Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | SCHEDULE \\"A\\" : |
| 2 | Item No 01 : Demolition of un-reinforced Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified. |
| 3 | Item No 02 : M&L 25mm thick PCC 1:2:4 type B0 (12.50mm graded crushed stone aggregate) as in floors, finished even & smooth rough finish in patches complete all as specified and directed. |
| 4 | Item No 03 : Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removal of debris to out side MD land complete all as specified and directed. |
| 5 | Item No 04 : M&L Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over & including 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of floor complete all as specified and directed. |
| 6 | Item No 05 : All as per above item but in skirting with rendering 10mm thick CM 1:4 complete all as specified and as directed. |
| 7 | Item No 06 : M & L non skid ceramic joint free tiles 7 to 8 mm thick ( square / rectangular), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of coloured tiles, laid over and including 15 mm thick screed bed or bedding layer of mortar with CM 1:4 complete all as specified and directed. |
| 8 | Item No 07 : M&L for glazed ceramic tiles colour 350x250x7mm /450x350x7mm thick in vertical surfaces such as skirting, dado and risers to steps set and jointed in neat cement slurry and pointed in coloured cement to match with the shade of coloured tiles, laid over and including 10mm thick cement mortar 1:4 on fair faces of brick work or concrete surfaces as backing for tiles complete all as specified. |
| 9 | Item No 08 : Taking down cement plaster etc on brick walls/ concrete (ceiling) surfaces of any descriptions including racking out joints, hacking for keys, scrubbing down with water and disposal of unserviceable materials to out side of MD land complete all as specified & directed. |
| 10 | Item No 09 : M&L Rendering 15 mm thick on fair and external faces of brick work or concrete surfaces in cement mortar (1: 4), mixed with liquid water proofing compound as per Manufacturer's' instructions, surface finished even and smooth without using extra cement complete all as specified & directed. ( Note : Liquid water proofing compound will be measured and paid for separately against relevant item of BoQ as \\"Supply only\\".) |
| 11 | Item No 10 : Supply only integral water proofing compound ISI Marked, of make as approved by GE complete all as specified & directed. |
| 12 | Item No 11 : M & L for 15 mm thick rendering on fair and internal faces of brick work or concrete surfaces in CM(1:6), finished even and fair without using extra cement complete all as specified & directed. |
| 13 | Item No 12 : M&L for preparing new plastered or unplastered surfaces of wall and applying three coats of white wash complete all as specified and directed. |
| 14 | Item No 13 : M & L for rendering 5 mm thick in C:M 1:3 on Ceiling in patches, finished even and fair without using extra cement complete all as specified and directed. |
| 15 | Item No 14 : M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 16 | Item No 15 : Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-castconcrete articles complete all as specified and directed. |
| 17 | Item No 16 : M&L for brick work with sub class 'B' fly ash bricks, straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified & directed. |
| 18 | Item No 17 : Ditto all as per Srl item No. 16 above but except brick ( Note : Serviceable bricks retrieved against dismantling shall be re-used.) |
| 19 | Item No 18 : Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, of size 15mm bore of pipe complete all as specified and as directed. |
| 20 | Item No 19 : Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, of size 20mm bore of pipe complete all as specified and as directed. |
| 21 | Item No 20 : Taking up or down steel tubing and connections, including cleaning for refixing or removal from site, of size 25mm bore of pipe complete all as specified and as directed. |
| 22 | Item No 21 : Supply & laying of CPVC pipes 16 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed. |
| 23 | Item No 22 : Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed. |
| 24 | Item No 23 : Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and as directed. |
| 25 | Item No 24 : Providing and fixing CP brass Wall Mixer with provision for over head shower with 115mm long bend pipe on upper side connecting legs and wall flange etc complete all as specified and directed. |
| 26 | Item No 25 : M & L for cutting chases, pinning in brick walls/ stone concrete block or slab walls , making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings , steps, cills, sunshades, shelves, lintels etc; and cutting chases for concealed water tubing etc and making good , cutting not exceeding 10 cm girth complete all as specified and as directed. |
| 27 | Item No 26 : Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, head, shoes, bends, swan-necks atc., including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified. |
| 28 | Item No 27 : Supply and fix, in repair, 75mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ laid in trenches, with & including necessary clamps of requird size etc complete all as specifed & directed. |
| 29 | Item No 28 : Supply and fix, in repair, 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls/ laid in trenches, with & including necessary clamps of requird size etc complete all as specifed & directed. |
| 30 | Item No 29 : S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 31 | Item No 30 : S&F PVC (SWR) bends ISI marked any radius of 75mm bore complete all as specified and directed. |
| 32 | Item No 31 : PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed. |
| 33 | Item No 32 : Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar (1:3) complete all as specified and directed. |
| 34 | Item No 33 : S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed. |
| 35 | Item No 34 : S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe with access door complete all as specified and directed. |
| 36 | Item No 35 : S&F PVC (SWR) junction single, (single T) equal or unequal, of 75 mm bore of pipe complete all as specified and directed. |
| 37 | Item No 36 : S&F PVC (SWR) junction single, (single T) equal or unequal, of 75 mm bore of pipe with access door complete all as specified and directed. |
| 38 | Item No 37 : S & F PVC (SWR) branch piece 110mm bore, single (single Y) equal or unequal, complete all as specified and directed. |
| 39 | Item No 38 : PVC (SWR) floor trap / Nahani trap with grating 75 mm dia including jointing with solvent cement complete all as specified and directed. |
| 40 | Item No 39 : Supply & fix, in repair, kitchen sink with drainage board made of stainless steel 1.0mm thick with plug, washers with and including 32 mm dia PVC rigid waste pipes and C.P coupling including fixing cantilever brackets of suitable shape & size as required at site and connecting unions to pipe, overall size 915 mm x 460mm, bowl size 410 mm x 330 mm x 160mm and necessary cutting to slab complete all as specified & directed. |
| 41 | Item No 40 : Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area n.exc 1.50 sqm each and removal complete all as specified & directed. |
| 42 | Item No 41 : Taking down Chowkhats or frame with shutter (without taking off shutter from the frame) area exc 1.50 sqm but n.exc 4 sqm each and removal complete all as specified & directed. |
| 43 | Item No 42 : Taking down Shutter exc. 1 sqm but not exc. 2 sqm each complete all as specified and directed. |
| 44 | Item No 43 : M&L for providing PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary farmwork etc. complete all as specified and directed. |
| 45 | Item No 44 : M&L for pressed steel door frame size 125 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 46 | Item No 45 : M&L for pressed steel door frame size 105 mm x 60 mm and 1.25 mm thick including necessary fixing lugs, hinges, lock strike plate etc., complete all as specified and directed. |
| 47 | Item No 46 : M&L for factory made second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified & directed.Notes:- (i) glazing will be measured and paid for separately.(ii) Butt hinge will be measured and paid for separately . |
| 48 | Item No 47 : M&L for factory made 35mm thick second class (Indian Sal, Bijasal, Hollock or Benteak) hardwood plain, framed, panelled shutter (two or three panels) with lock rail and panel of 9mm thick B.W.Pcommercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stiles as per IS: 1003 (Part-I), kiln seasoned complete all as specified & directed. |
| 49 | Item No 48 : S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ indow/Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 an d resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.speicifed Make : Rajshree or equivelent |
| 50 | Item No 49 : S&F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC “C” channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail & bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement and fixing in the frame at site complete all as specified and directed. |
| 51 | Item No 50 : S&F 100 mm long aluminium alloy type C-22 butt hinges with galvanised MS hinge pin etc. complete all as specified and directed. |
| 52 | Item No 51 : S&F 150 mm long aluminium anodised barrel tower bolt and 12 mm dia fixed complete all as specified and directed. |
| 53 | Item No 52 : S&F 100mm Butt hinges, heavy weight, cold rolled mild steel and fixed complete all as specified and directed. |
| 54 | Item No 53 : Supply & fix 250mm long aluminium alloy, anodised sliding door bolts with hasp & staple (bolt type) & fixing clips of sheet, cast or extruded section and fixing bolts & sliding bolts of extruded section or cast aluminium alloy complete all as specified & directed. |
| 55 | Item No 54 : Supplying & fixing 150mm size ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete all as specified & directed. |
| 56 | Item No 55 : S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars and similar work conforming to Fe- 290 ( Gde-E-165) complete all as specified and as directed.Note: The unit rate quoted by contractor is deemed to be inclusive of cutting to dead lenth where required, notching, drilling, fitting, rivetting and/or welding or connecting with bolts and nuts (including rivets or bolt and nuts). No claim whatso ever shall be entertained by Govt on this account. |
| 57 | Item No 56 : S&F powder coated ( minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.(Notes : (i) Unit rate quoted against this item includes for provision of PVC protected sheeting and its removal after fixing the frame work. (ii) Hinges and lugs shall be measured and paid for separately. (iii) Weight of joining cleat shall be added to main frame.) |
| 58 | Item No 57 : S&F powder coated ( minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long ( 1 No), hinges type B-21 100 mm long (2 No) suitable handle (1 No) complete all as specified and as directed. |
| 59 | Item No 58 : S&F 4mm thick sheet glass ordinary quality and galzing with necessory rubber beading of any size complete as in aluminium windows/ventilators complete all as specified and directed. |
| 60 | Item No 59 : S&F 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqmtr each pane complete all as specified and directed. |
| 61 | Item No 60 : S&F stainless steel wire cloth, 0.56mm nominal dia of wire average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 62 | Item No 61 : S&F in repair 18mm rigid prelaminated coloured solid PVC sheet suitably fixed in MS angle frame work as in cup board , Cabinate ,Drawer etc as per manufacturer specification and drawings complete all as specified and directed.(Note :- Mild steel frame work shall be measured and paid for separately.) |
| 63 | Item No 62 : S&F continuous (piano) hinges, mild steel bright finish or electro galvanised width of flaps (when open) n.exc. 36mm complete all as specified and directed. |
| 64 | Item No 63 : S&F 150 mm size aluminium handles, cast type, polished bright complete all as specified and directed. |
| 65 | Item No 64 : S&F magnetic stopper suitable for cupboard, dressing table fixed with screws complete all as specified and directed. |
| 66 | Item No 65 : M & L for 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished, complete all as specified and directed. |
| 67 | Item No 66 : M&L for preparation of new surfaces of wood or wood based materials of any description over 10 cm width or girth and applying two coat synthetic enamel paint of colour as approved by GE over and including a coat of pink primer complete all as specified & directed. |
| 68 | Item No 67 : M&L for preparation of new surfaces of iron/ steel of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer as approved by GE complete all as specified & directed. |
| 69 | Item No 68 : M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed. |
| 70 | Item No 69 : M&L for preparation of old painted surfaces of wood or wood based materials of any description over 10cm width or girth and applying two coat of synthetic enamel paint complete all as specified & directed. |
| 71 | Item No 70 : M&L for 40mm bore low density polythelene pipes(LDPE) with fittings of pressure rating 6kgf/sqcm fixed to walls or in floors etc complete all as specified and directed. |
| 72 | Item No 71 : S&F in repair 20mm Harrison rails, curtainrod, anodised aluminium alloy, chromium plated with fixing brackets, stops, rollers etc |
| 73 | Item No 72 : Supply and fixing C.P. brass Over head Shower Dia 125mm with 15mm C.P. brass Shower Arm Casted 190mm long flat shape for wall mounted shower with flange etc complete all as specified and directed. |
| 74 | Item No 73 : S & Fin repair 15mm C.P. brass bib cock with wall flange complete all as specified and directed. |
| 75 | Item No 74 : S & F in repair for Stop valves/angle cock cast copper alloy chromium plated fancy type screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed , 15 mm fixed complete all as specified and directed. |
| 76 | Item No 75 : S & F in repair for Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 77 | Item No 76 : S & F in repair for Grating doom 100 mm dia of chromium plated (Minimum weight 25gms) fixed complete all as specified and directed. |
| 78 | Item No 77 : S & F in repair Shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gm). |
| 79 | Item No 78 : S & F in repair for Soap dish, SS fixed to plugs with chromium plated brass screws fixed complete all as specified and directed. |
| 80 | Item No 79 : S&F in repair CP brass tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed. |
| 81 | Item No 80 : S & F for PVC connections 15 mm size with PTMT nuts of length 600mm fixed complete all as specified and directed. |
| 82 | Item No 81 : Supply & fix vitreous china squatting pan, Orissa pattern of size 580x440 mm white, with integral foot rest and PVC 'P' or 'S' trap including connection to trap, and to flush pipe, etc (excluding flushing pipe) and making good the disturbed surface of floor complete all as specified & directed. |
| 83 | Item No 82 : Supply & fix, in repairs, vitreous china white WHB (550 x 400 mm) flat back with CP waste coupling, waste pipe, brackets including cutting for and pinning in ends of brackets complete all as specified and directed. |
| 84 | Item No 83 : Supply and fix, in repair, 10 ltr capacity PVC valve less syphonic action type flushing cistern low level 'white' with inlet ball valve, float valve & handle Including 32mm bore PVC flush pipe & brackets and brackets fixed to wall complete all as specified & directed. |
| 85 | Item No 84 : M & L Granite (Black/Ruby Red ) work (table rubbed and polished) 20 mm thick in cooking platforms bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete over and including screed bed 15 mm thick in CM 1 : 6 complete all as specified and directed. |
| 86 | Item No 85 : Supply and fix in repair mirror 5.0mm thick selected quality glass, 450mm x 600 mm size, mounted on 6 mm thick AC building board or commercial plywood with aluminium angle bead alround the mirror and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified & directed. |
| 87 | Item No 86 : S & F Door Seal rubber etc, complete all as specified and directed. |
| 88 | Item No 87 : Complete removal of existing treatment on walls including steel wire brushing and scraping etc and applying 2mm thick( Avg) Birla wall care putty in two layers on wall surfaces including rubbing, levelling and preparing the surfaces for receiving further finishes complete all as specified and directed. |
| 89 | Item No 88 : M&L for preparation of old decorated surfaces of ceiling including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed. |
| 90 | Item No 89 : M&L for applying two coat of distemper Oil emulsion white or tinted on new putty surfaces of wall complete all as specified and directed. |
| 91 | Item No 90 : M&L for preparation of old surfaces of wall and applying two coat of distemper Oil emulsion white or tinted complete all as specified and directed |
| 92 | Item No 91 : M&L for preparing Finishing walls with acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 93 | Item No 92 : M&L for preparing Finishing walls with acrylic smooth exterior paint of required shade : OLd work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed. |
| 94 | Item No 93 : M & L 75mm th PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 95 | Item No 94 : Providing and applying two coats of Brushbondacrylic polymer modified cementitious water proof coating after carrying out proper surface preparation including removing loose concrete, foreign materials, cleaning of concrete surface, pre-dampening of concrete surface, mixing all components of Brush bond using heavy duty slow speed drill fitted with mixing paddle followd by application of two coats using a suitable brush as per Manufacturer's instructions complete all as specified and directed. |
| 96 | Item No 95 : M&L for complete removal of existing water proofing treatment from top of roof and canopies / chajjas of building including removal of debris out side MD land complete all as specified and directed. |
| 97 | Item No 96 : M&L Water proofing treatment on roof surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer including properly cleaning & drying the concrete surface complete 10 mm thick rendering on roof surfaces/concrete surface in CM (1:3) complete. |
| 98 | Item No 97 : Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. |
| 99 | Item No 98 : APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified. as per manufacturer's instruction. |
| 100 | Item No 99 : Applying two coats of bituminous base aluminium paint @ 0.100 kg per sq metre in each coat including preparation complete. |
| 101 | Item No 100 : Use and waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified and directed. |
| 102 | Item No 101 : Use and waste for formwork to chullah hoods,chajjas, troughs and similar items including edges etc., work in rough finished flat surfaces of concrete complete all as specified and directed. |
| 103 | Item No 102 : M & L for RCC (1:2:4) Type B-1 using 20mm graded crushed stone aggregate as in roof beams, cantilevers, bressummers, lintels beam over 1.5m span complete all as specified and directed. |
| 104 | Item No 103 : M & L for RCC (1:2:4) Type B-1 using 20mm graded crushed stone aggregate as in Chajjas etc complete all as specified and directed. |
| 105 | Item No 104 : M&L for mild steel TMT bars 10 mm dia and over as in reinforcement for concrete, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 106 | Item No 105 : M&L for mild steel TMT bars 8 mm dia as in stirrups, spacers and binders for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed. |
| 107 | Item No 106 : S & F Hasp and Staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws 75 mm size, complete all as specified and directed. |
| 108 | Item No 107 : M&L for machine cut kota stone one piece slab as in flooring, 20-25mm thick over & including 15mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified & directed. |
| 109 | Item No 108 : M&L for machine cut kota stone slab as in skirting/vertical surface, 15-18mm thick over & including 10mm thick rendering in CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match with the shade of the slab including rubbing and mirror polishing complete all as specified & directed. |
| 110 | Item No 109 : Providing and injecting chemical emulsion for Post Constructional Anti Termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq. metre of the vertical surface of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc.,complete all as specified & directed. |
| 111 | Item No 110 : Dismantling of water tank of any description of capacity exc. 250 litres but not exc. 500 litres, removing to store or from the site complete all as specified and as directed. |
| 112 | Item No 111 : Supply and fix 500 ltrs capacity rotational moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top), ISI Marked, hoisted and fixed in position complete all as specified & directed. |
| 113 | Item No 112 : S&F in repair,15 mm dia ,Pillar taps, cast copper alloy, fancy type,chromium plated,screwed down high pressure,with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. |
| 114 | Item No 113 : Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting ouany type of soil all as specified and as directed. |
| 115 | Item No 114 : Excavation over areas exc 1.5m deep and n exc 3 m getting out in any type of soil all as specified and as directed. |
| 116 | Item No 115 : Excavating over areas, n exc 1.5 m deep and getting out in any type of soil all as specified and as directed. |
| 117 | Item No 116 : Returning filling in excavated soil including spraeding, levelling, watering and well ramming in layers not Cum exceeding 25cm etc complete all as specified and directed. |
| 118 | Item No 117 : Removal of excavated materials not exceeding 50m and depositing where directed at a level not exceeding Cum 1.5 m above the starting points etc complete all as specified and directed. |
| 119 | Item No 118 : M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed. |
| 120 | Item No 119 : M&L Fly ash brick with Sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1.0 complete all as specified and directed. |
| 121 | Item No 120 : M&L DWCPE socketed drain pipes class SN-5 confirming to IS 16088 (Part-2) with 150 mm bore dia in 8m length including laying jointing to pipe complete all as specified and as directed. |
| 122 | Item No 121 : S&F 110 mm bore PVC (SWR) vent cowl |
| 123 | Item No 122 : M&L Precast Cement concrete type B-1, 1:2:4 (using 20mm graded stone aggregate) in landings, cover slabs (for manholes etc) shelves and similar article with plain faces and ser in cement mortar 1:6 complete all as specified. |
| 124 | Item No 123 : M&L for cutting holes into existing manholes for conecting new drains for 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (% round or section) in cement concrete 1:2:4 type B-1 complete all as specified. |
| 125 | Item No 124 : M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even Sqm and smooth with out using extra cement complete all as specified and directed (WPC shall be measured and paid saperately). |
| 126 | Item No 125 : Dertiolition and breaking up drain pipes of 150mm internal dia of bore SGSW, AC or reinforced concrete pipe set in RM cement mortar complete all as specified. |
| 127 | Item No 126 : Taking down carefully any type point wiring (light, fan, socket bell or power), complete with fitting such as switches celling roses, lamp holders sockets, regulators, call bell light with PVC conduit surface/concealed or wooden patterns including sunken cast iron/pressed stell terminal boxes etc and making good the disturbed surfaces of walls, roof, floors etc to match with the existing surfaces all as specified and directed by Engineer in charge. |
| 128 | Item No 127 : Taking down the ceilling fan in situ and submitting to MES store complete all as specified and directed. |
| 129 | Item No 128 : Taking down carefully main panel, main switch and distrubution boards/meter any make and size. |
| 130 | Item No 129 : Taking down carefully old unserviceable any type sub main wiring with wooder batten/PVC surface conduit of any size and making good the disturbed surfaces of walls, roof, floors et to match with the existing surfaces complete all as specified and directed. |
| 131 | Item No 130 : M/L for Sub Main Wiring two single core PVC insulated cable of size 6.0 Sqmm multistranded copper conductor two run drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 25mm dia with all conduit fitting, fixing accessories and one run of 4.0 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge. Note :- Two Nos of 6.0 Sqmm Wire and one No of 4.0 Sqmm Earth wire in One RM length measured as one unit length. |
| 132 | Item No 131 : M/L for Sub Main Wiring with two single core PVC insulated cable of size 4.0 Sqmm multistranded copper conductor drawing into and including concealed rigid non-metallic PVC conduit, medium grade not less than 20mm dia with all conduit fitting, fixing accessories and 2.5 Sqmm multistrand copper conductor cable as continuous earth wire complete all as specified and directed by Engineer in charge. Note :- Two Nos of 4.00 Sqmm Wire and One No of 2.5 Sqmm Earth wire in One RM length measured as one unit length. |
| 133 | Item No 132 : M&L for Point wiring with PVC insulated 1.5 sq mm multi stranded copper conductor cable 1100 volts grade drawn into and including concealed PVC conduit not less than 20mm (ISI marked) including all fitting and fixing accessories including sunk in cast iron/pressed steel terminal boxes for modular white bakelite sheet cover for mounting of switches, sockets, fan regulators etc and PVC insulated 1.5 Sqmm multistranded copper conductor cable as earth wire and making good the disturbed surfaces to match with the existing surfaces complete all as specified and directed by Engineer in charge.(a) One light point/Bell point controlled by one switch. |
| 134 | Item No 132(b) : One fan point controlled by one switch. |
| 135 | Item No 132(c) : One socket point controlled by one switch on same board. |
| 136 | Item No 132(d) : One socket point controlled by one switch on Independent board. |
| 137 | Item No 133 : S & F in repair for Ceiling rose surface bakelite 65 mm x 50 mm three terminal AC 230 volts flush. |
| 138 | Item No 134 : Description all as per item No 132 here in befor but with 1100 volts grade copper standard conductor cable of size 2.5 Sqmm with 2.5 Sqmm solid copper conductor PVC for 3 pin switch socket outlet 15 Amp independent board complete all as specified and directed by Engineer in charge. |
| 139 | Item No 135 : S&F in replacement of frame plate for modular switch 1 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 140 | Item No 136 : S&F in replacement of frame plate for modular switch 2 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 141 | Item No 137 : S&F in replacement of frame plate for modular switch 3 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 142 | Item No 138 : S&F in replacement of frame plate for modular switch 4 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 143 | Item No 139 : S&F in replacement of frame plate for modular switch 6 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 144 | Item No 140 : S&F in replacement of frame plate for modular switch 8 module including screws and washers etc model/make as per existing in site complete all as specified and as directed. |
| 145 | Item No 141 : S&F in replacement MS Housing box 1/2 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed. |
| 146 | Item No 142 : S&F in replacement MS Housing box 3 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed. |
| 147 | Item No 143 : S&F in replacement MS Housing box 4/5 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed. |
| 148 | Item No 144 : S&F in replacement MS Housing box 6/8 module suitable for modular switch as per existing switch box and making good to the disturb surface complete all as specified and as directed. |
| 149 | Item No 145 : S&F in replacement of modular switch 6-10 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed. |
| 150 | Item No 146 : S&F in replacement of modular switch 16 Amps one module 230 volts AC as per existing model/make complete all as specified and as directed |
| 151 | Item No 147 : S&F in replacement of modular socket, 6A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed. |
| 152 | Item No 148 : S&F in replacement of modular socket, 6/16A -2/3 pin combined 2 module, 230 volts AC as per existing model/make complete all as specified and as directed. |
| 153 | Item No 149 : S&F in replacement modular fan regulator, 2 Module 4 step 180w heavy duty 230 volts as per existing model/make complete all as specified and as directed. |
| 154 | Item No 150 : Supply and fixing in repair of LED lamp holder all as specified and directed by engr-in-charge. |
| 155 | Item No 151 : Supply and fixing in replacement of decorative wall light fitting WITH LAMPS 12 WATT made up of Polycarbonate, City-1, Cylindrical shape, with LED lamp 9 Watt complete with fixing arrangements on wall all as specified and directed. |
| 156 | Item No 152 : Supply & Fixing Smart bright Batten Series, LED luminaire using LED 22 watt 110 Lumens/watt with diffuser which ensures uniform distribution and comfort, batten series features latest LEDs and delivers consistent light output, stable color start Extruded Aluminium housing, Energy efficient, Flicker free start Inbuilt driver unit, Suitable for wall and ceiling mounting using brackets with and including the luminaire testing on completion as per Standard Specification. |
| 157 | Item No 153 : S & F in repair of LED Decorative /mirror light fitting 10 watt along with fixture Surface mounted suitable for indoor application, connector block, etc. Complete with all accessories internally pre-wired and including round wood block, connecting up with three core flexible flexible copper conductor cable suitable size complete all as specified and directed by Engineer in charge. |
| 158 | Item No 154 : S&F in repair Bulk head endura LED light fitting complete with10 watt LED and making necessary electric connection to ceiling rose with copper conductor of suitable size & length complete all as specified & directed. |
| 159 | Item No 155 : Supply & fix in replacement of LED Security Light Luminaire 35 watt 6000K with high power LED cool white,CRI 75,+/- 5% supply voltage 220/240/50 Hz, light engine driver base.pole adapter,powder coated pressure die cast aluminium with heat resistant toughened glass with lens type,GI pipe 40 mm dia medium Grade not less than with 1.2 m.long in any shape with 2 nos of pole fitting clamps made out of MS flat, nuts and bolts and painting with aluminium paint complete all as specified and as directed. |
| 160 | Item No 156 : Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) |
| 161 | Item No 157 : Supply & Fixing in repair sheet metal enclosure MCB DB double door [Acrylic], single pole and neutral, 240 volts, 12 way with 200 Amp, 10 KA breaking capacity rated bus bar with blanking plate wherever required and IP-43 degree protection complete all as specified & directed. |
| 162 | Item No 158 : S & F for MCB Single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, ‘C’ curve complete all as specified and as directed. |
| 163 | Item No 159 : S & F for MCB Single pole rated capacity 5 to 40 Amps, 240 Volts breaking capacity 10 KA, ‘C’ curve complete all as specified and as directed. |
| 164 | Item No 160 : Supply & Fixing in repair single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with 01 number single pole MCB 20 Amps complete all as specified & directed. |
| 165 | Item No 161 : Earthing complete with galvanised steel earth plate electrode 60 cm x60 cm x 6 mm thick buried directly in ground ,(Earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level ,connected to and including galvanised iron earth wire 4 mm dia by means of nut, bolts, check nuts and washers of galvanised iron or steel complete all as specified and directed including testing on completion including the material and labour of the following :-(a) Excavation and earth work for drilling hole for electrode in any type of Soil. (b) PCC pit in cement concrete 1:2:4 type B-1, Pre cast RCC cover with suitable handle 40 mm thick in PCC 1:2:4 type B-1, reinforced with welded steel wire fabric weighing not less than1.87 Kg/Sq meter. (c) Funnel with watering pipe of GI 20 mm nominal bore light grade and lugs etc complete all as specified and directed (d) 15 mm nominal bore medium grade GI protection pipe 5 meter long for protection of earthing lead complete all as specified and directed. (e) Requisite quantity of common salt and charcoal. (f) Testing of earthing. |
| 166 | Item No 162 : S & F in replacement of Modular Bell push 6A 1 module AC 230 volts single pole one way complete all as specified and directed by Engineer in charge. |
| 167 | Item No 163 : Supply and fixing Single phase propeller type ventilating (Exhaust fan) heavy duty AC 230 volts 300 mm sweep, Metallic body complete with Metallic louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed. |
| 168 | Item No 164 : Supply and fixing Single phase propeller type ventilating (Exhaust fan) heavy duty AC 230 volts 300 mm sweep, PVC body complete with PVC louvers including making holes of suitable size and making good the disturbed surface and shutters including electric connection with pvc flexible twin core copper wire from ceiling rose to Exhaust fan, nut & bolt complete all as specified and as directed. |
| 169 | Item No 165 : Supplying and fixing, testing the water heater storage type 25 litres, BEE Five star Rated capacity, PVC connection 15mm size with PTMT nuts of length 450mm at after connecting electric and water connection and screwing nuts and bolts, anchor hold fast to fixed on wall and making the good the disturbed surface, complete all as required and as directed at site. |
| 170 | Item No 166 : S & install testing and commissioning wall mounted meter box of size 1050mm x 1050mm x each 200mm depth suitable to install smart meter 04 nos in separate subcompartment made out of 2mm thick CRCA sheet duly power coated, total type tested assembly panel (TTA penal) as per IEC-61439-182-2022, provisioning of transparent glass infront of meters compartment doors complete rubber gasket providing with locking arrangements for each meter door provision of 300 amp rating 4 nos copper bus bar chamber with insulating materials. power wiring using PVC insulated standed copper wire of size not less than 10 sqmm 2 single core including lugs from bus bar to meter and meter to control MCB with neutral wire linking to DP including following accessories: (a) Incommer MCCB 4 Pole 100 Amp 25 KA-01 Nos (b) Out going MCB DP 63 A 10 KA-04 Nos (c) Out going MCB DP10 A 10KA-01 Nos (for common area of block) (d) Housing for 4 nos single phase meter NOTE: Old existing meter to be installed in above panel. Taking out and refixing of old meter is deemed to be included in unit rate of items. |
| 171 | Item No 167 : S & install testing and commissioning wall mounted meter box of size 1050mm x 1050mm x Each 200mm depth suitable to install smart meter 06 nos in separate subcompartment made out of 2mm thick CRCA sheet duly power coated, total type tested assembly panel (TTA penal) as per IEC-61439-182-2022, provisioning of transparent glass infront of meters compartment doors complete rubber gasket providing with locking arrangements for each meter door provision of 300 amp rating 4 nos copper bus bar chamber with insulating materials. power wiring using PVC insulated standed copper wire of size not less than 10 sqmm 2 single core including lugs from bus bar to meter and meter to control MCB with neutral wire linking to DP including following accessories: (a) Incommer MCCB 4 Pole 100 Amp 25 KA-01 Nos (b) Out going MCB DP 63 A 10 KA-06 Nos (c) Out going MCB DP10 A 10KA-01 Nos (for common area of block) (d) Housing for 6 nos single phase meter NOTE: Old existing meter to be installed in above panel. Taking out and refixing of old meter is deemed to be included in unit rate of items. |
| 172 | Item No 168 : S & install testing and commissioning wall mounted meter box of size 1050mm x 1050mmx Each 200mm depth suitable to install smart meter 02 nos in separate subcompartment made out of 2mm thick CRCA sheet duly power coated, total type tested assembly penal (TTA penal) as per IEC-61439-182-2022, provisioning of transperent glass infront of meters compartment doors complete rubber gasket providing with locking arrangements for each meter door provision of 300 amp rating 4 nos copper bus bar chamber with insulating materials. power wiring using PVC insulated standed copper wire of size not less than 10 sqmm 2 single core including lugs from bus bar to meter and meter to control MCB with neutal wire linking to DP including following acessories:-(a) Incommer MCCB 4 Pole 63 Amp 25 KA-01 Nos(b) Out going MCB DP 40 A 10 KA-02 Nos(c) Out going MCB DP10 A 10KA-01 Nos (for common area of block)(d) Housing for 2 nos single phase meterNOTE: Old existing meter to be installed in above panel. Taking out and refixing of old meter is deemed to be included in unit rate of items. |
| 173 | Item No 169 : Supply , laying and testing cable XLPE insulated , screened , PVC bedded , galvanized , steel strip or wire armoured, electric power cables (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 3.5 core 35 Sqmm complete all as specified and directed by Engineer in charge. |
| 174 | Item No 170 : Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, laying of cables etc. n exc 10sqm on plan and n exc 1.5m in depth and getting out in any type of soil. |
| 175 | Item No 171 : M/L for Removing excavated material to a distance n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed. |
| 176 | Item No 172 : M/L for Returning , filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed. |
| 177 | Item No 173 : Supply and spreading clean and dry fine sand free from sharp materials (unwashed) laying in trenches around the cable for cushioning in trenches, laid to a uniform thickness of 23cm (15cm under the cable & 8cm over the cable) and gently punned down to 18cm thickness complete all as specified and as directed. |
| 178 | Item No 174 : Supply and laying un-reinforced precast concrete cable covers, Class HVP type-1 with peak, size 250 mm x 150 mm x 40 mm, complete all as specified and as directed. |
| 179 | Item No 175 : Supply and lay DWCP pipe OD 50 mm , ID 38 mm all as per required and directed by Engg-in-charge |
| 180 | SCHEDULE \\"A\\" (Schedule of credit )Schedule of Credit Rs 4,36,090.00 (Minus) inserted by the MES. (Note : Credit amount shall be deducted manually to arrive net amount) SCHEDULE OF CREDIT Name of Work: SPECIAL REPAIR TO JCOs/OR MD ACCN NO P-40, P-41, P-120, P-121, P-166 AND N-1 AT SUNDER ENCLAVE OF JAK RRC UNDER GE WEST JABALPUR Sl No Decription of work Unit Qty Rate Amount |
| 181 | Old chowkats or frames with shutters not exceeding 1.5 Sqm incl all fittings of any description |
| 182 | Old chowkats or frames with shutters exceeding 1.5 Sqm but n ex 4.0 sqm incl all fittings of any description |
| 183 | Old curtain rods of any descriptions |
| 184 | old WHB /cistern incl fittings |
| 185 | Old unserviceable pillar tap/bib tap/angle cock/shower |
| 186 | Old PVC connection/seat cover/waste pipe/grating/GI fittings any type and size |
| 187 | old GI tubing 15mm bore |
| 188 | old GI tubing 20mm bore |
| 189 | old GI tubing 25mm bore |
| 190 | old brick bats |
| 191 | old shutter of any description |
| 192 | old scrap iron/aluminium |
| 193 | old water tank |
| 194 | Old/UNSV point wiring (including such as switches, sockets, ceilling roses, holders) of any type and size. |
| 195 | Old/UNSV tube light fitting/Bldg security light fitting/down light fitting if any size and type. |
| 196 | Old/UNSV MCB DB/Main switch of any type and size. |
| 197 | Old/UNSV fan regulator of any size and type |
| 198 | Old/UNSV MCB/ISOLATOR of any capacity. |
| 199 | Old UNSV sub main wiring |
| 200 | Old UNSV Earthing. |
| 201 | Old US cable any size. |
| 202 | Old US GI Pipe |
| 203 | Old US Bricks Total : 436090.0 Notes :- (a) All quantities shown under column 4 are provisional and may vary during execution. Actual amount of credit shall be worked out based on rates inserted under Col. 5 of Schedule of credit. (b) Tenderers are advised to inspect the old material/ items at site and ascertain their condition. It shall be deemed that the contractor has made himself well aware and ascertained the condition of these items whether he inspects them or not. No claim whatsoever on this account shall be admissible by the Government. The mode of measurement shall be same as for the work to executed. tenderers are requested to verify the condition of the materials, any dispute arises at later stage will not be entertained. (c) The items as indicated in Schedule of credit shall be the property of the contractor. The total amount of Schedule of credit shall be deducted from total of Schedule „A' [BOQ] to arrive at Contract Sum. (d) The rates inserted under Column 5 are firm and the contractor shall have no claim what so ever against the department if the actual value of dismantled materials turns out to be different from the cost given by the department. (e) All above materials shall be recorded in MB jointly by Engineer-in -Charge and contractor. (f) No rebate on Schedule of credit shall be accepted. Signature of contractor For Accepting Officer Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
