Tender For Construction Of New Building(Multipurpose Block, (Src-Cum-Auditorium)(G+5), Miscellaneous Work Of J.L.N. College, Chakradharpur Under Kolhan University, Chaibasa (Part-B), Chaibasa-Jharkhand

TDR : 55797153

Tender Notice
BOQ

24 Days Left

Chaibasa , Jharkhand

Tender Brief : Tender For Construction Of New Building(Multipurpose Block, (Src-Cum-Auditorium)(G+5), Miscellaneous Work Of J.L.N. College, Chakradharpur Under Kolhan University, Chaibasa (Part-B)

Document Fees
₹ 10000 /-

EMD
₹ 1685000.0 /-

Tender Value
Refer document

Submission Date
29-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.
2	EARTH WORK IN EXCAVATION IN FOUNDATION Trenches in ordinary soil (vide classification of soil item -A) and disposal of excavated earth as obtained to a distance upto 50 M including all lift, leveling ramming the foundation trenches, removing roots of tree shrubs all complete as per approved design, building specification and direction of E/I.
3	FILLING IN FOUNDATION TRENCHES AND PLINTH in layers not exceeding 150 mm thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation foundation trenches within a lead of 50 M and lift of 1.5 M all complete as per building specification and direction of E/I. (mode of measurement compacted volume)
4	IN FOUNDATION TRENCHES + FILLING IN BUILDING TO RAISE G.L.+ IN PLINTH
5	Providing coarse clean local SAND IN FILLING in foundation trenches or in plinth including ramming and watering in layer not exceeding 150 mm thick with all leads and 1.5 M lifts including cost of all materials, labours, royalty and taxes all complete as per building specification and direction of Engineer Incharge (Mode of measurement compacted volume)
6	Providing designation 75-A, BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge
7	Providing designation 75-B, one BRICK FLAT SOLING joints filled with local sand including cost of watering,taxes and royalty all complete as per building specification and direction of Engineer Incharge
8	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
9	1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size)
10	Providing and filling BRICK BATS in toilet sunken slab after waterproofing treatment of slab and beam sides including all taxes all complete.
11	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(SLAB)
12	Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).(LINTEL)
13	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
14	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (FOUNDATION)
15	All work up to plinth level :
16	Concrete of M25 grade with minimum cement content of 330 kg /cum
17	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
18	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (COLUMN)
19	All work above plinth level :
20	Concrete of M25 grade with minimum cement content of 330 kg /cum
21	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
22	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (BEAM)
23	All work above plinth level :
24	Concrete of M25 grade with minimum cement content of 330 kg /cum
25	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
26	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (SLAB)
27	All work above plinth level :
28	Concrete of M25 grade with minimum cement content of 330 kg /cum
29	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
30	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (LINTEL BAND)
31	All work above plinth level :
32	Concrete of M25 grade with minimum cement content of 330 kg /cum
33	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
34	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (LINTEL)
35	All work above plinth level :
36	Concrete of M25 grade with minimum cement content of 330 kg /cum
37	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
38	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (STAIRS)
39	All work above plinth level :
40	Concrete of M25 grade with minimum cement content of 330 kg /cum
41	Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
42	Note - Extra cement upto 10% of the minimum specified cement content in design mix shall be paid separately. In case the cement content in design mix is more than 1.10 of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. (CHAJJA)
43	All work above plinth level :
44	Concrete of M25 grade with minimum cement content of 330 kg /cum
45	Providing, hosting and fixing above plinth level up to floor level precast Reinforced cement concrete in shelves, including setting in cement mortar 1:3 (1cement : 3 coarse sand ), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but , exculuding the cost of reinforcement, with 1:1.5:3 (1cement : 1.5 coarse sand (zone-iii) : 3 graded stone aggregate 20mm nominal size)
46	Extra for R.C.C./B.M.C./R.M.C. work above floor V level for each four floors or part thereof
47	Add for using extra cement in the items of design mix over and above the specified cement content therein.
48	Centering and shuttering including struting, propping etc. and removal of form for -
49	Foundation, footings, bases of columns etc.
50	Columns
51	ROOF SLAB
52	Beams, plinth beams,-
53	STAIRS -
54	CHAJJA
55	Extra for Arches
56	Edges of slabs and breaks in floors and walls
57	Under 20 cm wide
58	Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (plan area to be measured)
59	Suspended floors, roofs, landing, beams and balconies (plan area to be measured)
60	Providing tor steel reinforcement TMT FE 500 of following dia. rods as per approved design and drawing including carriage of bars to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction and direction of E/I. (ONLY VALID FOR SAIL & TATA STEEL, JSPL, ELECTRO STEEL LTD. AND VIZAG STEEL)
61	TOR 8 MMDIA. @ 30% of total steel qty.
62	TOR 10 MMDIA. @ 15% of total steel qty.
63	TOR 12 -25 MM DIA. @ 55% of total steel qty.
64	TOR 28 -32 MM DIA.
65	Providing designation 75A brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.
66	Providing designation 75B brick work in C.M. (1:6) in foundation & plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm. thick mortar joints,cost of screening materials raking out joints to 15mm depth , curing, taxes & royalty all complete as per building specification & direction of E/I.
67	Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20mm nominal size)
68	Extra for providing and mixing waterproofing material in cement conncrete work in doses by weight of cement as per manufacturer's specification.
69	Providing designation 75 A BRICK WORK in CM. (1:6) in SUPERSTRUCTURE with approved quality of clean coarse & of F.M. 2.5 including providing 10mm thick mortar joints cost of screening,racking out joints to 15 mm depth,curing, taxes and royalty all complete as per building specification and direction of Engineer Incharge
70	Providing and laying autoclaved aerated cement blocks masonry with 150mm/230mm/300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
71	Extra for brick work/ AAC block masonry / Tile brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means.
72	Providing 12 mm Thk. cement plaster(1:6) on inside walls with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I
73	Providing 6mm cement plaster(1:4) in ceiling with clean course sand of FM-1.5 including screening, curing with all leads & lifts of water, scaffolding taxes & royalty all complete as per building specification and direction of E/I
74	Providing 12 mm thick water proof CEMENT PLASTER (1:6) on outside wall with clean coarse sand of F.M.1.5 and waterproofing compound (as per specified and approved) including cost of screening, curing making grooves with all leads and lifts of water, scaffolding, taxes and royalty all complete as per building specification and direction of E/I. (Cost of waterproofing compound will be paid separately)
75	Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.
76	Providing & fixing FAN HOOK of 16 mm dia M.S. bar, 1 M long bent to required size and shape, placed in position and fluid in the R.C.C. slab-beam at the time of casting all complete as per building specification and direction of E/I.
77	Supplying, fitting & fixing 250 x 20 x 6 mm L-type M.S. clamp properly fishtailed including making holes and setting the same in 375 x 125 x 75 mm cement concrete block (1:2:4) with cost of all layout and materials and taxes as per building specification and direction of E/I.
78	Making 6x6 / 20x6 mm grooves in plaster surface over walls trully horizontal or vertical as specified at regular intervals at all heights including cleaning finishing , scaffolding and curing with all leads and lifts of water all complete as per buildinng specification and direction of E/I. (6
79	Extra for brick work for each consecutive floor above first floor including watering and scaffolding, all complete as per direction of E/I.
80	Second Floor
81	Third Floor
82	Fourth Floor
83	Extra for PLASTER work over exterior surface for each consecutive floor above first floor including cost of scaffolding etc. all complete as per direction of E/I.
84	Second Floor
85	Third Floor
86	Fourth Floor
87	Fifth Floor
88	FLOORING WORKS
89	Providing and laying DOUBLE CHARGE VITRIFIED FLOOR TILES in different sizes (thickness to be specified by manufacturer) with water absorption less than 0.08% and confirming to IS : 15622/ ISO 13006, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.30 kg per sqm including grouting the joints with white cement and matching pigments etc. complete.
90	Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
91	Providing and laying 6 mm precast white GLAZED CERAMIC TILES in walls over 12mm cement mortar (1:3) and jointed with white cement slurry flush pointed with white cement including rubbing, polishing and cost of curing taxes, and royalty all complete as per building specification and direction of E/I
92	with commercial grade colour tiles.
93	Marble stone flooring with 18 mm th marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm thick base of cement mortar 1:4 (1cement :4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with:
94	Udaipur Green Marble
95	Extra for pre finished nosing to treads of steps of marble stone
96	Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 m
97	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels
98	Granite stone slab colour black, Cherry/Ruby red
99	Area of slab over 0.5 sqm -
100	Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
101	Providing 50mm thick Cement Concrete Flooring ( 1:2:4 ) with 20mm to 6mm size graded stone chips finished with floating coat of neat cement in panels, including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty all complete as per building specification and direction of E/I.
102	Providing 12mm cement plaster(1:3) with clean course sand of F.M 1.5 with floating coat of neat cement in skirting including rounding of junctions with floor, curing taxes and royalty all complete as per building specification and direction of E/I.
103	38 mm thick wood block flooring of first class teak wood laid over 25 mm thick leveling layer of cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm nominal size) to be paid separately, coated with a thin layer of hot bitumen penetration 80/25 (blown type) @ 2.45 kg per sqm, including fixing blocks in position after dipping in hot bitumen (blown type) up to half depth, planed, levelled smooth and finished complete.
104	Providing and laying vitrified Parking/Industrial tile in different sizes (thickness to be speified by the manufacture) with water absorption less than 0.08% and confirming to IS:4457:2007, of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg./ sqm.including grouting the joints with white cement and matching pigments etc. complete size of tile 300x300x10mm sizes all complete as per building specification and direction of E/I.
105	Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50 cm deep and1.8 cm thick fixed in Urinal Partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement :2 coarse sand : 4 stone chips)as per direction of E/I and finished smooth.
106	Granite Stone of approved shade
107	Extra for FLOORING work for each consecutive floor above first floor, all complete as per direction of E/I.
108	Second Floor
109	Third Floor
110	Fourth Floor
111	DOORS & WINDOWS WORKS
112	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
113	Frame size 50 x 100 mm
114	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
115	25 mm thick
116	suppling , fitting and fixing good quality well dressed and well seasoned sal wood work in chaukhat in doors window ,sky light, fanlight and celevitial window opening including wedge over clmps all including application of two coats of wood preservative of approved quality on the surface , building walls and lintel all complete as per building specification and direction of El.
117	Supplying, fitting & fixing 35 mm th. Solid core type non-decorative single leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.
118	Supplying, fitting & fixing 35 mm th. Solid core type non-decorative double leaf FLUSH DOOR SHUTTERS in doors with block board core blended with high quality phenol formal dehydes synthetic resinboth side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts , handle,cleats aldrop, door stopper & sand blocks & taxes all complete as per detail drawing building specification & direction of the E/I.
119	Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-incharge (Frame work shall be paid for separately).
120	12mm thick commercial ply conforming to IS : 1328 BWR type
121	Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
122	1.0 mm thick
123	Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured):
124	Rectangular or square
125	Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i. e. at top, bottom and sides with required EPDM rubber / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
126	For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
127	Powder coated aluminium (minimum thickness of powder coating 50 micron)
128	Providing and fixing glazing in aluminium window, ventilator shutters etc. with EPDM / Neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
129	With float glass panes of 4.0 mm thickness
130	Providing and fixing glazing in aluminium door, shutters etc. with PVC/neoprene gasket etc complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item):
131	With float glass panes of 5.0 mm thickness
132	Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
133	Pre-laminated particle board with decorative lamination on both sides
134	Providing and fixing Double action hydraulic floor spring of approved brand and manufacture I.S.:6315 marked, Hardwyn Make (Model 3000) or equivalent for doors including cost of cutting floors as required, embedding in floors & cover plates with brass pivot and single piece M.S. sheet outer box with side plate etc.complete as per the direction of E/I. WITH STAINLESS STEEL COVER PLATE MINIMUM 1.25MM THICKNESS:-
135	DOOR WINDOW
136	Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
137	Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. (Approved brand - Godrej/ Dorset)
138	Providing and fixing aluminium round shape handle of outer dia.100 mm with SS screws etc. coplete as per direction of E/I.
139	Powder coated minimum thickness 50 micron aluminium.
140	Providing and fixing aluminium hanging floor door stoppers ISI marked anodized (anodic coating not less than grade Ac 10 as per I.S. 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. Twin rubber stopper
141	Providing and fixing aluminium TOWER BOLTS ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required color or shade with necessary screws etc. complete.
142	300X 10MM
143	150X 10MM
144	Extra for providing lipping with 2nd class teak wood battens 25mm minimum depth on all edges of shutters (over all area of door shutter to be measured).
145	Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment.
146	Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:
147	a) Structural analysis & design and preparation of shop drawings for the specified design loads conforming to IS 875 part III (the system must passed the proof test at 1.5 times design wind pressure without any failure), including functional design of the aluminum sections for fixing glazing panels of various thicknesses, aluminium cleats, sleeves and splice plates etc. gaskets, screws, toggles, nuts, bolts, clamps etc., structural and weather silicone sealants, flashings, fire stop (barrier)-cum-smoke seals, microwave cured EPDM gaskets for water tightness, pressure equalisation & drainage and protection against fire hazard including:
148	b) Fabricating and supplying serrated M.S. hot dip galvanised / Aluminium alloy of 6005 T5 brackets of required sizes, sections and profiles etc. to accommodate 3 Dimentional movement for achieving perfect verticality and fixing structural glazing system rigidly to the RCC/ masonry/structural steel framework of building structure using stainless steel anchor fasteners/ bolts, nylon seperator to prevent bimetallic contacts with nuts and washers etc. of stainless steel grade 316, of the required capacity and in required numbers.
149	c) Providing and filling, two part pump filled, structural silicone sealant and one part weather silicone sealant compatible with the structural silicone sealant of required bite size in a clean and controlled factory / work shop environment , including double sided spacer tape, setting blocks and backer rod, all of approved grade, brand and manufacture, as per the approved sealant design, within and all around the perimeter for holding glass.
150	d) Providing and fixing in position flashings of solid aluminium sheet 1 mm thick and of sizes, shapes and profiles, as required as per the site conditions, to seal the gap between the building structure and all its interfaces with curtain glazing to make it watertight.
151	e) Making provision for drainage of moisture/ water that enters the curtain glazing system to make it watertight, by incorporating principles of pressure equalization, providing suitable gutter profiles at bottom (if required), making necessary holes of required sizes and of required numbers etc. complete. This item includes cost of all inputs of designing, labour for fabricating and installation of aluminium grid, installation of glazed units, T&P, scaffolding and other incidental charges including wastages etc., enabling temporary structures and services, cranes or cradles etc. as described above and as specified. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin- Charge.
152	Note:- 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing and vermin proof stainless steel wire mesh shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves ) on the external face shall be measured in sqm. up to two decimal places.
153	Note:-2. The following performance test are to be conducted on structural glazing system if area of structural glazing exceeds 2500 Sqm from the certified laboratories accreditated by NABL(National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. Cost of testing is necessity of testing on the basis of cost of the work, cost of the test and importance of the work. Performance Testing of Structural glazing system Tests to be conducted in the NBL Certified laboratories
154	1. Performance Laboratory Test for Air Leakage Test (-50pa to – 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr”
155	2. Static Water Penetration Test. (50pa to 1500pa) as per ASTME- 331-09 testing method for a range up to 2000 ml.”
156	3. Dynamic Water Penetration (50pa to 1500pa) as per AAMA 501.01- 05 testing method for a range upto 2000 ml”
157	4. Structural Performance Deflection and deformation by static air pressure test (1.5 times desing wind pressure without any failure) as per ASTME-330-10 testing method for a range upto 50 mm”
158	5. Seismic Movement Test (upto 30 mm) as per AAMA 501.4-09 testing method for Qualitative test” Tests to be conducted on site
159	6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35psi) upto 2000ml”
160	Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge.
161	Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass (loee glass) of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- in- Charge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.(Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).
162	(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement.
163	Supplying, fitting & fixing local made COLLAPSIBLE GATE of approved size and make properly fabricated with vertical double channel 20 x 10 x 2 mm at 100 mm center and braced with M.S. flat diagonals 20 x 3 mm with top and bottom rail of T. iron 40 x 40 x 6 mm with 38 dia steel pulleys complete with bolt, buts locking arrangement, steppers, handles including applying a primer coat of read lead paint carriage, hoisting and taxes etc. all complete as per building specification and direction of Engineer Incharge.
164	Supplying, fitting & fixing M.S. GRILL made of 20 x 6 mm flat as per approved design and drawing properly fabricated with joints continuous fitted, welded and finished smooth, hoisting as per building specification and direction of E/I.
165	Providing and fixing sliding arrangement in racks/ cupboards/cabinets/ Window shutter by with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
166	Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :
167	WATER PROOFING TREATMENT
168	Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roof terraces etc. consisting of following operations.
169	Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with proprietary water proofing compound conforming to IS : 2645 over the RCC slab including cleaning the surface before treatment.
170	Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar of mix 1:5 ( 1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 over 20 mm thick layer of cement mortar 1:5 (1 cement : 5 coarse sand ) admixed with proprietary water proofing compund conforming to IS :2645 to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs
171	After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS: 2645.
172	Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 ( 1 cement : 4 coarse sand ) admixed with proprietary water proofing compund conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300X300 mm square.
173	The whole terrace so finished shall be flooded with water for minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the E/I.
174	With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
175	Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying
176	a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
177	(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.
178	The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
179	-------------------------------------------------------------------------------------------------------------------------------
180	Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
181	For vertical surface two coats @ 0.70 kg per sqm
182	For horizontal surface one coat @1.10 kg per sqm
183	Providing 12mm cement plaster(1:3) with clean coarse sand of F.M 1.5 including screening, curing with all leads and lifts of water scaffolding taxes and royalty all complete as per building specification and direction of E/I.
184	Providing 1.5 mm th. cement punning including curing, carriage of water with all leads and lifts as per building specification and direction of E/I.
185	-------------------------------------------------------------------------------------------------------------------------------
186	Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper applying putty wherever required scaffolding washing of floors and taxes all complete as per building specification and direction of E/I
187	Providing two coat of snowcem of approved shade and make over a coat of cement of primer on new surface including preparing the plastered surface smooth with sand paper, soaping, curing and taxes all complete as per building specification and direction of E/I.
188	Finishing walls with Premium Acrylic Smooth exterior paint with silicone additives
189	New work (Two or more coats applied @1.43 ltr / 10sqm. Over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20 kg./10 sq.m. )
190	Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall suface to prepare the surface even amd smooth complete.
191	Finishing walls with textured exterior paint of required shade :
192	13.45.1 New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/ 10 sqm
193	Providing two coats of SYNTHETIC ENAMEL PAINT of approved shade and make over new WOODEN surface including cleaning the surface after removing dirt, scales, grease and sand papering, including cost of scaffolding etc. all complete as per building specification dirction of E/I.
194	Providing Primer one coat of read lead paint of approved make over new STEEL SURFACE preparing the surface after cleaning, removing rust, dirt, scales, smokes and grease and cleaning the surface thoroughly including cost of scaffolding and taxes all complete as per building specification and direction of E/I.
195	Providing 2 coats of SYNTHETIC ENAMEL PAINT of approved shade and make over STEEL SURFACE grills & railings including cleaning the surface thoroughly scaffolding and taxes all complete as per building specification and direction of E/I.
196	MISCELLANEOUS WORK
197	Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purpose only only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners, etc.)
198	Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
199	In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
200	Providing and fixing plain multipurpose cement board(High pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately).
201	6 mm thick Cement fiber board as per IS: 14862
202	Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recomme-nded jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer’s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
203	12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)
204	Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
205	Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK.
206	Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
207	110 MM
208	Providing 250 mm wide BRICK DRAIN in cement mortar (1:6) with avarage 150mm. Clear depth and 250 mm apron including cost of earthwork involved with 75m cement concrete (1:4:8) over one brick designation 75A, flat soling in proper grade and slope at the base , the drain dully plastered in C.M.(1:3) with puning over exposed surface all complete as per building specification and direction of E/I.
209	Making Soak Pit 2.5 m diameter 3.0 meter deep with 45x45cm dry briick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8m long complete as per standerd design .
210	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
211	CARRAIGE OF MATERIALS
212	LOCAL SAND , LEAD - 2P+1K= 3 KM.
213	COARSE SAND , LEAD - 9P+1K= 10 KM.
214	STONE CHIPS , LEAD - 21P+1K= 22 KM.
215	BRICKS , LEAD- 7P+1K= 8 KM.
216	SANITARY & WATER SUPPLY
217	Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast iron P or S trap, 10 litre low level white P.V.C. Flushing cistern with munally controlled device (handle lever) conforming to IS:7231 with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
218	White Vitreous China Orissa pattern W C pan of size 580 X 440 mm with integral type foot rest.
219	Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled devicde (handle lever), conforming to IS:7231, /with all fittings and fixtures complete including cutting and making good the walls and floors wherever required.
220	W.C. pan with ISI marked white solid plastic seat and lid.
221	Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
222	15mm nominal bore
223	Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
224	15mm nominal bore
225	Providing and fixing C.P Soap Dish of aaproved size, shape and approved brand with concealed fittings, complete job.
226	Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
227	15mm nominal bore
228	Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
229	White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
230	Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
231	Providing and fixing white vitreous china flat back half stall urinal of 580X380X350mm with white PVC automatic flushing cistern, parryware/Hindware with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass with waste fitting as per IS : 2566 P.V.C. trap with outlet grating and other couplings in C.P. brass including parenting of fitting and cutting and making good the walls and floors wherever required..
232	Single half stall urinals with 5 litre P.V.C. auotmatic flushing cistern
233	Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end )
234	32MM nominal bore.
235	Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete.
236	25mm nominal bore
237	Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
238	Providing and fixing 100mm dia. Steel Jali of approved quality.
239	Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S.13983 with C.I. Brackets stainless steel plug 40mm including painting of fittings and brackets cutting and making goods the walls wherever required:
240	kitchen sink without drain board
241	470x420mm bowel depth 178mm
242	Providing and fixing C.P Sink cock with swinging casted spout with concealed fitting arrangements.
243	Providing and fixing unplasticised P.V.C. connection pipe with c.p. nuts collar and bush of approved quality.
244	15 mm nominal bore with 45 cm length.
245	Providing And fixing 32 mm waste pipe for sink or wash basin including P.V.C. waste fittings complete.
246	Flexible Pipe
247	Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. (ITEM FOR RAIN WATER, SOIL, WASTE & VENT PIPES)
248	110 mm dia
249	Providing & fixing on wall face unplasticised -P.V.C. moulde fittings / accessories for unplasticised - Rigid P.V.C. rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion .
250	Coupler -
251	110 MM
252	Single pushfit Coupler
253	110 MM
254	Single tee with door
255	110X110X110 MM
256	Single tee without door
257	110X110X110 MM
258	Bend 87.5°
259	110 MM
260	110 MM
261	Supplying and fixing 100mm S.C.I. trap with 100mm inlet and 100mm outlet, with all complete.
262	110X100 MM
263	Supplying and fixing 100mm S.C.I. trap with 100mm inlet and 75mm outlet, with all complete.
264	110X750 MM
265	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of E/I.
266	Concealed work including cutting chases and making good the wall etc..
267	15 mm nominal dia Pipes
268	20 mm nominal dia Pipes
269	Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joining of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of E/I.
270	25 mm nominal dia Pipes
271	32 mm nominal dia Pipes
272	Providing and laying non- pressure NP2 class ( light duty ) R.C.C. pipes with collars jointed with still mixture of cenent mortar in the proportion of 1:2 ( lcement : 2 fine sand ) including testing of joints etc. complete.
273	150 MM dia R.C.C. pipe
274	250 MM dia R.C.C. pipe
275	Constructing brick masonary chamber for Underground C. I. Inspection Chamber and bend with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. Cover with frame (light duty) 455X610 mm internal dimensions, total weight of cover with frame to be not less than 38 KG. (weight of cover 23 kg. and weight of frame 15 kg) RCC top slab with 1:1.5:3 mix (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 mix (1 cement:5 coarse sand :10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm th. with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:
276	Inside dimensions 455X610X mm and 45 mm deep for single pipe
277	With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
278	Providing and fixing C.P. brass Health Faucet (Telephonic shower with flexible pipe) including 450 mm long Braided Hoses with all fittings complete job.
279	-------------------------------------------------------------------------------------------------------------------------------
280	Providing and fixing C.P. Towel Ring (round) with flange
281	-------------------------------------------------------------------------------------------------------------------------------
282	Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
283	ELECTRICAL WORKS
284	Point wiring in pvc conduit , with modular type switch:-Wiring for light point/fan point/exhaust fan/call bell point with 1.5 sqmm PVC insulated copper conductor cable in surface / recessed PVC conduit with moduler type switch,moduler plate,suitable size GI box etc. as required .
285	Twin control point wiring in pvc conduit with modular type switch:- Wiring for Twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit, with 2way modular switch ,modular plate, suitable GI box etc. as required.
286	Power plug wiring in pvc conduit (2x4 sq mm):Wiring for light/ power plug plug with 2 X 4 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
287	Power plug wiring in pvc conduit (4x4 sq mm):Wiring for light/ power plug plug with 2 X 4 sq. mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
288	Circuit / sub main wiring in pvc conduit:Wiring for submain wiring with the following size of PVC insulated, copper conductor single core cable in surface / recessed PVC conduit as required:
289	2x1.5 sq.mm.+1x 1.5 sq mm(for toilet switch board +6A socket)
290	2x2.5 sq.mm.+1x 2.5 sq mm(for switch board )
291	2x6 sq.mm.+1x 6 sq mm( Sub-Mains DB's)
292	4 x 6 sq mm +2x6 sq.mm. (Sub-Mains DB's to Panel+3Ph AC)
293	4 x 10 +2x6 sq.mm. (Sub-Mains DB's to Panel)
294	4 x 16 +2x6 sq.mm. (Sub-Mains DB's to Panel)
295	Wiring in existing conduit:-Supplying and drawing following sizes of PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit / PVC casing capping / as required.
296	2x1.5 sq mm
297	3x2.5 sq mm (For (Lift)
298	4x6 sq mm(For Lift)
299	Supplying and fixing PVC conduit:-S/F of following sizes of PVC conduit alongwith the accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required .
300	20 mm PVC coduit.
301	25 mm PVC coduit.
302	Supplying and fixing modular type switch / socket :-Supplying and fixing following moduler switch / socket on the existing moduler plate & switch box including connection but excluding moduler plate etc. as reqd.
303	5/6 amps switch
304	5/6 amps socket outlet
305	Telephone socket outlet
306	Supplying and fixing modular type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulator on the existing modular plate & switch box including connection but exluding modular plateetc.as required..
307	Supplying and fixing modular type blanking plate.:- Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
308	Supplying and fixing modular boxes,base & cover plate:- supplying and fixing following size/ modules, GI boxSupplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.as required.
309	1 or 2 Module (78mmX78mmx45mm)
310	Supplying and fixing light plug point with modular type accessories :-Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps. moduler type switch, connections painting etc. as required. (For light plugs).
311	Supplying and fixing power plug point with modular type accessories :- Supplying and fixing suitable size GI box with moduler plate cover in the front on surface or in recess including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps. moduler type switch, connections painting etc. as required. (For power plugs).
312	Supplying and fixing S.P. MCB DB :- Supplying and fixing of following way, single pole and neutral, sheet steel, MCB distribution board,240 volts,on surface /recess, complete with tinned copper bushbar, neutral link, earth bar, din bar, interconnections powder painted including earthing etc. as required. (but without MCB/RCCB/Isolator)
313	8 way double door
314	Supplying and fixing T.P MCB DB :- Supplying and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts,on surface /recess, complete with tinned copper bushbar, neutral link, earth bar, din bar, detachable gland plate, interconnections,powder painted including earthing etc. as required. (but without MCB / RCCB /Isolator)
315	4 way(4+12)double door Horizontal type
316	6 way (4+18)double door Horizontal type
317	8 way (4+24)double door Horizontal type
318	Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' catagory, miniature circuit breaker (10 KA) of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
319	single pole(6 to 32A)
320	6/32 amps.SPN
321	32 amps.TPN
322	40 amps.TPN
323	63 amps. TPN
324	Supplying and fixing following ways, surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amp tinned copper bus bar, common neutral link, earth bar, din bar, for mounting MCB's (but without MCB's and incomer) as required. (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
325	4 way (8 + 12 ), Double door, Vertical type
326	32 amps.TP
327	63 amps.TP
328	8way (8 + 24 ), Double door, Vertical type
329	32 amps.TP
330	63 amps.TP
331	Supplying and fixing following rating and breaking capacity MCCB thermomagenatic release and terminal spreaders in existing cubical panel board including drilling holes in cubical panel,connections etc as required.
332	25/100 Amps
333	160 amps, 16 KA, fixed thermal setting MCCB FP
334	Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \\"C\\"curve including connections, painting etc. as required.
335	Supplying and drawing following pair 0.5 sq mm FR PVC insulated copper conductor unarmored telephone cable in the existing surface / recessed PVC conduit as required,
336	2 Pair
337	4 Pair
338	CABLE & CABLE TRAY
339	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade.of following size on wall surface as required.
340	Above 35 sq mm and upto 95 sq mm (clamped with 20mmx3mmGI tape)
341	Laying of PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size exceeding185 sq mm but not exceeding 400 sq mm Direct in ground including excavation ,sand cushioning protective covering and refilling the trench etc as required.
342	Laying of one number additonal PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade. of size not exceeding 185 sq mm but not exceeding 400 sq mm Direct in ground in the same trench in one tier horozontztal formating including excavation ,sand cushioning protective covering and refilling the trench etc as required.
343	Supply of PVC/ XLPE Insulated PVC sheathed heavy duty armoured electric cable with alluminium conductor for working voltage upto and including 1100 volts (conforms to IS:1554,part-1)
344	35 sq mm x 3.5 core
345	95 sq mm x 3.5 core
346	300 sq mm x 3.5 core
347	Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
348	3½ X 35 sq. mm (32mm)
349	3½ X 95 sq. mm (35mm)
350	3½ X 300 sq. mm (70mm)
351	Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% , in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc.as required.
352	300 mm width X 50 mm depth X 1.6 mm thickness
353	MAIN DISTRIBUTION BOARDS / L.T. PANEL.
354	Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel.
355	LT PANEL (NORMAL SUPPLY) : -INCOMING (1- sets ) each with following:
356	800 Amp, MCCB FP -1no, Ammeter, ASS, CTs, Voltmeter, VSS, Fuses, 1 Sets of Phase Indicating Lights with fuses & following accessories: -
357	BUS BARS
358	1sets of 1000 Amp, 415V, 3 phase, 50 Hz TPN copper bus bars.
359	OUTGOING
360	200 Amp, MCCB FP -3 no
361	25/100 A, MCCB FP -3no
362	6/32 amps.SPN-2no
363	6/32 amps.TPN-2no
364	40 amps.TPN-6no
365	63 amps. TPN-6no
366	LT Panel (Normal) as above ( L.GF)
367	800 amps,35 KA, Adjuslable thermal setting MCCB FP
368	200 amps,35 KA, Adjuslable thermal setting MCCB FP
369	25/100 amps, 16 KA, fixed thermal setting MCCB FP
370	6/32 amps.SPN MCB
371	6/32 amps.TPN MCB
372	40 amps.TPN MCB
373	63 amps. TPN MCB
374	LED INDICATOR LAMP R/Y/B/G
375	DIGITAL VOLT METER 500V(3phase class 0.5)
376	DIGITAL A METER 500V(3phase class 0.5)
377	3way 4pole selector switch
378	CT coil of CT tatio 800/5 IS 2705 part 3
379	25MM*5MM(1.15 KG/MTR)copperStrip
380	50MM*5MM(2.30 KG/MTR)copperStrip
381	10 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
382	6 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
383	1.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
384	Supplying and fixing wall floor mounted cubical panel board , fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector ,incliding busbar chamber,insulator and painting etc.as required .(but without busbar copper strip)
385	FLOOR PANEL
386	Design manufacture, supply installation, testing and commissioning of 16 SWG sheet steel fabricated cubical type floor mounting front operated construction, enclosure class - IP 52, finishing with 7 tank process and powder coating of the entire panel including covers in required shade complete with top / bottom ( as called for ) removable gland plates, cable alleys, double compression doors to achieve dust and vermin proof complete with all inter connections small wiring by copper wires, ckt labels etc. The Copper Bus Bar shall be of suitable size for 500 volts, 3 phase 50 Hz TPN, electrolytic copper as per Is 8623 insulated by heat shrinkable sleaves with surround joints. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmeter, selector switches, CT's, PT's, etc. The panels shall be got fabricated only from panel builders having 7 tank process finishing system and CPRI approved certificate for similar LT Panel.
387	FLOOR PANEL (NORMAL SUPPLY) : -INCOMING ( 1st/2nd/3rd/4th floor)each set with following:
388	200 Amp, MCCB FP -1no, Ammeter, ASS, CTs, Voltmeter, VSS, Fuses, 1 Sets of Phase Indicating Lights with fuses & following accessories: -
389	BUS BARS
390	1sets of300 Amp, 415V, 3 phase, 50 Hz TPN copper bus bars.
391	OUTGOING
392	160 Amp, MCCB FP -1 no
393	25/100 A, MCCB FP -
394	6/32 amps.SPN-
395	6/32 amps.TPN-
396	40 amps.TPN-3no
397	63 amps. TPN-3no
398	LT Panel (Normal) as above .
399	200 amps,35 KA, Adjuslable thermal setting MCCB FP
400	150/160 amps, 16 KA, fixed thermal setting MCCB FP
401	6/32 amps.SPN MCB
402	6/32 amps.TPN MCB
403	40 amps.TPN MCB
404	63 amps. TPN MCB
405	LED INDICATOR LAMP R/Y/B/G
406	DIGITAL VOLT METER 500V(3phase class 0.5)
407	DIGITAL A METER 500V(3phase class 0.5)
408	3way 4pole selector switch
409	CT coil of CT tatio 200/5 IS 2705 part 3
410	25MM*5MM(1.15 KG/MTR)copperStrip
411	10 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
412	6 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
413	1.5 sq mm ISI marked FRLS PVC insulated single core copper conductor cable
414	Supplying and fixing wall floor mounted cubical panel board , fabricated with 16 gauge iron sheet suitable for panel mounted switch disconnector ,incliding busbar chamber,insulator and painting etc.as required .(but without busbar copper strip)
415	EARTHING & LIGHTNING CONDUCTOR.
416	80mm dia earthing electrode 2mtr Length/ 80mm dia earthing electrode 3mtr Length /50mm dia earthing electrode 2mtr Length/50mm dia earthing electrode 3mtr Length and backfill compound chemical 4 bag (per bag 25Kg)
417	Providing and fixing 8 SWG copper wire (4.0 mm dia)(0.1185kg/mtr).
418	Providing and fixing of lighting conductor finial, made of 25mm. Dia. 300mm. Long copper base plate including holes etc. complete as required.
419	Rivetting, sweating and soldering of copper/GI tape (with another copper/GI tape base of the finial or any other metallic object) as required.
420	Providing and fixing GI tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as reqd.(for horizontal run)
421	Providing and fixing GI tape 20mmx3mm thick on parapet or surface of wall for lightning conductor as reqd.(for vertical run)
422	SUPPLY OF LIGHTING FIXTURES & FANS
423	Supplying, Installation, Testing & Commissioning of following rating surfface mounted LED tube light fitting suitabe for 230v 50Hz single phase supply etc complete as require
424	20/22w LED tube light
425	Supplying, Installation, Testing & Commissioning of following rating recess/ surfface mounted LED round /square shape down light luminaierewith pressure die cast housing for single phase supply voltage luminarie shall be confirm to IS:10322 part-5/section 2 or IEC :62722 with all necessary accessories as required.
426	12w LED round down light.
427	18/20w LED round down light.
428	2\\"x2\\"LED panel light
429	Supplying, Installation, Testing & Commissioning of following size ceiling fan 3 blades confirming to IS-374:2019including wiring the down rods of standared length (upto 30 cm)with 1.5 sq mm FR PVC insulated copper wire suitable for 230v 50Hz single phase supply etc.as required.
430	1200mm (48\\")BLDC 5 star rating 32w Ceiling fan
431	1400mm (56\\")BLDC 5 star rating 32w Ceiling fan
432	16'(400mm) Wall mounted fan
433	450 mm (18\\") metal body wall fan with speed regulator suitable forsingle phase 220v,50Hz AC supply
434	9\\" (230) mm )metal exaust fan
435	12\\" (300) mm )metal exaust fan
436	Providing of bulkhead fitting with 9/10w LED bulb.
437	ERECTION OF LIGHTING FIXTURES
438	Supplying and fixing 2 pin 5A ceiling rose on the existing junction box wooden block including connection etc ,as required.
439	Erection of wall bracket / ceiling fittings of all sizes and shapes ontaining upto two GLS lamp per fitting complete with all accessories including connection etc as required.
440	Installation of exhaust fan upto 450 mm. sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damage, connections, testing, commissioning etc. as required.
441	SPLIT AC
442	Supplying, installations, testing and commissioning 1.5 Tr Inverter Split AC with 5 star rating, which includes low power consumption and as it is an inverter based technology i.e. will expand its cooling capacity according to the room temperature having 100% copper tube, Superslit Find and also have smooth air and clean air flow features with cooling system, Intelligent Defrost mode including drain pipe, copper pipe of required length, outdoor ms stand (painted) as required and complete job.
443	Supplying, installations, testing and commissioning 2.0 Tr Inverter Split AC with 5 star rating, which includes low power consumption and as it is an inverter based technology i.e. will expand its cooling capacity according to the room temperature having 100% copper tube, Superslit Find and also have smooth air and clean air flow features with cooling system, Intelligent Defrost mode including drain pipe, copper pipe of required length, outdoor ms stand (painted) as required and complete job.
444	Copper tube of size 1/4\\"for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation.
445	Copper tube of size 1/2\\" for split ac unit 1/1.5/2/3 tr capacity including nitride rubber insulation.
446	5 KVA wall mounted automatic voltage stablizer from range 140v to 280v .
447	Drain pipe for AC
448	Outdoor stand for 1/ 1.5tr split AC.
449	Outdoor stand for 2 tr split AC.
450	Non Schedule
451	Providing, Supplying and installing Potable water purification system with inbuilt water cooler RO system with stainless steel (304G) 120 ltrs water storage capacty & 2 tap, fully automatic, including all complete. (Brand Blue Star (NST80120B)/ Equivalent)
452	Providing and fixing C.P. brass concealed Stop valve of standard design and of approved make conforming to IS:8931. - 20 mm nominal bore. (Approved brand - ESCO/ Jaquar/ Equivalent)
453	FURNITURE
454	Supplying and fixing of Dining/ Cafeteria Chair with following specification, Approved Brand - Godrej/ Durian/ Featherlite/ Bonton. The overall size of dinning chair shall be 520mm (B) x 550mm(D) x 840mm total height x 450mm sear height. The seat and back are made of injection moulded high impact strength polypropylene polymer compound with indoor grade UV Resistance. The Powder coated (DFT50+microns) welled tubular frame is made from 2.22 + 0.03 cm x 0.16+/- 0.0128cm and 3.5+/- 0.03 cmx1.5+/-0.03 cm x 0.16 +/- 0.0128 cm M.S.E.R.W tube. The Shoes are made of high impact strength polypropylene polymer compound with indoor grad UV Resistance and pressed fitted with tubular frame.
455	Supplying and fixing of Three Seater Sofa with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. . Providing and placement of 3 seater sofa with Overall Size 1860mm(W) 850mm(D) 890(H). Seat Ht 450mm. Handle Ht- 650mm.Upholstery Material: Premium Quality Pu Cloth/Leatherite. Frame Material : Combination of plywood and pine Wood, Plywood thickness : 12 mm (moisture resistance and termite free). Pinewood cross section - 22x64 mm. Moisture content: 10-12%. Seat Material : 45 mm thickU foam, Density : 32. Super soft 45 mm at top. Dacron 150GSM. Back Material : 32mm thick U foam, Density : 28. 32mm thick U foam,Density : 28. Outer foam 10 mm thick, Density 28. Dacron 150 GSM. Fitted with 75 mm wide elastic belts. S/Zick Zack Spring of dia. 3.8mm mounted on seat structure using Metal mounting clip. Legs : Prime quality Metal, Ht. 75mm.
456	Supplying and fixing of Centre Table with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Featherlite/ Bonton, as per approved colour and design. Overall Size: 1200 x 600 x 450 mmLegs shall made out of 7 5 x7 5 mm teal rood section.Top rail shal1 be made of 7 0x22mm as per photograph.Top shall be made of 18mm veneer faced MDF board.Teak wood beading of 18mm shall be fitted as per approval.Polish- PU polish shall be done.
457	Supplying and fixing of Regular Office Table with Side Unit with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Overall Dimention: 1500x600x750 mm Ht. Top made of pre laminated MDF board with pvc edge beading. Understucture also made up of pre laminated particle board with pvc edge beading.Top- Size :- 1500x600x25 MM thk. Pre Laminated MDF Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.Modesty- Modesty made up of 18 MM thk. Pre Laminated PMDF Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.Under Structure- Side Leg made with a Combination of 25 MM thk. Pre Laminated MDF Board with Aluminium section of size 60X40 with grooving. Leg/Side Base & Top plate with profile cut made of M.S. plate 44 mm width & 4 mm thk with knock down fitting arrangement.Cable duct made up of 0.8 mm CRCA Sheet. Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of MDF board covered by 2 mm thick PVC Edge beading by Through Feed Machine.SDU with Drawer- Size: Height:750mm,Width:900mm,Depth:450mm. Body part made-up of prime quality cold rolled close annealed SheetUse only MIG/TIG & Spot welding for fabrication. Top made of 18mm thick Pre-laminated MDF Board. Side Edges covered with PVC edge band on edge bending machine. Provision of drawer below table top with telescopic channel. Superior Quality make lock. PVC handles.Doors in cold rolled close annealed M.S. Sheet. Doors are Top hung slide on roller bearing. All steel components are epoxy powder coatedfollowed by seven tanks anti corrosion treatment of surface.Cap & Levellers- Flat type leveller has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment ofsurface.
458	Supplying and fixing of Office Chair with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size: Total Height-1000mm, Depth 660mm, Width-640mm Seat Height: 510mm. 5-Prong nylon base for stability. Twin Wheel heavy DutyCastor for easy mobility under load. 12 mm Hot pressed plywood with steel T-Nuts for rigid fastening. Seat and back are covered with PPcover. Sturdy steel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Two positionLockable synchrony tilt mechanism with Single piece integral skin. 2-D Up & down height adjustable PU arm rest. Quality tapestry. Highdensity Moulded PU cushion. Upholstery 1.5 Mtr.
459	Supplying and fixing of Chair for Computer Operatorswith following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size-H:970-1070mm, Seat ht: 480-580mm, D-490mm, W-490 mm. 5-Prong nylon base for stability. Twin Wheel heavy DutyCastor for easy mobility under load. Seat Hot pressed ply wood with steel T-Nuts for rigid fastening. Back with stitched Mesh Cloth. Sturdysteel column gas lift for centre support and seat height adjustment. Telescopic ABS cover over steel column. Lockable Centre TiltMechanism and with Single piece Die castes Fixed PP arm rest . Quality Mesh Febric. High density Moulded PU cushion.
460	Supplying and fixing of Chair for Visitors, AV room, Library, Seminar Hall , with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size:-Overall H: 890mm,D:580mm,W: 545mm:- Back & Seat Moulded Cushion, Non-revolving• Back Outer PPCP• Crape Tapestry• PU Handle• Hot pressed Ply• Frame Oval Tube 13*31 mm-16g With Powder Coated.
461	Supplying and fixing of Multipurpose Table, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size - 1800x1200x750mm. Top made of 25 mm thick Pre laminated Particle Board. Under structure made of 40x40x1.6 mm thick Square Tube.The product comes in knock-down conditional for ease of transportation. No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
462	Supplying and fixing of Work Station, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Overall Dimention 1200mm W X 600mm D X 750mm H.Top-Made from 25 mm Thick Pre-laminated Particle board. All the edges are sealed with 2 mm thick PVC edge band all around,Understructure - Made of 18 mm thick pre laminated particle board. with Fixed Pedestal.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment ofsurface.
463	Supplying and fixing of Steel Almirah, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size:-height:1980mm width:910mm depth:485mm Body part made-up of prime quality cold rolled close annealed Sheet Use only MIG/TIG &Spot welding for fabrication.4 adjustable shelf. Three way locking device with six levers superior quality lock for Door. Doors are mountedon steel hinge brackets. Body 22 Gauge, Door 20 Gauge. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
464	Supplying and fixing of Computer Table (computer lab & digital library), with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. 4 Seater Workstation Overall Dimension - 2463x1270x1215 mm Ht. Worktop Ht:- 750 mm. Made Up Of combination of 70 mm thick Tile Base & 21 mm thick Panel base Partition System. Individual work top size - 1200x600x25 mm thick.Middle Partition - 70mm Thick Tiles Base Partition. Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coated Sections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Fabric and Steel option. Frame structureare fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium.Side Partition - 21mm thk Partition Panel. Modular panel based partition frame are made of Extruded Aluminium sections. The different types of Aluminium profiles used in frame structure of modular partition 21 mm width. Side Panels are made of PLPB 18mm. Panel areavailable in PLPB and Fabric / White Writing Board.Worktop- are made of 25mm thick Pre-laminated Particle Board . All exposed edges are covered with 2mm thk PVC edge bend by machine. fitted to the partition with necessary M.S. cold rolled close annealed duly Powder Coated brackets. Mobile Pedestal unit PLPB- Size: Height:650mm, Width:400mm, Depth:450mm Top made of 18mm thick Pre-laminated Particle Board.Side ,back and drawer front are made by 18mm thk. Pre-laminated Particle Board. Metallic finish heavy duty handle. Superior quality makefront mounted lock. provision of Casters for mobility. Special drawer slides for filing drawer. Other drawers on roller slides.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment ofsurface.
465	Supplying and fixing of Steel Baggage Rack, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Overall Size- 975 x 450 x 2000 mm. With 5 nos of Loading Levels. Made up of .8 mm thick panesls & Angles made of 1.6 mm thick.
466	Supplying and fixing of Reading Table (Library), with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Reading Table 1500 for 2 Student - Overall Dimension - 1500x600x1215 mm Ht. Worktop Ht:- 750 mm. Made Up Of 70 mm thick Tile BasePartition System. . Front Partition - 70mm Thick Tiles Base Partition. Internal Frame are made by 1.6mm thk. cold rolled close annealed powder coatedSections. Tiles are made by 12mm. Thk. Pre laminate particle board. Tiles are also available in Fabric and Steel option. Frame structure are fabricated by MIG/TIG welding Machine. Tiles are fitted by high strength PVC Dowel in PVC Insert with transition fit. provision of Slot for cabling and accessories. upper and side trim are 1mm thk. extruded powder coated aluminium section and Pole is 1.6mm Thick Aluminium.Worktop- MSize 1500x600 for 2 Person. Made of 25mm thick Pre-laminated Particle Board . All exposed edges are covered with 2mm thkPVC edge bend by machine. fitted to the partition with necessary M.S. cold rolled close annealed duly Powder Coated brackets.Wooden Leg- 725mm Height Side panel/leg are made by 18mm thk. Pre-laminated Particle Board fitted with necessary bracket. All exposed edges are covered with 2mm thk. PVC edge bend by machine.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
467	Supplying and fixing of Notice Board, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Pin Up Board Size 900x1800 mm wuth standard FAbric of approved material.
468	Supplying and fixing of Conference table, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. 16 Seater Conference Table - Overall Dimention: 6000x1200x750 mm Ht. Top made of Prelaminated particle board with pvc edge beading.Understucture made up of pre laminated particle board with pvc edge beading.Top- 25 MM thk Prelaminated Particle Board. Side edges covered by 2 mm thick PVC Edge beading by Through Feed Machine . (The minmum size of the top for 2 Person should be 1350x600)Modesty- Modesty made up of 18 MM thk. Pre Laminated Particle Board. Open edges covered by 2 mm thick PVC Edge beading by Through Feed Machine.Under Structure- Side Leg made 25 MM thk. Pre Laminated Particle Board . Provision of Cable manager as per L.H. or R.H. side requirement. Open edges of Particle board covered by 2 mm thick PVC Edge beading by Through Feed Machine. Cap & Levellers- 2 nos of flat type leveller in each table has been provided at bottom for mentaining level. It also preventing scratches on floor & Product as well.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
469	Supplying and fixing of Auditorium Chair, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Seats Description- Push back chair or Fixed Back chair. Auto Tip-up cushion. Sliding mechanism – Proprietary item as per design. Design issubject to change for continual improvement. Without any disturbing noise. Arm-rest to Arm-rest (center dist.): 21’’to 24’’ (inches). PPCPinjectionmolded Housing for Cushion & Backrest. All sheet metal parts with powder coated / or zinc passivated. Seat numbering on cushion ontip-up portion as per BT design. Row numbering for seats along the aisles . Provision for lights on sides for seats along the aisles. Integral SkinArmrest/PPCP /Wooden. All exposed & visible parts shall be powder coated.Fabric:- Approved from our existing range of fabric. 3mm lamination on fabric. FR grade material confirms to IS 15061 For horizontal Burningtest only.Frame:- Frame of ERW Round Tube / IS :3074 - 2005 . Cushion Frame - 19 dia 1.2mm thick, Back Rest - 16 dia 1.63 mm thick, S Spring WireDia – 2.9. Remark – dimension tolerance +2 mm.Polyurethane Foams:- Density: 45 + 5 Kg/M3 / JIS K 6401. Constant Compression Set: (Max. 13%) JIS K 6401. Remark – dimension tolerance+ 10 mm.Spring:- For Auto Tip-up – Torsion Spring / Spring Steel IS : 4454 1981 GRADE 2 (part I). For Push Back mechanism – tension Spring / SpringSteel IS : 4454 1981 GRADE 2.Wing Components:- HRPO Sheet Metal / IS : 1079 - 1994 . Wing frame : Rectangular Style. ERW Square tube IS:4923-1985 25X25 1.63mmThick. Side wing frame with With fabric upholstered plywood. Remark – dimension tolerance + 2 mm.Back & Cushion Housing:- Material: PPCP (Injection Molded). Back Rest - IS:10951-1984 PPCP BLACK 2.3mm thick. Cushion - IS:10951,PPCP BLACK 2mm thick. Remark – dimension tolerance + 2 mm.Arm-rest:- Integral skin PU with water Fall Edges /PPCP Injection Molded with Integral skin PU / Wooden.Slider Mechanism:- Sliding mechanism Will have travel of max 60mm forward. Roller and ball cage mechanism for sliding. Size – channel33X210MM 2MM Thick. Proprietary item as per design. Design is subject to change for continual improvement of the mechanism. Remark –dimension tolerance + 2 mm.Seat Dimension:- Cushion Height – 440 +10. Back Rest Height – 1030 +10. After Push Back Dimension – 920 +10. Normal Dimension – 750+10. Remark – dimension tolerance + 10 mm.Installation Hardware:- RCC Flooring 4 Inch - Anchor Fastener M8X100mmL. Sleve Dia 14mmWith 30mmL (2 Nos). Wooden Flooring 2 Inch -Coach Bolt for M8X40/50 (2 Nos).Special Note:- All part detail mention are subject to change for continual improvement of the seat. Seat will be tested as per our specificationonly. other test will be applicable to our seats in not mention of our specification.
470	Supplying and fixing of Low Height Storage, with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Size: Width:1050mm, Depth:450mm, Height:750mm Top made of 18mm thick Pre-laminated Particle Board. Whole structure & Door's are made by 18mm thk. Pre-laminated Particle Board. Side Edges covered with PVC edge band on edge bending machine.Construction- The product comes in knock-down conditional for ease of transportation.Finish- No sharp edges in the prodect. All steel components are epoxy powder coated followed by seven tanks anti corrosion treatment of surface.
471	Supplying and fixing of Six Seater Dining Table (Cafeteria), with following specification with 3 years warranty, Approved Brand - Godrej/ Durian/ Herman Miller/ Bonton, as per approved colour and design. Providing and placement of Canteen table. Size shall be 1734 Width mm x 1175 Depth mm x 750 Height mm . Top shall be 25 mm thick base material shall be 25 mm MDF board . On top PU painting of minimum 2H hardness with 75% glass as per colour chart.White Laminate on bottom specially profiled edges for comfort . The Under structure shall be having bend pipe structure of MS powder coated . Pipe dia 38 mm , 2 mm thick and it shall be fitted with top by SS machine screws . Legs shall be of MS powder coated and 38 mm dia. pipe legs are fixed with under structure and table top. Glide shall be of Plastic fixed at the under structure to prevent the damage of table top during stacking
472	Providing and Installing, Testing & Commissioning of 13 Passenger automatic (machine room less) Lift - 1no., including one year free maintenance which will be start from handing over the lift, all taxes and all complete as per following detail specifications. (MAKE:- SCHINDLER/ OTIS/ JOHNSON/ MITSUBISHI & TOSHIBA)
473	Product Line item 100- E1 (MULTIPURPOSE BUILDING G+5)
474	Number of Units - 1
475	Elevator Function - Person Elevator
476	Capacity / Number of passengers - 884 kg / 13 Passengers
477	peed - 1.0 m/s
478	Number of Stops / Entrances - 6 / 6 (G,1,2,3,4,5)
479	Main stop - 1(G)
480	Machine room - Machine room less
481	Headroom - 4500 mm
482	Pit depth - 1400 mm
483	Shaft dimensions W x D - 2000 mm x 2400 mm
484	Building tolerance - -25 mm / +25 mm
485	Shaft Wall - Concrete
486	Car dimensions W x D x H - 1050 mm x 2100 mm x 2100 mm
487	Car Door size W x H - 900 mm x 2000 mm
488	Car Door Type - Door center opening, 2 panels
489	Landing door fire protection classification - EN 81-58 E120 [ Two hours fire rated ]
490	Counterweight location - On the left side
491	Car access sides - 1
492	Door drive - Fermator Compact
493	Drive and control - Full Collective control - Simplex
494	Controller position - In the right door jamb (LDU)
495	Controller location - Landing at floor 6 on side 1
496	Drive Power - 5.7 kW
497	Main connection - TN-S (3L+PE+N)
498	Main power supply - 415 V 50 Hz
499	Light power supply - 230 V
500	Number of trips per hour - 180

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Jharkhand Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of New Building(Multipurpose Block, (Src-Cum-Auditorium)(G+5), Miscellaneous Work Of J.L.N. College, Chakradharpur Under Kolhan University, Chaibasa (Part-B), Chaibasa-Jharkhand

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of New Building(Multipurpose Block, (Src-Cum-Auditorium)(G+5), Miscellaneous Work Of J.L.N. College, Chakradharpur Under Kolhan University, Chaibasa (Part-B), Chaibasa-Jharkhand

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us