|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 3 | Demolishing brick work in lime or cement mortar including plaster, paint, etc. manually/ by mechanical means including nesessary scaffolding, stacking of serviceable material and disposal of unserviceable material as per direction of Engineer-in-charge/Architect. |
| 4 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 5 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. |
| 6 | Repair with Polymer Modified Mortar (PMM): Repairs to the deteriorated / damaged areas of RCC elements in the structure shall be carried out by using powder Polymer Modified repair mortar. The polymer modified mortar is applied when the epoxybonding coat is still tacky. In one application25 mm thickness shall be built. Subsequentlayer shall be built with one bond coat of Polymer modified cement slurry. The polymer modified repair mortar shall be mixed, applied and cured as per technical |
| 7 | Chipping /removing loose concrete upto reinforcement bars,without damaging the reinforcement, removing all the loosematerials and to make all the exposed surfaces free from oil,dust and all impurities etc complete. |
| 8 | Removing corrosion of steel reinforcement by mechanicalmeans like wire brushing, chipping to remove loose rust andthen applying rust removal solution by using brush application,leaving the surface for at least 15 to 30 minutes, thenremoving loose materials by scrubbing or with brush. Afterdetachment of loose scales reddish rusted surface is still leftexposed, this has to be retreated or as per approvedmanufacturers specifications. (Note:- Consider surface area ofconcrete for payment) |
| 9 | Bond Coat: Providing & applying One coat of structural grade epoxy bond coat by brush conforming to ASTM-C-882- 87to the prepared concrete surface to be repaired / strengthened. This is applied prior to the application of polymer repairmortar / epoxy mortar / Microconcrete to have monolithic action between old concrete surface and new concrete surface |
| 10 | Repairing to the existing RCC structural members (vertical orhorizontal) using ready mix Micro Concrete of approved brandwhere the thickness of repair is more than 30 mm and upto115 mm. It can be used for carrying out extensive repairs tobeams, columns and other structural elements, repairing ofstructural members subjected to repetitive loading & forJacketing of beams, columns and other structural elements forstrengthening. |
| 11 | Hiring hydraulic excavator/JCB including to & fro mobilization, wages of operator, cleaner and cost of fuel, oil etc. per shift (Shift shall be of 8 hours). |
| 12 | Hiring dumper, including wages of driver, cleaner and cost of fuel, oil etc. per shift (Shift shall be of 8 hours). |
| 13 | Supply of semi-Skilled workers including tools and tackles for odd and unmeasurable jobs for 8 Hrs. |
| 14 | Supply of unSkilled workers including tools and tackles for odd and unmeasurable jobs for 8 Hrs. |
| 15 | Removal drain pipes (soil, waste, water, ventilating and rain water pipes) of any size, with all fittings. |
| 16 | Removing G.I. Pipes of any size with all fittings complete. |
| 17 | Labour for removing soil pan (Indian or European Style including its bedding drainage fitting) / urinal / flush tank / wash basin or sink with brackets, etc. including disconnecting (water & drainage fittings) etc. & depositing the reuseable materials in Township Civil Stores. |
| 18 | Providing and laying in position plain cement concrete of specified grade cement with trap/granite/quartzite/gneiss metal mixing in concrete mixer including bailing out water, compacting, finishing surface, curing and including the cost of centering and shuttering at all level :Nominal Mix of 1:3:6 (1 Cement OPC: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). |
| 19 | Lintels, beams, plinth beams, girders, floor beam, coping. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 and above in superstructure above plinth level upto floor five level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 21 | Constructing & laying Brickbat Coba in cm 1:5 with waterproofing compound as per manufacturer’s specification & having average thickness of 150 mm & finishing with 20 mm thick cement mortar layer in 1:3 with waterproofing compound as per manufacturer’s specification. (for toilets) |
| 22 | P/F pre polished, double 19mm thk granite partitions incl moulded edge and mirror polished finish for pantry / basin counter as per details. (size 1200 x 625mm) |
| 23 | Providing and applying avg 12 mm thk single coat cement sand plaster in cement mortar of mix in ratio of 1:3 (1 cement : 3 fine sand), smooth or as required to receive specified finish or to receive tiles/marble over to correct line, plumb and level to internal faces of walls/ ceilings including providing & fixing in position 150 mm wide 20 gauge GI chicken mesh at junctions of concrete and masonry work and if required apply chemical adhesive to concrete surfaces and scratch coat, necessary scaffolding with all lifts and leads, hacking, watering, curing, etc complete as directed by Engineer In Charge. NOTE: Only river sand shall be used for internal plastering work. |
| 24 | Providing and applying 20 mm thick external sand faced cement plaster upto any height and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge. |
| 25 | Providing & fixing wall paper of D décor make & of approved design, pattern & shade as required and as directed by Engineer In-charge/Architect.. (basic rate Rs. 135/- to 165/- per sq.ft.) |
| 26 | Providing and fixing in position suspended gypsum board in false ceiling or vertical straight panel with G.I. suspension system amd 12mm thick gypboard sheets of renowned brand including G.I. corner beads ,edge trims and other accessories. Joint tapping, finish ing compound including mark in gand doing all cut out sfor light fittings, air conditioning grills/diffusers as per requirement and as |
| 27 | R3-CS-WW-21-b Providing and fixing Armstrong false ceiling or equivalent with grid etc. with India Gypsum PVC laminated 9.5 mm thk ‘POLYSHIELD’ tiles having metal polyester backing or Armstrong ARMGYP or equivalent tile of 9mm thk with in module size 595 mm X 595 mm X 9 mm thick at required height above FFL. |
| 28 | Providing and fixing in position suspended gypsum board in curved portions of false ceiling or vertical ,with G.I. suspension system amd 12mm thick gypboards heet s of renowned brands such as 'IndiaGypsum', including G.I. corner beads, edge trims and other accessories. Joint tapping, finishing compound including marking and doing all cut outs for light fittings, air conditioning grills /diffusers as per requirement and as directed. |
| 29 | Providing & fixing Officers Table of size 4'6\\"L x 2'0\\"W x 2'6\\"H) & side table size (3'0\\"L x 1'3\\"W x 2'6\\"H) with keyboard tray, pencil drawer, storage with openable shutter and 12\\"thk divider shelf or drawers as directed, made in 3/4\\"thk ply for front, sides, verticals & shelves. Front apron cladded with 3/4\\" thk raised panel finished with laminate, top in 3/4\\" thk ply cladded with laminate. All exposed surfaces finished in laminate of approved shade and polish to all internal surfaces complete with approved hardware such as drawer slides, cable managers of approved make complete as per design/instructions. (For increase/decrease in table top size :Per Sq. M rate for officer table and side table to be taken is Rs. 15126/-) |
| 30 | Providing & fixing Officers Table of size 5'3\\"L x 2'0\\"W x 2'6\\"H) & side table size (3'0\\"L x 1'3\\"W x 2'6\\"H) with keyboard tray, pencil drawer, storage with openable shutter and 12\\"thk divider shelf or drawers as directed, made in 3/4\\"thk ply for front, sides, verticals & shelves. Front apron cladded with 3/4\\" thk raised panel finished with laminate, top in 3/4\\" thk ply cladded with laminate. All exposed surfaces finished in laminate of approved shade and polish to all internal surfaces complete with approved hardware such as drawer slides, cable managers of approved make complete as per design/instructions. (For increase/decrease in table top size :Per Sq. M rate for cabin table and side table to be taken is Rs. 15038/-) |
| 31 | Providing and fixing of Full Height Partitions systems of 100 x 25 mm thick section on all four sides for the partitions. Complete in all respect considering 10 mm toughened glass with double sided adhesive tapes for glass to glass butt joints. The measurement will be taken only uptill false ceiling height.Windoor / Otic Make. |
| 32 | Providing and fixing Sound Absorbers Eco Panel, Thickness: 10 Mm, inclusive of HAT profile, veneer designer panel shall be including with backing ply panelling and malamine polished with 3coat , Basic cost of fabric Rs. 600 / mtr. acoustical panel from universal Building Products. |
| 33 | P/F half hight storage 2'6\\" high / 4' high & 16 to 18\\" deep made out of 3/4\\" MR ply 16 to 18\\"\\" deep, 6mm MR ply for the back with openable shutters with brass hinges as recommended & with laminate for all exposed surfaces and white laminate from inside. 3/4\\" shelves shall be provided as directed with leaping patties on all sides. All hinges tower bolts, ball-catches shall be of brass heavy duty. Complete with approved make locks, handles etc.complete as per design/instructions. All the shutters shall be made out of 19mm thick MR block board laminated on both side as per design/instructions. (Basic cost of laminate Rs. 870 per sheet) |
| 34 | P/F full hight storage 7' high & 16 to 18\\" deep made out of 3/4\\" MR ply 16\\" deep, 6mm MR ply for the back with openable shutters with brass hinges as recommended & with laminate for all exposed surfaces and white laminate from inside. 3/4\\" shelves shall be provided as directed with leaping patties on all sides. All hinges tower bolts, ball-catches shall be of brass heavy duty. Complete with approved make locks, handles etc.complete as per design/instructions. All the shutters shall be made out of 19mm thick MR block board laminated on both side as per design/instructions. (Basic cost of laminate Rs. 870 per sheet) |
| 35 | Providing and applying Plaster of Paris punning to walls, beams, ceilings, columns in perfect line and level over the base of single coat cement plaster including roughening of existing surface making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. complete. The rate is exclusive of base coat cement plaster. |
| 36 | Providing and applying three coats of White/colour wash to any surface with lime wash prepared from quick lime of best quality by adding blue/colour pigments and glue of approved colour, quality in required quantities at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom, coir and sand paper if necessary or by any other approved means etc. complete as directed by Engineer-in-charge. |
| 37 | Providing and applying first single coat of approved primer and two coats of acrylic plastic emulsion paint of an approved make and colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineerin-charge. |
| 38 | Providing and applying two coats of acrylic distemper (Asian Tractor Uno Acrylic Distemper/ Berger Bison Acrylic Distemper/ ICI Acrylic Distemper) of any colour as per manufacturers specifications to any surface, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting with broom and filling cracks or small patches with wall putty (Asian Acrylic wall Putty/ Dulux Interior Wall Putty A500/ Equivalent material in cost and properties) if necessary by any approved means, etc. complete as directed by Engineer-in-charge. |
| 39 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfacesspecifird below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.for plastered wall |
| 40 | Providing and applying first single coat of approved primer and two coats of synthetic enamel paint/flat oil paint of an approved make and colour as per manufacturers specifications to surfacesspecifird below, at all height and locations as directed including scaffolding, cleaning and preparing surfaces for painting by any approved means etc. complete as directed by Engineer-in-charge.for steel work |
| 41 | P/F of full height solid partition both side laminate made out of aluminium frame work 2\\"X1 1/2\\"at maximum spacing 2'C to C vertically and 1'6\\" C to C or as directed . Hotizontally cladded with 12mm thick ply up to ceileing level . The necessary framing shall be provided in the partition for electrical conduit & electrical outlet as per specification (basic cost of laminate Rs. 850 to 1100 per sheet) |
| 42 | Providing and making wash basin counter in single piece of 18 mm to 20 mm thk. telephone black granite 600mm wide, fixed over 25 to 40 mm thk black Kadappa, sandwich type construction, by making zari, in walls upto 75 mm deep & fitting the wash basin by using M.S. bracket & filling the wall surface by C.M 1:3 etc.(M.S. bracket and wash basin will be paid seperatly) |
| 43 | Providing and fixing 10 to 12 mm thk. vitrified tiles as specified below conforming to I.S. 15622-2006 with water absorbtion less than 0.08% and of approved quality, pattern and colour for dado in the dry area including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement slurry or approved colour grout, finishing, curing etc complete as directed by Engineer In Charge. Light coloured glazed vitrified tiles/ Dark coloured glazed vitrified tiles/ Light coloured antiskid / matt vitrified tiles/ Dark coloured antiskid / matt vitrified tiles |
| 44 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for sill and jambs for window/door frames etc. including round nosing/chamfering if required as directed by Engineer In-charge/Architect including preparing the surface and levelling in the desired line, cement mortar 1:3 bedding or backing, cement float, machine cutting, leveling, jointing, smooth cement plastering along the sides to match the existing surface in cement mortar 1:3, filling the joints with neat cement or pigment mixed with cement, finishing, curing etc complete as directed by Engineer In Charge.: 18mm thk. Ruby red, jet black, sparkle black, Hasan green Granite for width upto 300 mm in double or single patti as directed by Engineer In-charge/Architect . (for double patti, clear width will be measured. For widht upto 150mm, the rate will be reduced to half) |
| 45 | Providing and fixing 8 to 10mm thk. ceramic/vitrified tiles as specified below conforming to I.S. 15622-2006 of approved quality, pattern and colour for dado in the wet/dry area including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3 with approved waterproofing compound, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement slurry or approved colour grout, finishing, curing etc complete as directed by Engineer In Charge.: Light/Dark glazed, antiskid/matt tiles |
| 46 | Rebate in any type of dadowork for not providing andapplying backing of 20mm thk. cement mortar. |
| 47 | Providing and laying 1200 x 600 x 10 mm thk. vitrifiedtiles as specified below conforming to I.S.15622-2006with water absorbtion less than 0.08% for flooring ofan approved, quality, make, pattern and size forflooring including cement mortar bedding of 25 mmthick in 1:4 proportion, cutting, leveling, jointing, fillingthe joints by neat cement slurry or approved colourgrout, curing, finishing etc complete Charge.:Light/Dark glazed, antiskid/matt tiles |
| 48 | Providing and laying 600 x 600 x 8 mm thk. vitrifiedtiles as specified below conforming to I.S.15622-2006 with water absorbtion less than 0.08% forflooring of an approved, quality, make and pattern/design for flooring including cement mortar beddingof 25 mm thick in 1:4 proportion, cutting, leveling,jointing, filling the joints by neat cement slurry orapproved colour grout, curing, finishing etc completeas directed by Engineer In Charge. Light coloured glazed vitrified tiles/Dark coloured glazed vitrified tiles/Light coloured antiskid / matt vitrified tiles/Dark coloured antiskid / matt vitrified tiles |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.:15mm |
| 50 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.:20mm |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.:25mm |
| 52 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.:32mm |
| 53 | Providing & fixing counter top Wash basin of Parryware / Hindware make & color with its fittings including brass waste coupling, SS bottle trap, CP pillar tap (Jaquar/Plumber make), Connector for angel cock, CP heavy quality angle stop cock, etc. complete so as to make it fit to use. (Basic cost Rs. 2000/- to 2200/-) . The rates are incl. of installation & fixing ( labour rates) & other Hardware required. |
| 54 | installation & fixing of PVC inlet water connector pipe complete. |
| 55 | Providing & fixing European Wall hung W.C. of parryware/hindware make & color with its fittings, 4\\" dia. PVC bend pipe, M.S.brackets, soft closer seat, flush tank, etc. complete so as to make it fit to use. (basic cost Rs. 6000/- to 6200/-): EWC |
| 56 | Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge.100mm |
| 57 | Providing and fixing UV resistant selffit UPVC pipes of approved make for Rainwater downtakes confirming to IS 13592:1992 Type A suitable for 4kg/sqcm pressure for following pipe diameters including rain water receiving recess with pvc plug bend necessary fittings such as offsets shoes, fixing the pipes on wall with clips filling the joints with solvent/cement and necessary scafolding etc. complete as directed by Engineer In Charge.75mm |
| 58 | Providing, fixing & jointing in position heavy quality Prince make PVC pipes for soil, waste, agri pipes as outlet for wash basins, etc. including all fittings such as plug bend, plain bend, offsets, tees, nahani traps, Yconnection single or double, shoe etc. complete laid in alignment joined with PVC solvent and fixed. :40mm dia |
| 59 | Providing and fixing 10cm dia. PVC Nahani Trap fixed with PVC grating, PVC plug bend and piece of PVC pipe upto plug bend, etc. complete. The trap shall be fixed with PVC cockroach trap over with lid. |
| 60 | Providing & fixing Jaquar make continental series conceled stop cock in toilets. |
| 61 | Providing, Fixing, Testing and Commissioning of White Vitereous China Large Flat Black / Half Stall Urinal supported by CI / MS bracket (duly painted with 2 coats of paints over a coat of primer) including C.P. brass waste with dome type grating, PVC P trap with 50 mm water seel, wall flanges complete with all accessories. (TOTO make) |
| 62 | Providing and Fixing 35mm thick single leaf door 3'x7' with 8mm. thk. glass as per design or as directed by Engineer In-Charge/Architect. Door shutter finished with approved premium quality laminate on both side including necessary hardware, fittings & fixtures. The door shall be made operatable on floor sping of ENOX/OMEGA make & capable to taking its load with other patch fittings such as lock, botton & top patch, pivot, handle, etc. The sides of the door shall be finish in polish complete as per detail drawing, as specified and as directed. |
| 63 | Providing and fixing glazing panels & doors using 12mm thk toughen clear glass (confirming to ASTM Standards C-1048) supported by c channel (embedded in the floor) at the bottom & side edge and wall connecting profile at the top edge, stainless steel articulated counter sunk bolts threaded bolts, chemical fasterners,etc., glass panel size as per design and drawing including applying colourless sealant of joint incl. required edge polish, making glazing water tight etc. Destructive node joint test reports to be submitted forestablishing the safety factor, including operating hardware, SS patch fittings, fabricated long length satin finish SS 304 handles,patchlock, floor springs etc., complete or as directed by the architect for frameless patch doors,single or twin leaf shutters with fixed panel on top. Hardware-Droma BTS 80, hyper Floor Spring. |
| 64 | Providing & fixing in position 35 mm thick 1st quality water proof Single Leaf Flush Door with 1.5mm thick laminate on both sides with 12x35mm lipping patti on all egdes. Rate is inclusive of s.s.fixtures & fittings, such as handles on both sides, tower bolts, locking arrangement,, door stopper of make ( ozone,Hettich,Hafle ) 450 x 150mm aluminum ventilation grill powder coated, melamine polish to all exposed surfaces, edges, as directed by Engineer In-Charge/ architect. |
| 65 | Providing and fixing in position window of extruded modular aluminium section, anodised, coloured, partly fixed and partly sliding, two track mounted on rectangular tube frame of size 81.25 mm x 38.1 mm x 1.75 mm thk. (wt. 1.093 kg/Rm.) made up of two track drain bottom of size75 mm x 45.5 mm x 1.25 mm thick (wt. 1.073 kg/Rm.) and Two track top & sides of size 75 mm x 25.4 mm x 1.7 mm Thk. (wt. 0.800 kg/Rm.). The shutter bottom & top of size 43 mm x 25 mm x 1.7 mm thick (wt. 0.717 kg/Rm.) interlocking section of 43 mm x 25 mm x 1.70 mm thk. (wt. 0.802 kg/Rm.) and Handle sides of 43mm x 25 mm x 1.7mm thk (wt.0.642 Kg/Rm), selected quality 5.5mm thick clear glass to be fixed in shutter with neoprene gasket with approved quality PVC rollers with ball bearings, necessary locks, handles, PVC lining and wooden encasement wherever necessary etc. complete.All sections shall be of jindal make only. Fixed glass panel shall be assembled with suitable size beading angle 0.90 mm thick (wt.0.124 kg/Rmt). All the gaps in between window frame and sill shall be sealed by approved quality silicon sealant. |
| 66 | Providing and fixing in position three track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 92 mm x 45.5 mm x 1.5 mm thk (wt 1.659 kg/Rm) for bottom and 92 mm x 31.75 mm x 1.3 mm thk. (wt 0.933 kg/Rm) for top and sides mounted on anodized aluminum rectangular frame of size 100mm x 40mm x 1.3mm.(Wt 0.976 kg/m) The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26.7mm x 1.10 mm thk. (Wt. 0.469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) |
| 67 | Providing and Fixing in position anodized extruded Aluminum top hung/fixed window of Outer frame size- 50x42x1.3 mm. (Wt.0.65kg/m) Central mullion of size-72x42x1.3mm (Wt.0.70 kg/m) Shutter frame of 43x42x1.3mm (Wt.0.70 kg/m) Glazing clip of 25x27x1.2mm.(Wt.0.25 kg/m) with (No Suggestions) glass 5mm thk with neoprene gasket with hinges locking arrangement as per drawing etc. complete. |
| 68 | Providing and fixing in position 25 micron Anodised extruded modular aluminum section louvered window having 4mm thick selected bajari glass for louvered & 4mm thk frosted glass on top fixed portion with provision of exhaust fan at top with approved quality EPDM gasket, SS screw and wooden encasement wherever necessary etc. complete. Frame section no. 14043 @ 1.096 kg/m. |
| 69 | Providing and fixing Garware make Sun control of approved quality/shade to the window glasses, glass doors as directed. |
| 70 | P/F 3M / Garware make frosted film milky white shade/coloured for glazed partitions, glass doors & wherever necessary. |
| 71 | P/F laminate panelling to the existing columns/walls made out of aluminium framing 2\\" x 1 1/2\\" size at 2' to 2' C/C vertically and horizontally or as directed. Covered with 12mm thk MR GRADE ply and 1mm thk laminate as per design/instructions. The necessary framing/opening shall be provided in the panelling for electrical conduits & electrical outlets as per directions. (Basic cost of laminate Rs. 1200 to 1400 per sheet) |
| 72 | Providing and fixing aluminium framed door with hardner Laminated sheet 4mm thick (Bakelite composite panel) with outer aluminium frame of size A-section 50mmx20mmx1.5mm (Wt.0.571kg/M) using heavy duty steel hinges100mm, aluminium handle125mm, aluminium tadi200mm, alu. tower bolt100mm etc. complete. |
| 73 | Removing existing door or windows with frame and shutters and making good etc. to the existing surface. |
| 74 | Removing shutters of doors and windows without frame. |
| 75 | Providing and fixing stainless steel sink 600 mm x 450 mm and 200mmdeep including 32mm dia. galvanised iron waste pipe, 32mm dia. C. P. brass waste coupling, one C. P. brass screw down tap, caste iron brackets, rubber plugs with chain etc. complete. |
| 76 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)25 mm nominal bore |
| 77 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 78 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 79 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern |
| 80 | Providing and fixing JAQUAR MAKE, PRESSMATIC Taps Model No. 031 Pillarcock Auto closing system etc complete |
| 81 | Providing and fixing C.P. brass bib cock/ stop cock of approved quality conforming to IS:8931 : 15 mm nominal |
| 82 | Providing and fixing C.P. Brass two way bib cock with flange of approved quality and make. |
| 83 | Providing and fixing Health Faucet with one metre long easy flextube in chrome finish and wall flange |
| 84 | Providing & fixing 18 mm thick ply wood for furniture work with necessary adhesive pins, if required etc. complete. |
| 85 | Providing & fixing 12 mm thick ply wood for furniture work with necessary adhesive pins, if required etc. complete. |
| 86 | Removing existing door or windows with frame and shutters and making good etc. to the existing surface. |
| 87 | Removing shutters of doors and windows without frame. |
| 88 | Providing and Fixing MS Safety grill of weight specified below for windows as per design including fabricating the grill using M.S.square/roundbar, flats and angles including painting with one coat of redoxide zinc chromate primer and two coats of synthetic enamel paint of approved colour and brand etc complete as directed. Grill weighing 10 to 15 kg / sqm |
| 89 | Providing and fixing polished natural stone tiles as specified below of approved quality, pattern and colour for dado including preparing the surface and levelling in the desired line, backing of 20 thk. cement mortar in porportion 1:3, square cut top edge or chamfered top edge in cement mortar 1:3, cement float, machine cutting, leveling, jointing, filling the joints with neat cement or pigment mixed with cement, polishing, finishing, curing etc complete as directed by Engineer In Charge. 18mm thk. Ruby red, jet black, Hasan green Granite |
| 90 | P/F of Low Height Partitions (for cubicals) 5'0\\" high made out of 2\\"x2\\" aluminium framing at 2' x 1'6\\" C.to C or as directed. horizontally & vertically as per design. The framing shall be covered with 12mm thk ply & approved laminate from both sides as directed by the architect. The partition shall be provided with 3-1/2\\" wide x1 1/2\\" thk moulding patti in B.T.C on edges and the same shall be finished with matching mellamine polish/laminate with 12mm thk edge polished clear glass fixed over with s.s finish brass make D-brackets or by making grove in moulding patti as directed. The necessary opening shall be provided in the partition for electrical/telephone conduits & outlets as per design/instructions. (Note: laminates shall be 1 mm thk) (Basic cost of laminate Rs. 870 per sheet) |
| 91 | Providing & supplying meeting room table of size 6'-0\\" x 3'-0\\" seating capacity of 7 persons made in 19mm. Thk. Ply. The top shall be made 2\\" thk. All around as per design. Table shall be finished with approved shade 4mm. thk. veneer finished with melamine polish to all surfaces. Table shall have provision of electrical points, cut outs, required. (basic rate for veener Rs. 100/- per sft.) (For increase/decrease in table top size :Per Sq. M rate for meeting room table to be taken is Rs. 19927/-) Please Enable Macros to View BoQ information |
