|
| 1 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. |
| 2 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 3 | SITC of 36 watt 2'x2' LED Panel Light having Aluminium Body ,minimum lumens 105 lm/w ,the luminaries housing should be aluminium and have an average life of 50000 hrs operating temperature -10 C to + 45 C,CCT 4000-6500K of Phillips/Havells /Eqt.make and have LM79/80 Test certificates |
| 4 | SITC of 18-22 watt,6500K LED Batten Light 4 ft long powder coated die cast al housing having rated input Volatge range 140-270 Volt,frequency 50Hz, operating temp range -15 degree C to 40 degree C,pf>=0.90,lifetime 500000 Burning Hrs,with system luman efficacy >=105 lm/watt with accessories for holding the same and have LM79/80 Test certificates |
| 5 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge: 25 mm |
| 6 | Providing and fixing of PVC panelling in false ceiling of approved brand and manufacture, including cost of aluminium framework, all fittings, fixtures, and all sorts of carriage complete in all respects as per directions of Engineer-in-Charge. |
| 7 | 12 mm Cement plaster in 1:6 mix |
| 8 | Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) |
| 9 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required: 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 10 | Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete: 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 11 | Providing and fixing decorative main door shutter made of HDMR (High Density Moisture Resistant) board of approved make and conforming to IS standards, 30–35 mm thick, including Cost of door frame of suitable section, Providing and fixing hinges, locks, and all necessary hardware fittings, Finishing the shutter surface with synthetic enamel paint / PU paint / deco paint of approved shade and brand, All labour, materials, tools, and incidental charges, As per directions of the Engineer‑in‑Charge, Complete job in all respects. |
| 12 | Providing and fixing of foundation granite stone of approved quality, size, and thickness, including engraving of letters/writing as per approved design, finished smooth, edges dressed, lettering painted with synthetic enamel paint, complete in all respects as directed by the Engineer-in-Charge. |
| 13 | Carriage of sand and crusher bajiri for an average lead of 30 Km. Please Enable Macros to View BoQ information |
