|
| 1 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metreslead : |
| 3 | Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm |
| 6 | Centering and shuttering including strutting, propping Suspended floors, roofs, landings, balconies and access platform |
| 7 | Edges of slabs and breaks in floors and walls under 20cm wide |
| 8 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:1.5:3 (1 cement :1.5 coarse sand) : 3graded stone aggregate 20 mm nominal size) |
| 9 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars |
| 10 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:3:6(1 cement : 3 coarse sand) : 6 graded stone aggregate 20 mm nominal size) |
| 12 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Per Square meter including grouting the joints with white cement and matching pigments etc., 600 x 600mm |
| 13 | Providing and laying double digital Vitrified tiles in different sizes(thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Per Square meter including grouting the joint with white cement & matching pigments etc. complete 1200x600 mm |
| 14 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. |
| 15 | 15mm cement plaster in single coat on rough side of brick/concrete /stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in Cement mortar 1:6 (1 cement : 6 sand) including carriage of materials within all leads and lifts |
| 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 17 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.15 mm dia nominal bore |
| 18 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :15 mm nominal bore |
| 19 | P/F PVC p trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete a) 110 mm |
| 20 | Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete a) 110mm dia.type b |
| 21 | 75mm dia complete including carriage of material within all leads and lifts |
| 22 | Providing and fixing PVC single equal branch plain ISI marked etc complete including carriage of material within all leads and lifts 110 mm dia |
| 23 | Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc complete including carriage of material within all leads and lifts. 110 mm dia |
| 24 | Providing and fixing PVC door bend ISI marked including fixing with approved adhesive etc complete including carriage of material within all leads and lifts. 110 mm dia |
| 25 | Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc complete including carriage of material within all leads and lifts 110 mm dia |
| 26 | Providing and fixing PVC degree bend ISI marked including fixing with approved adhesive etc complete including carriage of material within all leads and lifts 110 mm dia |
| 27 | Providing and fixing gate valve complete including carriage of material within all leads and lifts 15mm nominal size |
| 28 | Providing and fixing water closet squatting pan (Indian suitable for use as squatting pan or European type water closet jaguar make VGS-WHT-81853P180UF Rimless Single piece-WC with UF soft close seat cover, Hinges, Fixing Accessories, Accessories Set andCistern fittings, Size: 395x710x730 mm, P Trap -180 mm |
| 29 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste ofstandard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm Jaguar make cat no CNS-WHT-705 |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. JAGUAR MAKE |
| 31 | Providing and fixing central hole mixer of quality & make as approved by Engineer in charge. Of 15mm nominal size JAGUAR MAKE CAT NO KVP-CHR-35011 BPM |
| 32 | Providing and fixing ESS ESS stop cock of approved colour and quality complete including carriage of material within all leads and lifts JAGUAR MAKE CAT NO KVP-CHR-35053PM |
| 33 | Providing and fixing uplasticised c.p connection pipe with brass unions :15 mm nominal bore 45 cm length complete including carriage of material within all leads and lifts VIKING MAKE |
| 34 | Providing and fixing C.P. grating for floor or nahani trap with hole viking make complete including carriage of material within all leads and liftscat no 40906 |
| 35 | Providing and fixing CP waste coupling 32mm Dia for wash basin including carriage of materials within all leads and lifs JAGUAR MAKE CAT NO ALD-CHR-709 |
| 36 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets andstainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :610x510 mm bowl depth 200 in kitchenincluding carriage of materialwithin all leads and lifts.bathsense make |
| 37 | Providing and fixing kitchen sink mixer of quality & make as approved by Engineer in charge. Of 15mm nominal size complete including carriage of material within all leads and lifts JAGUAR MAKE Cat no FLR-CHR-5305N |
| 38 | Providing and fixing Polyvinyl Chloride(PVC) waste pipes 32mm Dia for wash basin or sink including carriage of materials within all leads and lifs cat no 4921 |
| 39 | Providing and fixing BIB COCK complete including carriage of material within all leads and lifts JAGUAR MAKE make Cat no kvp-chr-35037pm |
| 40 | Providing and fixing extension nipple 1'' including carriage of material withhin all leads and lifts |
| 41 | Providing and fixing bevelled mirror 600 x450 mm ofsuperior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete. |
| 42 | Providing and fixing jaguar make cat no AKP-CHR-35731P SOAP DISH complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 43 | Providing and fixing jaguar make cat no AKP-CHR-35751P TOILET PAPER HOLDER complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 44 | Providing and fixing jaguar make cat no AKP-CHR-35721P towel ring complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 45 | Providing and fixing jaguar make cat no AKP-CHR-35711P towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 46 | Providing and fixing heath faucet complete including carriage of material within all leads and liftsJAGUAR MAKE CAT NO ALD-CHR-573 |
| 47 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 48 | Providing and fixing Soap dispenser viking make |
| 49 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 50 | Providing and applying white cement based putty of average thickness 1 mm on wood and wood based surfacesof approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete including carriage of material within all leads and lifts |
| 51 | wall painting with plastic emulsion paint of premium quality of Royale Theme and including coat of primer etc. including carriage of materils within all leads and lifts |
| 52 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built upstandard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 53 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 54 | Providing and fixing ACP sheet 4mm thick in panelled and glazed door shutter and partition fixed with self drilling screws etc. complete by the Engineer-in-Charge including carriage of materials within all leads and lifts. |
| 55 | Providing and fixing aluminium sliding door bolts, ISImarked anodised (anodic coating not less than gradeAC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc.complete : 250x16 mm |
| 56 | Providing and fixing ALUMINIUM handles with screws etc. complete including carriage of material within all leads and lifts 125MM |
| 57 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. 150x10 mm complete including carriage of material within all leads and lifts |
| 58 | Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete) |
| 59 | Providing and fixing 19mm thick Commercial Board water proof shutters for up boards i/c fixing with nickel plated piano hinges with screws etc complete including carriage of material within all leads and lifts |
| 60 | Providing and fixing 1.00 mm thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete including carriage of materials within all leads and lifts. |
| 61 | Providing and fixing 9 mm thick plywood linning in flooring/linning of standard quality ISI mark and approved shade and colour in panelling & wall linning i/c mitring at junctions, butt jointing and nails complete (Frame work for base to be measured & paid for separately) |
| 62 | providing and fixing cement asbestos sheet of superior quality including carriage of material within all leads and lifts |
| 63 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Triple strip vertical type |
| 64 | Providing and fixing Brass handles with screws etc. complete including carriage of material within all leads and lifts: 150MM |
| 65 | Providing and fixing 4mm thick teak ply of superior quality and make including carriage of material within all leads and lifts |
| 66 | Polishing with PU polish of required shade on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth and including a coat of wood filler.two or more coats. |
| 67 | Providing and laying 1.5 mm thick pvc/rubber tiles flooring (L.G. Make) plain, coloured. corbed or mosaic or mattled finish, laid with approved adhesive on sub floor damp proofing treetment(to be measured separately)for payment including carriage of materials within all leads and lifts. |
| 68 | Providing and fixing HDF Decorative lamimnate core board flooring AC 4 Class 32,8 mm thick of kemo original or equivalent placed over cushion of 2 mm thick expended polethene foam olus 100 micronthick polethene sheet underlay 045 beech west including border of required shade and colour complete in all respects as desired by Engineer in Charge. Please Enable Macros to View BoQ information |
