|
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator) infoundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, includinggetting out the excavated soil and disposal of surplus excavated soil as directed,within a lead of 50 m. All kinds of soil. |
| 2 | Filling available excavated earth (excluding rock) in trenches, plinth, sides offoundations etc. in layers not exceeding 20cm in depth, consolidating eachdeposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 3 | Dumping stone including cost of stones in Horozontal on level. |
| 4 | Providing and laying in position cement concrete of specified grade excluding thecost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 gradedstone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Random rubble masonry with hard stone in foundation and plinth includinglevelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 gradedstone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 6 | Random rubble masonry with hard stone laid dry in foundation, plinth &wallsLaid with bond stone |
| 7 | Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers,abutments, posts and struts etc. above plinth level up to floor five level,excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mmnominal size) |
| 8 | Steel reinforcement for R.C.C. work including straightening, cutting, bending,placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Providing & fixing stabilized mud concrete solid blocks (adobe) with 3% cement,masonry up to floor five level including hoisting and setting in position in cementmortar 1:6 using approved quality mud with carriage of material complete. |
| 10 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stoneaggregate) finished 50 mm thick with 20 mm nominal size stone aggregate |
| 11 | Centering and shuttering including strutting, propping etc. and removal of formwork for : Foundations, footings, bases for columns |
| 12 | Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 13 | Suspended floors, roofs, landings, balconies and access platform |
| 14 | columns, Pillars, Piers, Abutments, Posts and Struts |
| 15 | Edges of slabs and breaks in floors and wallsUnder 20 cm wide |
| 16 | Providing wood work in frames of doors, windows, clerestory windows and otherframes, wrought framed and fixed in position with hold fast lugs or with dashfasteners of required dia & length (hold fast lugs or dash fastener shall be paidfor separately).Second class Kail wood |
| 17 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I)non-decorative type, core of block board construction with frame of 1st classhard wood and well matched commercial 3 ply veneering with vertical grains orcross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessaryscrews |
| 18 | Providing and fixing factory made uPVC white colour casement/casement cumfixed glazed windowscomprising of uPVC multi-chambered frame, sash andmullion (where ever required) extruded profilesduly reinforced with 1.60 ± 0.2mm thick galvanized mild steel section made from roll forming processofrequired length (shape & size according to uPVC profile), uPVC extruded glazingbeads of appropriatedimension, EPDM gasket, stainless steel (SS 304 grade)friction hinges, zinc alloy (white powder coated)casement handles, G.I fasteners100 x 8 mm size for fixing frame to finished wall, plastic packers, plasticcaps andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cutand fusionwelded at all corners, mullion (if required) shall be also fusion weldedincluding drilling of holes for fixinghardware's and drainage of water etc. Afterfixing frame the gap between frame and adjacent finished wallshall be filled withweather proof silicon sealant over backer rod of required size and of approvedquality,all complete as per approved drawing & direction of Engineer-in-Charge.(Single / double glass panes andsilicon sealant shall be paid separately). Variationin profile dimension in higher side shall be acceptedbut no extra payment on thisaccount shall be made.For uPVC frame, sash and mullion extruded profiles minus 5% tolerance indimension i.e. in depth& width of profile shall be acceptable.uPVC profile shouldbe tested by BSI(UK) & SKZ(Germany) @25000 weathering hoursCasement cum fixed panel window having both end single casement panel,middle fixed panels and at top completely fixed ventilator with S.S friction hinges(350 x 19 x 1.9) made of (big series) frame 67 x 60 mm , sash 67 x 80 mm &mullion 67 x 80 mm all having wall thickness of 2.3 ± 0.2 mm and single glazingbead/double glazing bead of appropriate dimension. (Area of window above3.00 sqm upto 5.00 sqm). |
| 19 | Extra for brown colour wood texture weather resistance ISO certified quality |
| 20 | Providing and fixing double glass unit of 20mm thick comprises of 5mm glass 10mm spacer-5mm glass thick filled with Argon gas between the two layer of glass is further finished on the side and is ready for installation. Type of glass is toughned and 90% transparancy . |
| 21 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 22 | 6 mm cement plaster of mix : 1:3 (1 cement : 3 fine sand) |
| 23 | Providing and applying plaster of paris putty of 2 mm thickness over plasteredsurface to prepare the surface even and smooth complete. |
| 24 | Distempering with oil bound washable distemper of approved brand andmanufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coatwith cement primer |
| 25 | Providing and fixing traditionally carved wood work (Shingstak) over doors andwindows including all accessories as per the direction of the Engineer in-charge,complete with;Budloo wood |
| 26 | Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded andpre polished machine cut granite stone of required size and shape of approvedshade, colour and texture in footpath, flooring in road side plazas and similarlocations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 5 coarsesand) including grouting the joints with white cement mixed with matchingpigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. With granite stone of colour black, cherry/ruby red of area less than 0.50 sqm. |
| 27 | 12-8mm thick pre laminated wooding flooring including form required and necessary fittings all complete action tissa and the like of ISI marded |
| 28 | Providing and laying vitrified floor tiles in different sizes (thickness to be specifiedby the manufacturer) with water absorption less than 0.08% and conforming toIS: 15622, of approved make, in all colours and shades, laid on 20mm thickcement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @3.3 kg/ sqm including grouting the joints with white cement and matchingpigments etc., complete.Size of Tile 600x600 mm |
| 29 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thicknessto be specified by the manufacturer) of 1st quality conforming to IS : 15622 ofapproved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with greycement slurry @ 3.3 kg/sqm including pointing the joints with white cementand matching pigment etc., complete. |
| 30 | Providing and fixing vitreous china dual purpose closet suitable for use assquatting pan or European type water closet (Anglo Indian W.C pan) with seat &lid fixed with C.P. brass hinges and rubber buffers, 10 litre low level flushingcistern with fitting and brackets, 40 mm flush bend, 20 mm over flow pipe, withspecials of standard make and mosquito proof coupling of approved municipaldesign complete, including painting of fittings and brackets, cutting and makinggood the walls and floors wherever required:White vitreous china dual purpose WC pan with white solid plastic seat and lidwith white vitreous china flushing cistern and C.P. flush bend. |
| 31 | Providing and fixing gyser of approved make ISI marked complete job 15 ltr |
| 32 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts andscrews etc. complete :300x16 mm |
| 33 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type)with necessary screws etc. complete :150x10 mm |
| 34 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 withnecessary screws etc.complete :125 mm |
| 35 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32mm C.P. brass waste of standard pattern, including painting of fittings andbrackets, cutting and making good the walls wherever require :White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P.brass pillar taps. |
| 36 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes SDR7.4 U V stabilized & anti -microbial fusion welded, having thermal stability for hot& cold water supply including all PP - R plain & brass threaded polypropylenerandom fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includestesting of joints complete as per direction of Engineer in Charge. (Internal workexposedon wall)PN - 16 Pipe, 25mm OD (SDR-7.4) |
| 37 | Providing and fixing PVC waste pipe of required of required dia including bends, Tee door bend, L bend trap jointed with addisive material ISI marked like prince, vector or equivalent brand all complete job 90 mm dia bore. |
| 38 | Providing and fixing insualtion works of PPR pipe by way of using k flex and taping complete job. ( inner pipe) inner pipe 25mm dia |
| 39 | Providing and fixing insualtion works of PPR pipe by way of using heating wire complete job. ( denfose/ altham ) 33 watt |
| 40 | Providing and of insulation works on PVC pipe by way of using K flex, polythene, glass wool, chicken mesh and cover with aluminium foil complete job. ( outer pipe ) 19 mm thick |
| 41 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points ofapproved quality conforming to IS:8931 15 mm nominal bore |
| 42 | Providing and fixing PTMT towel rail complete with brackets fixed to woodencleats with CP brass screws with concealed fittings arrangement of approvedquality and colour.600mm long towel rail with total length of 645mm, width 78mm and effectiveheight of 88mm, weighing not less than 190gms. |
| 43 | Providing and fixing toilet paper holder : C.P. brass |
| 44 | Providing and fixing C.P. brass bib cock of approved quality conforming toIS:8931 : 15 mm nominal bore |
| 45 | Providing & fixing ball valve ( PPR ) of approved quality complete 32mm |
| 46 | Providing and fixing C.P brass hole basin mixer pillar tap of approved quality ) and quality and make , weighting not less than 1.97 kg 15mm noiminal bore of standard back type. |
| 47 | Providing and fixing mirror of superior glass of approved quality ) and of required shaped and size with frame of approved make and shade with 6mm thick hard board.Rectangular shape 453x357mm |
| 48 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 49 | Providing and fixing cp Brass Single lever telephonic wall mixer of approved make 15mm |
| 50 | Providing and placing on terrace (at all floor levels) polyethylene water storagetank ISI : 12701 marked with cover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and thebase support for tank |
| 51 | Insulation water tank/ sentex using k flex, polythene, glass wool, chicken mesh and cover with aluminium foil complete job. Complete job. |
| 52 | Structural steel work riveted, bolted or welded in built up sections, trusses andframed work, including |
| 53 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.)trusses etc., including Hot finished welded type tubes |
| 54 | Providing abd fixing health fauset with all necessary fitting complete |
| 55 | Making of modular kitchen with ply board cabinet and finishing with sunmica ply inside and out side with necessary screw and rolles and fitings all complete the kitchen should contain space for washing dissing cleaining fridge space chimney and all other requirement all complete. |
| 56 | Providing and fixing exhaust fan 12 inch size of apprived brand and manufacture all complete including making preparing surface all complete . |
| 57 | Wiring for light point/ fan point/ exhaust fan point/ call bellpoint with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable in surface / recessed steel conduit, with pianotype switch, phenolic laminated sheet, suitable size MS box andearthing the point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable etc. as required.Group A |
| 58 | Wiring for light/ power plug with 2X4 sq. mm FRLS PVCinsulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mmFRLS PVC insulated copper conductor single core cable for loopearthing as required. |
| 59 | Supplying and fixing of 45 watt LED Street light complete with GI pipe bracket duly embeded along the parapet/ wall. |
| 60 | Providing and applying acrylic waterproof paint/ coating costing for roof treatment including cost of material and labour all complete with 2 to 3 coats as desired by engineer incharge. |
| 61 | Carriage of material by mechanical means Cement lead…............................. 10 km |
| 62 | Sand + bajari …................... 20 km |
| 63 | Stone lead….......................... 20km Please Enable Macros to View BoQ information |
