|
| 1 | M&L of Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to removedust, etc & Brushing neat cement slurry with 3.0kg of cement per sq. metre. |
| 2 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for (unreinforced) in of any thickness |
| 3 | Demolition of brickwork or stone/boulder masonery, built in cement motar. |
| 4 | Excavating hard/dense soil in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, |
| 5 | Earth work hard / dense soil excavating in trenches, not exceeding 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out . |
| 6 | M&L for sand filling under foundations,flooring,etc,including watering and consolidation. |
| 7 | M&L for cement concrete in foundation ,filling and mass concrete typeD2 1:4:8 using 40mm aggregate. |
| 8 | M&L for cement concrete in foundation ,filling and mass concrete typeB1 1:2:4 using 20mm aggregate. |
| 9 | M & L for Reinforced cement concrete M20 ( 20 mm graded aggregates) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. |
| 10 | M & L for providing RCC M20 Concrete design mix(1:1.5:3) in Beams, cantilever bressummers, lintels over 1.5m span |
| 11 | M & L For precast cement concrete set in cement mortor 1:6 type B1 (1:2:4) 20mm graded aggregate in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces. |
| 12 | M & L for flat Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter add for fair finished surface |
| 13 | M & L for flat Formwork to sides and soffits of floor or roof beams, beam haunch- ings, girders, bressummers, lintels, cantilevers, shelves including sup-ports, overhangs, etc. also splays between floors and beams, etc. and add for fair finished surface |
| 14 | S & F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, Bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 15 | S&F of mild steel bars (6 TO 8 MM) dia TMT bars dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips . |
| 16 | S&F of Virtified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes IN CM 1:4 |
| 17 | S & F Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, Joint free non skid tiles and screed bed layer in cement mortor 1:4 15 mm thick layer floor finished. |
| 18 | S & F of coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bedding 1:4, 25mm thick for laying floor finishes with for joint free |
| 19 | Material and labour for brick work Cement mortar built in CM 1:6 using sub-class ''B'' bricks ,straight or curved on plain exc 6m mean radius. |
| 20 | M&L for Plastering with CM 1:4,15mm thick on faces of old brick work and concrete surfaces. |
| 21 | M&L for applying two coats of plastic emultion paint with one coat primer on internal& exterior wall and new painted surfaces of any description over 10cm grith or width ,not othewise described all complete new surfaces including preparation of new surface. |
| 22 | M & L for cement concrete type B0 1:2:4 ,12.5 mm graded in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, |
| 23 | Supply and fixing factory-made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 24 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc.Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extrudedprofiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 25 | S & F of 5.5mm Sheet glass, ordinary quality and glazing rubber beading with in square exceeding 0.5 sq. m in each pane as required and Extra over sheet glass, ordinary quality, if sheet glass is ground or obscured or frosted, on one side. |
| 26 | Supply & Fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp-ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 27 | S&F of 30mm thick factory made single extruded WPC(wood polymer composite) solid plain flush door shutter or required size comprising of virgin polymer of k value 58-60(suspension grade), calcium carbonate and natural fiber(wood power)/rice husk/wheat husk and non toxic additives(maximum toxicity index of 12 for 100mgs) having minimum density of 650kg/cum, screw withdrawl strength of 1800N (face)& 900N (edge) minimum compressive strength of 50N/mm2, modulus of elasticity 850N/mm2 and resistence to spread of flame of class A category with property of being termite/borer proof,water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star head counter sunk SS screws, all as per direction of engineer-in-charge. |
| 28 | S&F of butt hinges length (125mm) cast, brass with mild steel hinge pin,bright polished and fixed but type B-12 |
| 29 | S&F of Aluminium handles length (150 mm), cast type,anodised |
| 30 | S&F of Aluminium anodised,Barrel tower bolts length (150mm) of extruded section and fixed. |
| 31 | S & F of Anodised aluminium frame for Partition, doors, windows, ventilators with one or more rebates including joining cleat for fixing and Powder Coating etc. complete all as specified |
| 32 | S & F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws and powder coating thickness of power coating not less than 50 micron etc. complete all as specified |
| 33 | M & L of 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work or Aluminum farme work |
| 34 | S & F of 6.3 mm Sheet glass, ordinary quality and glazing rubber beading with in square exceeding 0.5 sq. m in each pane as required for the aluminium partition. |
| 35 | M & L for Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers |
| 36 | Supply and fixing of Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm |
| 37 | S & F of aluminium(die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed |
| 38 | Suppy and fixing of steel work in tubular trusses, square tube,rectungalar tube, hollow section including special shaped washer etc. complete using ERW or induction butt welded tubes on forming to I. S.1161- 1979 grade St.-240 . |
| 39 | M & L for painting to steel surfaces of any description, over 10cm in width or girth,with two coats of synthatic enamel paint over a coat of red oxide primer including preparing new surfaces. |
| 40 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 41 | Providing & fixing false ceilling at heights with GRG (Glass Fibre Reinforced Gyspum) false ceilling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)-1970 and light reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped (galvanized iron section of 0.3mm thick @ 120 grams per sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32mm of length 600mm to form grid module of size 600x600mm, suspended from ceilling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threded hanger rod upto 1000mm length and length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000 mm to be fixed on periphery wall / pertition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and as per directions of the engineer-in-Charge. (A) With Semi perforated 12mm thick micro tegular edged GRG false ceilling tiles |
| 42 | S & F of Vitreous China wash basin, white, flat back, size 580x450 Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand and 32mm Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed Pillar taps, castcopper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed |
| 43 | S&F of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 44 | Supply & Fixing of EWC with \\"P\\" or \\"S\\" trap including bedding valveless syphonic action type 10 litres flushing cistern low level white with inlet ball valve float and handle including bracket Plastic water closet seat, black, closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device and etc. |
| 45 | Supply and fixing of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 46 | Supply and fixing of cast copper alloy screwed down, high pressure stop cock /angle cock fancy type chromium olated concealed type of size 15mm long shank and cup. |
| 47 | M&L for PVC (SWR) floor trap 75mm dia outlet of, plain with grating including and connecting PVC extension pipe including jointing with solvent cement etc., complete |
| 48 | M&L for PVC(SWR) gully trap 125/110mm setting and jointing & grating plate with solvent cement. |
| 49 | Supply and Fixing of Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) |
| 50 | Supply and Fixing of Soap dish, vitreous China white, ap-proximate size 160x160x90mm. |
| 51 | S&F of aluminium type Hat and coat hooks, solid body, 175mm to 250 mm |
| 52 | S & F of Toilet paper holder, vitreous China, box type Fixed to walls with chromium plated (CP) brass screws |
| 53 | Supplying and laying of CPVC pipes 20 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 54 | S & F of PVC (SWR) 110mm dia Pipes single socketed, in any length with rubber ring joints laid in trenches or in wall. |
| 55 | S & F of PVC (SWR)Bend with door 110mm dia any radius & provided with access door |
| 56 | Supply and fixing PVC (SWR) vent cowl 110 mm dia. |
| 57 | Removal of excavated hard (rock)materials to a lead exceeding 250 m but not exceeding 500 m and depositing where directed including, spreading & leveling |
| 58 | Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduuit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including 16SWG bare copper earth continuity wire. a) one light point or one fan point controlled by one switch with cables 1.5 sqmm size. |
| 59 | Supply and Fixing of Modular switch 1 way 6A, 1 module. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 60 | Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 61 | Supply and Fixing of Modular switch 1 way 16A, 1 module. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 62 | Supply, fixing and connecting to the system of socket, 6A/16A-2/3 pin combined modular type 2 module. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 63 | Supply & Fixing of Fan step requlater 120 watts - 2 module. (Make: Anchor Roma/ Legrand/ Myrius/Litaski/ Crabtree) or suitable equivalent make. |
| 64 | Supply & fixing 6 module plate with frame with white cover plate. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 65 | Supply & fixing metal flush box for 6 module plate. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 66 | Supply & fixing 2 module cover plate with frame with white cover plate. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 67 | Supply & fixing metal flush box for 1/2 module plate. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 68 | Supply and fixing of LED luminaire 600mmx600mm,40 watts,220v AC recessed typewith highefficiency PMMA diffuser soft glare free light complete eith driver, holders & LED lamp sutable for roofceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. (Make: Legrand/Anchor/Havells) or suitable equivalent make. |
| 69 | Supply & fixing of round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers,holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete.(Make: ANCHOR/HAVELLS /PHILIPS) or suitable equivalent make. |
| 70 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. (Make: PHILIPS / CG /Havells / Wipro) or suitable equivalent make |
| 71 | Supply and fixing ceiling fans complete with copper winding ,blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), IS 374-2019 Make : (Atomberg / Havells/ Halonix) or suitable equivalent make |
| 72 | Supply & fixing of galvanised steel tubes, medium grade 20mm dia for ceiling fan down rod. |
| 73 | Supply and fixing of LED light fittings 1 x 22 watts 220 volt AC decorative box type with driver , holder including LED tubelight connecting up with three core flexible copper coductor cable of suitable size from ceiling rose complete. (Make:,LEGRAND MYRIUS / ANCHOR ROMA / GM ) or suitable equivalent make |
| 74 | Supply and fixing of exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, AC single Phase. 230V 50 Hz RPM 1200 , copper winding of size 300 mm sweep with, blades, and frame and louvers (Make: Almonard/ Khaitan/ Crompton) or Suitably equivalent make |
| 75 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire & PVC conduit accessories with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/recessed as required. a) 2x1.5sqmm + 1x1.5sqmm earth wire |
| 76 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire & PVC conduit accessories with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/recessed as required. b) 2x2.5sqmm + 1x2.5sqmm earth wire |
| 77 | Supply & Fixing of wiring for circuit/sub main wiring along with earth wire & PVC conduit accessories with the following sizes of FR is PVC insulated copper conductor, single core cable in surface/recessed as required. c) 2x4.0sqmm + 1x4.0sqmm earth wire |
| 78 | Material & Labour for ceiling rose, 3 Phase/PVC/polycorbonate, isolated body. |
| 79 | Material and labour for Brick walls cutting chases,pining in, making good to facing where required and pointing in cement mortor 1:3 to ends and cutting chases for concealed conduit wiring, etc., and making good,cutting exc. 10 cm but not exc. 20 cm grith. |
| 80 | Supply & fixing of sheet metal enclosures for DBs when MCBs to be used TPN with 415 V, 200 amps rated bus bar6 way double door. |
| 81 | Supply & fixing 240 Volt,10KA 'C' curve MCB of single pole 6 to 32Amps in the MCB DB complete with connection testing and commissioning. (Make Standard /Legrand/Havells) or suitable equivalent make |
| 82 | Supply & fixing 415 Volt,10KA 'C' curve MCB of TPN 40 To 100Amps in the MCB DB complete with connection testing and commissioning. (Make Standard /Legrand/Havells) or suitable equivalent make. |
| 83 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm nominal cross section in service connections stranded conductor 4 core (Make: Gloster/Nicco/ Havells/ Finolex/ Orbit/ Polycab/ Paragan) or suitable equivalent make |
| 84 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 25 sq. mm nominal cross section in service connections stranded conductor 4 core (Make: Gloster/Nicco/ Havells/ Finolex/ Orbit/ Polycab/ Paragan) or suitable equivalent make |
| 85 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 50 sq. mm nominal cross section in service connections stranded conductor 3.5core (Make: Gloster/Nicco/ Havells/ Finolex/ Orbit/ Polycab/ Paragan) or suitable equivalent make |
| 86 | Demolition of cement concrete unreinforced Concrete in ground floors and pavingc not exc 15 cm thickness (below or above ground level) |
| 87 | Supply and filling of cement concrete of where demolition work done in surface channels and drains 40mm graded aggregate. Type B2 ( 1:2:4) |
| 88 | Supply & fixing of 12 module plate with frame and metal flush box. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 89 | Supply & fixing of 16 module plate with frame and metal flush box. (Make: Anchor/ Havells/ Legrand Myrius/ Litaski/ Crabtree) or suitable equivalent make. |
| 90 | Supply & Fixing of PVC dummy blank plate to be fixed in DB. |
| 91 | Supply & fixing of Modular type single pole MCB & 32 A, 10kA. (Make: Schneider Electric, Legrand, ABB) or suitable equivalent make |
| 92 | Supply, Fixing and connecting of the system cable end termination of size 16 sqmm, 4 core including with suitable cable gland & lugs. |
| 93 | Supply, Fixing and connecting of the system cable end termination of size 50 sqmm, 3.5 core including with suitable cable gland & lugs. Please Enable Macros to View BoQ information |
