|
| 1 | PA-IN-PEP-OW W P: Painting old walls two coat with ready mixed plastic emulsion paint of first class quality paint of approved colour and shade including thorough scrapping |
| 2 | PA-Ex-EEP-OW W P:Painting old walls two coats with Exterior emulsion paint of first class quality paint of approved colour and shade including thorough scrapping |
| 3 | PA-Ex-OIP-2C EP:Painting the old Iron work and other similar works such as PVC / ASTM Pipes, Kerb Stone and grills with two coats of approved first class synthetic enamel ready mixed paint of approved quality and brand over the through scrapped surface including scrapping the existing surface |
| 4 | PA-IN-OWP-2C EP:Painting the old wood work with two coats of approved Ist class synthetic enamel paint including thorough scrapping the old paint |
| 5 | DM-R-PT-OC:Dismantling the One Course of Pressed Tile Roof finish in cement mortar including all tools and plants required etc |
| 6 | DW-DMB-PCCDismantling the damaged cement concrete flooring C.C 1:5:10 (one of cement, five of sand, and ten of hard broken stone jelly) without affecting the adjacent structures, |
| 7 | Clean removal of the old cement plastering both inside and outside from the existing walls of brick masonry without damaging the existing structure |
| 8 | DW-B/S-CMW-U3:Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Brick / Stone Masonry in cement mortar walls under 3m high |
| 9 | Acrylic anti-carbonation coating for New Concrete (Bridges & Flyover) Providing and Applying Acrylic anti-carbonation coating on concrete surface, which is single component, cold applied, water based acrylic polymer and Specially formulated to Protect RCC substrate that is directly exposed to atmospheric conditions like UV radiation, heavy rain, industrial pollution & carbonation |
| 10 | PL-OU-CM 1:5-12mm:Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick |
| 11 | TL-WL-GZT-CM 1:2:Supplying and fixing of Colour glazed tiles (Best approved quality and the same shall be got approved from the Executive Engineer before using) over cement plastering in CM 1:2 (One of cement and two of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 10mm thick |
| 12 | TL-FL-CT-CM 1:3:Supplying and fixing of colour Ceramic Tiles Anti skid without corrugated design for flooring and other similar works (Best approved quality, colour and shade shall be got approved from the Executive Engineer before using) over cement mortor 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 20mm thick |
| 13 | TL-RO-PT-CM 1:3:Finishing top of roof with one course of Pressed Tiles of approved superior quality of size 23cmx 23cmx20mm thick laid over weathering course in CM 1:3 (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag,) 12mm thick |
| 14 | WS-EX-ASTM-PVCSupplying, laying, fixing and jointing the following PVC pipes as per ASTM D - 1785 of suitable schedule (40/60/80) of wall thickness not less than the specified in IS 4985 suitable for plumbing by threading of wall thicknessWS-EX-ASTM-32 PVCa) 32mm dia |
| 15 | WS-EX-ASTM-25 PVC:b) 25mm dia |
| 16 | WS-EX-RWD-PVC:Supplying and fixing of following dia PVC SWR pipe with ISI mark conforming to IS 13952:1992- type `A` for Rain water down fall pipe.WS-EX-RWD-PVC 110:b. 110mm dia PVC SWR pipe |
| 17 | SA-Ex-SWR P-Dia:Supplying and fixing the following dia PVC (SWR) pipe with ISI mark confirming to IS 13952:1992- type `B` for soil line with relevant specials confirming to IS 14735 SA-Ex-SWR P-110:a) 110mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 18 | SA-Ex-SWR P-75:b) 75mm dia PVC SWR pipe including all required PVC specials etc., all complete., |
| 19 | SA-Ex-SWR P-50:Supplying,laying and concealing the 50mm dia PVC (SWR) pipe with ISI mark conforming to IS 13952:1992- type `B` for waste water line with relevant specials conforming to IS 14735 |
| 20 | SA-IN-NT-PVC:Supplying and fixing of PVC Nahani Trap not less than 75mm 4 way / 2 way (Superior variety) |
| 21 | SA-IN-WB-PSupplying and fixing of following porcelin wash hand basin , superior variety of size 550x400mm with all accessories SA-IN-WB-WWOPb).White without pedastal wash hand basin |
| 22 | WS-IN-HCP-LBT:Supplying and fixing of 15mm dia half turn C.P Tap (Long body Tap) of Best quality |
| 23 | WS-IN-HCP-SBT:Supplying and fixing of 15mm dia half turn C.P Tap (Short body Tap) of Best quality |
| 24 | SA-IN-IWC-GF:Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap, Mortar Plasticizer (Liquid) at 200ml per bag, In Ground floor. |
| 25 | SA-IN-IWC-OGF:Supplying and fixing of Indian Water Closet white glazed (oriya type) of size 580 mm x 440 mm of approved make with ISI mark (to be got approved from EE before use) with PVC SWR grade 'P' or 'S' trap, Mortar Plasticizer (Liquid) at 200ml In Other than ground floor |
| 26 | SA-IN-EWC-W:Supplying and fixing EWC superior variety (white) 500mm with PVC SWR grade `P` or `S` trap |
| 27 | SA-Ex-SN8-Dia: Supplying, laying and jointing the following dia UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003,SA-Ex-SN8-110:a. 110 mm UPVC Non Pressure pipe |
| 28 | SA-Ex-SN8-160:b. 160 mm UPVC Non Pressure pipe |
| 29 | EL-IN-OEP-OLPWirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable with surface run by means of 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable confirming to IS 694 / 1980 with ISI mark (Open wiring)EL-IN-OEP-WCRa. Light point with ceiling rose |
| 30 | EL-IN-OEP-WOCRb. Light point without ceiling rose |
| 31 | EL-IN-OEP-SLP:Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for Stair case light point (Open wiring) |
| 32 | EL-IN-EP-SBI:Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990, 1.1 K.v. grade cable for 5 amps. 5 pin plug socket point at Switch Board Itself |
| 33 | EL-IN-EP-PS:Supplying and fixing 15 amps 3 pin plug type socket |
| 34 | EL-IN-OEP-CP:Wirng with 1.5 sqmm copper PVC insulated unsheathed single core 1.1 KV grade cable for 5 amps. 5 pin plug socket point at convenient places (Open wiring) |
| 35 | EL-IN-EF-AC:Charges for assembling and fixing of ceiling fan of different sweep with necessary connections and fixing of fan regulator on the existing board etc |
| 36 | EL-IN-EF-F:Supply and delivery of following Electric Ceiling fan with ISI mark EL-IN-EF-48\\"Fa) 48\\" Electric fan 1200mm sweep |
| 37 | EL-IN-OWR-2x2.5m2:Run of main with 2 wires of 2.5 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable [Open wrining] |
| 38 | EL-IN-OWR-2x4m2:Run of main with 2 wires of 4 sq.mm. PVC insulated single core multi strand fire retardant flexible copper cablewith ISI mark conforming to IS: 694/1990,1.1 kv grade cable (Open wiring) |
| 39 | EL-IN-EF-EF:Supplying and fixing of following dia sweep AC exhaust fan of approved ISI Quality EL-IN-EF-EF300:b) 300 mm dia sweep AC exhaust fan |
| 40 | EL-IN-EF-9W:Supplying & fixing of LED bulbs suitable for fixing it to pendent / bakelite battern holder of best approved variety etc.,a) 9 watts LED bulb |
| 41 | EL-IN-LED.F-TL:Supply and fixing of 4' long 18 W Crystal Glass LED tube Light with ISI mark |
| 42 | EL-IN-EF-12W:Supplying & fixing of LED bulbs suitable for fixing best approved variety b) 12 watts LED bulb |
| 43 | EL-EX-EF- SL-25W:Supplying and fixing of 25 Watts LED lamp with street light fittings arrangements using 25mm dia GI \\"B\\" Class pipe for 1.50m length including cost of all materials, labour charges for fixing of LED street light fitting in EB pole/wall etc |
| 44 | Supply and fixing of Concealed stop/ Angle cock with ISI mark |
| 45 | SA-IN-CP-2WBCSupply and fixing of Health faucet with ISI mark of best approved quality |
| 46 | PL-WPC-CM 1:3-12mmPlastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2% by weight of cement |
| 47 | Providing and filling the tile joint with epoxy grout with following specification: Surface preparation including cleaning the joint to be free from dust and loose particles. Providing masking tape on either side of the tile joint edges and providing sealing the tile gap with epoxy tile joint grout and finishing neatly |
| 48 | Supplying, fabricating, erecting and fixing of following Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level a) Using Calcium Silicate Board Plain Sheets (10mm thick) |
| 49 | Supplying and fixing of GI Hot Dip / Powder Coated 16 SWG Cable Tray with 300mm width and 50mm height CABLE TRAY |
| 50 | Repolishing the mosaic flooring including polishing stone and hire charges for polishing machine but ex- cluding cost of electrical charges etc. |
| 51 | MW-HR-SS-SHManufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete Please Enable Macros to View BoQ information |
