|
| 1 | SCHEDULE `A' PART - I (Building Works) is not prepriced by MES and prepriced rates indicates 0.0 under column 6 signified this fact only. |
| 2 | Construction of OMQ's married accn block of 04 Qtrs (G+1) building including servant quarters and garrages with permanent specifications, complete all as specified and as shown on drawings. |
| 3 | Construction of OMQ's married accn block of 14 Qtrs (G+3) building including servant quarters and stilt parking with permanent specifications, complete all as specified and as shown on drawings. |
| 4 | Construction of Service toilet with permanent specifications, complete all as specified and as shown on drawings. |
| 5 | NOTE: Schedule ‘A’ Part II to XIV under Ser No 2.01 to 2.13 are Prepriced by MES. |
| 6 | Lump sum price worked out by the Contractor for “SITE CLEARANCE, EXCAVATION AND EARTH WORK” as listed in Schedule ‘A’ Part II |
| 7 | Lump sum price worked out by the Contractor for “INTERNAL WATER WORKS\\" as listed in Schedule ‘A’ Part III |
| 8 | Lump sum price worked out by the Contractor for “INTERNAL ELECTRIFICATION SUPPLY WORKS\\" as listed in Schedule ‘A’ Part IV |
| 9 | Lump sum price worked out by the Contractor for “ROAD, PATH AND CULVERT\\" as listed in Schedule ‘A’ Part V |
| 10 | Lump sum price worked out by the Contractor for “SEWAGE DISPOSAL WORKS” as listed in Schedule ‘A’ Part VI |
| 11 | Lump sum price worked out by the Contractor for “AREA DRAINAGE WORKS” as listed in Schedule ‘A’ Part VII |
| 12 | Lump sum price worked out by the Contractor for “COMPOUND WALL, FENCING AND GATE” as listed in Schedule ‘A’ Part VIII |
| 13 | Lump sum price worked out by the Contractor for “EXTERNAL WATER SUPPLY WORKS” as listed in Schedule ‘A’ Part IX |
| 14 | Lump sum price worked out by the Contractor for “DG SET WORK\\" as listed in Schedule ‘A’ Part X |
| 15 | Lump sum price worked out by the Contractor for “EXTERNAL ELECTRIC SUPPLY WORKS\\" as listed in Schedule ‘A’ Part XI |
| 16 | Lump sum price worked out by the Contractor for “LIFT WORK ” as listed in Schedule ‘A’ Part-XII |
| 17 | Lump sum price worked out by the Contractor for “RAIN WATER HARVESTING ” as listed in Schedule ‘A’ Part-XIII |
| 18 | Lump sum price worked out by the Contractor for “VERMICOMPOST ” as listed in Schedule ‘A’ Part-XIV |
| 19 | SCHEDULE `A' PART - XII MISC ITEMS is not prepriced by MES and prepriced rates indicates 0.0 under column 6 signified this fact only. |
| 20 | “INTERNAL WATER SUPPLY\\" |
| 21 | S&F stainless steel Sink Mixer with regular swinging spout (Wall mounted model) with connecting Legs and wall falnges and fixed for 15 mm bore dia of pipe. Cat part no FLR-CHR-5309N of make Jaquar or equivalent complete all as specified and directed by Engr in Charge. |
| 22 | “INTERNAL ELECTRIC SUPPLY\\" |
| 23 | S&F LED bulb, 09 watt complete all as specified and directed by Engr in Charge. |
| 24 | S&F sheet metal enclosures Vertical type doubledoor (VTPN) MCCB incomer, with Acrilic Door, cement spill protector For MCCB Triple pole and neutral, 8 ways, IP-43 protection, with 100 Amps rated bus bar breaking capacity 25KA, 415 Volts complete all as specified and directed by Engineer-in-Charge. |
| 25 | S&F sheet metal enclosures Vertical type doubledoor (VTPN) MCCB incomer, with Acrilic Door, cement spill protector For MCCB Triple pole and neutral, 4 ways, IP-43 protection, with 63 Amps rated bus bar breaking capacity 25KA, 415 Volts complete all as specified and directed by Engineer-in-Charge. |
| 26 | S & F telephone jack complete all as specified and directed by Engineer-in-Charge. |
| 27 | S & F T V Jack complete all as specified and directed by Engineer-in-Charge. |
| 28 | \\"EXTERNAL WATER SUPPLY\\" |
| 29 | Supply and Laying of Ductile iron pipe including specials class K9 Dia 150 mm complete all as specified and directed by Engr in Charge. |
| 30 | M&L construction of wall chamber of size 900x900x900mm internal size suitable for valves with PCC 1:4:8 type D 2 for foundation and brick masonry wall in cement mortar 1:6 PCC 1:3:6 type C 1 for coping rendering in CM 1:4, 15mm thick including Provn of mild steel sheet cover 3mm thick on 40x40x6mm angle iron frame work with two coats of synthetic enamel black paint over a coat of red oxide primer and locking arrangement including necessary excavation earth work in any type of soil all as specified and directed by Engr-in-Charge. |
| 31 | M&L construction of wall chamber of size 600x600x600mm internal size suitable for valves with PCC 1:4:8 type D 2 for foundation and brick masonry wall in cement mortar 1:6 PCC 1:3:6 type C 1 for coping rendering in CM 1:4, 15mm thick including Provn of mild steel sheet cover 3 mm thick on 40x40x6mm angle iron frame work with two coats of synthetic enamel black paint over a coat of red oxide primer and locking arrangement including necessary excavation earth work in any type of soil all as specified and directed by Engr-in-Charge. |
| 32 | \\"DG SET\\" |
| 33 | Supply, installation, testing and commissioning of silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete With AMF Panel,Relay panel and Switchgear for automatic starting on main failure with foundation (as per OEM design), control panel with necessary meter and sound proof canopy as per CPCB norms of capacity upto 40 KVA , insulation class H coupled to engine with suitable coupling and base frame on foundation as recommended by the manufacturer and consisting of other electrical components,auto Governor/auto voltage regulator fuel tank of capacity of not less than 12 Hr run with level indicator installed on suitable steel frame Power command genset controller, fuel pipes, dual spin on fuel filter , Dry type Air cleaner , shut off coil with safeties for LLOP/HWT, fuel pipes bar meter, hour meter, oil temperature gauges, ammeter,ignition switch , radiator with cooling fan, maintenance free battery including suitable size of copper cable leads with terminals , all mountings accessories and AVM pads complete as per manufacturers recommendations and to the satisfaction of Engr in charge.Prime mover Suitable for driving 40KVA/32KW alternator water cooled battery start diesel engine of adequate capacity conforming of BS 649 and fuel tank suitable for 12 hrs running capacity mounted on MS frame pedestal supported with anti vibration mounting rated for continuous running capable of taking 10% over load for one hr in any 12 Hrs operation complete with the following standard accessories :- |
| 34 | (a) Fly wheel to match with the flexible coupling(b) Flexible coupling with guard(c) Air cleaner with dry type as per OEM(d) Lubricating oil filter, fuel filter paper element type(e) Blower type fan and radiator(f) Governor for class ‘A’ Governing as per IS-1601(g) Starter motor complete with dynamo Alternator; lead acid batteries heavy duty of capacity 12V,150Ah or adequate size, Nos and capacity as required with copper conductor cables and length not less than 2M including battery box all as directed. Alternator suitable for continuous operation generating 40 KVA/32KW at 1500 rpm, 50 Hz and voltage 415 V with power factor 0.8, alternator 3 phase 4 wire 50 Hz, self excited & regulated, coupled to prime mover, screen protected drip proof free from simultaneous brushless automatic voltage regulator regulated between +-1% of set voltage from no load to full load and conforming to IS:13364. BS 2613 complete with automatic voltage regulator regulated between +/- 1% or set voltage from no load to full load and confirming to IS-143364. |
| 35 | \\"EXTERNAL ELECT SUPPLY\\" |
| 36 | Supply, installation, testing & commissioning of package type/unitised 11kV / 433 V Outdoor sub-station, 400kVA made from G.I. enclosure complete as required conforming to IEC 62271-202/ relevant, IS specifications including K-10 Temperature Class as applicable for the rating, Internal Arc of 21 KA/1 Sec. IAC AB on 1:2:4 (1 cement :2 coarse and :4 Graded stone aggregate of 40 mm nominal size) PCC foundation of suitable size extending 500 mm all around the outdoor enclosure and 1000 mm height (above ground level) complete with suitable sizes of GI Pipes for incoming/outgoing cables/earthing strips etc. and consisting of following complete as required. Angle iron frame of size 40x40x5mm NS all along the corner of the foundation. Vacuum Interrupter, RMU, LT panel, MFM and CSS shall be of same make to ensure life cycle optimization.Note: CSS shall be from OEMs only. Package substation will have the following equipment :-HT SWITCHGEAR 11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of 1 nos. fixed manual operated Vacuum Circuit Breaker Module along with 1 no. manual Load Break switch module in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection. HT RMU shall preferably have site replaceable bushings to have very less downtime in the event of bushing breakage and restoration can be done immediately without sending the RMU to OEM Works.(i) Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium XLPE cable. - 01 Nos.(ii) Microprocessor based IDMT Relay for Circuit Breakers - Self Powered along with series trip coil. Capacitive voltage indication fixed type system with LED, SF6 Gas pressure indicator and Battery 2X12V & Charger. |
| 37 | (iii) VCB operating sequence must be O-0.3sec-CO-3MIN-CO Protection CT shall be minimum 40/1A ,2.5VA ,5P10. - 03 nos.All modules of the RMU shall be suitable for cable termination of 3C x 300 sq.mm Al XLPE Cable, incoming cable termination is included within the scope of work - 01 Set.TRANSFORMER 400 KVA 11KV/433V DYN-11 Copper Wounded Cast Resin Dry Type Transformer with Off load tap links of -5% to +5% @ 2.5% with WTI scanner, Class of Insulation: F, Temperature rise limits 115 deg.C over an ambient of 40 degrees. Losses shall be as per latest ECBC-2017 code with WTI scanner 01 No. Winding Temperature Indicator with 1 alarm and trip contact. - 01 Nos Surge arrestor in the HV side. - 01 SetLT PANEL: LVS PANEL 1000 AMPS 4 pole Aluminium BUSBAR (100% FOR PHASES AND 100% FOR NEUTRAL) - CURRENT DENSITY OF Aluminium as 1 A/sq.mm.; LT panel made up of 1.5/2 mm thick CRCA sheet incomer from transformer 630 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) Multifunction meter of class 0.5 accuracy. - 01 Nos along with suitable CT OUTGOING 4 Nos. 250 Amps 433V 4P 50Hz 36KA Thermal release Type Moulded Case Circuit Breaker (MCCB) to 2 Nos. 40 Amps 433V 4P MCB, Hard wiring from each equipment inside CSS for SCADA connectivity (monitoring & control) to be brought to one set of TBs and a space for FRTU to be given.All Civil works such as PCC/RCC foundation, Platform, Filling trench and pedestal etc as per CSS manufacturer’s recommendation are included in scope of work. |
| 38 | OUTDOOR ENCLOSURE: Outdoor type enclosure of 1.5 mm (For non load bearing members) & 2.0 mm (For load bearing members) thickness having modular construction of Galvanised Sheet Steel in suitable design for better heat dissipation and providing robust construction. The Enclosure shall have IP54 degree of protection for HT & LT switchgear compartment & IP 23 degree of protection for transformer compartment. The enclosure exterior shall be painted with epoxy based powder paint (colour RAL -7032). Each compartment will be provided with the door and pad locking arrangement. The design of the enclosure should be type tested for suitably handling any arcing inside the compartment for providing better safety to the operator. The compartment illumination lamp with door operated switch shall be provided for each compartment. Vacuum Interrupter, RMU, LT panel, MFM and CSS shall be of same make to ensure life cycle optimization.Note : Design and drawing shall be approved by the Accepting Officer before placing firm order from manufacturer |
| 39 | Supply and Installation of 11 KV, 630 Amp Load break switch type HTMC PANEL Box structure with provision of earth switch in all Phases and HT Fuses for safety purpose and arrangement to include CT/PT Unit & HT Metering unit. Intergration with existing system along with any required accessories are all included. Please Enable Macros to View BoQ information |
| 40 | Supply and Installation of 11 KV, 630 Amp Load break switch type HTMC PANEL Box structure with provision of earth switch in all Phases and HT Fuses for safety purpose and arrangement to include CT/PT Unit & HT Metering unit. Intergration with existing system along with any required accessories are all included. Please Enable Macros to View BoQ information |
