|
| 1 | M&L for complete removal and preparation of old decorated treatment on walls (external / internal) and ceiling finishes by scrapping with trucare wall sander L-01/ H-01 (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80/36 Grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint etc. or equivalent makes viz Xpress sanding machine having suction vacuum bag or by manual scrapping tools where mechanical removal is not possible and filling cracks, holes etc complete and algae and fungus on the wall to be removed by using high pressure wash or coir brush and shall be treated with fungicidal solution, all surface cracks upto 5 mm width should be filled up with Dr Fixit Crack-X-paste. Cracks more than 5 mm and all separation gaps should be filled up with Dr Fixit Pidicrete URP modified mortar or as specified complete all as specified and directed. |
| 2 | M&L for waterproof cement based putty @ 1 Kg (undiluted) per sqm of average thickness 2 mm over the plastered /old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps :- Step 1: Mix the putty powder by adding water as per manufacturers instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2: Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minute with a maximum pressure 3300 PSI.Step 3: Allow 6-8 hours time to dry the putty surface. |
| 3 | M&L for one coat of weather coat primer interior/exterior grade @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI for external surface only and applied roller for internal surface only. Allow 6-8 hrs to dry the surface for painting of subsequent coats, complete all as specified and directed. |
| 4 | M&L for preparation of old/ new decorated surface treatment on wall/ ceiling and applying two coats of acrylic emulsion paint with minimum coverage 8-10 sqm /ltr of approved tint on prepared surfaces as per approved manufacturer's instruction complete all as specified and directed. |
| 5 | M&L for applying two coats of weather proof grade exterior acrylic emulsion paint of approved tint with crack filling upto 5 bars of positive hydrostatic pressure on verticle walls without any dilution with forced coverage not more than 3.5 sqm/ ltr as per manufacturer's instructions and all coats to be applied with fully automatic airless spray machine of paint application with a flow speed of minimum 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in subsequent coats of paint complete all as specified and as directed.Make : Apex Ultima Protek Asian paints paints/ Nerolac excel top guards/ Berger weather coat long life of 5 years. |
| 6 | Note for item No. 1 to 5 :-The work for periodical services shall include the following and the rates quoted by the bidders shall include the same :-(i) All painting works shall be got executed through original materials manufacturing company or their authorised applicators as approved by GE and contractor should submitt MOU with the manufacturing company or their authorised applicators before execution of work and entire work shall be executed with the approved firm.(ii) The Contractor shall upload with the documents under cover I \\"Memoradum of Understanding\\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected.(iii) Contractor shall give guarantee from OEM of 5 years for effectiveness of painting carried out by them from the certified date of completion of work.(iv) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. |
| 7 | (v) Removing of Nails, making good holes, cracks etc(vi) Work in patches and in narrow / widths, bands, cornices, pilasters etc and cutting in edge of line where necessary.(vii) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes.(vii) Washing floors, cleaning glass, joinery , electric fittings , wirings etc. Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge, failing which a recovery amount of Rs 30 per Sqm.(ix) Sample patch of 10Sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work.(x) The container of paint should be under custody of concerned JE. Contractor will be collect from store before painting(xi) Colour and shade as per new colour scheme as Selection by GE/Engr-in-Charge. |
| 8 | Taking down cement plaster of any description from brick wall, ceiling, cornices or any surfaces etc including racking out joints and hacking for key, scrubbing down with water etc including all necessary scaffolding arrangments of any hieght complete all as specified and directed. |
| 9 | Material and labour for rendering 10 mm thick on fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 10 | M&L for 5mm thick rendering in 1:3 CM on ceiling, RCC facia and chujja of fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for 15mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finished fair and even mixed with Liquid Water Proofing Compound finished even and smooth without using extra cement at any height including necessary scaffolding, ladder, formwork etc complete all as specified and directed.Note: Water proofing compound shall be measured and paid separately. |
| 12 | Supply only liquid Water Proofing Compound. |
| 13 | M & L for preparing newly plastered surfaces of walls and applying two coats oil emulsion paint over one coat of chalk white primer complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 14 | M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat alkali resistant priming paint complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 15 | M&L for three coats of white wash on newly surface of ceiling including all preparation complete all as specified and as directed. |
| 16 | M & L for complete removal existing treatment of old decorative surface of walls (i.e. white wash, colour wash, cement base paint, synthetic enamel paint etc.) and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 17 | M&L for complete removal of existing treatment (Cement Base Paint/White Wash/OBD/Exterior weather paint/Oil paint etc) of external decorative surface from walls, cornices, jambs, cills, parapet wall, pillars etc or any other description by scrapping with mechanical wall sander (having mechanical vacume mechanism) with RPM not less than 1500, sanding pad of 80/52 grit having dia of 7\\"/9\\" to make the surface free from dust, loose paint, removal of nails etc including fillings depression surfaces, cracks/holes by waterproof cement based putty complete by skilled labour to the entire satisfaction complete all as specified and directed. |
| 18 | M&L for preparation of external old decorative surfaces of walls and applying two coat of weather shield/weather proof Acrylic exterior emulsion paint by skilled labour and applying one coat of acrylic water based exterior grade primer @ 0.8 ltr (undiluted) / 10 Sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. Note : Shade and pattern of the colour will be approved by GE. |
| 19 | M& L for preparing of old external decorative surface of walls and applying one coat of cement base paint, including cracks filling with exterior wall care putty where ever necessary complete all as specified and directed. |
| 20 | M & L for complete removal existing treatment of old external decorative surface of walls and applying two coats of cement base paint over a coat of cement primer, including filling cracks with exterior wall care putty wherever necessary complete all as specified & directed. |
| 21 | M&L for preparing of old decorative surface of walls and applying one coat of white wash on walls including cornices etc complete with cracks filling with wall care putty where ever necessary complete all as specified and directed. |
| 22 | M & L for preparing of old decorative surface of ceilings and applying one coat of white wash on ceiling including cornices etc complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 23 | providing and applying wall care purrty of 3 mm thickness over old/new plastered surface to prepare the surfrace even and smooth complete all as specified and directed. |
| 24 | M & L for preparing of old decorative distempered internal surface of walls and applying one coat of interior acrylic emultion paint complete including filling cracks with wall care putty wherever necessary complete all as specified & directed. |
| 25 | M & L for preparation of old painted wooden surfaces by applying mechanical sander of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 26 | M & L for preparation of old painted steel surfaces by applying mechanical sander of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified & directed. |
| 27 | M & L for complete removal of old painted surface (Cement Base Paint/White Wash/OBD/Exterior weather paint/Oil paint etc) like curve stone, concrete surface, plastered or unplastered surfaces etc by using steel wire brushing or otherwise over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint including cracks filling of required filling compound where ever necessary complete all as specified & directed. |
| 28 | M & L for Cleaning and removing all scale and dirt, etc from existing water storage tanks and from mouths of circulating pipes, etc and washing down with detergent powder of capacity exceeding 250 litres and not exceeding 500 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning, including writing date of cleaning and next due date with oil paint of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) Note: - A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 29 | M& L for Cleaning and removing all scale and dirt, etc from existing water storage tanks and from mouths of circulating pipes, etc and washing down with detergent powder of capacity exceeding 500 litres and not exceeding 1000 litres by emptying, drying and cleaning the tank by scrubbing the dust with wire brush from tank including cleaning from mouths of circulating pipes, to entire satisfaction of Engr-in–charge of cleaning, including writing date of cleaning and next due date with oil paint of visible colour in font size not less than 100 mm high complete all as specified and directed. (The rates includes for disconnecting of existing water tank, lowering if required and hoisting, reconnecting and refixing in same position after cleaning ) Note : - A separate register to be maintained by contractor for cleaning and occupant signature with date to be obtained in it. |
| 30 | M & L for writing letters or figures (Block. Roman, Italic or Indian) n exc. 30 cm high with thick synthetic enamel paint for marking of building Nos complete all as specified & directed. |
| 31 | Note:- The amount against the Schedule of Credit mentioned in the tender document shall be deducted from the total amount quoted against Sch 'A' while deriving the Contract Sum for Acceptance. Please Enable Macros to View BoQ information |
