|
| 1 | Clean removal of cement plaster from walls including all cost and conveyance labour charges etc,complete as per standard specifications ( PWD W-0105) |
| 2 | Plastering with cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)) 20mm thick in all floors including cost and conveyance of all materials to site and labour charges etc, complete complying with standard specifications (S.I.309) ( MDU-BLD 34 ) |
| 3 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat,including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification (MDU-BLD 94) |
| 4 | Painting old wall surface with Two coat of Plastic Emulsion aint of approved quality including cleaning of plaster surface with soap soda and waterby manual labour. (MDU-BLD 91) |
| 5 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of0.40Kg/sq.m., curing, etc.,complete complying with standard specification and as directed by the departmental officers. (MDU-BLD 63) |
| 6 | Paving the floor with best quality vitrified Tiles of following size and variety conforming IS 15622 with water absorbtion less than 0.08% of approved colour and shade laid over cement mortar bed of 20mm thick in cement mortar 1:3 (one cement and three crushed stone sand) with required Cement Slurry and Mortar Plasticizer in all floors and the top pointed with Water Resistant Tile Epoxy Grout etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)( MDU-BLD 69)Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mm |
| 7 | Dismantling Brick / Stone Masonry in cement mortar walls under 3m hight etc,. (PWD 25-26 W-0015 ) |
| 8 | Dismantling the damaged Weathering course and pressed tiles (PWD 25-26 W-0037 ) |
| 9 | Dismantling RCC by manual / by using deploying machineries etc.complete.., (PWD 25-26 Sl no W-0035 PG NO:30) |
| 10 | Painting two coat on old Iron works with best synthetic enamel paint of approved color and qualityetc.,(Corp. Data 25-26 Pg-14 ) |
| 11 | AC Ceiling Fan complete 1200 mm (48\\") Sweep with 300mm Down Rod (without Regulator) (Electrical 25-26 Sl-SD 467) |
| 12 | Wiring with 2 x1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch and making good of the concealed portion with suitable colour for PVC concealed light / Fan Point (For electronic regulator) (5 Points Per Coil) SD -20(Electrical 25-26 Sl-SD 1) |
| 13 | supply and fixing of 18W LED square type recessed fitting with LED (Lower end) (Electrical 25-26 Sl - SD 440 |
| 14 | Add GST 18% Please Enable Macros to View BoQ information |
