|
| 1 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 2 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 3 | Dismantling structural steel work including doors, gates and Window but excluding framed truss etc.complete all as specified and directed |
| 4 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed |
| 5 | Material and labour for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified and as directed. |
| 6 | Material and labour for 15 mm thick rendering in cement mortar 1:6 on fair face of brick or concrete surface finished even and fair complete all as specified and as directed. |
| 7 | Material and labour for preparation to newly plastered/previously untreated wall and apply two coat of oil bound distember over a coat of 1 mm layer wall care putty over a coat of primer complete all as specefied and directed. |
| 8 | Material and labour Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing (Grade A )Compound complete all as specified and directed. |
| 9 | Material and labour for reinforced cement concrete (nominal mix) 1:2:4 Type B1( 20 mm graded stone Aggregate ) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 10 | Material and labour for 100mm thick PCC 1:4:8 type D2 (40mm graded stone aggregate) as sub base of floor path etc. complete all specified and directed. |
| 11 | Material and labour for use and waste formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 12 | Material and labour for reinforced cement concrete (nominal mix) 1:2:4 Type B1( 20 mm graded stone Aggregate ) in beams,cantilevers,bressummers, lintel over 1.50m clear span complete all as specified and directed. |
| 13 | Material and labourfor use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc..complete all as specified and directed. |
| 14 | Material and labour for mild steel TMT Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending,mspirally for hooping for columns, hooking ends and binding with and includingmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 15 | Ditto, TMT Bar but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 16 | Material and labour for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but notexceeding 0.38 sqm, infloors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match ,in cement mortar 1:4 to complete all as specified and directed. |
| 17 | Material and labour Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in Skirting/Dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in CM 1:4 as backing coat complete all as specified and as directed. |
| 18 | Material and labour for 75 mm thick cement concrete 1:3:6 type C- 2, (using 40mm graded crushed stone aggregate) as in plinth protection including necessary formwork complete all as specified and directed. |
| 19 | Material and labour for Non asbestos fibrecement buildingboards 6 mm thick of size 600mm x 600mm fixed orlaid/ inserted to timber/GI/Aluminium frameworkwith screwcomplete all as specified and directed. |
| 20 | Supply and fixed Anodised aluminium snap grid frame work for false ceiling all as specified Size of grid 605 x 605mm for celling complete all as specified and as directed. |
| 21 | Supply and fixed pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, |
| 22 | Supply and fixed Pressed Steel Windows/Ventilator using box type hinges, MS Spring Latch, MS tower Bolt and telescopic stay complete complete all as specified and directed. |
| 23 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide all as specified and directed. |
| 24 | Supply and fixed 40 mm thick, flush shutters, solid core construction, with particle board core and ply wood face panels commercial type on both sides all as specified and directed |
| 25 | Material and labour for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 26 | Supply and fixed Butt hinges, medium weight, cold rolled mildsteel 100 mm, and fixed complete all as specified and directed. |
| 27 | Supply and fixed 150 mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 28 | Supply and fixed 300 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixedcomplete all as specified and directed. |
| 29 | Supply and fixed Mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed. |
| 30 | Supply and fixed 4.0 mm thick sheet glass ordinary/tinted quality and glazing with oil putty in squares exc 0.5 sq. m in each pane in squares. |
| 31 | Material and labour for 15 mmthick Rendering (Internal Plastering) in cement mortar 1:4 on fair faces of brickwork or concrete surface without using extra cement .complete all as specified and directed. |
| 32 | Material and labour for preparing the new plastered surfaces and applying two coats of cement base paint on walls complete all as specified and directed. |
| 33 | Material and labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 34 | Material and labour Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 35 | Material and labour except sheeting galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 36 | Material and labour hardcore of broken stone of bolder of gauge n exc 63mm, deposited spreaded , levelled in layers n exc 15 cm thick watered and rammed to true surface all as specified complete all as specified and directed. |
| 37 | Surface excavation in soft/loose soil n exc 30 cm deep and averaging 15 cm deep and getting out (Upto 3.00 M beyond outer face of external wall) complete all as specified and directed. |
| 38 | Excavation in trenches n exc 1.5 m wide n exc 1.5 m deep in soft/ loose soil for foundation etc or for shaft, wells, manholes etc n exc 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed. |
| 39 | Material and labour for cement concrete 1:4:8 Type D 2 (using 40 mm graded aggregate) as in foundations, filling and mass concrete complete all as specified and directed. |
| 40 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 41 | Material and labour for treating the bottom and sides of excavation at the rate of 5 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per square metre of surface area complete all as specified and as directed. |
| 42 | Material and labour for treating the backfill in contact with foundation at the rate of 7.5 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per square metre of vertical surface complete all as specified and as directed (Area of the sub structure in contact with backfill to be measured). |
| 43 | Returning ,filling in including spreading ,levelling watering and well ramming of soft/loose soil in layers n exc 25 cm thick complete all as specified and directed. |
| 44 | Removing excavated soil not exceeding 50 m distance and depositing where directed at alevel n exc 1.5 metre above the starting point complete all as specified and directed. |
| 45 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 46 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate)as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 47 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded aggregate) as in chajjas complete all as specified and directed. |
| 48 | Material and labour for reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 49 | Material and labour for use and waste formwork to sides of concrete foundations, footings, bases of col umns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; rough finished surfaces of conrete flat complete all as specified and directed. |
| 50 | Material and labour for use and waste formwork to sides of squar ,rectangular or polygonal pillars, posts, struts, piers, columns and stanchions rough finished surfaces of conrete flat complete all as specified and directed. |
| 51 | Material and labour for use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc rough finished also splays between floors and beams, etc complete all as specified and directed. |
| 52 | Material and labour for use and waste formwork to soffits of suspended slabs such as roof slab , floor slabs , landing ; and similar work not exc 200mm (horizontal or sloping) thick; rough finished surfaces of concrete flat complete all as specified and directed |
| 53 | Material and labour for use and waste formwork to chullah hoods, chajjas, troughs and similar items in cluding edges, rough finished surfaces of conrete flat complete all as specified and directed. |
| 54 | Material and labour for use and waste formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide ,rough finished surfaces of conrete flat |
| 55 | Material and labour for mild steel TMT bars 6 to 8mm dia and over, cut length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 56 | Supply and fixed 35 mm thick 2nd class hard wood Glazed and skelton shutter(minimum three panel) open rebated and prepared to receive glass, gauze etc edges of the framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members as specified all as specified and directed |
| 57 | Supply and fixed Stainless steel wire cloth.0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 58 | Supply and fixedAnodised aluminium frame (Two/three track) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 59 | Supply and fixed Anodised aluminium window and ventilator shutters, sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, etc.complete all as specified. |
| 60 | Material and labour for 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 61 | Supply and fixed Butt hinges of 125 mm size, Medium weight, cold rolled mildsteel and fixed, complete all as specified and directed. |
| 62 | Supply and fixed extruded aluminium alloy handles, fabricated type., anodised Size of handle in mm 125 complete all as specified and directed. |
| 63 | Material and labour for treating the top surface of filled earth at the rate of 5 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per square metre of surface complete all as specified and as directed. |
| 64 | Material and labour for mild steel small articles as holdfasts etc complete all as specified and directed. |
| 65 | Material and labour for cement concrete 1:3:6 Type C 1 (using 20 mm graded crushed stone aggregate) as in filling around pressed steel frames and bed blocks etc complete all as specified and directed. |
| 66 | Material and labour for preparing new plaster surfaces walls including chajjas, facias etc. and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 67 | Material and labour for rendering 15mm thick in two layer 10+5 mm in cement mortar 1:4 in with WPC in top coat on fair faces of brick work or concrete surface of walls finished fair and even complete all as specified and as directed.Note :- WPC will be measured separately. |
| 68 | Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of ceiling, chajjas of concrete surface, finished even and smooth without using extra cement complete all as specified and as directed |
| 69 | Supply only liquid integral water proofing compound complete all as specified and directed. |
| 70 | Material and labour for treating the soil along with external perimeter of building at the rate of 2.25 litres of chemical emulsion in water of one percent Chlorpyrifos 20 EC for per metre of the perimeter wall complete all as specified and as directed. |
| 71 | Material and labour for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and providing 10 mm thick cement plaster in CM (1:4) using water proofing compound @ 3 % by weight of cement for filling depression if any to receive water proofing treatment and providing APP modified bituminous membrane water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3.6 kg/sqm ± 5% per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/Sqm by the same membrane manufacture of density at 25 C, 0.87-0.89 kg/litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane torch application method overlap while torching shall be 75 mm on length and 100 mm width side, all angles & bituminous should sealed with extra care to ensure full bondage all joints including for applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed by Engineer-In-charge (Note : WPC shall be measured and paid separately) |
| 72 | Material and labour for brickwork with sub class ‘B’ bricks, straight or curved on plan to anyradius in half brick thick walls built in in cement mortar 1:4 complete all as specified and as directed. |
| 73 | Supply and fixed factory made solid panel PVC door shutler 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered WiUl hea moulded plain colour PVC 'C' chrume having a PVC sheet sh'ip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. fraine welded / sealed to the stiles & rails with suitable PVC shee beading, and joined together with solven cement, suppling & fixing in the frame a site as per specification & drawing |
| 74 | Supply and fixed solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 75 | Material and labour for Non - skid Ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement to match existing surface including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and as dierected. |
| 76 | Supply and fixed 25mm Gun-metal globe or gate valves, with iron wheel headt screwed both ends for iron pipe and fixed complete all as speccified and as directed. |
| 77 | Supply and fixed 25mm Ball brass valves. high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed |
| 78 | Supply and fixed 110 mm nominal dia PVC (SWR) pipes single socketed, with rubber ring joints fixed to wall complete all as specified and as directed. |
| 79 | Supply and fixed 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 80 | Supply and fixed rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe for connecting inlet, outlet, over flow and washout pipes all as specified and as directed. |
| 81 | Supplying and laying CPVC pipes for potable hot and cold water distribution, nominal size 15 mm, pressure class 1, SDR 11 including plain CPVC fittings of pressure class 1, SDR 11 in wall/ ceiling or under floor complete all as specified and as directed. |
| 82 | Supplying and laying CPVC pipes for potable hot and cold water distribution, nominal size 20 mm, pressure class 1, SDR 11 including plain CPVC fittings of pressure class 1, SDR 11 in wall/ ceiling or under floor complete all as specified and as directed. |
| 83 | Supply and fixed vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe |
| 84 | Supply and fixed Pillar taps 15mm, cast copper alloy, with capstan heads, chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed complete all as specified and directed |
| 85 | Supply and fixed 15MM dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed but fancy type, chromium plated |
| 86 | Supply and fixed Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe |
| 87 | Supply and fixed 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 88 | Material and labour for precast cement concrete in win- dow or door cills, lintels, bressumers, steps, quoin blocks (for use with ma sonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling). corbels, brackets, etc. (of any section indicated), with plain fair faces, including cham fers, weatherings, throat- ing etc. Cover slabs (for man holes etc.) chullah hoods, chajjas,water troughs,mangers, shelves and similar articles with plain faces Type B1 1:2:4 (20mm graded naggregate) and setting in mortar complete with joints to match complete all as specified. |
| 89 | Material and labour for machine pressed precast concrete interlocking paver block M-35 Grade any shape and size confirming to IS 15658-2006 of 60 mm thickness, with grey cement and pigment including 50 mm thick dry sand under complete all as specified and directed. |
| 90 | Material and labour for cement concrete, 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate ) as in coping rounded or chamfered on edges complete all as specified and directed. |
| 91 | Supply and fixed grating doom 100 mm dia of PTMT (Minimum weight 25gms) fixed complete all as specified and as directed. |
| 92 | Supply and fixed for Soap dish, any type, fixed to plugs with chromium plated brass screws fixed complete all as specified and directed. |
| 93 | Supply and fixed PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 94 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials all as specified and directed by engineer in charge. |
| 95 | Material and labour for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FR LHS in and including concealed PVC conduit 20/25 mm dia medium duty ISI marked with all necessary fittings for mounting of modular switches/sockets including 1.5 sq mm FRLHS PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light/ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engr- in-charge. |
| 96 | All as per item No. 95 above but 3 pin 5 amps socket out let point with the same board with other switches with cables of 1.5 Sqmm size complete all as specified and directed. |
| 97 | All as per item No. 95 here-in-before but using 2.5 sq mm size stranded copper conductor cable for one 16 amp switch socket outlet on independent board including 2.5 sq mm FRLH/S PVC insulated unsheathed stranded copper conductor as earth lead complete all as specified and directed. |
| 98 | Supply and fixed Sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 4 modules complete all as specified and directed. |
| 99 | -do- all as per item No 98 above but for 6 modules complete all as specified and directed. |
| 100 | -do- all as per item No 98 above but for 8 modules complete all as specified and directed. |
| 101 | Supply and fixed ceiling rose, 3 ph plastic round PVC/polycarbonate isolated body for mounting ceiling fan/exhaust fan/light fittings complete all as specified and directed. |
| 102 | Supply and fixed modular cover plate with frame for fixing of modular switches/sockets for 4 modules complete all as specified and directed. |
| 103 | -do- all as per item No. 102 above but for 6 modules complete all as specified and directed. |
| 104 | -do- all as per item No. 102 above but for 8 modules complete all as specified and directed. |
| 105 | Supply and fixed switch piano modular flush type 5/6 Amps 230V AC complete one way complete all as specified and directed. |
| 106 | Supply and fixed modular socket 6A out let 2/3 pin 5 Amps flush type complete all as specified and directed. |
| 107 | Supply and fixed modular switch socket outlet multipurpose 3 pin 15 Amps and one pin 5 Amps controlled by one switch complete all as specified and directed. |
| 108 | Supply and fixed fan step regulator, 120W - 2 module complete all as specified and directed. |
| 109 | Supply and fixed Flameproof cum Waterproof LED Bulk Head light fitting of 30W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size |
| 110 | Supply and fixed surface and wall mounted LED batten 4feets with 1x20W indoor decorative luminaries with and including electronic driver and 1x20W LED lamp,pre wired including necessary electric connection copper flexible PVC cable of 0.5 sqmm 3 core not more than 1m in length from ceiling rose to light fittings. |
| 111 | Supply and fixed sheet metal enclosure for DB's when MCBs to be used 8 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. |
| 112 | Supply and fixed MCB 6 to 32 amps single pole amp rating 240V, 10KA breaking capacity 'C' Curve complete all as specified. |
| 113 | Supply and fixed MCB DP 40 amps 240 volts 10KA breaking capacity 'C' Curve complete all as specified. |
| 114 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth all as specified and directed by Engineer-in-charge. |
| 115 | Material and labour for point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm FRLHS in and in PVC casing & caping of suitable size duty ISI marked with all necessary fittings for mounting of modular switches/sockets including 1.5 sq mm FRLHS PVC insulated unsheathed stranded copper conductor as earth lead and connected to common earth doly for one light/ceiling fan/exhaust fan controlled by one switch complete including cutting, chasing the surface and then making good the same in CM 1:3 complete all as specified and directed by Engr- in-charge. |
| 116 | All as per item No. 115 above but 3 pin 5 amps socket out let point with the same board with other switches with cables of 1.5 Sqmm size complete all as specified and directed. |
| 117 | Supply and fixed sunken flush metal GI boxes for fixing of modular switches/sockets flush to the walls complete for 3 modules complete all as specified and directed. |
| 118 | Supply and fixed modular cover plate with frame for fixing of modular switches/sockets for 3 modules complete all as specified and directed. |
| 119 | Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. |
| 120 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed. |
| 121 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers |
| 122 | Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 2 core, nominal cross sectional area of main conductor 10 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed. |
| 123 | Supply and laying DWC 50mm pipe SN8 laid in trenches for protection of cable all as specified and directed by the Engr-in-Charge. |
| 124 | Materials and labour for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.00 mm thick burried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised earth lead wire 4.0mm dia as earthing lead by means of bolts, nuts, check nuts and washers of GI or steel, GI strip proected by 40 mm bore light grade GI pipe and other end connected to earth test point as directed including funnel with watering pipe 20 mm bore light grade galvanised iron, wire mesh, charcoal or coke common salt laid in alternative layer of 15 cm (complete thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1, 50 mm thick pre-cast RCC (1:2:4) type B-1 normal mix cover slab reinforced with 8 mm dia TMT bar 10 cm c/c bothways and single handle of 10 mm dia round bar including necessary excavation, earth work etc. in soft / loose soil and disposal pf soil to a distance n. exc. 50 m and necessary testing on completion all as shown in electrical plate No. 3 MES Schedule Part-I complete all as specified and as directed. |
| 125 | Supply installation and commissioning metal top 500 Litre deep freezer, single phase, 240 V, 50 Hz 5 star rated, temp range for freezer mode at -18 to -22 degree C and 2 degree to 8 degree C complete all as specified and as directed. Voltas/BlueStar/Godrej |
| 126 | Supply and Install voltage stabilizer suitable for deep freezer upto 600 litre with working range 170V- 230V, AC, 6A capacity with under volt and overload protextion automatic cut off relay complete all as specified and as directed. |
| 127 | Supply, installation, commis-sioning of Water cooler partially stainless steel, electric driven single phase having approx storage and nominal cooling capacity 20/20ltrs |
| 128 | Supply, installation, commissioning of 205 ltrs Metal Top Deep Freezer single phase 240 volt, 50 Hz |
| 129 | Material and Labour for surface Casing and Capping point wiring with 2.5 sqmm nominal cross sectional area, single core, 1100 Volts FRLS grade, stranded, PVC insulated, unsheathed copper conductor cable drawn through Casing and Capping of suitable size, complete with all accessories/ fittings, tees , L- bends , brass screws, washers etc, PVC boxes to accomodate switches including PVC insulated copper earth continuity conductor 2.5 Sqmm cable connected to common earth dolly including boxes for housing the switches, sockets regulators etc with plates all as specified and directed for for 3 pin 15A socket multipurpose on independent board complete all as specified and directed. |
| 130 | Supply & fixing Switch Socket outlet multipurpose 20 Amp controlled by one switch complete all as specified & directed |
| 131 | 15 mm bore tubes,medium grade galvanised, with all fitting and fixed complete to walls and ceilings |
| 132 | Supply and install hi wall split units indoor/outdoor complete with inverter compressor(100% copper wounded condenser coil), noise level 49.1(db),5 in 1 convertible cooling mode, turbo cool, comfort sleep,self diagnosis, Refrigerant gas R 32, cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2.of capacity 1.5 TR. Make :VOLTAS/BLUESTAR/ DAIKIN |
| 133 | Supply and install Voltage stabilizer for 1.5 Ton Inverter AC wall mounted with digital display with initial time delay system,high and low voltage cut off relay, micro controlled operation for smart output voltage correction, high temperature protection at working range of 170VAC-230 VAC.Make: V GUARD |
| 134 | Unplasticised PVC pipes of pressure rating 10 kgf/cm2 , 20mm dia fixed complete to walls, ceilings or in floors etc., any type of pipe |
| 135 | Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps Capacity all as specified and directed. |
| 136 | Supply and fixed sheet metal enclosure for DB's when MCBs to be used 4 way single pole and neutral double door with 200 amps rated bus bar complete including connection all as specified. |
| 137 | Supply and fixed sub main wiring two run of single core PVC insulated unsheathed stranded copper conductor of size 4 sqmm & one run of PVC insulated unsheathed stranded copper conductor of size 4 sqmm as earth lead drawing into rigid non metalic PVC conduit of size 20 mm dia including taking down old unsv. Note: Three run of 4 sqmm cable will be measured as single length. |
| 138 | Supply & Fixing XLPE insulated PVC sheathed armoured LT 1100 volt grade aluminimum conductor cable of size 20 sqmm 2 core all as specified and directed. |
| 139 | Tubes, 'light grade' galvanised,of size 40mm with all fitting and fixed complete to walls and ceilings or laid in floors all as specified and directed. Please Enable Macros to View BoQ information |
