|
| 1 | Maintenance and Repairs to Amma Unavagam near Bus stand and Govt. Head Quarters Hospital in Udhagamandalam Municipality |
| 2 | Removing the damaged floor tiles from flooring including all cost etc.,complete |
| 3 | Dismantling the existing damaged plain cement concrete flooring including removel of the debris away from site etc., complete as diercted by the dept officers |
| 4 | Plain Cement concrete 1 : 4 : 8 (one cement, Four sand and eight aggregates) using 40mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS |
| 5 | Plain Cement concrete 1 : 2 : 4 (one cement, two sand and four aggregates) using 20mm ISS HBG metal including cost and conveyance of all materials and labour charges for mixing, laying, compacting and curing etc, complete as per SS |
| 6 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in accordance with IS 1443 over a cement mortar bed of 20mm thick in Cement Mortar 1:3 (One Cement and Three crushed stone sand) with required Cement Slurry and Mortar Plasticizer and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 7 | Painting external wall with two coats of best approved quality of plastic emulsion paint over a including one coat of priming of exterior emulsion paint - water based primer (liquid) primer over cement surface wall as directed by the departmental officers including cleaning preparing the surface etc.,complete complying with standard specification.The cement paint should be got approved by the departmental officers before use on work |
| 8 | Painting two coats for old iron work surface using best quality synthetic enamel paint etc complete complying with standard specification |
| 9 | Repair works for existing plumbing and replacing the damaged taps and other plumbing itemsGI Pipe15 mm dia |
| 10 | Bib tap/pillar tap brass 15mm |
| 11 | Elbow 15 mm dia |
| 12 | Bend15 mm dia |
| 13 | Supply and fixing of Armoured CAT - 6 Cable |
| 14 | Supply and fixing of POE Switches For CCTV IP Camera 8 PORT |
| 15 | Supply and fixing of Hard Disk forNetwork video recorded for CCTV Camera 6 TB 1 SATA 1 (No 1 Hard Disk) |
| 16 | Supply and fixing of Network video recorded for CCTV Camera and Channal . |
| 17 | Supply and fixing of CC TV Camera. |
| 18 | Supply and fixing of 6 U Rack.with accesarys for 6U Rack |
| 19 | Supply and fixing of I/O socket RJ 45 |
| 20 | Supply and fixing of I/O socket RJ 11 |
| 21 | Supply and fixing of 32\\" LED TV. |
| 22 | Supply and fixing of electrical items including all cost etc., complete 20W LED Tube Light for T8 Fitting (Single Side) |
| 23 | Supply and fixing of AC Exhaust Fan 450mm (18”) Sweep (Light Duty) etc.,complete complying with standard specification |
| 24 | Supply and delivery and fixing of Reverse Osmosis Plant (200 Litre) including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc... |
| 25 | Providing Floor cussion matt of size 1.2mtr x 0.90mtr incluidng cost of underlay ,carpet of best quality and colour and quality approved by the deparment engineer and labour charges etc complete |
| 26 | Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: 50x44.45x2.50mm @ 1.292 kg/m ,Bottom rail: 100 x44.45 x 2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m, Alu Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 Kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - Each., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bush including cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete complying with standard specification and as directed by the deparmental officers. All the Alu. Section are to be anodised with matt finish under electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge. |
| 27 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 28 | Supply and Delivery of Stainless steel Dustbin 18 to 25ltr capacity etc.,complete complying with standard specification |
| 29 | Supply and Delivery of chair etc.,complete complying with standard specification |
| 30 | Supply of Table etc.,complete complying with standard specification Please Enable Macros to View BoQ information |
