|
| 1 | Scraping White wash and colour wash |
| 2 | Cement Scraping |
| 3 | 12.5mm thick cement plaster 1:4 |
| 4 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 5 | White washing (Two or more coat) |
| 6 | Wall painting with plastic emulsion paint of approved brand and manufacture to given an even shade (two or more coat) |
| 7 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 8 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 9 | Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing downold paint. |
| 10 | Marble work of thickness 18-20 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing with white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately).Udaipur Green Marble Tiles of thickness 15mm to 20mm size above .50 sqm |
| 11 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-In- Charge. (Glazing and paneling to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required |
| 12 | Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in paneling fixed in aluminum doors, windows shutters and partition frames withC.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer-In-Charge. Pre- laminated particle board with decorative lamination on Both side. |
| 13 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete |
| 14 | Providing & fixing ACP Sheets of various thickness High Class ISI marked complete in all respect as per the directions of Engineer-in-charge.and writing matter on front signage using high intensity Microprismatic grade retro reflective sheeting type IV as per ASTM D 4956 09 and as per IRC 67 2012 |
| 15 | Construction of a 34’6” × 34’ shed with 40/70 roof panels (featuring 0.50 mm PPGI sheets on both sides and Puff Density 42 ± 2 kg/m³) and 80 mm wall panels (featuring 0.50 mm PPGI sheets on both sides and Puff Density 42 ± 2 kg/m³), attached to a mild steel structure. This includes painting, fixing a 1.5 mm thick, 915 mm wide rain gutter, and installing a 400 mm wide weldmesh on the top area of the walls. The work is to be completed in all respects to the satisfaction of the Engineer-in-Charge. |
| 16 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) |
| 17 | 17. Supplying Pressed steel sheet frames (chowkhat) consisting of 18 gauge (1.25 mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality, fixed in position excluding the cost of cement concrete 1:3:6 for fillings in the frame and cement concrete 1:2:4 for lugs complete.(c) Doors and windows frame of size 151 mm × 60 mm with 35 mm wide double rebate weighing 3.95 kg per meter. |
| 18 | 18. Factory manufactured Solid flush door fixed in position iron hinges, etc. (excluding the cost of any fittings other than specified above but including labour for fixing the same in position)(Code: IS 2209-1 (1999))Commercial with elm or gurjan facing on both sides with laminated core and lipped edges: 35 mm thick. |
| 19 | Dismantling of wall tiles at any floor of the building, laid in cement mortar including scraping of cement plaster and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. |
| 20 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in- Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. Please Enable Macros to View BoQ information |
