|
| 1 | CONSTRUCTION OF MARKET SHED : Item No. 1/2.1:- Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.(a) All kind of soil |
| 2 | Item No. 6/4.1:- Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 4.1.5 : PCC 1:3:6 |
| 3 | Item No. 7/6.1:-Brick work with common burnt clay F.P.S. ( non-modular) bricks of class designation 7.5 in foundation and plinth in:6.1.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Item No. 8/2.25(a):-Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 5 | tem No. 9/5.2:- Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 5.2.2:- 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 6 | tem No. 10/4.1:- 52 mm CC flooring with conc. Hardener topping, under layer 40 mm thick CC 1:2:4..complete |
| 7 | Item No. 11/5.22:- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. (ii) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 8 | Item No. 12/5.22:- Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (ii) Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Item No. 13/5.9:- Centering and shuttering including strutting, propping etc. and removal of form for 5.9.1:- Foundations, footings, bases of columns, etc. for mass concrete |
| 10 | 5.9.5:- Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 11 | Item No. 14/4.10:- Providing and laying DPC 40 mm thick with CC 1:2:4 derived from natural sources. |
| 12 | Item No. 15/13.2.1:- 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : (a) In Proportion 1:4 (1 Cement : 4 Sand) |
| 13 | Item No.16/10.2:-Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 14 | Item No. 17/13.52:- Finishing with Epoxy paint at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc.,complete. |
| 15 | Item No.18/12.5 :-Providing and fixing precoated galvanised iron sheets 0.50 mm total coated thickness with zinc coating 120 grams/sqm as per IS: 277…incl cutting to size and shape wherever required. |
| 16 | Item No. 19/12.51:- Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 total coated thickness, zinc coating 120 grams/sqm as per IS: 277..screws complete. |
| 17 | Item No. 20 :- Cement plaster skirting upto 30 cm height, with cement mortar 1:3 finished with a floating coat of neat cement 18 mm thick. |
| 18 | Item No. 21/13.43:- applying one coat of water thinable cement primer of approved brand and manufacturer on wall surface. |
| 19 | Item No. 22/13.44:- Finishing walls with water proofing cement paint of required shade : |
| 20 | Item No. 23/4.17:- Making plinth protection 50 mm thick of CC 1:3:6 derived from derived sources…finishing the top smooth. |
| 21 | Cost of Sign Board Please Enable Macros to View BoQ information |
