|
| 1 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item here under. |
| 2 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item here under |
| 3 | Dismantling timber scantlings 40 sq. cm and over in section, Framed work, in any position complete all as specified and directed. |
| 4 | Dismantling timber scantlings 40 sq. cm and over in section, Un-Framed work, in any position complete all as specified and directed. |
| 5 | Demolition of cement concrete unreinforced in ground floors and pavings n'exc 15cm thick below or above GL complete all as specified and directed |
| 6 | M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection, finishing surfaces even & smooth without using extra cement including filling of construction joint with bituminous sealing compound complete all as specified and directed. |
| 7 | M&L for PCC 1:4:8, type D2(using 40mm graded stone aggregate) as in foundations/ mass concrete etc complete all as specified and directed. |
| 8 | Demolition of brick work or stone/ boulder masonry work built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 9 | M&L for Brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in Cement mortar 1:4 complete all as specified and directed. |
| 10 | Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 11 | M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 12 | M&L for 10mm thick rendering in cement mortar 1:4 mixed with liquid water proofing compound @ 200ml per 50 kg bag of cement on brick / concrete/ stone walls, surfaces finished even and fair without using extra cement, complete all as specified and directed.Note : Water roofing compound shall be measured and paid separately in respective item of this BOQ |
| 13 | Supply only liquid water proofing compound for mixing in cement mortar or PCC complete all as specified.Note : (i) The WPC compound specified in any item of this BOQ or ordered by Engineer-in-charge (if not mentioned in BOQ item but technically required shall only be measured and paid under this item.(ii) Contractor shall provide purchase vouchers for full quantities incorporated in the work and Engineer-in-charge shall keep defaced purchase vouchers in record and entered the same in MB |
| 14 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 15 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx. thickness 1mm) on newly plastered surface of wall as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 16 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 17 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 18 | Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed. |
| 19 | M&L for fully vitrified ceramic coloured tiles in floors etc, 8 to 10mm thick, area of each tiles exc 0.36 sqm but n'exc 1.20 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 20 | Ditto all as per item no. 20 above but in dado / skirting etc. over and including 10mm thick rendering in cm (1:4). |
| 21 | M&L for coloured designer vitrified tiles heavy duty exterior grade, heavy duty (ENDURA OR Equivalent), area of each tile exc 0.11Sqm but n;exc 0.18Sqm, laid in floors etc over and including 15 mm thick screed bed in cement mortar 1:6, set and jointed in floor and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed. |
| 22 | M&L for glazed ceramic tiles of size 600x 300 x 7 mm thick,(joint free (rectified)) coloured, on vertical surfaces such as skirting / dado etc, laid over and including 10mm thick rendering in cm (1:4) ,set and jointed in neat cement slurry and pointed in white/ coloured cement to match the existing surface complete all as specified and directed. |
| 23 | M&L for non-skid coloured ceramic tiles in floors, 7 to 8 mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour/shade over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 24 | Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid, bedded and pointed in any mortar complete all as specified and directed. |
| 25 | M&L for machine cut Kota stone slab 18mm to 20 mm thick, as in flooring (size not less than 550x550mm), laid over and including 20mm thick cement screed, jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and mirror polishing complete all as specified and directed. |
| 26 | M&L machine cut kota stone slab 18-20mm thick as in skirting, steps riser etc (size not less than 1200x600mm) laid over 10mm thick plaster in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing complete all as specified and directed. Please Enable Macros to View BoQ information |
| 27 | M&L machine cut kota stone slab 18-20mm thick as in skirting, steps riser etc (size not less than 1200x600mm) laid over 10mm thick plaster in CM (1:4), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing & polishing complete all as specified and directed. Please Enable Macros to View BoQ information |
