|
| 1 | Foundation excavation in hard soil including levelling and dressing the bed and sides depositing muck within initial lead and lift etc. complete. |
| 2 | Filling foundation and plinth with sand well watered and rammed including cost,conveyance and royality of sand etc. complete. |
| 3 | Cement concrete by using (1:3:6) 4cm. size HBG hand broken metal including cost,conveyance and royality of materials curing etc. complete. |
| 4 | Filling the foundation with excavated earth i.e 2/3 quantity of excavated earth @ 2/3 rd rate of E,Work. |
| 5 | Fly Ash Brick massonry (bricks 25x11x8) in c.m. 1:6 in F & P including cost,conveyance and royality of materials curing etc. complete. |
| 6 | R.C.C. work M-20 grade using 20mm.and down grade HBG crusher broken chips including hoisting,laying, cost,conveyance and royality of materials curing including centering and shuttering etc. complete |
| 7 | Plinth Band Toilet |
| 8 | Stair case g floor |
| 9 | Column and Beam |
| 10 | Slab Toilet |
| 11 | Lintel Toilet |
| 12 | Staircase first floor |
| 13 | Cut piece lintle of staircase |
| 14 | Waist Slab |
| 15 | Slab staircase |
| 16 | Fly Ash Brick massonry 25x11x8 in cm(1:6) in superstructure etc. complete. |
| 17 | Dismantling Brick or stone masonry in lime or cement mortar under 3m height inluding stacking the useful materials for reuse and removing the debris within 50 m lead etc complete |
| 18 | Fly Ash Brick massonry 25x11x8 in cm(1:6) in superstructure (1st Floor) etc. complete. |
| 19 | Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete. (G.Floor) |
| 20 | Supplying,fitting and placing uncoated HYSD bar reinforcement as per drawing and technical specification including cost,conveyance and all taxes of steel and binding wire etc.complete. (1st Floor) |
| 21 | 2.5cm thick grading concrete (1:2:2) on roof slab using 6mm size hard granite chips on new work |
| 22 | 16mm. thick cement plaster in c.m. 1:6 over Brick masonry including |
| 23 | 16mm. thick cement plaster in c.m. 1:6 over brick masonry including cost conveyance and royality of materials curing etc. complete |
| 24 | 12mm. thick cement plaster in c.m. 1:6 over Brick masonry including cost conveyance and royality of materials curing etc. complete. Out side (Above3 '0'' Above G.L) |
| 25 | 6mm thick ceiling plaster in c.m. (1:4) ( G.Floor)including closed deep chipping etc. complete |
| 26 | 6mm thick ceiling plaster in c.m. (1:4) ( 1st.Floor)including closed deep chipping etc. complete |
| 27 | Finishing surface of wall with Acrylic wall puty ( water based) of approved make and finished smooth and even surfaces to receive painting including cost of scaffolding staging charges with cost of all materials, tax, labour T&P etc complete. |
| 28 | Wall Priming one coats on new work with wall water bound primer of approved shade . |
| 29 | Wall painting two coats on new work with plastic emulsion paint of approved shade . |
| 30 | Wall painting two coats on new work with Weather coat paint of approved shade . |
| 31 | Supply fitting and fixing MS grill with Iron work wrought and put up in window grating including drilling holes in choukathas etc. complete as per direction of Engg-in-Charge . |
| 32 | Enamel Painting two coats including red oxide primer of approved quality etc. complete |
| 33 | Supplying, fitting and fixing Anti-Skid ceramic tile in floors, treads of steps and landing on 20mm thick cement mortar(1:4) (1 cement : 4 course sand) and filling joints with white cement of approved quality including cost of all materials, labour T&P etc required for the work all complete as per direction of Engineer-in-Charge. ( For New work Only) |
| 34 | Providing and fixing Glazed Ceramic tiles in walls, dados and skirting and in rises of steps on 12mm thick bed of cement plaster (1:3) joined with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing including cost of tile. |
| 35 | Supplying and fixing 2\\" X 2.5\\" size FRP door frame including all hardware fittings etc complete. |
| 36 | Supplying and fixing 30mm thick FRP door shutter including all hardware fittings etc complete |
| 37 | Providing and fixing of Fixed Ventilators of approved make to be fabricated from roll formed sections made of pre-painted steel etc. complete. |
| 38 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I)(No deduction have to made for light opening.) |
| 39 | Finishing surface of wall with Acrylic wall puty ( water based) of approved make and finished smooth and even surfaces to receive painting including cost of scaffolding staging charges with cost of all materials, tax, labour T&P etc complete. |
| 40 | Wall painting two coats on new work with plastic emulsion paint of approved shade . |
| 41 | Supply and fixing of MCM Modified Clay Material - MCM A Series Brick - 240 x 60 mm of as per company standard dimension, pattern, colour as specified, manufactured through unfired patented manufacturing technology, bonded together by using low heat temperature and having CE approval with the thermal conductivity of 0.0590 W/M.K — EN 12667 (2001), thermal resistance of 0.0568 M2 K/W— EN 12667 (2001) and Fire Insulation - Class A— ASTM E84- 15. The product should be patented from United States and Europe and with certifications by IGBC, Singapore Green Label and China Green Building material. MCM Materials should be fixed with suitable Cement/ Polymer/Epoxy based adhesive as per adhesive chart and substrate and per directions of Engineer in-charge. Grouting should be done using filling and pointing method as per installation drawing provided, and colour of the grout should be as per the architect’s specification depending on the substrate and as per the direction of Engineer in-charge. |
| 42 | PH Providing and fixing to wall or ceiling and floor pvc pipes class conforming to ASTM-D-1785/2000 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification complete. |
| 43 | 25mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.) |
| 44 | Fixation of J Hook in walls |
| 45 | 25mm dia UPVC ASTM Ball Valve |
| 46 | 110 mm Rigid UPVC Pipe (IS:4985-200) For Latrine Gash Pipe |
| 47 | 110mm Vent Cowl (Top of Gash Pipe) |
| 48 | Cost & Fitting Charges of 3 layer White Rotational Module Cylindrical Water Storage Tank (ISI Mark) (1000 lit.) |
| 49 | Cost & Fitting Charges of 3 layer White Rotational Module Cylindrical Water Storage Tank (ISI Mark) (1000 lit.) 01 no.s |
| 50 | Cutting grooves in pucca floors and walls for taking GI/PVC pipes and making good the damages as per specification complete. |
| 51 | Cutting holes through existing brickwork including making good the damages in cement mortar (1:4) |
| 52 | Supplying all materials, labour and T&P and fixing to walls,ceiling and floor unplasticized PVC pipes conforming to [ASTM-D-1785/2004,Sch-80.],the following nominal diameter with fittings and clamps including testing as per specification all complete.[in ground floor][data for 10 mtr.][3.1.3/313] |
| 53 | 15mm.dia PVC pipe [ASTM-D-1785/2004,Sch-80.]:-(per mtr.) |
| 54 | 20mm.dia PVC pipe [ASTM-D-1785/2000,Sch-80.]:-(per mtr.) |
| 55 | Supplying fitting of all materials i.e (EWC With S-Trap including 10 lit.Cystern, Cover & Jet Spray) labour and T&P for fixing wash down water closet (European type W.C.) with integral \\"S\\" or \\"P\\" trap tothe floor with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. |
| 56 | Supplying fitting of all materials i.e (Orissa pan 23'' including 10 lit.Cystern, foot rest & Hand Spray) labour and T&P for fixing Orissa pan 23'' on the floor with 1:3: 6 & Cystern & Hand Spray with wooden plug and chromium plated screw including jointing the trap with soil pipe in cement mortar (1:1) etc. all complete as per specification. |
| 57 | Supplying all materials, & fixing glazed earthen-ware squatting urinal (ladies) plate of size (600x355mm.) including Procelain foot rest for IWC (02 No.) and Urinal waste Coupling ,with integral longitudinal flushing pipe including embedding the plate in 25mm. cement mortar (1:8) laid over 150mm. cement concrete (1:3:6) using 12mm. size h.b.g. chips all complete as per specification.[3.3.9./340] |
| 58 | Supplying of all materials,labour and T&P for fixing of Flat Back Standing Urinal (Medium) 380x580x350including the urinal PVC waste pipe 50 mm x800 mm, Urinal waste Coupling & Procelain Urinal Spreader (Angular Tape) by means of white lead mixed with chopped hemp etc. all complete as per specification.[3.3.8./339 ] |
| 59 | Supplying & Fitting, Fixing of Wash basin (22\\"x 16\\") including CP Gratting, 32mm.dia.PVC waste pipe, 15mm. dia.C.P. Bib cock (Long body) (including fixing) & CP Flange with all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.12./344] (including cost of wash hand basin and all accessories. ) |
| 60 | Supplying & Fitting, Fixing of Pedestal Wash Basin 22\\"x 16\\" including CP Gratting, 32mm.dia.PVC waste pipe, 15mm dia Short body bib cock Including Fittings (including fixing) & CP Flange with all materials,labour and T&P for fixing wash hand basin with hole for pillar cock with cast iron /M.S. brackets painted white including cutting holes in walls and making good to the damages etc. all complete as per specification.[3.3.12./344] (including cost of wash hand basin and all accessories. ) |
| 61 | Fixing standard sized Chromium Plated brass towel rail complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. (CP Towel Rail (600x20) mm) |
| 62 | Fixing standard sized Chromium Plated brass towel ring fixed to wooden plugs with Chromium Plated brass screws, complete as per specification. |
| 63 | Supplying all materials,labour and T&P for fixing of soap holder fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification.[3.3.29./359] or (b) Chromium Plated brass soap dish complete with Chromium Plated brass brackets fixed to wooden plugs with Chromium Plated brass screws or (c) white glazed tooth brush holder fixed to wooden plugs with Chromium Plated brass screws as per specification. |
| 64 | Providing and fixing of 15 mm CP 2 in 1 Bib Cock [including cost] |
| 65 | Providing and fixing of 15 mm CP 2 way Bib Cock [including cost] |
| 66 | 15mm dia CP Extension Piece 2\\" |
| 67 | 5\\" C.P. Grating |
| 68 | CP Flange |
| 69 | Supplying all materials,labour and T&P for fixing of Mirror (600 x 600)mm bevelled edge mirror of superior glass -wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification.[3.3.26./357] |
| 70 | Supplying all materials,labour and T&P for fixing of Framed Mirror of superior glass -wood sheet and fixed to wooden plugs with chromium plated brass screws and washers etc.all complete as per specification.[3.3.26./357] |
| 71 | Fitting & fixing of 15 mm CP revolving Shower bend type arm 600x25x25mm square / Round shape with wall mounted showers including fittings of flange, 15mm.dia.C.P. stop cock, CP Gratting |
| 72 | Providing and fixing on wall face unplasticised 110mm dia OD PVC SWR S/S Pipe (ISI) (Rain Water Pipe)waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 73 | 110mm dia PVC SWR Door Bend 87.5' |
| 74 | 110mm dia PVC SWR Plain Bend |
| 75 | 110 mm dia SWR PVC P Trap |
| 76 | 110mm dia PVC SWR Gully Trap |
| 77 | 110mm door Cross Tee |
| 78 | 110mm dia PVC SWR pipe clip |
| 79 | 75mm dia Plain Bend |
| 80 | 75mm dia PVC Door Bend (87.5') |
| 81 | 125mm x 75mmSWR off set BEND |
| 82 | 110 mm Door Bend |
| 83 | Electrical Recessed wiring to light point / fan point / exhaust fan point / call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5 Amp, 250 V modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front modular cover of suitable size , MS modular box with 1.0 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 84 | Group A |
| 85 | Group b |
| 86 | Group C |
| 87 | Supplying and fixing of following MODULAR type Bell push on the existing switch box / cover including connections etc as required. as per direction of Engineer in Charge. ( Make of wire Finolex / L&T / Anchor / Havels / V Guard ) |
| 88 | Recessed wiring to submain in 2 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor o f ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 89 | Recessed wiring to submain in 2 x 4 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 90 | Recessed wiring to submain in 2 x 6 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked confirming to IS-694/1990 in 20 mm dia non-metalic heavy duty flexible conduit 1.6 mm thick along with 1 x 2.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as equired.(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 91 | Supply and fixing of 3 no.sof 3pin 5/6 amp modular socket and S.P. 5/6 amp one way modular switch, 1 no. of 5 pin 15/16 socket out let and S.P. 15/16 A one way modular switch on Modular G.I. Box with Modular Base and cover (Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 92 | Supply and fixing of 3 pin 6Amp plug with 6Amp switch on existing board (Modular type ).(Make of wire Finolex/L&T/Anchor/Havels/V Guard) |
| 93 | Supply and fixing of following way single pole and neutral, sheet steel, MCB distribution board consumer unit, 240 V on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, hinged front acrylic covr for the MCB knobs detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required ( But with out MCB / RCCB / Isolator) -12 Way |
| 94 | Supply and fixing of 5Amp to 32A rating 240V \\"B/C\\" series MCB suitable for lighting and other loads of the following poles in the exiting MCB DB ISI marked complete with connections testing and commissioning etc. as required.(make-HPL/ Havells/ Legrand /L&T/C&S) |
| 95 | Earthing with G.I earth pipe 3 meter long 40 mm dia ISI marked including accessories and providing masonary enclosure with cover plate having locking arrangment and watering pipe etc with charcoal and salt as required.(make-HPL/ Havells/ Legrand /L&T/C&S) |
| 96 | S/F of 1200mm High Speed Ceiling fan Alluminium Body, Copper winding, High speed ceiling fan (Make-Crompton Model-Riviera High Speed, Polycab Model-Vital, Polar Model-Winpro) etc. |
| 97 | Supplying and fixing of Stepped type modular fan regulator on existing switch box / cover including connections etc as required.(make-Anchor/cona/Havels/Polycab etc.) |
| 98 | S/F of 8\\" PLASTIC VENTILLATING FAN exhaust fan (Make-Crompton Model-Jura, Polycab Model-Vital, Polar Model-Winpro) etc. |
| 99 | S/F of 1x18 Watt LED T-5 fitting(Make-Crompton/Philips/Havells/Bajaj) |
| 100 | S/F of 60 W LED Street light fitting(Make-Crompton/Philips/Havells/Bajaj) |
| 101 | Providing and fixing of following capacity TP& N disconnector fuse switch unit inside existing cubical panel board with ISI marked HRC fuses including drilling holes in cubical pannel, makinfg connection etc as required.63ATPN |
| 102 | MV cable laying up to 10 sq.mm 2core on surfaceLaying and fixing of one number of PVC insulated and PVC seathed / XLPE power cable of 1.1 KV grade of size not exceeding 20 sq.mm on surface as required. |
| 103 | Providing and fixing M.V danger board of 250 mm x 200 mm made mild steel at least 2 mm thick and vitreous enameled white on both sides and with inscription in single red colours on front side as requred. |
| 104 | S/F of 18 Watt LED Square surface mount fitting (Make-Havells/Philips/C&S/Crompton) as requred. |
| 105 | Supplying and fixing of 1.5T 3 star Fixed Split type AC machine ( Make-Volatas, Crrier/ Havels/ Loyd/ Hitachi/ L.G/ Blue Star etc. as required as per direction of Engineer in Charge. |
| 106 | Supplying and fixing of KVA Stabilizer (Make-V Guard, Aututech,/Microtech) etc. as required as per direction of Engineer in Charge. |
| 107 | Supplying and fixing of extra copper pipe with Nylon insulation etc. as required as per direction of Engineer in Charge. |
| 108 | Supplying and fixing of angle frame etc. as required as per direction of Engineer in Charge. |
| 109 | Supplying and fixing of 100KVA Pannel Board etc. as required as per direction of Engineer in Charge. |
| 110 | Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination drilling rigs ( 1200 cfm/300psi) as required to suit to the site condition as per direction of Engineer-in-charge including use of own rig with its accessories, tools and plant, and consumables etc., for lowering of 200mm dia PVC/ GI Pipes for housing , fitted with socket and with or without well screen as per the necessity for soft, medium hard and boulder formation (GI/ PVC casing pipes if required to prevent collapse of over burden is to be provided by the contractor including lowering and withdrawing after completion of the tube well ). |
| 111 | Labour for drilling to accommodate 200 mm x 150 mm size vertical bore hole (0.00 to 100.00 mtr ).(0.00 to 30.00 mtr ) |
| 112 | Lowering the following size GI/ PVC pipes with or without slotted pipes as per the necessity from ground level fitted and fixed up in perfectly vertical position, including cutting and threading pipe and slotted pipe and supplying and fixing all jointing materials, tools and plant etc., complete and keeping the top of the casing pipe threaded including plugging tube wells to prevent entry of foreign materials from above. |
| 113 | 0 to 30 mtrs or more |
| 114 | Cleaning and developing the tube wells using their own compressor continuously worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of Engineer-in-charge. |
| 115 | Supplying all materials, labour, tools and plant and withdrawing casing pipe from the unsuccessful bore and depositing in the departmental store in good condition . |
| 116 | With drawing of 150 mm dia PVC/GI casing pipe.(If Bore well Faliure) 0 to 30 mtrs or more. |
| 117 | Filter Media (Gravel) with size varying from 40 to 60 mm at bottom to 2 to 5 mm (S/R 2022 Pg 240) |
| 118 | Cost of 150 mm dia Sch 80 PVC casing pipe ( As Per S/22 Page 141) |
| 119 | 150mm diaPVC (C.S) END CAP 1 No@Rs 550.00/each |
| 120 | Cost of 1 no. 1.5 H.P Submersible Pump set having discharge 300 LPM with operating head of 40 mtr (12 Stage) 1Stage Head ,=,4 mt. (Kirloskar / Lubi) with Control Pannel |
| 121 | Electrical Flat CableCable (Electrical 4 mm Squre mm thickness) |
| 122 | Fittings such as Nipple,Reducer,Socket,NR valve,Sluice valve,8 mm² PVC coated wire rope. |
| 123 | Labour charges for installation of pump,pipe,panel,cable &other electrical equipments etc. including all material Cost & transportation of materials. |
| 124 | 40 mm HDPE pipe |
| 125 | 110 mm dia SWR PVC P Trap |
| 126 | 110mm dia PVC SWR Gully Trap |
| 127 | 110mm door Cross Tee |
| 128 | 110mm dia PVC SWR pipe clip |
| 129 | 75mm dia Plain Bend |
| 130 | 75mm dia PVC Door Bend (87.5') |
| 131 | 125mm x 75mmSWR off set BEND |
| 132 | 110 mm Door Bend |
| 133 | Earthwork in excavation of foundation in all kinds of soil including dressing and levelling the bed to required depth and width and deposting the excavated materials away from work site as directed by Engineer in charge. |
| 134 | Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete. |
| 135 | Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth. |
| 136 | RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying inF F & Plinth |
| 137 | RCC wok of M-20 grade with 20mm downgraded size hard granite chips including hoisting and laying in super structure. |
| 138 | Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transporting by mechanical means unloarding the soil within intial lead of 1 Kmt. On properly prepaired and scientifically approved surface including spreading & levelling the earth in 22.5 cm layers to make ready for watering and compaction in dams & dykes per all heights including construction, maintence, watering & lighting of haull road & borrow area etc complite as per the direction of Engineer Incharge. (Measurement of fill to be taken on the finished compacted section under OMC condition.) |
| 139 | Earthwork in hard soil with initial lead and lift including rough dressing and breaking clods upto 5cm to 7cm size and laying in layers each layer not exceeding 0.3m in depth etc. complete. |
| 140 | Filling in foundation and plinth with sand well watered and rammed including cost conveyance and royalty etc. complete. |
| 141 | Cement Concrete (1:3:6) with 4cm size hard granite metal in Foundation and Plinth. |
| 142 | Cement Concrete (1:2:4) with 12 mm size broken hard granite chips |
| 143 | Providing and laying 80mm thick factory made cement concrete inter locking paver block of M-40 grade conforming to IRC SP-63:-2018 made by block machine of approved size , design & shape and in required pattern on road surface including filling the interstices with sand etc.complete including all cost Please Enable Macros to View BoQ information |
