|
| 1 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area not exc.1.5 sqm each including separating guard bars/grills/wire mesh etc., complete all as specified and as directed. |
| 2 | Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc.1.5 sqm but not exc 4sqm each including separating guard bars/grills/wire mesh etc., all as specified and as directed by the Engineer-in-Charge. |
| 3 | Taking down shutters of any description exc. 1sqm but not exc. 2 sqm and complete all as specified and as directed. |
| 4 | Taking down door shutters of any description exc. 1sqm but not exc. 2 sqm and refixing in the same opening after laying floor tiles and making necessary alterations to the size of shutters to suit with the door opening to the required height complete all as specified and as directed. |
| 5 | S&F for Second class Hard wood,plain solid straight chowkats and frames rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fitted complete all as specified and as directed. |
| 6 | S&F Solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mm x 15mm MS square tube inside the 19mm x 19mm square tube fixed to wall in repairs by drilling 100mm long MS screws using PVC fastener complete all as specified and as directed. |
| 7 | S&F for 2nd class hard wood Glazed and skeleton window shutters 35mm thick open rebated and prepared to receive glass, gauge etc, (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed. |
| 8 | S&F Factory made solid PVC moulded door shutter with particle board core 28 to 30mm thick with 2,4,6 raised panel design with 2mm thick moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in frame at site as per drawing complete all as specified and as directed. |
| 9 | S&F for 40mm thick flush door shutter, solid core construction, with block board core and plywood face panels, commerical type on both sides etc complete all as specified and as directed. |
| 10 | S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified (Thickness of powder coating not less than 50 micron) |
| 11 | S&F aluminium powder coated sliding window using three track alumimium section weighing not less than 0.900Kg per RM for frame and 0.48 Kg per RM for sliding shutters including fixed with sash bars aluminium anodised snap beads, screws and fixed alongwith same section in three sliding shutters two for fully glazed with 4 mm thick tinted glass fixed with glazing clips, and one for wiremesh shutterswith stain less stell wire cloth etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, handles, locking arrangements etc complete all as specified and directed |
| 12 | S&F Anodised aluminium grill (anodised transparent of dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/ pattern, with approved standard section and fixed to the existing window frame with CP brass/ stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed |
| 13 | S&F 4.0mm thick, figured pin head type & fixed to aluminium windows in square n exc 0.5 sq.m in each pane from Aluminium section fixed with beads/glazing clips complete all as specified and as directed. |
| 14 | S&F Aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wood/steel frames complete all as specified and as directed. |
| 15 | M&L MS work in bands, straps, supports of stays, hook and pintle hinges, clamps, hold fasts, guardbars, grills bolts etc and similar conforming to Fe-290 Gde -E -165 complete all as specified and as directed. |
| 16 | M&L for preparing wood and wood based materials treating ends of posts, backs of chowkats, etc with tar or coal tar black paint area tarred exc 0.1 sqm but n.exc 0.5 sqm each complete all as specified and directed. |
| 17 | M&L treating small articles such as hold fast etc with tar or coal tar black paint area tarred n.exc 0.1sqm each complete all as specified and as directed. |
| 18 | S&F Butt hinges, 100mm size medium weight stainless steel Etc., complete all as specified and as directed. |
| 19 | S&F aluminium anodised barrel tower bolts, extruded section of size 200mm long all as specified complete all as specified and as directed. |
| 20 | S&F extruded aluminium alloy handles fabricated type anodised 150 mm size complete all as specified and as directed. |
| 21 | S& F aluminium alloy, anodised sliding door bolts 300mm long with hasp and stable (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and as directed. |
| 22 | S & F mild steel 300 mm , ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 23 | Demolition of brick masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work and pre cast concrete articles complete all as specified and as directed. |
| 24 | M&L Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed. |
| 25 | M&L Brickwork with fly ash old size bricks, straight or curved in any radius in half brick thick walls built in CM (1:4) complete all as specified and as directed. |
| 26 | M & L for demolition of plain cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) (unreinforced) and disposal off out side defence land complete all as specified and as directed. |
| 27 | M&L PCC (1:3:6) type C1, 75mm thick using 20mm graded stone aggregate as in plinth protection and finished the surface even and smooth without using extra cement complete all as specified and as directed. |
| 28 | M&L PCC (1:4:8) type D2, 75mm thick using 40mm graded stone aggregate in subbase complete all as specified and as directed. |
| 29 | M/L sand filling under paver blocks including watering and consolidation all as specified and as directed |
| 30 | M&L Machine pressed precast concrete interlocking paver block 60mm with Grey cement and pigment any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade all as specified and directed |
| 31 | S&F for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry in floors Pattern, size and shade pointed with grey cement and pigment all as specified and as directed |
| 32 | M/L Screed bed or bedding layer of mortar 15mm thk for laying floor finish in CM 1:6 complete all as specified and as directed |
| 33 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to walls including taking down old one complete all as specified and as directed |
| 34 | S&F (SWR) Bends of any radiusof 110 mm bore of pipe with oval access door complete all as specified and as directed |
| 35 | M & L two coat of synthetic enamel paint over one coat of red oxide primer on new steel surfaces, surfaces of any description , over 10cm width or girth not other wise described complete all as specified and as directed |
| 36 | Taking down cement plaster on brick work or stone walls etc including racking out of joint , hacking for key scrubbing down with water etc complete all as specified and as directed |
| 37 | M&L Rendering 15mm thick in CM 1:6 on fair face of brick work suraces finished even and smooth without using extra cement complete all as specified and as directed |
| 38 | Material and labour for applying two or more coats of 100% premium acrylic mulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete including preparation of newly plastered surfaces of walls all as specified and as directed by the Engineer-in-Charge.Make : APEX of Asian or equivalent of shalimar / Nerolac/ Berger. |
| 39 | M & L for applying two coat of synthetic enamel paint over a coat of pink primer including preparation of new wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed. |
| 40 | M & L for applying one coat of synthetic enamelled paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed. |
| 41 | S&F 20mm dia mild steel CP curtain rod with brackets, stops rollers etc fixed in repairs complete all as specified and as directed |
| 42 | M&L Granite (of any type) slab 20mm thick machine cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and moulding the edge ,hole for gas pipe and polishing complete as in cooking platform including Screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:4 all as directed |
| 43 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed |
| 44 | Dismantling Plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof coverings complete all as specified and directed |
| 45 | Excavation in post holes in Soft/ Loose soil (or similar holes) each n. exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm complete all as specified and directed by Engineer in Charge. |
| 46 | S&F for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St 240 complete all as specified and directed |
| 47 | S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified and directed |
| 48 | S&F Plain, galvanised, mild steel sheeting 0.63mm thick, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed |
| 49 | S&F for Framed work as in doors or gates of angle or other section Fe 410 -W (Gde- E- 250) quality- AFe with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as speicifed and directed |
| 50 | S&F for Framed brackets of angles or tees with web and flanges cut toshape, drilled and countersunk for screw, including bending andwelding angles, as necessary, gusset plates, riveting, etc.. n exc10 kg each brackets, conforming to Fe.290.Gde-E-165 (Bracketsover 10 kg each to be measured under 'Structural Steel')all as specified and as directed |
| 51 | M&L for point wiring of size 1.5 sqmm with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through new non metallic rigid PVC conduit including accessories, concealed in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., incl provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- (a) one light point controlled by one switch |
| 52 | (b) one fan point controlled by one switch |
| 53 | ( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 54 | (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 55 | (e) one bell/buzzer point controlled by one bell push |
| 56 | As per above item No.51 for one socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size complete all as specified and directed. |
| 57 | M&L for point wiring of size 1.5 sqmm (two run) with PVC insulated unsheathed multistranded copper conductor cable of 1100V grade drawn through non metallic rigid Existing PVC conduit , in wall/floor and fixed on ceiling/roof etc, including pressed steel terminal boxes concealed in walls for housing modular switches,sockets, fan regulators etc., including provn of 1.5 sqmm PVC insulated copper earth conductor cable for earth continuity and connecting to common earth dolly including taking down carefully copper/aluminium point wiring light, fan, socket or power complete with fittings such as switches, ceiling roses, regulators sockets etc and making good disturbed surfaces of walls, floors to match with the existing surface complete all as specified and as directed for :- (a) one light point controlled by one switch |
| 58 | (b) one fan point controlled by one switch |
| 59 | ( c) one 3 pin socket outlet 5 amps on the same board controlled by one switch. |
| 60 | (d) one 3 pin socket outlet 5 amps on independent board controlled by one switch. |
| 61 | S& F for modular cover plate with frame 3 module complete all as specified and directed. |
| 62 | S& F for modular cover plate with frame 4 module complete all as specified and directed. |
| 63 | S& F for modular cover plate with frame 6 module complete all as specified and directed. |
| 64 | S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed. |
| 65 | S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed. |
| 66 | S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed. |
| 67 | S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed. |
| 68 | S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed. |
| 69 | S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed. |
| 70 | S& F ceiling fan 230v,1200 mm sweep, five star rating with brushless conductor motor complete with blades, down rods, electronic regulator and accessories complete including taking down ceiling fan and removing blades and fan body and depositing in store including connecting rod, cotter pins and all accessories completeall as specified and as directed. |
| 71 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m, 5 star complete all as specified and directed |
| 72 | S & F 20 Watts LED COOL LIGHT fitting, surface mounting general purpose LED Battens in Extruded Aluminum housing with wide range of wattages to suite variety of application areas, complete including taking down all as specified and directed by the Engr-in-Charge. Make : Havells Cat No. LUMILINEPLUSNEOBS20WLED865SPCSSIND or techno commercial equivalent Philips/Bajaj. Please Enable Macros to View BoQ information |
