|
| 1 | Demolishing brickwork manually/ by mechanical means including stacking of servicable materials and disposal of unservicable materials with in 50mtr lead as per direction of Engineer in Charge |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of materials with in 50mtr lead as per direction of Engineer in Charge. Cement concrete 1:3:6 or richer Mix |
| 3 | Dismantling tile work in floors laid in cement mortar including stacking materials within 50mtr lead. For thickness of tile above 10mm and upto 25mm |
| 4 | Dismantling old plaster or skirting racking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50mtr lead as per direction of Engineer in Charge. |
| 5 | Dismantling wall panelling /aluminium /gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unservicable materials and stacking of servicable materials within 50mtr lead as directed by Engineer in Charge. |
| 6 | Conveyance of dismentled materials, rubbish etc. including labour for loading and unloading beyond initial lead all complete as per direction of Engineer in charge. truck load upto 3 km. |
| 7 | Diluting and injecting chemical emulsion for POST-Constructional anti-termite treatment at points of contact of wood work by chemical emulsion chloropyriphos/ lindane or emidoclapoed (oil or kerosene based solution) @0.5 litrs per hole by drilling 6mm dia hole at downward angle of 45 degree at 150mm centre to centre and cealing the same all complete as per direction of Engineer in charge.Chloropyriphos /Lindane emulsifiable concentrate of 20% with 1% concentration OR Imidaclopid 30.5 EC. |
| 8 | Providing and finishing with 12mm cement plaster of mix 1:6 ( 1 cement : 6 Sand) |
| 9 | Providing and fixing aluminium work for framing with extruded builtup standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plug and screw or with fixing clips or with expansion holdfasteners including necessary filling up of gaps at jinction at top and bottom and sides with required PVC /neoprene flt etc aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angles , Aluminium snap beading for glazing /panelling CP brass /stainless steel screws all complete as per architectural drawings and direction of Engineer in Charge. Powder coated aluminium (aluminium thickness of powder coating 50 Micron) |
| 10 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. 12 mm thick |
| 11 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. 18 mm thick |
| 12 | Providing and fixing 5 to 6mm thick (overall thickness 12mm) corrugated decorative interior HDPC wall cladding boards of approved brand, design,texture and shade all complete as per direction of Engineer in charge. |
| 13 | Providing and fixing 1.5 mm thick Laminates (MARINO)glossy finish or simple mat finish as per requirement and direction of EngineerinCharge with adhesive of approoved make complete as and where required cost including all wastage and adhesive etc complete. |
| 14 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repair to scratches etc complete |
| 15 | Providing and finishing wall surface with acrylic wall care putty (water based) of approved make (Birla or Equivalent) and finished smooth and even surface to receive painting including cost of scaffolding staging charges with all cost of materials taxes labour T&P etc complete as per manufacturer's specification. |
| 16 | Applying one coat of acrylic primer of approved brand and manufacturer on wall surface as per manufacturer's specification. |
| 17 | Distempering with 1st quality acrylic distemper (readymade) of approved manufacture and of required shade and colour complete, as per manufacturer's specification. New Work( Two or more coats ) |
| 18 | French spirit polishing : One or more coat over old Work |
| 19 | Structural steel work riveted, bolted or welded in built up sections , trusses and frmaned work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete. |
| 20 | ACOUSTIC FALSE CEILING Providing and fixing at all heightfalse ceiling with FLUTONE BOARD including providing and fixing of frame work made of special sections power pressed from M.S sheet and galvanised in accordance with zinc coating of grade 350 as per IS 277and consisting of angle cleats of size 25mm widex1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener12.5mm dia x40mm long with 6mm bolts to the angle hangerof 25x25x0.55mm of required length, and other end of angle hanger being fixed withnut and bolts to G.I channels 45x15x0.9mm rProviding and fixing in position with manufacture suspended false ceiling with Flutone boards which include GI perimeter channels of size 0.55mm thick having one flange of 20mm and other flange of 30mm and web of 27mm along with perimeter of ceiling screw fixed to brick walls partition with the help of nylon sleeves and SS screws at 610mm C/C then suspending G I intermediate channels of size 45mm (0.9mm thick with two flanges of 15mm each) from the soffit at 1220 mm centres with ceiling angle width 25mmx10xx0.5mm thick fixed to soffit to Gi cleat and steel expansion fasteners. Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and direction perpendicular to the intermediate channel at 457mm centres 12.5mm tapered edge gypboard (conforming to IS 2095-1982) is then screw fixed to ceiling. section with 25mm dry wall screw at 230mm centres.. screw is done mechanically either with screw drivers or drilling machine with suitable attachment. Finally the flutone boards are to be jointed and finished so as to have flush look which includes filling and finishing the tapered & square edges of the boards with jointing compound joint paper tape and two coats of Dry wall topcoats suitable for gypboard (as per recommended practices of GYPSUMindia)Cost included all materials painting with one coat of primer and two coats of acrylic emulsion paint of Approved make (ASIN/DULUX)and shade . cost includes all materials labour scaffolding tools paints lead transportation etc complete in all respect as per directionof Engineer in charge. |
| 21 | Providing and fixing Thermal insulation with resin bonded fibre glass wool conforming to IS 8183 (Twiga insul1500/50mm or equivalent) as per manufactures specification density 24 Kg/Cum, 50mm thick wraped in 200 G virgin polythelene bages fixed with metalic cleats (50x50x3mm) @ 60 Cm and wired mesh of 12.5mm square 24 gauge wire mesh and screwed with SS screw and nylon sleeve complete as per direction of Engineer incharge. Cost includes all materials labour scaffolding tools aplants transportation taxes etc complete in all respect. |
| 22 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including pointing the joints with white cement and matching pigment etc complete. Sizes of Tile 80x80Cm |
| 23 | Providing and laying Vitrified floor tiles in different sizes (thickness to be specified by the manufacturer)with water absorption less than 0.08% and conforming to IS 15622 of approved make in all colours shade laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including pointing the joints with white cement and matching pigment etc complete. Sizes of Tile 100x100xCm |
| 24 | Deduct for not using 20mm thick cement mortar 1:4 (1 cement : 4 sand) bedding in laying of floor tiles |
| 25 | Fixing glazed /ceramic /vitrified floor tiles with cement based high polymer modified quick set tile adhesive (water based) conforming to IS 15477 using 5 kg Adhesive per Sq.M of tile area in average of 3mm thick ness |
| 26 | Providing and fixing of 10mm thick poly carbonate sheet roofingup to any pitch including fixing with polymer coated J or L hooks bolts and nuts 8mm dia G.I plain /Bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. the sheets shall be manufactured out of poly carbonate sheet and polymer with Ultra -Violet stabiliser in resin system under approximately 2400 psi and hot cured,. they shall be of uniform pigmentation and thickness with out air pockets and shall conform to IS 14443: 1997 , the sheets shall be clear or pigmented, textured or smooth as specified. complete as per direction of Engineer in charge. (measurement done on Sq.m all materials and labour supplied by the agency 10mm thick Flat Please Enable Macros to View BoQ information |
