|
| 1 | Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in-charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) |
| 2 | Dismantling of C.C. interlocking tiles including stacking of old bricks. |
| 3 | Disposal of waste malba from site upto 5.0 km i/c all comp of work Quntity same as per above item For disposal take 90 % of total quntity |
| 4 | Concrete with 4 cm gauge brick ballast fine sand and cement in proportion are 1:6:12 in foundation and under floors, including supply of all materials, labour. T&P etc. required for proper completion the work [SIN No-273] |
| 5 | R.C.C. Work with cement, approved coarse sand & 2 cm gauge approved stone grit in proportions of 1:1.5:3 in (Column and T-Beam) with all comp of work |
| 6 | M.S. (for steel or plain) in Plain work such as R.C.C. or R.B. work including bending for proper shape and including supply of steel & its wastage, bend, hooks, and authorised overlapping shall be measured and including cost of binding wire. Quntity same as per above item |
| 7 | M-150 Brick work in 1:4 one cement and four course sand, mortar in foundation in plinth including suopply of all material labour, T &P etc. required for proper completion of the work. |
| 8 | Cement Concrete with 2 cm gauge approved graded stoneee grit, coarse sand and cement in the proportion of 4:2:1, including supply of all materials, labour, tools & plants etc required for proper completion of the work As per direction of E/I. Ramp |
| 9 | 12 mm thick plaster with cement and approved fine sand mortar in 1:4 over brick work minium thickness not to be less than 1 Cm including supply of all material labour Tool & Plants etc. required for proper completion of the work. |
| 10 | Supply and fixing Galvanized corrugated iron roofing 24 B.W.G. in position including supply of all materials, labour, Tools & plants etc. required for proper completion of the work and including wastage. |
| 11 | Supply and fixing 22 B.W.G. Ridges, valley and gutters for iron roofing fixed with J or U bolts 10mm (3/8\\") dia-with G.I. Limpet and bitumen washers complete including supply of all materials, labour, tools & plantsetc. required for proper completion of the work and including wastage . |
| 12 | Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately) Hollow section 1500x1500x5 Hollow section |
| 13 | Painting or varnishing work in small areas or new wood work with one coat (upto one square metre of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. Paint to be used ISI marked. |
| 14 | Supply and fixing of 10cm. (4\\") internal dia PVC down pipe.(kissan/suprime make) complete with bends with door at top and plain at bottom and grantings and including supply of necessary M.S. clamp 2.5cm x 3 mm. (1\\" x1/8\\") fixed to walls with cement motar (1:2) and including supply of 15 cm (6\\") long 6mm. (1/4\\") dia nail all materials, labour and T& P. etc. required for proper completion of the work and also including repair of plaster pointing etc. if damaged during fixing of the pipes. |
| 15 | Construction of Granular sub- base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in lace method with rotavator of OMC, and compacting with vibratory power roller to achive the desired density, complete (As per clause 401 RA) |
| 16 | Relaying of 80 mm thick I shaped interlocking cement concrete paver blocks including cost of all material labour T& P etc required for proper complition of work. |
| 17 | Providing and laying of interlocking concrete Block pavement having thickness 80 mm as per drawings and technical specification Clause 1504. |
| 18 | Add 18%GST Please Enable Macros to View BoQ information |
