Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 2 | M & L for brick work with sub class \\"B\\" brick (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1:4 to any radius complete all as specified and directed. |
| 3 | M & L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius in CM 1:6 completed all as specified and directed. |
| 4 | Taking down cement plaster any description on brick or stone walls or RCC roofs/ceiling etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 5 | M&L for rendering 15 mm thick on fair face of brick works in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed. |
| 6 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick or concrete surface of wall and finished even and smooth with out using extra cement and mixed with water proofing compound @ 3% by weight of cement complete all as specified and directed.(Note: supply only of WPC shall be measured and paid for seperately) |
| 7 | M&L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces of ceiling and finishing the surfaces even and smooth complete. |
| 8 | M&L for preparation of newly plastered surfaces of wall and applying two coat of white wash complete all as specified and as directed. |
| 9 | M&L for preparation of old decorated surfaces of walls and apply two coats of white wash complete all as specified and directed |
| 10 | M&L for Complete Removal of existing treatment including preparation of old treated surface and applying Two coat of oil bound distemper over a coat of primer over 2 mm thick wall care putty including preparation all as specified and directed. |
| 11 | M&L for preparation of old distempered surfaces of walls and applying one coat of oil bound distemper on walls all as specified and directed. |
| 12 | M&L for preparation of old painted surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed. |
| 13 | M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of primer complete all as specified and as directed. |
| 14 | M&L Preparation of Newly Plastered surfaces of Ceiling and applying Three coats of White Wash complete all as specified and directed. |
| 15 | M&L for Preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed. |
| 16 | Taking down chowkhat or frames n exc 1.50 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 17 | Taking down chowkhat or frames exc 1.50 Sqm and n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and directed |
| 18 | Hacking out old broken glass (any thickness, size quality or description) form wooden frames or steel,Alu, concrete or brick surrounds glazed with oil putty or fixed with beads complete all as specified and directed. |
| 19 | S&F 3.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 20 | S & F for solid PVC door frame of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, supplied and fixing in opening as specified and shown on drawing made on section 8 of SSR 2010 Part-II complete all as specified and directed |
| 21 | S & F factory made solid panel PVC door shutter 30 mm thick style consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, S & F in the frame as per specifications and shown on drawing in section 8 of SSR-2010 Part-II complete all as specified and directed |
| 22 | S&F in repair 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin anodised type B-21 complete all as specified and directed. |
| 23 | S&F in repair 150 mm size extruded aluminium alloy handles fabricated type anodised of complete all as specified and directed. |
| 24 | S&F in repair 150 mm long aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 25 | M&L in repair 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work incl taking down old cupboards etc. complete all as specified and directed. |
| 26 | S&F 6 mm thick teak wood liping 12 mm width prelaminated particle board fixed with screws complete all as specified and directed. |
| 27 | S & F in repair Continuous (piano) hinges, 40 mm width of mild steel, bright finish or electrogalvanisd complete all as specified and directed. |
| 28 | S&F in repaur Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 29 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 30 | M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed. |
| 31 | M&L for prepararion of old painted surfaces of steel over 10 cm width or girth and applying two coats of synthetic enamel paint on surfaces complete all as specified and directed. |
| 32 | Providing and fixing factory made uPVC white colour casement ( Openable) Door made of extruded profiles with wall thickness of 2.3 mm (+-0.2 mm) window profile with hollow section with multi chamber . Frame (60 mm × 58 mm) sash (60 mm × 78 mm). T- Profile (one vertical length in two shutters)(60mm x 74mm) Glazing bead (35 mm × 20 mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 +- 0.2 mm thick galvanized steel Frame (28 mm × 21.5 mm) sash (31mmx27mm) T- Profile(27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm × 100 mm long fasteners. HARDWARE: (Casement door handle made of zinc alloyed (white coloured coated),corner striker,secondary striker,cylinder,Door transmission gear made of mild steel with multi point locking system with strikes,3D Hinges of Zinc alloyed(white powder coated) and 5mm thick glazing with selected quality glass (Note: The unit rate quoted by contractor include cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) |
| 33 | S&F factory made uPVC white colour Sliding window Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and including 5mm thick glazing with selected quality glass & required accessories. (Note: The unit rate quoted by contractor includes cost of glass and includes all other connected accessories. |
| 34 | Providing and fixing factory made uPVC white color Sliding window Two track made of extruded profiles with wall thickness of 2.3mm (+- 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 62mm). sash (42mm x 67mm). Sliding Interlock (One vertical length in each shutters) (45.5mm x 28mm). Glazing bead (24.5mmx 16mm) will he mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel frame (30mm x 21.5mm), Sash (30mm x 18mm), profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners. Hardware : [Touch Lock of zinc alloyed (white powder coated), steel roller system including 5mm thick glazing with selected quality glass, aluminum track on bottom rail for two track sliding frame, wool pine for Sliding sash and interlock.] (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose) (A) Area not exceeding 2.00 sqm each |
| 35 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately).Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shallbe accepted but no extra payment on this account shall be made. |
| 36 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4 mm fixed with stainless steel wire staples or with necessary beads complete all as specified and directed. |
| 37 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 38 | M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in filling of floor etc and mass concrete complete all as specified and directed. |
| 39 | M&L for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even and rough to receive the topping layer complete all as specified and directed. |
| 40 | Dismantling floor, hearth or wall tiling including cement mortar bedding etc (but not backing) and removing rubbish off the premises complete all as specified and directed. |
| 41 | M/L Vitrified Ceramic tiles 8 to 10 mm thick (square/ rectagular) dark/light colour shade polished,area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 42 | M&L for machine cut kota stone slab flooring 20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 43 | M&L for machine cut kota stone slab 20mm thick as in dado, riser, steps and the likes laid over and including rendering 15mm thick in CM 1:4 for bedding layer complete all as specified and as directed. |
| 44 | M&L for Non skid ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 20 mm thick screed bed in cement mortor 1:6 complete all as specified and directed. |
| 45 | M&L for glazed ceramic coloured tiles 300 x 450 x 7 mm thick on vertical surface such as dado /skirting / risers to steps etc jointed in neat cement slurry and pointed in white or coloured cement to match surface of tiles over and including rendering 10 mm thick in cement mortor 1:4 complete all as specified and directed. Note- (i) The size of tiles (except thickness) may be varied during execution without any price adjustment. |
| 46 | M&L for RCC 1:2:4 (Nominal mix) type B-1 as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed |
| 47 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. |
| 48 | S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips |
| 49 | M&L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and incl 15 mm thick screed bed in cement mortor 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 50 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 51 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store for 15mm bore of pipe complete all as specified and directed. |
| 52 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 20mm bore of pipe complete all as specified and directed. |
| 53 | Taking up & down GI steel tubing & connections including cleaning for refixing or removal to store 25mm bore of pipe complete all as specified and directed. |
| 54 | S & F 15 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified |
| 55 | S & F 20 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified |
| 56 | S & F 25 mm bore 3 layer PP-R pipes SDR 7.4 & SDR 11 UV stablised and anti microbial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded PP-R fittings complete to walls, ceilings or in floors complete all as specified |
| 57 | Making connection of PPR distrubtion bracnch with PPR main of following outer dia of pipe 16 to 40mm size by providing and fixing tee including cutting and making fusion joint etc |
| 58 | Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete. |
| 59 | S&F in repair bib tap fancy type cast copper alloy chromium plated with crutch or butterfly handle fixed to 15 mm dia GI tube/CPVC pipe all as specified and directed. |
| 60 | S&F in repair 15 mm fancy type pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ‘Hot’ or ‘cold’ with long screwed shanks and fly nuts screwed for iron/CPVC pipe and fixed complete as directed by Engineer-in-Charge. |
| 61 | S&F in repair 15 mm fancy type stop valve/angle valve cast copper alloy chromium plated screwed high pressure with crutch or butter fly handle screwed both ends for iron or union and fixed to 15 mm GI tube complete all as specified and directed by Engineer-in-Charge. |
| 62 | S&F in repair 25mm dia ball Brass valves, high pressure, with polythene float and fly nut complete, screwed for iron pipes or brass ferrule and fixed as in PVC Service tanks all as directed. |
| 63 | S & F in repairs 25mm bore gun metal gate valves with iron wheel head screwed both ends for iron pipe and fixed. |
| 64 | S&F in repairs PVC connection 15mm size with PTMT nuts, of 450mm length complete all as specified and directed. |
| 65 | S & F in repairs, vitreous china wash basin, white, flat back, size 550x400mm with brackets, inc.cutting for fixing & pinning in ends of brackets complete all as directed by Engr-in-Chrg |
| 66 | S&F in repairs viterious china squatting pan orissa pattern size 580x440mm white integal foot rest including concrete bedding & including P or S trap 100mm complete all as directed by Engr-in-Chrg |
| 67 | S & F in repairs Vitreous China urinals, bowl type flat back size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including PVC waste pipe etc complete all as sapecified and directed. |
| 68 | S&F in repair PVC low level flushing cistern (white) 10 Ltrs capacity with inlet, ball valve, float and handle internal fitting, push button operated type with and including brackets etc complete. |
| 69 | S & F in repair Kitchen sink made of stainless steel 1 mm thick with plug washer and waste pipe incl bedding fixing cantilever brackets and connetction union to pipe overall size 915 X 460mm bowl size 405X 355 mm complete all as specified and directed |
| 70 | S&F PVC (SWR) floor trap 75 mm dia palin with grating including jointing with solvent cement with waste hole of PTMT Minimum weight 40 gms complete all as specified and directed. |
| 71 | S&F in repair CP brass towel rail `D’ type 60Cm long fixed to wall all as spd and directed by Engr-in-Charge |
| 72 | M&L 32mm dia bore Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc.with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs |
| 73 | S&F Bevelled edge mirror of size 600x450mm of selected quality glass 4mm thick mounted on 6mm thick AC building board or commercial ply wood and fixed with wooden plugs with chromium plated screws including taking down existing mirror . |
| 74 | Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete,PVC ) set in cement mortor for any size & type complete all as specified and directed. |
| 75 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed. |
| 76 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed. |
| 77 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 78 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 79 | S&F PVC (SWR) bends any radius of 75 mm bore with out access door complete all as specified and directed. |
| 80 | S&F PVC (SWR) bends any radius of 110 mm bore with out access door complete all as specified and directed. |
| 81 | S&F PVC (SWR) bends any radius of 75 mm bore with access door complete all as specified and directed. |
| 82 | S&F PVC (SWR) bends any radius of 110 mm bore with access door complete all as specified and directed. |
| 83 | S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed. |
| 84 | S&F PVC (SWR) vent cowl 100 mm bore complete all as specified and directed. |
| 85 | Dismantling PVC water tanks exc 500 ltr but not exc 1000 ltr capacity and removing to store complete all as specified and directed. |
| 86 | S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylin-drical vertical with closed top) hoisted and fixed in position all as specified complete |
| 87 | Taking down existing water proofing treatment/membrane of any type and Cleaning the surface of roof, palstered surfaces etc by roughening, picking, sweeping clean and washing down with water to remove all loose dirt etc and preparing the surface to receive plaster and brushing neat cement slurry @ 3.00 Kg of cement per Sqm complete all as directed by Engr-in-Chrg |
| 88 | M&L for rendering 15 mm thick surface as in roof with integral water proofing compound @ 3% by the weight of cement in CM 1:4 complete all as specified & directed. (Integral WPC will be measured and paid separately). |
| 89 | M&L for water proofing treatment to roof surface complete all as specified & directed by Engr-in-Charge laid with following course of descrition below :- :- (a) Apply evenly bituminous based primer confirming to IS: 3384-1965 @ 0.30 kg/sqm. (b) APP modified bituminous membrane 3mm thick with non woven polyester core of weight not less than 3.2 to 3.5 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions. (c) Applying bituminous based aluminium paint @ 0.20 Kgs/Sqm in two coats over APP membrane |
| 90 | Supply only Integral Water proofing compound all as specified. |
| 91 | M&L for MS Framed work of Fe 410 W (Gde-E-250) Quality A, as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 92 | M&L for preparation of new steel or iron surfaces Surfaces over 10cm in width or girth and applying two coats of synthatic enamel paint over a coat of red oxide zinc chrome primer . |
| 93 | Demolition of cement concrete unreinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed. |
| 94 | M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 95 | M/L hard core gauge n.exc 63 mm deposited spread & levelled in layars n exc 15 cm thick watered & rammed in a true surface using broken stone or boulder . |
| 96 | M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and to be finished even and smooth with out using extra cement complete with water proofing compound @ 3% by wt. of cement all as specified and directed |
| 97 | S & F ultra plus PE, DWC ( Double Wall corrugated ) pipes confirming IS-16098 Part - 2 : 2013 pertaining structured wall plastics pining system for Non - pressure drainage and sewerage 200 mm bore pipe and fittings with non smooth surface, type B complete all as specified and directed. |
| 98 | M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed. |
| 99 | Removal of excavated materials not exc. 50 m and depositing where directed complete all as specified and directed |
| 100 | M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 225 mm internal dia of pipe complete all as specified and directed. |
| 101 | M&L for RCC, Nominal Mix (1:1.5:3) (using 20mm graded aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete |
| 102 | M&L for RCC, Nominal Mix (1:1.5:3) (using 20mm graded aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like complete all as specified and directed |
| 103 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 104 | Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings i.e removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made for conditions separately ) and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing without andulations complete all as specified and directed |
| 105 | Material and labour for cutting chasing,pinning of brick/ stone/concrete wall at any height wall cutting and chases for concealed wiring for 20/25 mm PVC conduit dia pipe,water tubing,etc and making good to facings where required and pointing in cement motor 1:3 to ends or edges of landigs,wall surfaces etc,cutting not exc 10 cm girth and including making good the disturbed surfaces to match with existing surface and colour shade with proper putty for smooth finishing with existing wall complete all as specified and directed |
| 106 | Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables drawn through and including PVC Conduit 20 mm dia medium grade(MMS) and including cutting, chasing work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of and including white/Silver/Dark bronze colour modular blanking plate as per number of switch modules flush mounted for fixing of modular switches,sockets,fan regulators, blank plate etc and including above mentioned colour modular plate cover of required modules and including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour shade with putty for smooth finishing complete all as specified and directed for the following:- (a) One light point controlled by one switch. |
| 107 | All as above item No. 106 but for One fan point controlled by one switch and one regulator. |
| 108 | All as above item No. 106 but forOne exhaust fan point controlled by one switch . |
| 109 | All as above item No. 106 but forOne 5 pin 6 amps socket point controlled by one 6 amps switch on independent board . |
| 110 | All as above item No. 106 but for One 5 pin 6 amps socket point controlled by one 6 amps switch on same board . |
| 111 | All as above item No. 106 but forOne light point controlled by two 2 way switches. |
| 112 | All as above item No. 109 & 110,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:- (a) One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board. |
| 113 | All as above item No. 109 & 110 but for One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board. |
| 114 | All as above item No. 109 above ,but point wiring with 4.0 sqmm and earth conductor of size 4 sqmm complete all as specified and directed. |
| 115 | Supply & fixing modular type switch 10 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. |
| 116 | Supply & fixing modular type switch 10 Amps ,2way,single pole,1 module,240V,AC, ISI Marked complete all as specified and directed. |
| 117 | Supply & fixing modular type switch 16 Amps, single pole,1way,1 module,240V,AC, ISI Marked complete all as specified and directed. |
| 118 | Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked complete all as specified and directed. |
| 119 | Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2 module,240V,AC ISI Marked complete all as specified and directed |
| 120 | Supply & fixing modular type step fan speed regulator 120W, 2 module,230volts,AC, 360 degree rotation 0 to 4/5 steps, ISI Marked complete all as specified and directed. |
| 121 | Supply & fix angle lamp holder, insulated body with back plate for batten fittings complete all as specified and directed. |
| 122 | Supply & fix ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed |
| 123 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 124 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 125 | Supply only, fixed in repairs recess mounting 2'x2' LED 36 Watt light fitting slimmest 9 mm thin in class LED ceiling panel with best in class aesthetick white powder coated frame blended seamlessly with ceiling layout suitable for 600X600mm mudular ceiling grid and also can be suspended with provided kit and including connecting up with ceiling rose to fitting and including removing old unserviceable item complete all as specified and directed complete all as specified and directed. |
| 126 | S&F sensor based LED street light fitting sensor based 70 watts 230V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrision resistant icluding thermal management in multiple optics complete with IP65/66 protection complete all as specified and directed complete all as specified and directed. |
| 127 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 128 | Supply & fixing and sheet metal enclosure with acrylic door type, double door ,415 volts AC,VTPN DB, 4 way,8+12 modules, flush mounting with 200amps copper busbar, 2 neutral/earth bars links and MCCB incomer, and MCB SPN/SP/TPN as outgoing and complete for IP43&54 DBs protection and including removing old unserviceable DBs and incl making good the disturbed surfaces to match with existing surface and colour shade complete all as specified and as directed.Make:-Legrand Cat No.5077 30 4 way or equivalent make in ABB/Havells |
| 129 | Supply & fix and sheet metal enclosure,AD/DD 240 volts AC,SPN,DB, 8 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protection nd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed. Make:- Legrand/Hager/Havells or as approved make |
| 130 | Supply & fix and sheet metal enclosure 2 mm thick,AD/DD 240 volts AC,SPN,DB, 4 way, flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer,MCB SPN/DP, and MCB SP as outgoing for IP 43& IP54 DBs protectionnd including removing old unserviceable DBs making good the disturbed surfaces to match with existing surface and colour shade acomplete all as specified and as directed.Make:- Legrand/Hager/Havells or as approved make |
| 131 | Supply & fix MCB SP 6 to 32 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz , ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make |
| 132 | Supply & fix and MCB SPN 32 - 40 Amps 10 KA,\\"C\\" series,AC,240Volts,50Hz, ISI marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make |
| 133 | Supply only in repairs MCB FP, 63 Amps 10 KA,\\"C\\" series,AC,415Volts,50 Hz,ISI Marked and including removing old unsv items complete all as specified and directed.Make:- Legrand/Hager/Havells or as approved make |
| 134 | M & L for sub main wiring complete with 4 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Four run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 135 | M & L for sub main wiring complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 136 | M & L for sub main wiring complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv sub main wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 137 | M & L for sub main wiring complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade, ISI marked,FRLSH type (conforming to IS-694/1990 as amended) PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit ISI marked medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4.0 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade, ISI marked,FRLSH type as earth continuity conductor connected to common earth dolly and including removing old unsv submain wiring and making good the disturbed surfaces to match with existing surface and colour shade and complete all as specified and directed.Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4.0 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as one unit. |
| 138 | Supply and fix suitable for flush mounting sheet steel enclosure metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts suitable for AC's/Geysers complete all as specified and directed.Make:- Legrand / Hager/ Havells or as equivalent approved make |
| 139 | Supply and fix MCCB, 100 Amps,4 pole,415 Volts , 16/18KA thermal magnetic type with necessary lugs,thimbles, nuts bolts and washers and including removing old unserviceable item from existing loaction complete all as specified and as directed. Make:- Legrand / Hager/ Havells or as equivalent approved |
| 140 | Taking down old unserviceable ceiling fans of any type/sweep from work site and deposit to MES store yard Supply and fixing ceiling fans complete with blades, down rods, and connected accessories, 230 V, 1200/1400mm sweep, antidust -dustproof painted type,high speed,down rod. Star rated with induction motor complete all as specified and directed.Make:-Havells/ Orient/Atomberg/crompton or as approved. |
| 141 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard Supply and fix new exhaust fan, steel /PVC body AC single phase.230Volts of size 300 mm sweep with blades and frame with louvers complete all as specified and directed.Make:-Havells/Crompton or as approved make |
| 142 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 380 mm sweep with blades and frame with louvers.Make:-Havells/Crompton or as approved make |
| 143 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply and fix exhaust fan, steel body AC single phase.230Volts of size 450 mm sweep with blades and frame with louvers.Make:-Havells/Crompton or as approved make |
| 144 | Taking down old unserviceable exhaust fans of any type/sweep from work site and deposit to MES store yard for safe custody and Supply anf fixing exhaust fan made of sturd engineering plastic complete with louvers shutters, voltage 230v,50hz,rpm 1200 copper winding of sweep 250 mm.Make:-Havells/Crompton or as approved make |
| 145 | Supply and fix air circulator heavy duty turbo force wall mounted,metal body type fan 230Volts single phase oscillating 450 mm sweep and all connected accessories and including providing hanging heavy duty GI plate/clamp, nuts, bolts and washers complete all as specified and directed. |
| 146 | Supply, install,commissioning and testing of commercial Aircurtain unit of size 28\\"x78\\" for prevention of dustand conditionedair losses, singlephase, 220 V, 50HZ, made out of MS/CRCA sheetof minimum thickness 18gauge finished with two coats of red oxide primerand final coat of synthetic enamel paint (ovenbaked) with MS -CRC 18 gauge square perforated suction grills,Aluminium alloyfans and singlephase electric motor,nozzlesetc, complete with fittings and accessories so as to produce 1 - 1.5m/sec air velocityat floor level fordoor opening as specified. Make - Havells/Usha/Crompton or as approved make. |
| 147 | Taking down old unserviceable geyses of any capacity from work site at any height and deposit to MES store yard for safe custody and Supply and fix new electric water heater, storage type steel body/plastic body with copper inner tank and heating element upto 2 KW capacity 25 litres, BEE 5 star rated complete with all accessories such as safety valve,thermostat, NRV, Hot water and Cold water heavy duty connection pipes-02 Nos,holefasterns-04 Nos and necessary accessories as per site requirement etc.complete all as specified and directed.Make:- Havells/Crompton/Racold/Venus |
| 148 | Material and labour for Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed. |
| 149 | Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 35 sqmm 3.5 core all as specified and directed.Make- Havells/Finolex/Polycab/Gloster |
| 150 | Material and labour for PCC 1:2:4 type B1 using (20 mm graded stone aggregate) for making good cutting portion coping of pole and filling of foundation etc including necessary use and waste of form work complete all as specified and directed.Note:- Top surface of pole coping to making smooth finishing and white washing made by the contractor cost deemed into quoted rete only. |
| 151 | Material & labour for GI pipe 50 mm \\"light grade\\" laid in trenches floors/on , pole/road for cable protection with all fittings complete all as specified and directed.Make:- Jindal/Tata/swastik/BST |
| 152 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed. |
| 153 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 154 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 155 | Supply and laying (inner antimicrobial), outer UV stabilized, ISI Marked IS-15801,PP-R Pipes,SDR 11(PN-10) and PPR plain fittings in trenches/walls/ceilings or laying in floors complete of size outer dia 25 mm including all fittings |
| 156 | Supply and fixing PPR gate valve(Brass insert) of dia 25 mm |
| 157 | Making connections of PPR pipes distribution branches with PPR main of following sizes of 50 to75 mm by providing and fixing tee including cutting and making fusion joint etc |
| 158 | Excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying of cables, pipe lines, protection pipes and foundations etc and getting out in soft loose soil complete all as specified and directed. |
| 159 | Returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed |
| 160 | Removing excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed |
| 161 | Supply and fixing, install, new wall split indoor & outdoor complete with cordless remote control unit of capacity 1.8 TR TO 2.2 TR and with in built air ioniser and plasma filter for better indoor air quality with copper condenser complete,dual/swing inverter type compressor complete with cordless remote control unit with suitable batteries and remote holder and complete indoor and outdoor units and standard accessories ie necessary copper tube as per sile requirement Heavy duty MS stand for out door unit indoor unit plug top holefastners necessary suitable three core PVC sheathed copper conductor for inter connections indoor and out door units, heavy suty drain pipe from indoor unit to outside bldg with minimum 4 star rating and EER 3.2 of capacity complete all as specified and directed |
| 162 | Supply and fixing install, new wall split indoor & outdoor complete with cordless remote control unit of capacity 1.5 TR and with in built air ioniser and plasma filter for better indoor air quality with copper condenser complete dual/swing inverter type compressor, complete with cordless remote control unit with suitable batteries and remote holder and complete indoor and outdoor units and standard accessories ie necessary copper tube as per site requirement Heavy duty MS stand for out door unit indoor unit plug top holefastners.necessary suitable three core PVC sheathed copper conductor for inter connections indoor and out door units, heavy suty drain pipe from indoor unit to outside bldg with BEE 5 star rating and EER 3 2 of capacity complete all as specified and directed. |
| 163 | Supply and fix Voltage stabilizer for automatic operation angle phase digihal display type. Each naturally air pooled indoor type & designed for input vanation between 900 volts to 300 volts with output voltage stabilized at 230 volts to 250v with accuracy olt 2.5% and of capacity 50 KVA complete all as specified and directed: Make :- Sen & Pandit/ V-Guard/ Vinitec Electronic or any approved make |
| 164 | Supply and the Voltage stabilizer for automatic operation, single phase digital display type ach naturally air cooled indoor type & designed for input variation between Bovo 300v with output voltage stabilized at 230v to 250v volts with accuracy of 2.5% and of capacity 4 KVA complete all as specified and directed: Make :- Sen & Pandit/ V-Guard/ Vinitec Electronic or any approved make |
| 165 | Supplying and laying of CPVC /UPVC pipes SDR 11 & Plain SDR 11 inc al mengs (bens, Tee M long bend, coupling short pieces etc) of outer dia 32-40 mm laying in floors/ in walls/ in trenches etc with clamping complete all as specified |
| 166 | Supply only heavy duty MS wall bracket suitable for thing of out door unit of soit type AC's Each with necessary nuts, bolls & washers complets as specified and rented Make As per sample Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
