|
| 1 | Demolition of cement concrete (un reinforced ) in ground floors and pavings n.exc 15cm thick (below or above ground level ) all as specified and removing debris ouside MD land complete all as specified and directed by engr-in-charge. |
| 2 | Material & Labour 100mm thick PCC 1:4:8 type D2 using 40mm graded crushed stone aggregate as in flooring and finished surface complete all as specified and as directed. |
| 3 | Material & Labour 25mm thick PCC 1:2:4 type B-0 using12.5mm graded scrushed tone aggregate as in flooring and finished surface as in received tiles complete all as specified and as directed. |
| 4 | M&L for Vitrified tiles (light shade) 8 mm thick in size of 600mmx600mm as in floors/skirting/dados set and jointed in neat cement slurry and pointed in white or coloured cement to match and laid over and including15mm thick cement screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge. |
| 5 | M&L for colored Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and including 15mm thick cement plaster in CM 1:4 below tiles, complete all as specified and/or as directed by Engr-in-Charge. |
| 6 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but notexceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to matchand including 15mm thick cement plaster in CM 1:4 below tiles, complete all as specified and/or as directed by Engr-in-Charge. |
| 7 | Supply and fixing factory-made 40mm thick Puf (Polyurthane Foam) insulated composite wall panels, having a rigid Puf core of minium density 40 Kg/Cum, injected between two metal skins. The exterior (top) skin shall be 0.50mm thick pre-painted galvanized Iron (PPGI) and the interior (bottom) Skin shall be 0.40mm/0.50mm thick PPGI. |
| 8 | Taking down chowkhat or frame with shutters (without taking of shutters from the frame) exc 1.5 sqm each but not exc 4 sqm each any type of door (wooden, aluminium & steel etc) complete all as specified and/or as directed by Engr-in-Charge. |
| 9 | M&L for plain sheet glass 4mm thick ordinalry quality and glazing with oil putty or wooden beads in square or fixed with aluminium section including rubber beads not exc 0.50 sqm in each pane including hacking out complete all as specified and as directed by Engr-in-Charge. |
| 10 | S&F Door closer hydraulically regulated designation No 3 universal type, aluminium body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed and fixed complete all as specified and directed. |
| 11 | S & F 35mm thick 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkhats, complete all as specified and/or as directed by Engr-in-Charge. |
| 12 | M&L for two coats of synthetic enamel paint over one coat of pink primer on new decorated wooden surfaces including preperation |
| 13 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section. |
| 14 | S&F 150mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by engr-in-charge. |
| 15 | S&F in 150mm long anodized aluminum door handle cast type complete all as specified and directed by engr-in-charge. |
| 16 | S&F 100mm long mild steel medium weight but hinges cold rolled complete all as specified and directed by engr-in-charge. |
| 17 | Dismantling wall and ceiling boards (Fiber, pulp, insulation, blankets) any thickness including covered fillets and supporting members complete all as specified and directed by engr-in-charge. |
| 18 | M & L Prelaminated particle board 9mm thk fix in walls interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed by engr-in-charge. |
| 19 | S&F for 2nd class Hard wood clean sawn as in scantling fixed with nails including dismantling complete all as specified and directed by engr-in-charge. |
| 20 | S&F in repairs 2nd class softwood clean sawn as in scantling fixed with nails exceeding 06 Sqcm and n.exc 13 Sqcm in section including dismantling complete all as specified and directed by engr-in-charge. |
| 21 | S&F in repair Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm complete all as specified and directed by engr-in-charge. |
| 22 | M & L for providing and fixing Gypsum boards 9 mm thick PVC film on the face side and other side metalised polyster flim as in ceilings fixed with screws as per manufacturers instructions including anodised aluminium powder coated snap grid frame work of size 605 x 605 mm with anodised aluminium channel supports/ angles/ 'T' (Main tee 35 x 25 x 1.5 mm, cross tee 25 x 25 x 1.4 mm and wall angle 32 x 32 x 2 mm) fixed with screws/ plugs etc including GI suspenders of 6mm dia upto 1200 mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size as per approved pattern and design complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repair 3 layer PP-R Polypropyene ransom copolymer outer dia of pipe 25 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to wall s, ceilings or in floors etc, includig taking down 25 or 32mm steel tubing pipe complete all as specified and directed by engr-in-charge. |
| 24 | S&F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.complete all as specified and directed by Engr-in-charge |
| 25 | S&F in repair15 mm bore Angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe and fixed complete all as specified and directed by engr-in-charge. |
| 26 | S&F PVC connection 15mm size with PTMT nuts of length 450 fixed complete all as specified and directed by engr-in-charge. |
| 27 | S&F in repair bib taps,15mm bore cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by engr-in-charge. |
| 28 | Supply and fix in repair 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe all as specified and directed. |
| 29 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed by engr-in-charge. |
| 30 | S&F in repairs viterous China wash down water closet pan (pedestal pattern white) (excluding flushing cistern and flush pipe) including plastic water closet seat, black, closed pattern with flat bottom, 'P' or 'S' pattern and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 31 | S & F in repair of PVC low level white flushing cistern 10 litre capacity valve less, syphonic action type, complete with inlet, ball valve, float valve, bends, brackets, brass screws, handle etc with flush pipe of polyethylene of low density 32 mm dia of suitable length and making all connection complete all as specified and directed. |
| 32 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 33 | S&F in repair 600 x 450 mm beveled edged mirror of selected quality mounted on 8mm thick ply with chromium plated brass screw and cup washers and fix in repairs complete all as specified and directed by Engr-in-charge. |
| 34 | S&F in repair Viterous China WHB 550 x 400 mm flat back including cutting for and pinning in ends of brackets or erecting stand Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by engr-in-charge. |
| 35 | S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed by engr-in-charge. |
| 36 | S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint laid in trenches or in floors complete all as specified and directed by engr-in-charge. |
| 37 | M&L for coloured chequred cement concrete tiles, machine pressed, factory made of size 300mm X 300mm X 25mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & no pigments and laid over and including 15 mm thick cement screed bed (1:4) complete all as specified and as directed by Engr-in -Charge. |
| 38 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed by engr-in-charge. |
| 39 | Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc complete all as specified and directed. |
| 40 | M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable FRLS of size 1.5 sq mm for earth continuity in and including PVC conduit not less than 20 mm dia with all fittings of approved size and quality in concealed manner before executing wooden panelling including fixing of PVC moulded box with modular white/Golden Pecan cover plate with frame suitable for modular fittings including all accessories as required for modular fittings complete all as directed and specified. |
| 41 | All as per Item No 40 but for one 3 pin socket outlet, 5 Amps on the same board with other switches, with cables 1.5 Sqmm size complete all as directed and specified. |
| 42 | All as per Item No 40 but for one 3 pin socket outlet, 5 Amps Independent with cables 1.5 Sqmm size complete all as directed and specified. |
| 43 | Same as item No 40 above for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly complete all as directed and specified. |
| 44 | M&L for Modular switch colour white/Golden Pecan one way single pole 6 Amp 1 module 240 volts. Make : Anchor/Havells/Cona |
| 45 | M&L for Modular switch colour white/Golden Pecan one way single pole 16 Amp 1 module 240 volts. Make : Anchor/Havells/Cona |
| 46 | S&F for Modular colour white/Golden Pecan socket 6/16 A -2/3 Pin combined 2 module 240 Volt, Make:Anchor/Havells/Cona |
| 47 | S&F for Modular socket colour white/Golden Pecan 6 A -2/3 Pin combined 2 module 240 Volt, Make:Anchor/Havells/Cona |
| 48 | S&F ceiling rose surface bakelite two or three terminal all as specified and directed by Engr-in-Charge. |
| 49 | Supply and fixing in replacement of LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 50 | Supply and fixing in replacement of LED lights fitting 1x 10W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 51 | Supply and fixing in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete ( white/ warm white) with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 52 | S&F in replacement of MCB DB SPN Regal Gray 12 Way double door 240Volt 50Hz with complete accessories. Make : Havells / ABB/Schenider |
| 53 | S&F in replacement of MCB SP 6 to 32 Amps 'C' series complete all specified and directed by Engr-In-Charge. |
| 54 | S&F in replacement of MCB SPN 40-63 Amps 'C' series complete all specified and directed by Engr-In-Charge. |
| 55 | S&F for sub main wiring with 2 runs of FRLS PVC insulated multistrand, copper conductor cable of size 2 x 6 sq. mm +1x 10 sqmm PVC insulated cable 1100 volts multi stranded copper conductor as earth wire complete all as specified and directed. |
| 56 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. Please Enable Macros to View BoQ information |
| 57 | Supply and fix in replacement of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm sweep all as specified and directed. Please Enable Macros to View BoQ information |
