|
| 1 | 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified. |
| 2 | Brick work ( Modular Bricks ) with flyash bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6), complete all as specified. |
| 3 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends, or edges of landings etc. and cutting chases for concealed water tubing, concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, in brick walls, complete all as specified. |
| 4 | Factory made 35 mm thick ,2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a);,etc complete all all as specified. |
| 5 | Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, thickness 30 mm,etc complete all all as specified. |
| 6 | Factory made solid PVC Door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with mild steel square tube, supplying & fixing in opening, complete all as specified. |
| 7 | Factory made solid PVC moulded door shutter, 28-30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded woodgrain printed PVC Sheet on the front face & 2 mm thick woodgrain printed colur PVC sheet on back face, complete all as specified. |
| 8 | Factory made, 35 mm thick, second class hard wood, plain framed, hammer marked, panelled shutter (one panelled) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete, all as specified. |
| 9 | 18/19 mm thick PVC board Rajshree Celuka ply or equivalent as approved of grade 1 quality with both side plain white or coloured fixed with stainless steel screws , solvent cement/adhesive to fabricate kitchen cabinet sides, top and bottom, door shelf inside the cabinet and drawer and all fittings complete all as per manufacturer's instructions and as directed by Engg-in-Charge.NOTE :- (i) Each member i.e. top and bottom, door, shelf inside the cabinet and drawer etc. shall be measured.(ii) Hinges, wire gauge and handles shall be measured and paid for separately. |
| 10 | Prelaminated particle board of 18/19 mm thick, interior grade, prelaminated one side with decorative choice lamination other side balancing white lamination. Fixed with screws to timber frame work complete all , IN REPAIR , as specified and as directed. |
| 11 | Auto closing stainless steel (Grade 304) hinges 35 mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters of make as approved, IN REPLACEMENT, complete all as specified. |
| 12 | Aluminium anodised barrel tower bolt of extruded section 125mm long, ISI marked, complete all as specified. |
| 13 | Aluminium anodised barrel tower bolt of extruded section 125mm long, ISI marked, IN REPLACEMENT, complete all as specified. |
| 14 | Aluminium anodised barrel tower bolt of extruded section 200mm long, ISI marked, complete all as specified. |
| 15 | Aluminium anodised barrel tower bolt of extruded section 200mm long, ISI marked, IN REPLACEMENT, complete all as specified. |
| 16 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long, complete all as specified. |
| 17 | Aluminium alloy, anodised, ISI marked sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300 mm long, IN REPLACEMENT, complete all as specified. |
| 18 | Stainless steel 75mm long butt hinges with stainless steel screws, ISI marked, complete all as specified. |
| 19 | Stainless steel 75mm long butt hinges with stainless steel screws, ISI marked, IN REPLACEMENT, complete all as specified. |
| 20 | Stainless steel 100mm long butt hinges with stainless steel screws, ISI marked complete all as specified. |
| 21 | Stainless steel 100mm long butt hinges with stainless steel screws, ISI marked, IN REPLACEMENT, complete all as specified. |
| 22 | Mild steel helical door spring 300 mm, ordinary rat tail rod pattern including roller and roller plate, ISI marked complete all as specified. |
| 23 | Mild steel helical door spring 300 mm, ordinary rat tail rod pattern including roller and roller plate, ISI marked, IN REPLACEMENT, complete all as specified. |
| 24 | Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws,complete. |
| 25 | Double leg aluminium anodised door stopper with rubber foot, ISI marked and fixed to bottom rail of doors with steel screws, IN REPLACEMENT, complete. |
| 26 | Stainless steel conduit 25 mm bore, cut to size and erected in position as curtain rod on backets, with & including SS decorative finials & brackets, PVC rings @ 10 nos. per metre, fixed to walls with PVC rawl plugs & SS screws, IN REPLACEMENT, all as specified.. |
| 27 | Hasp and staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws of size 100 mm, ISI marked, IN REPLACEMENT complete all as specified. |
| 28 | Extruded aluminium anodised handles fabricated type with plate 100 mm long, ISI marked, IN REPLACEMENT, complete all as specified. |
| 29 | Extruded aluminium anodised handles fabricated type with plate 125 mm long, ISI marked complete all as specified. |
| 30 | Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked complete all as specified. |
| 31 | Extruded aluminium anodised handles fabricated type with plate 150 mm long, ISI marked, IN REPLACEMENT, complete all as specified. |
| 32 | Stainless steel handle of 100 mm size for kitchen cabinet shutter, IN REPAIRS, complete all as specified. |
| 33 | Aluminium (Die cast) door closer hydraulically regulated designation No. 2 aluminium body universal type suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 kg, ISI marked, IN REPLACEMENT, complete all as specified. |
| 34 | Powder coated aluminium frame for doors, windows, ventilators, fixed glazing with one or more rebates including joining cleat for fixing, fixed to opening with suitable size steel screws and rawl plugs etc., (aluminium section not less than 2 mm) complete all as specified. |
| 35 | Powder coated aluminium door shutters with styles & rails , anodised alumnium glazing snap beading, rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified. NOTES: (a) Each shutter shall have 2 Nos. 125 mm long almn handles and 03 No. 75 mm size stainless steel/almn butt hinges.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 36 | Powder coated aluminium window and ventilator shutters side hung type with styles & rails , anodised alumnium glazing snap beading , rubber neoprene packing including joining cleats & screws etc as per manufacturers instructions, complete all as specified. NOTES: (a) Each shutter shall have 2 Nos. 125 mm long almn handles and 02 No. 75 mm size stainless steel/almn butt hinges & one no. almn hook & eye.(b) Glass and other filling materials in panels including wire cloth and almn grill shall be measured & paid for separately under respective item of BoQ.(c) For powder coated aluminum sections minimum thickness of powder coating shall be 50 micron. |
| 37 | Pressed steel frames of size 105 mm x 60 mm made out mild steel 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified. |
| 38 | Pressed steel frames of size 125 mm x 60 mm made out mild steel 1.25 mm thick, for doors with one or more rebates including necessary fixing lugs, 100 mm size medium grade mild steel hinges, lock strike plates etc including providing PCC (1:3 :6) type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified. |
| 39 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples, all as specified. |
| 40 | Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with tinned tacks or steel wire staples IN REPLACEMENT, all as specified. |
| 41 | 100 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & smooth using extra cement , complete all as specified. |
| 42 | Granite any shade, 15-17 mm thick,as in step, jambs, cooking platform and like, machine cut, machine polished, bedded and jointed with grey cement slurry & pointed with grout of matching shade including cutting holes for gas pipe, necessary cutting over & including 10 mm thick (average thickness) cement mortar (1:4), complete all as specified. |
| 43 | Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish), complete all as specified. |
| 44 | Glazed ceramic coloured pattern tiles 7-8 mm thick, area of each tile exc. 0.13 Sq.m but n. exc. 0.19 Sq.m on vertical surfaces as in skirting, dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 10mm thick rendering in cement mortar (1:4) including necessary cutting as per site requirement complete all as specified |
| 45 | Non skid ceramic coloured pattern tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.06 Sq.m but n. exc. 0.11 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:6), complete all as specified. |
| 46 | Vitrified Ceramic tiles dark shade pattern tiles 8 to 9 mm thick (square/ rectangular) area of each tile n. exc. 0.36 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:6), complete all as specified. |
| 47 | Non skid ceramic coloured pattern tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.18 Sq.m but n. exc. 0.38 Sq.m, laid in floors etc, set and jointed in neat cement slurry and pointed with grout of matching shade of tiles, laid over and including 15 mm thick bedding layer in cement mortar (1:6), complete all as specified. |
| 48 | Rendering 5 mm thick on RCC or similar surfaces, finished even and smooth on ceilings in cement mortar (1:3), including taking down existing cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 49 | Rendering 15 mm thick on fair faces of brick work or concrete surfaces, finished even and fair on walls in cement mortar (1:6) including taking down existing cement plaster including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 50 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surroundings; glazing with putty or fixed with beads complete all as specified |
| 51 | Figured glass, 3 mm thick, pin head type and glazing with linseed oil pane putty & spring glazing clips, in squares exceeding 0.5 sq.m in each pane complete all as specified. |
| 52 | Sheet glass 3mm thick ordinary quality and glazing with oil putty or wooden beads in squares n. exc. 0.5sqm in each pane complete all as specified. |
| 53 | Rubber door seal fixed with nails all as specified and directed. |
| 54 | Two coats of interior acrylic distemper on new wall surfaces, including prepration of surfaces complete, all as specified. |
| 55 | Three coats of white wash on new ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 56 | Two coats of white wash on old wall surfaces, including preparation of surfaces, complete all as specified. |
| 57 | Two coats of white wash on old ceiling surfaces, including preparation of surfaces, complete all as specified. |
| 58 | One coat of interior acrylic distemper on old wall surfaces and cornices etc, including prepration of surfaces complete, all as specified. |
| 59 | Two coats of interior acrylic distemper on old wall surfaces and cornices etc, including prepration of surfaces complete, all as specified. |
| 60 | Complete removal of existing treatment of any description, including prepration of wall surfaces of any description complete all as specified and applying the following: -(a) Applying wall care putty, in two layer & smoothening the surfaces as specified. (preparatory to paint as directed). (b) Two coats of interior acrylic distemper over and including a coat of primer. |
| 61 | Peparation of old painted steel & iron surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 62 | Preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat (finishing coat) of synthetic enamel paint complete all as specified. |
| 63 | Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over & including a coat of pink primer complete all as specified. |
| 64 | 500 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN REPLACEMENT,, complete all as specified including the following acessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP, complete all as specified. |
| 65 | 1000 litre capacity, white, three layered polyethylene water storage tanks (cylindrical vertical with threaded lid) including hoisted and fixed in position, making connections, IN REPLACEMENT,, complete all as specified including the following acessories: -(i) PTMT ball valves, high pressure, with epoxy coated aluminium rod & high density plastic ball complete screwed for iron pipe or brass ferrule and fixed, suitable for 20 mm bore GI pipe, complete all as specified.(iii) Gun-metal stop valve (quarter turn type) with MS lever handle, suitable for GI tubes 20 mm bore, ISI marked, screwed both ends for iron pipe, complete all as specified.(iv) Provn of 20 mm bore GI light grade tube from O/H tank to nearest mouth of RWP,complete all as specified. |
| 66 | Wall mixer,( Wash hand basin ) , cast copper alloy, chromium plated fancy type, quarter turn type, decorative type screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete |
| 67 | C P wall mixture with L bend, IN REPLACEMENT, complete all as specified and directed. |
| 68 | Brass CP kitchen sink mixer 15 mm dia for mixing hot and cold water screwed down for iron pipe and fixed, IN REPLACEMENT complete all as specified and directed. |
| 69 | PVC bath cabinet with mirror of size 450mm x 300mm x 120 mm fixed to wall with screw and rawal plug etc., IN REPLACEMENT complete all as specified and directed |
| 70 | Angular stop valve/cock (Weight not less than 575gms), cast copper alloy, chromium plated, with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 71 | Concealed stop valve/cock (Weight not less than 575gms), cast copper alloy, chromium plated, with wall flange, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 72 | Bib tap, cast copper alloy (Weight not less than 575gms), chromium plated fancy type, long body with wall flange, quarter turn type, screwed end for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPAIRS, complete. |
| 73 | Pillar tap, cast copper alloy (Weight not less than 665gms), chromium plated Decorative type, quarter turn type, screwed down for iron pipe or for union and fixed, suitable for 15 mm bore pipe, IN REPLACEMENT, complete. |
| 74 | Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm, ISI marked, white, with integral foot rests (excluding flushing cistern and flush pipe), 110x125 size uPVC 'P' trap & necessary joints, lime concrete, IN REPAIRS, complete all as specified. |
| 75 | Vitreous china wash down water closet pan (pedestal pattern), ISI marked, white (excluding fixing bolts, flushing cistern and flush pipe ) including plastic pipe water closet seat (white or black in colour ) , closed pattern with flat bottom , and cover and mild steel chromium plated or cluminised hinging device also making good to floor, IN REPLACEMENT, complete all as specified. |
| 76 | Vitreous China wash basin, white, flat back, size 550 x 400 mm, ISI marked, including fixing acessories like rag bolts etc. with CP waste coupling half or full threaded suitable for & including 32 mm size PVC solid waste pipe, IN REPLACEMENT, complete all as specified. complete all as specified. |
| 77 | PVC low level flushing cistern 10 litre capacity, syphonic action type, any shade, dual flush, ISI marked with flush pipe and all fixing acessories, IN REPLACEMENT, complete. |
| 78 | Overhead ABS 100mm shower with brass arm 225 mm long with flange and fixed in position, IN REPAIRS, complete.MAKE: PRAYAG CPOH-3 or equivalent make mentioned in Appndix 'B'. |
| 79 | Stainless steel PVC kitchen sink coupling, chrome finish, Rust free, corrosion resistant durable having top dia 114 mm and bottom dia 40 mm steel sheet thickness 0.8-1.00 mm , item weight 200-250 gm, with all internal fittings ( Basket strainer, stainer washer, bolt drain body, drain body washer, leak protection shell, locking nut, IN REPLACEMENT complete all as specified and directed. |
| 80 | Plastic water closet seat cover black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumsed hinging device, IN REPLACEMENT, complete all as specified and directed. |
| 81 | Wash hand basin / kitchen sink PVC waste pipe, superior quality, threaded dia 40mm bore, IN REPLACEMENT, complete all as specified and directed. |
| 82 | Urinal PVC waste pipe, superior quality, 32mm bore complete all as specified and directed. |
| 83 | Health faucet CP brass body with wall hook and 1 metre SS tube, IN REPAIRS, complete.MAKE: PRAYAG Cat No. CPHF-7 or equivalent make mentioned in Appndix 'B' |
| 84 | Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug, Washers, waste pipe washers including cantilever cast iron brackets connecting union etc overall size 915mm x 460mm with bowl size 410mmx 300mm x 160mm, IN REPLACEMENT, complete |
| 85 | Stainless Steel kitchen plate rack of sheet thickness not less than 0.85 mm overall size 610 x 760 x 254 mm, fixed on walls wth PVC plugs and SS screws, IN REPAIRS, complete.Note:- Pattern of plate rack to be approved by GE. |
| 86 | Looking mirror 600 x 450 mm, selected quality glass 6 mm thick, mounted on PVC ply not less than 6 mm thick, and provision of PVC frame alround fixed with chromium plated brass screws and rawl plugs, IN REPLACEMENT, complete |
| 87 | Glass shelf 500x125 mm with brass brackets and fixed to wall with chromium plated brass screws and rawl plugs, complete. MAKE: PRAYAG Cat No. CPA-31 or equivalent make mentioned in Appendix 'B'. |
| 88 | Brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flanges fixed with wall IN REPAIRS, complete. |
| 89 | Stainless steel soap dish, fixed to wall with SS screws and PVC rawl plugs, completeMAKE: PRAYAG Cat No. CPA-48 or equivalent make mentioned in Appndix 'B'. |
| 90 | PVC connections 15 mm size of length 300 mm with PTMT nuts, IN REPLACEMENT, complete all as specified |
| 91 | PVC connections 15 mm size of length 450 mm with PTMT nuts, IN REPLACEMENT, complete all as specified |
| 92 | PVC connections 15 mm size of length 600 mm with PTMT nuts, IN REPLACEMENT, complete all as specified |
| 93 | uPVC pipes, 110 mm external dia pipe, type-A, ISI marked (IS:13592) single socketed in any length with or without rubber ring joints, fixed to wall with PVC brackets as SWR / Rain water pipes, IN REPLACEMENT , complete all as specified |
| 94 | uPVC/PVC bends any radius, complete all as specified. suitable for uPVC soil waste discharge pipes 110 mm external dia. |
| 95 | Dewatering the over head water tank and then cleaning and removing all scales and dirt silt etc from water tank, removing lid and refixing the same in same position without disturbing pipe line system and float valve and making functional after cleaning and writing “cleaned on ..... .... (Date, month & year)“ format with white painting complete including removing of all previous writing all as specified of following capacity:-NOTE:- (i) Register to be maintained by contractor with user signature after completion of work.(ii) Ladder to be arranged by contractor (rate included in this item) where ever unaccessible roof is there upto a height of 12m. |
| 96 | Up to 500 Litre |
| 97 | Exc 500 but n exc 1000 Litre |
| 98 | PVC water storage tank cover with fitting, IN REPLACEMENT, complete all as specified of capacity: - |
| 99 | 500 Litre |
| 100 | 1000 Litre |
| 101 | PTMT valve, high pressure with polythene float and flynut complete screwed for iron pipe or brass IN REPLACEMENT all as specified as following dia:- |
| 102 | 15mm dia |
| 103 | 20mm dia |
| 104 | 25mm dia |
| 105 | Gun metal globe/gate valve, 20mm dia with iron wheel head, ISI marked , screwed both ends for GI tubes, IN REPLACEMENT, complete all as specified |
| 106 | Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified of size: - |
| 107 | 15mm dia |
| 108 | 20mm dia |
| 109 | Steel tubes ‘medium grade’, galvanized with all fittings and fixed to walls and ceilings or laid in floors, including cutting chasing for new pipe & taking down existing tube complete all as specified of sizes: - |
| 110 | 15mm dia |
| 111 | 20mm dia |
| 112 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified of sizes: - |
| 113 | 16mm dia |
| 114 | 20mm dia |
| 115 | Demolition and Dismantling work |
| 116 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area not exceeding 1.50 Sq.m each and removing from site all as specified. |
| 117 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sq.m but not exceeding 4.00 Sq.m each and removing from site all as specified. |
| 118 | Taking down shutters of any description not exceeding 1.00 sqm each and removing from site all as specified. |
| 119 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and removing from site all as specified. |
| 120 | Taking down shutters of any description exceeding 1.00 sqm but not exceeding 2.00 sqm each and refixing in the same opening after easing adjusting and minor repair complete all as specified. |
| 121 | Taking down old MS window shutter not exc 1 Sqm each including cutting old hinges and refixing in same opening after necessary repair/welding work and changing MS hinges of any type including welding to old frame complete all as specified and as directed. |
| 122 | Taking down cement plaster of any description on brick walls, ceiling or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified. |
| 123 | Demolition brickwork or stone / boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified. |
| 124 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 125 | Demolition of cement concrete (unreinforced) in ground floors and pavings not excceding 15cm thickness (above or below ground level) all as specified. |
| 126 | Note : Amount of credit for retrieved materials is mentioned in Sch of credit of tender documents in pdf form which will be deducted while acceptance of tender offline. Please Enable Macros to View BoQ information |
