span |
| 26 | Item No 24: M&L Reinforced cement concrete (nominal mix) TypeB0 1:2:4 (20mm graded aggregate) in:-chajjas |
| 27 | Item No 25: S&F,TMT Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified by Engr-in-Charge |
| 28 | Item No 26: S&F,TMT Bar 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified by Engr-in-Charge |
| 29 | Item No 27: M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | Item No 28: Material and labour for 15mm thick (in two layers 10mm+5mm) cemet plalster in CM 1:4 over brick wall / concrete surfaces using WPC, finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge. (Note-WPC will be measurd and paid seprately) |
| 31 | Item No 29: M&L for 10 mm thick rendering on concrete surface of wall in CM 1:6 and rendering is to be finished even and smooth with out using extra cement |
| 32 | Item No 30: M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement |
| 33 | Item No 31: M & L for complete removal of existing treatment on wall with water pressure gun and wire brush, and filling cracks, holes,etc all as specified and directed by Engr-in-Charge. |
| 34 | Item No 32: M&L for 1 mm thick wall care putty on wall complete all as specified and directed |
| 35 | Item No 33: M&L for preparattion of old surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed by Engr-in-Charge. |
| 36 | Item No 34: M&L for preparattion of new surfaces of wall and applying one coat of oil bound destemper complete all as specified and directed by Engr-in-Charge. |
| 37 | Item No 35: M&L for subsequent coat of oil bound distemper complete all as specified and directed by Engr-in-Charge. |
| 38 | Item No 36: M & L for preparation of new plasterd or unplastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed |
| 39 | Item No 37: M&L for preparing new plastered surfaces and applying three coats of white wash on wall |
| 40 | Item No 38: M & L for preparation old plastered or unplastered applying one coat of white wash of old surfaces of ceiling complete all as specified and directed |
| 41 | Item No 39: Material and labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surface |
| 42 | Item No 40: Taking down chowkats and frame n.exc 1.5 Sqm each (Door/window/Ventilator ) including shutters without taking off shutters from the frame and removing from site. |
| 43 | Item No 41: Taking down chowkats and frame exc 1.5 Sqm but n.exc 4.00 sqm each including shutter wiuthout taking off shutter from the frame and removing from site. |
| 44 | Item No 42: S & F S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing as per specification & drawing shown on Page No. 160 of SSR 2010 part II. |
| 45 | Item No 43: S&F Factory Made Solid PVC double Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 5mm thick Moulded PVC Sheet on the front face & 5mm thick plain colour PVC sheet on back face, with MS square tube along the frame with wood free EPS supplying & fixing in frame at site as per specification & drawing all as specified and directed by Engr-in-Charge. |
| 46 | Item No 44: S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 125x60mm for doors, with double rebates including necessary fixing lugs, hinges, lock strike plate etc making good complete all as specified & directed by Engr-in-Charge. |
| 47 | Item No 45: S & F Pressed steel frames made of 1.25 mm thick MS Sheet size 105x60mm for doors, with single rebates including necessary fixing lugs, hinges, lock strike plate etc making good complete all as specified & directed by Engr-in-Charge. |
| 48 | Item No 46: M&L for 35 mm thick 2nd class hard wood glazed/gaused and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 8.24(a) and fixed to chowkat, complete all as specified. |
| 49 | Item No 47: S&F 35 mm factory made shutters of second class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkat complete all as specified and directed |
| 50 | Item No 48: S&F 100mm long Butt hinges,medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 51 | Item No 49: M&L for 150 mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 52 | Item No 50: M&L for 150 mm long aluminium anodised handles, oval type, stove enamelled black complete all as specified and directed. |
| 53 | Item No 51: M&L 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 54 | Item No 52: M & L for preparing new or previously untreated wood surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified |
| 55 | Item No 53: Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primere complete all as specified. |
| 56 | Item No 54: M & L for preparation of old painted steel surfaces of any description over 10 cm in width or girth not otherwise described and applying one coats of synthetic enamal paint complete all as specified and directed. |
| 57 | Item No 55: M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. SCHEDULE OF CREDIT Srl No. Item Description Unit Quantity Rate Amount |
| 58 | Item No 55: M&L preparing old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. SCHEDULE OF CREDIT Srl No. Item Description Unit Quantity Rate Amount |
| 59 | 2.0 B/R Items |
| 60 | Old u/s curtain rod, knob, bracket of any description |
| 61 | Old Unserviceable CP Bib tap, pillar tap of any size any description |
| 62 | Old U/s stop cock, angle cock, shower rose of any size any description. |
| 63 | Old u/s Flushing cistern Low level/High level |
| 64 | Old u/s PVC connection/waste pipe of any description. |
| 65 | Old U/S CP wall Mixer |
| 66 | Old 15 mm dia GI tubing |
| 67 | Old 20 mm dia GI tubing |
| 68 | Old 25 mm dia GI tubing |
| 69 | Old 40mm dia GI tubing |
| 70 | Old 75/100 mm PVC (SWR) Pipe of any dia any desription |
| 71 | Old Unserviceable chowkhats with shutter exc 1.5 sqm non exc 4 sqm each including all fittings |
| 72 | Old Unserviceable wooden/steel chowkhats with shutter of door/window/ventilator n. exc 1.5 sqm including all fittings |
| 73 | Old brick bats of Any Description |
| 74 | Scrap Iron |
| 75 | Old unserviceable PVC water tanks 2000 ltr capacity including ball valves . |
| 76 | Old U/S Stone slab E/M Items |
| 77 | Old /UNSV point wiring ( including such as switches, sockets, ceiling roses, holders) of any type and size. |
| 78 | Old /UNSV tube light fitting/Bldg security light fitting/Down lilght fitting if any size and type. |
| 79 | Old /UNSV MCB DB/Main switch of any type and size. |
| 80 | Old /UNSV fan regulator of any size and type. |
| 81 | Old / UNSV MCB/ ISOLATOR OF ANY Capacity |
| 82 | Old UNSV sub main wiring . |
| 83 | Old UNSV Earthing |
| 84 | old US cable any size |
| 85 | old US GI pipe |
| 86 | old US bricks Total Amount 539377.25 NOTES:-1. The quantities shown in column (4) are approximate and are inserted as guide only. The actual quantities obtained from ismantling/demolition/takingdown under schedule shall be considered for credit.2. The rate given under Column (5) is firm and no variation in the rate will be allowed. The credit worthiness of the materials for which the credit is to beoffered by the contractor shall be deemed to have been ascertained by him before quoting his tender No claim onthis account shall be entertained. 3. Credit amount as indicated below shall be recovered from the contractor's dues inrelevant RAR's but in any case before removal of the demolished materials from work site. 4. The demolished materials shall be removed from site from time to time as directed by GE. However, the contractor shall be permitted to remove the demolished materials becoming his property only after the amount is deposited by the contractor. 5. No separate payment for removal of the old material including disposal of debrisshall bemade & the same shall bedeemed accounted for in the credit. Please Enable Macros to View BoQ information |
