|
| 1 | Desmantling of Plain or corrugated steel sheeting, any gauge, thickness including nainitel or similar pattern roof covering complete all as specified and directed. |
| 2 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 3 | S&F prepainted aluminium zinc steel sheet (galvalume base) or thickness 0.50mm having tensile strength of 550 MPA , any colour and profile as apporved by GE and to be factory moulded as in roof covering /cladding and fixed with hot dipped galvanised with high durable protective triple coated self tapping screws /self drilling serews, to suit the roofing in customized colour matching with the colour of roofing and screws are to be fixed using torque adjustable electronic gun screws drills of suitable capacity complete all as specified and directed. |
| 4 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick as in ridges, eves board of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws in any height all as specified and directed. |
| 5 | S&F framed work such as in grills,gratings, etc with ends of bars shouldered and / or riveted or forged into spikes; framed guard ; barred iron doors; ladders; framed balusters; walk ways; railing and simillar work Con-forming to Fe 290 Gde E-165 complete all as specified and directed. |
| 6 | S&F rolled mild steel sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails fixed with angle cleat or other connecting plates conforming to Fe 410-W Gde-E-250, quality A complete all as specified and directed. |
| 7 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets any thickness, including cover fillets but without frame work complete all as specified and directed. |
| 8 | S&F 8mm thick Non asbestos fibre cement building boards fixed or laid /inserted to existing timber/GI /Aluminium frame/flat iron frame work with screws as in ceiling including preparation of new surface of ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and directedall as directed . |
| 9 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillers etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and directed. |
| 10 | M&L brick work with sub class `B’ bricks, straight on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 11 | Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 12 | M&L providing PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directedinl necessary formwork complete all as specifed and directed. |
| 13 | M&L PCC 1:3:6, type C-2 (using 40 mm graded crushed stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 14 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed. |
| 15 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed. |
| 16 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed. |
| 17 | M&L RCC Type B1 1:2:4 (using 20mm crushed stone aggregate) for slabs supported on walls,beams and columns in floors,roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 18 | M&L precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:6 including necessary form work complete all as specified and directed (reinforcement to be measured separately). |
| 19 | Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 20 | M&L preparing surface of sunken slab and applying 15mm thick cement plaster 1:3 cement sand mortar with integral water proofing compound both on floor & wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating Polymer modified cementation coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturers instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder concrete upto top level to receive top flooring, incl providing 25mm dia GI spout pipe projecting 0.25mtr beyond the external face of wall complete all as specified and directed.Note : Water proofing compound shall be measured & paid for separately. |
| 21 | M&L 40mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in Sunken Portion of WC/Bath room complete all as specifed and directed. |
| 22 | S&F in repairs vitreous China squatting pan, Orissa pattern including PVC trap, size 580 x 440 mm white, with integral foot rests squat pattern closet also includes setting the trap and pan in cement concrete (1 cement, 2 sand or surkhi and 5 aggretate), min. 150mm thick all round and finished just below level of rim of pan to receive the floor finishing (thickness as indicated) and making good floor complete all as specified incl cutting to the flush pipe and necessary repair to the floor complete all as specified and directed. |
| 23 | S&F in repairs PVC Flushing Cistern 10 litre capacity, Low Level Valve Less, syphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of MS Brackets,CP flush bend including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed. |
| 24 | M&L 75mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection including finishing even and smooth w/o using extra cement laid in bays including joints filling with sealing compound Grade \\"A\\" complete all as specified and directed. |
| 25 | M&L 75 mm thick PCC (1:4:8 ) type D-2 (using 40mm graded crushed stone aggregate) as in sub base finished even and rough complete all as specified and directed. |
| 26 | M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in level course including finishing in cement concrete surface even and rough to receive screed bed complete all as specified and directed. |
| 27 | Demolition Stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc.complete all as specified and directed . |
| 28 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc. complete all as specified and directed. |
| 29 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed of 20 mm thick 1:3 complete all as specified and directed. |
| 30 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 31 | M&L Mirror polished Kota Stone slab flooring 20-25 mm thick over and including cement screed bed 20 mm thick 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 32 | M&L mirror polished Kota Stone slab 20-25 mm thick in riser of steps, skirting, dado and, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with backcoat of screed bed, rounding of edges over and including bedding layer 10mm thick 1:3 and pointed in white or coloured cement to match complete all as specified and directed. |
| 33 | M&L Joint free Non - skid coloured ceramic tiles not less than 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over and including screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed dismantling old tiles. |
| 34 | M&L Joint free Non - skid coloured ceramic tiles not less than 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in skirting/dado or vertical surfaces with back coat of screed bed or bedding layer of 10 mm thick 1:4 in CM and pointed in white or coloured cement to match complete all as specified and directed including dismantling old tiles. |
| 35 | M&L Joint free Non - skid coloured ceramic tiles not less than 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and directed including dismantling old tiles. |
| 36 | M&L Glazed coloured ceramic tiles in verticle surfaces 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match with backcoat of screed bed or bedding layer 10mm thick 1:4 in CM and pointed in white or coloured cement to match complete all as specified and directed including dismantling old tiles. |
| 37 | S&F selected quality looking mirror bevelled edge 5.5mm thick selected quality glass, mounted on 6mm thick commercial plywood, including moulding of all round edges of looking mirror and fixed to wooden plug with appropriate nos CP brass screwed cup washers complete all as specified and directed. |
| 38 | M&L premium paving tiles of techno commercial or equivalent of size 40cm x 40cm x 10-12 mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15 mm thick bedding layer in Cement Mortar 1:6 complete all as specified and directed. |
| 39 | Taking up or down GI Water Tubing/PPR pipes 15/16mm dia (bore) including Connections and Fittings, segregating serviceable Pipes & Fittings and Stacking properly at Site(s) for re-use, complete all as specified and directed. |
| 40 | -ditto- all as per Item No. 39 here–in–before, but for 25mm dia (Bore). |
| 41 | M&L for 3-layer PP-R (Polypropylene random copolymer) outer diameter of pipes 20 mm (Inner dia 14.40 mm) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc. complete all as specifieda and directed. |
| 42 | -ditto- all as per Item No. 41 here–in–before, but outer diameter of pipes 32 mm (Inner dia 23.20 mm) . |
| 43 | M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and directed. |
| 44 | S&F 32mm dia (Outer dia of pipes in mm) PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed. |
| 45 | M&L Lagging to pipes used in internal water supply (internal dia of pipe 25mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 complete all as specified and directed. |
| 46 | Dismantling water tanks of capacity exceeding 1000 but not exceeding 2000ltrs complete all as specified and directed. |
| 47 | Supply & fixing rotational moulded polythene water storage tanks tripple layer (cylindrical vertical with closed top) hoisted and fixed in postion 2000 ltrs capacity with and including 20mm dia ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum weight 210 gram complete all as specified and directed. |
| 48 | S&F in repairsVitreous China Urinal, full stall type, including, urinal spreader, waste coupling and waste pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, grating and union for discharge pipe complete all as specified and directed. |
| 49 | S&F in repairs 15mm dia bib taps CP Brass with screwed down, screwed for iron pipe of bore 15mm complete all as specified and directed. |
| 50 | S&F in repairs Angle Cock,15mm fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. |
| 51 | S&F in repairs Brass chromium plated shower rose 125mm size with 225 mm Flange, swivel joints, including fixing to steel pipe or union complete all as specified and directed. |
| 52 | S&F in repairs Tubular towel Rail CP Brass, chromium plated D type with CP Brackets, 600 mm long between flanges complete all as specified and directed. |
| 53 | S&F Corner Glass Shelf 300mm (with ABS Brackets) as approved by GE complete all as specified and directed. |
| 54 | S&F in repairs Brass CP Wall mixer for mixing hot & cold water (2 in 1) screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed. |
| 55 | S&F in repairs Brass CP Sink Mixer with regular spout for mixing hot & cold water screwed down for iron pipe and fixed bore of pipe 15mm complete all as specified and directed. |
| 56 | S&F Soap Dish Stainless Steel of suitable size complete all as specified and directed. |
| 57 | S&F Peg Set of 6 Stainless Steel as approved by GE complete all as specified and directed. |
| 58 | S&F PVC Connections 15mm size with PTMT Nuts of length 600mm and fixed, complete all as specified and directed. |
| 59 | Dismantling of PVC / CI pipe 100mm dia jointed in cement mortar and taking out of trench if required complete all as specified and directed. |
| 60 | Dismantling of PVC / CI pipe 75mm dia or less jointed in cement mortar and taking out of trench if required complete all as specified and directed. |
| 61 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floors and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 62 | S&F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 63 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints laid in trenches or in floorsand making good with cement mortor 1:3 or with PCC 1:2:4 complete all as specified and directed. |
| 64 | S&F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls and making good with cement mortor 1:3 complete all as specified and directed. |
| 65 | S&F in repairs PVC 110 mm bore Bend complete all as specified and directed. |
| 66 | S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal with access door in 110 mm bore complete all as specified and directed. |
| 67 | S&F in repairs PVC 75 mm bore Bend complete all as specified and directed. |
| 68 | S&F in repairs PVC 75 mm bore Bend with access door complete all as specified and as directed. |
| 69 | S&F in repairs PVC (SWR) junction single, (Single T) equal or unequal with access door in 75 mm bore complete all as specified and directed. |
| 70 | S&F in repairs PVC (SWR) vent cowl 110 mm bore complete all as specified and directed. |
| 71 | S&F in repairs for PVC (SWR) floor/Nahani trap 75 mm dia outlet, plain with grating including jointing with solvent cement to waste pipe, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 72 | S&F in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed |
| 73 | Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 74 | Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed. |
| 75 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of GE. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 76 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of GE complete all as specified and directed.Note: stainless steel butt hinges and necessary S S screws shall be paid separately. |
| 77 | S&F Pressed steel frames size of frame 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed. |
| 78 | S&F 35mm thick plain, frame 2nd class hard wood panelled shutter (any no of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed. |
| 79 | S&F 35 mm thick, 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as specified and directed. |
| 80 | M&L PCC 1:3:6 type C-1(using 20mm graded crushed stone aggregate) for bed block for fixing hold fast complete all as specified and directed. |
| 81 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. Please Enable Macros to View BoQ information |
| 82 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed. Please Enable Macros to View BoQ information |
