Tender For Repair & Renovation Work Of The Existing Hospital Building At Chc, Naktideul Under Ama Hospital (Phase-Ii) Scheme For The Year 2024-2025, Naktideul-Odisha

TDR : 55778785

Tender Notice
BOQ

14 Days Left

Naktideul , Odisha

Tender Brief : Tender For Repair & Renovation Work Of The Existing Hospital Building At Chc, Naktideul Under Ama Hospital (Phase-Ii) Scheme For The Year 2024-2025

Document Fees
₹ 10000 /-

EMD
₹ 109500.0 /-

Tender Value
₹ 1.09 Crore /-

Submission Date
17-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling brick or stone masonry in lime or cement mortar above 3m.height including stacking the useful materials for reuse and removing the debris within 50m. lead including all cost of labour,material,mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
2	Dismantling and removing 2.5 cm thick grading concrete from roof slab cleaning the surface lowering and removing the debris within 50m lead. including stacking the useful materials for reuse and removing the debris within 50m. lead including all cost of labour,material,mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
3	Scraping old paint with scrapers, sand papering andwashing with soap water or soda including scaffolding charges upto 5M height. including stacking the useful materials for reuse and removing the debris within 50m. lead including all cost of labour,material,mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
4	Removing old lime or cement plaster from walls including raking out joints 12 mm deep and removing the debris within 50m lead including all cost of labour,material,mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
5	Dismantling and removing old tiled flooring including removing the base coarse and stacking the useful materials for reuse and removing the debris within 50m lead including all cost of labour,material,mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
6	Dismantling and removing old tiled flooring cladding from wall including racking out joints 12mm deep stacking the useful materials for reuse and removing the debris within 50 meter lead including all cost of labour, material, mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
7	Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking the same for reuse and removing the debris within 50m lead including all cost of labour, material, machineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
8	Dismantling and removing of R.C.C. footing, column, beam, slab, staircase, landing, lintel, etc. all of existing structure and removing the debris within 50mtr lead. Including all cost of labour,material,mechineries, loading & unloading, conveyance & T&P etc. Complete as per the direction of Engineer-In-Charge.
9	Earth work in excavation of foundation trenches in all type of soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.
10	Up to (1.5m to 2m depth)
11	Filling in foundation trenches and plinth, with excavated earth including laying the earth in layers not exceeding 23.5 cm thick ramming & watering with all leads & lifts including cost of all labour,T&P completed as directed by the Engineer-in-charge.
12	Supplying, filling in foundation and plinth with sand in 22.5 cm (9”) thick layers (Measurement will be taken on finished compacted section only). including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge.
13	Providing and laying of Cement Concrete of grade 1: 3 :6 (1cement : 3 sand : 6 graded stone aggregate of size 25mm to 40 mm hard granite crusher broken metal ) , mixing in concrete mixer ,lowering and compacting in proper thickness , watering & curing for the required period .including all cost of labour ,material, conveyance,all taxes & royalities of materials, T & P etc.complete as per the directions of Engineer-in-charge.
14	First class Fly ash Brick masonry using bricks of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
15	Fly Ash. brick masonry of size 23 cm. x 11 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge
16	Second floor
17	RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centring and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as per direction of the Engineer in charge
18	Footings: -
19	Column up to Plinth: -
20	Plinth Beam: -
21	Column up to 3.6: -
22	First Floor
23	Roof Slab: -
24	First Floor
25	Straightening bent up or coiled M.S. rod or HYSD steel (Fe-415 / Fe-500), cutting, bending, cranking, hooking, welding or jointing (if required), the M.S. rod or HYSD steel and binding, tying the grills, hoisting, lowering and placing in proper position as per drawing & design required for R.C.C. works including cost, conveyance and taxes of M.S. rod or HYSD steel and binding wires of 18 to 20 gauge and labour with all T&P required for the work etc. complete as per approved drawing and technical specification and as per clause-1600 of MoSRTH specification for road & bridge works (Latest Revision ) complete in all respect as directed by Engineer-in-Charge.(weight of binding wires will not be considered for payment and payment will be made on weight of M.S. rod or HYSD steel only. Steel bars of only MAJOR INTEGRATED STEEL PLANTS like SAIL, RINL, TATA, JINDAL & SHYAM STEEL, etc. of Fe-415 / Fe-500 grade are to be used in the work & if required original bill of . steel has to be produced by the contractor)
26	First Floor
27	Second Floor
28	Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
29	Second FLoor
30	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
31	Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
32	First FLoor
33	Supplying, fitting and fixing matt finish vetrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved make (JOHNSON / SOMANY/ KAJARIA) in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.
34	Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects.
35	Grouting the joints of flooring vitrified tile 600x600mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resinper kg), including filling / grouting and finishing complete as per direction of Engineer-incharge.(DAR-2023 Vol-1 Clause No-11.48.2(pg-836))
36	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58- 60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately) Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made : Frame size 45 x 85 mm (DAR Cl. 26.86.2)
37	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window / Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Frame size 65 x 125mm (DSR- Cl. 26.86.6)
38	Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 30 mm thick of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainlesssteel butt hinges and necessary S.S screws shall be paid separately) (DAR 2023 vol-1,Cl 26.88, pg-2037)
39	Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.
40	Providing and fixing of UPVC (Un Plasticized Poly Vinyl Chloride)(Make: Fenstech) Ventilator made out of hollow- chambered UPVC Sections having isolated drainage and reinforced throughout with galvanized steel. The ventilator shall be made out of UPVC sections having an overall size of 60mm x 60mm thickness. Structurally Reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2mm with locking system. Prefabricated & welded through fusion welding the window outer frame & sash shall be fitted with 5mm thickness Pin-Head glass of reputed brand (Saint Gobain Glass), weathering sealant & Accessories like louvers made by brand. The outer frame is to be installed at the side using anchor fastener, Silicon Rubber Sealant. At least 15 years manufacturing warranty for discoloration, wrapping, mechanical failures, Shrinkages, Rooting Corrosion etc. with a quality Certificate from relevant departments of that government through the Dealers including of all materials and abounds etc. Complete as per directions of Engineer in-charge.
41	Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
42	Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.
43	First FLoor
44	Second floor
45	Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge.
46	First Floor
47	Second floor
48	Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.
49	First FLoor
50	Second floor
51	Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.
52	Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.
53	Providing & laying of 60mm thick factory made cement concrete interlocking paver block of M35 grade and approved make variety colour and size made by Block making machin with strong vibratory compaction of approved design and shape, laid in required colour and pattern over 50mm thick compacted bed of coarse sand ,filling the joints with fine sand etc.all compelte including cost,conveyance,royalty,taxes of all materials,labour,T & P etc.Complete as per direction of EIC.
54	Supplying and fixing of Pre cast kerb stone of size 300mm x 300mm x 150mm of M-30 grade of approved make, design, colour and size made by Block making machine with proper compaction fixed in required pattern etc. complete in all respect conforming to IS 5758:1984. including cost of Materials, Conveyance, Royalty, of all materials,labour,T & P etc.Complete as per direction of EIC.
55	False ceiling made out of 12mm thick P.O.P. Gypsum board ceiling fixed with frame made out of G.I. perimetre channel runners (Gyp steel make or equivalent branded company) etc. and hanged from R.C.C. Roof slab on 600mm x 600mm grid including cost, conveyance and taxes of all materials with cost of labour and T&P required for the work complete as per direction of the Engineer-in-charge.
56	Providing average 25mm thick grading Concrete with (1:2:2) using 6mm hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge.
57	First FLoor
58	Second floor
59	Polyurethene(PU) Coating of 1.5mm thick Provinding & applying the surface with primer & Providing two coats of liquid applied, solvent-free elastomeric waterproofing membrane, shall be made of hydrocarbon free polyurethane with at least 85% solid content Nitoproof 600PF with necessary surface preparation, coving, primer etc. The waterproofing membrane shall be terminated on the top of parapet walls. including cost of all material, Labour, T&P etc all complete as per the direction of Engineer in charge. (Primer :- Fosroc - Nitoproof WB / Myk -FloArm primer PU/ Sika- Sikalastic PU Primer, Polyurethene :- Fosroc - Nitoproof 600 PF / Myk -AquaArm WPU 1K(E) / Sika- Sika guard 7600 VG)
60	Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. (DAR 2021 vol-I Clause No-9.147.D, pg no.516 )
61	Supplying and fixing of Roman blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 1 mm thick fabric with lining of approved design and quality etc. complete.
62	Providing and Fixing of wall paper of aesthetic design and good quality etc. including cost of all labour, T&P, lead etc. complete as per direction of Engineer in Charge.
63	Providing & Fixing of Louvers panelling made out of 19mm thick BWP plywood with 2\\" batten as support in Horizontal and Vertical Member Placed @ 600 mm C/C and 12mm thick wpc Louvers sheet , All exposed edges should be covered with 1mm thick decorate laminate, including cost of all materials, Labour T&P etc as per direction of Engineer-In-Charge. (Louvers Panel sould be pre approved by Engineer-In-Charge)
64	Fixing Granite Tiles of approved dimension area above 0.4 sqm (20mm thick) in floor, treads of steps and landing on 20mm thick bed of cement mortar (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials complete in all respects as per direction of Engineer-in-Charge.
65	Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required..DSR 2023 P-186 Sl no-12.1.2
66	Supplying fitting and fixing Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. angle iron truss of approved section in roof frame including drilling holes and supplying nuts and bolts with cement concrete (1:2:4) on walls using 12mm to 20mm size black hard crusher broken granite chips (20mm size not exceeding 25%) including watering, curing, cost, conveyance royalties and taxes of all materials complete in all respect. (Payment will be made on the weight of angle iron only and the weight of nuts and bolts will not be taken into consideration).
67	Supplying fitting and fixing R.C.C. (1:2:4) fencing posts with chips 1.68M long 13cm × 13cm at bottom and 8cm × 8 cm at top and 30cm × 30cm × 8 cm base finished smooth including watering, curing, cost, conveyance royalties and taxes of all materials complete in all respect.
68	Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
69	Labour for fixing barbed wire fencing and post by means of staples and straining hooks by means of tying with G.I. wire and including including cost, conveyance royalties and taxes of all materials complete in all respect.
70	Manufacturing, Providing & Installation of GFRC JALI (Glass Fiber Reinforced Concrete), Make 'SAMUDYAM', thickness of 25 mm & border thickness of 50 mm, with Pattern, design, and colour of approved make to be fixed on/between RCC /Block work Column or structural work with Dry Fixing method with appropriate SS Pipe & Cleats frame work, using fasteners, and necessary hardware etc.The element shall be made from '53 grade' Portland Cement make Biria/ 'JK Cement' or equiv alent, Quartz, Fine Silica Sand, Alkali Resistant Glass fibre make 'Owens Corning or equivalent, Super plasticizers / Additives make by 'BASF or equivalent, Polymers make 'BASF' or equivalent and U.V resistant Synthetic inorganic pigments shall be used for pigmentation make BAYFERROX (Germany)' or e uivalent.The material casting shall take place in Synthetic Rubber / FRP Mould manufactured by Mould / Tool / Mould Grade Resin of Revex/ Reckli' or equivalent.
71	ELECTRICAL WORKRecessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
72	Group-A
73	Group-B
74	Group-C
75	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
76	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
77	Supplying, fixing of 6A switch socket on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand (Myrius-Next gen) /Panasonic (vision). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
78	Supplying, fixing of 6A Switch Socket on the same board in existing switch board with complete fitting by 02 nos of 6A switch & socket (modular type) ((anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make- Schneider (Zencelo)/ legrand (Myrius-Next Gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
79	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
80	Supplying, fixing of 2x16A switch socket on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ((anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make- Schneider(Zencelo)/ legrand( Myrius-Next gen)/ Panasonic (vision) (For equipment power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
81	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
82	SUB MAIN WIRING
83	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
84	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
85	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
86	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
87	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
88	4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/ Medical equipment) (4X6+2X4)
89	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
90	FAN & LIGHT FIXTURE
91	Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
92	Providing and fixing Wall Mounted Oscillating Fan of 400mm sweep, metal body with metal blades and guard, copper wound motor with thermal protection, complete with 3-speed wall regulator, suitable for 230V AC supply, including mounting hardware, connections, testing and commissioning as required. (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab)
93	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
94	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
95	Supplying an fixing of recess/surface mounted 2'x2' 36 W square shaped LED with lumen efficacy not less than 130lm/W, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj/ Polycab) . The luminaire must be Replacement Warranty will be 5 years.
96	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
97	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab). The luminaire should be Replacement Warranty will be 2 years .
98	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
99	S/F of Bakelite angle holder/ batten holder (make-Anchor/ Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
100	Supply and installtion of 9Watt LED lamp of similar to Phillips EyePro B22 LED Bulb on existing angle/ batten holder or equivalent.
101	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab) The luminaire should be Replacement Warranty will be 2 years
102	Providing and fixing IP65 LED Bulk Head Light of 10w with UV-resistant housing, opal diffuser, PF ≥ 0.90 driver, CRI ≥80, complete with necessary mounting accessories, wiring, testing and commissioning as required at site. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab). The luminaire should be Replacement Warranty will be 2 years
103	S/F of Street light- 45W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover Mounted on 32mm dia 800mm long GI pipe with bracket to install on roof or wall. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) (5Years Warranty)
104	Supply and fixing Call bell (Ding dong type)/ Buzzer on the existing switch box/cover. Make- Havells/ Anchor as required as per direction of Eng.-in-Charge. All the Components should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
105	DB AND MCB
106	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
107	TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
108	8 way (8 + 24), Double door
109	4 way (8 + 12), Double door
110	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
111	Supplying and fixing 40Amps 4P 415 volts, MCB (Make- Legrand-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ ABB SB 200/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years
112	Supplying and fixing 40Amps 4P 415 volts RCCB 30 mA (Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
113	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
114	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
115	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
116	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
117	(Earthing) INSTALLATION
118	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
119	Providing and fixing 25 mm X 5 mm dia G.I strip on wall/surface With required DMC insulator and nut bolt connection etc. as required.
120	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
121	DATA NETWORK
122	SITC of 4 pair Cat6 23 awg U/UTP LSZH Cable in the existing surface/ recessed steel/ PVC conduit as required: The 4 pair Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568-C.2 and ISO/IEC 11801 Class E , 4 twisted pairs separated by internal PE Cross Separator. Full separator. Half shall not be accepted. Rip Cord is must,Insertion Loss of 32.8 db/100m at 250 MHz ,Cable should support operating temperature from -20° to +70°C Cable support Conductor Resistance ≤ 9.38 Ω/100m Max., Cable support Delay Skew: < 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 Ω @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Verified 4 connector channel performance up to 700 MHz , RoHS Compliant. Make: Systimax/ Legran/ Panduit
123	SITC of Cat6 I/O with Dual Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax/ Legrand/ Panduit
124	SITC of Cat6 I/O with Single Face plate: The Outlet shall meet or exceed requirement as per ANSI/TIA 568C.2,ISO/IEC 11801, & EN50173. The information outlet NEXT, PSNEXT, FEXT, ELFEXT, PSELFEXT and return loss should be verified for CAT6 @ 250Mhz & CAT6A @ 500Mhz. The information outlet connector shall be of gold/nickel, thickness of gold > 0.8 μm. The connectors shall be compatible as per IEEE 802.3af standard for POE application. The PVC material of Face plate should complie ABS /UL94-V-O certified. Make: Systimax/ Legrand/ Panduit
125	SITC of Cat 6, 24-port loaded, 1U Modular Jack Panel Should accommodate Cat6 with Rear Cable Management and Front removable Tooless Information outlet. Should have easy clip management with labels and clear label covers, Made with of Dicast Aluminium Alloy Material and Non Corrosive with Cat6 toolless RJ45 x 24 ports with color code front panel with patch cord locking. Make: Systimax/ Legrand/ Panduit
126	SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit(1 mtr length)
127	SITC of Cat6 UTP 24 AWG Patch Cord Patch cord: 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100-Base-T and 1000-Base-T. Available In LSZH Jacket- Reduced Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 2 FORK 50μ’’ Gold Plated Contacts , 100% Factory Tested , Transparent Boot Cable Assemblies. Make: Systimax/ Legrand/ Panduit (2 mtr length)
128	SITC of 24 Port Layer 2 PoE+ Switch having 24 x 10/100/1000 Mbps Ethernet PoE+ ports with 4 x 1/10Gig SFP+ ports ,1 x RJ45 port console port ,Switching Capacity 128 Gbps , Throughput 96 Mpps ,MAC Address 16k , Switch should support IEEE 802.3af (15.4W) & IEEE 802.3at (30W). Total PoE power: 370W or above , Switch should support DHCP server/relay/client, DHCP snooping/option82 , Switch should support Console, Telnet, SSH v1/2, HTTP, HTTPS, SNMP v1/v2/v3, RMON , TFTP, FTP, SFTP, NTP, ZTP, SPAN, RSPAN,Switch should support support ICMPv6, DHCPv6, ACLv6 ,IPV6 Telnet ,Temperature 0°C -50°C ,Power Supply AC: 100-240V. Make: Digisol/ Cisco/ HP
129	SITC of 1G-LX/LH SFP transceiver module,SMF, 1310nm, 9/125 um Single mode Fiber Type up to 20 KM. Make: Cisco/ Digisol/ Netgear
130	SITC of 6 core Single mode OS2 Unitube Armoured Optical fiber cable through existing conduit: The Fiber should be OS2 Single Mode Optical Fiber Cable of Size 9/125µm. Outdoor Corrugated Steel tape Central loose tube. ( Standard Approved: ISO 11801 2nd edition/ EN 50173-1:2002 / IEC 60794-1/IEC 60793-2-50 class B1.3 / EN 60793-2-50: class B1.3 / ITU Recommendation G.652.D - the oder ITU designations A, B and C are also fulfilled / OS1/ISO/IEC 24702:2006, cat. OS2; also OS1 requirements are fulfilled/IEEE 802.3 - 2002 incl. 802.3ae ) Jacket. Make: Systimax/ Legrand/ Panduit
131	SITC of Rack mount Draw Type Loaded 6 port LIU available in Standard 19” ,Dimensions (mm) : 430 X 220 X 1U , Cold Rolled Steel as Raw Material , Consist of Top Cover and Bottom Panel , Easy to Assemble and Dissemble , Three Types of Input Holes Cable Entry Through Water Proof Cable Clamp , 12 Duplex SC or LC Adapter Interface , Splice 24 Fibers at Most with 1 Tray ,Adaptor, SM, Duplex SC, PC Type ,Pigtail, Support the TIA/EIA Telecommunication Wiring Standards. Compact Design , Telcordia GR-326-Core . Make: Systimax/ Legrand/ Panduit
132	SITC of OFC Patch Cor, SM (OS2), Duplex LC-SC, LC-LC PC Type, 3M, LSZH Fiber Optic Single Mode OS2 Patch Cords are offered in LSZH Jackets with Corning Fiber,Insertion Loss : <= 0.2 db, Max 0.3db/MTRJ: Max 0.5db Return Loss : PC>= 45db, UPC>=50db, APC>=60db. Make: Systimax/ Legrand/ Panduit
133	SITC of 9U/500D Wall Mount Rack with Accessories: The rack size should be 600W x 500D, Front frame integrated with top, bottom, front and two side panels for better rigidity and strength, Front Glass Door with Lock loaded, Compliance with standards shall be UL 2416., DIN 41494, IEC EN 60529, IEC EN 62262 , IEC EN 60068-2-11 , ISO 9001:2008 including Power Distribution Unit (06/16 Amp Indian-Standard - 06 Socket - Single Pole / Screw Mountable / 16 Amp MCB / Alternating Current - 16 Amp 3 Pin Plug with Power Cable 2.5 sq.mm 3 meter Lengt), 1 cooling Fan(230V AC - 90 CFM, dB 42), 2nos 1U Metal Cable manager with Plastic cable loops and H/W screw. Make: Valrack/ Rittal/ Legrand
134	Conduit
135	Supplying and fixing of following sizes of Med. Class PVC conduit along with the accessories in surface / recess & cutting the wall and making good the same in case of recessed conduit as required. Preferred Makes: AKG/ Precission/ Polycab
136	25 mm
137	20 mm
138	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
139	Group-A
140	Group-B
141	Group-C
142	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
143	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
144	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
145	Supplying, fixing of 2x16A switch socket on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ((anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make- Schneider(Zencelo)/ legrand( Myrius-Next gen)/ Panasonic (vision) (For equipment power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
146	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
147	SUB MAIN WIRING
148	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
149	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
150	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
151	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
152	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
153	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
154	FAN & LIGHT FIXTURE
155	Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
156	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
157	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
158	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
159	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
160	S/F of Bakelite angle holder/ batten holder (make-Anchor/ Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
161	Supply and installtion of 9Watt LED lamp of similar to Phillips EyePro B22 LED Bulb on existing angle/ batten holder or equivalent.
162	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab) The luminaire should be Replacement Warranty will be 2 years
163	DB AND MCB
164	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
165	TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
166	4 way (8 + 12), Double door
167	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
168	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
169	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
170	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
171	Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ ABB FB 200/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 1 year
172	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
173	(Earthing) INSTALLATION
174	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
175	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
176	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
177	Group-A
178	Group-B
179	Group-C
180	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
181	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
182	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
183	Supplying, fixing of 2x16A switch socket on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ((anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make- Schneider(Zencelo)/ legrand( Myrius-Next gen)/ Panasonic (vision) (For equipment power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
184	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
185	SUB MAIN WIRING
186	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
187	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
188	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
189	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
190	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
191	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
192	FAN & LIGHT FIXTURE
193	Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
194	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
195	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
196	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
197	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
198	S/F of Bakelite angle holder/ batten holder (make-Anchor/ Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
199	Supply and installtion of 9Watt LED lamp of similar to Phillips EyePro B22 LED Bulb on existing angle/ batten holder or equivalent.
200	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab) The luminaire should be Replacement Warranty will be 2 years
201	DB AND MCB
202	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
203	TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
204	4 way (8 + 12), Double door
205	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
206	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
207	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
208	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
209	Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ ABB FB 200/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 1 year
210	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
211	(Earthing) INSTALLATION
212	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
213	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
214	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
215	Group-A
216	Group-B
217	Group-C
218	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
219	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
220	Supplying, fixing of 6A Switch Socket on the same board in existing switch board with complete fitting by 02 nos of 6A switch & socket (modular type) ((anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make- Schneider (Zencelo)/ legrand (Myrius-Next Gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
221	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
222	Supplying, fixing of 2x16A switch socket on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ((anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make- Schneider(Zencelo)/ legrand( Myrius-Next gen)/ Panasonic (vision) (For equipment power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
223	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
224	Supply and fixing 4 WAY distribution board, of single pole/ 4 Pole MCB with sheet steel enclosure, on surface / recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphate and powder painted including earthing etc. as required. (But with out MCB/ RCCB/ Isolator)
225	SUB MAIN WIRING
226	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
227	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
228	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
229	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
230	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
231	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
232	FAN & LIGHT FIXTURE
233	Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
234	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
235	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
236	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
237	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
238	S/F of Bakelite angle holder/ batten holder (make-Anchor/ Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
239	Supply and installtion of 9Watt LED lamp of similar to Phillips EyePro B22 LED Bulb on existing angle/ batten holder or equivalent.
240	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab) The luminaire should be Replacement Warranty will be 2 years
241	S/F of Street light- 45W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover Mounted on 32mm dia 800mm long GI pipe with bracket to install on roof or wall. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) (5Years Warranty)
242	DB AND MCB
243	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- Legrand-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
244	TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
245	4 way (8 + 12), Double door
246	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
247	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
248	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
249	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
250	Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ ABB FB 200/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 1 year
251	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
252	(Earthing) INSTALLATION
253	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
254	Providing and fixing 25 mm X 5 mm dia G.I strip on wall/surface With required DMC insulator and nut bolt connection etc. as required.
255	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
256	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
257	Group-B
258	Group-C
259	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
260	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
261	Supplying, fixing of 6A Switch Socket on the same board in existing switch board with complete fitting by 02 nos of 6A switch & socket (modular type) ((anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make- Schneider (Zencelo)/ legrand (Myrius-Next Gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
262	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
263	Supplying, fixing of 2x16A switch socket on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ((anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make- Schneider(Zencelo)/ legrand( Myrius-Next gen)/ Panasonic (vision) (For equipment power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
264	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
265	SUB MAIN WIRING
266	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
267	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
268	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
269	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
270	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
271	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
272	FAN & LIGHT FIXTURE
273	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
274	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
275	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
276	DB AND MCB
277	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- Legrand-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
278	TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
279	4 way (8 + 12), Double door
280	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
281	Supplying and fixing 40Amps 4P 415 volts, MCB (Make- Legrand-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ ABB SB 200/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years
282	Supplying and fixing 40Amps 4P 415 volts RCCB 30 mA (Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
283	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
284	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
285	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
286	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
287	(Earthing) INSTALLATION
288	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
289	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
290	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
291	Group-B
292	Group-C
293	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
294	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
295	Supplying, fixing of 6A switch socket on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand (Myrius-Next gen) /Panasonic (vision). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
296	Supplying, fixing of 6A Switch Socket on the same board in Separate switch board with complete fitting by 02 nos of 6A switch & socket (modular type) ((anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make- Schneider (Zencelo)/ legrand (Myrius-Next Gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
297	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
298	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
299	SUB MAIN WIRING
300	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
301	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
302	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
303	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
304	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
305	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
306	FAN & LIGHT FIXTURE
307	Providing and fixing Wall Mounted Oscillating Fan of 400mm sweep, metal body with metal blades and guard, copper wound motor with thermal protection, complete with 3-speed wall regulator, suitable for 230V AC supply, including mounting hardware, connections, testing and commissioning as required. (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab)
308	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
309	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
310	Supplying an fixing of recess/surface mounted 2'x2' 36 W square shaped LED with lumen efficacy not less than 130lm/W, CRI not less than 80, CCT of 5700-6500 degree K, THD less than 10%,internal surge protection of 3 KV, complete with Non integrated isolated electronic driver (protects the output /secondary side from any disturbance on the input / primary side ensuring safe operation)and all other accessories suitable for operation on140- 270 V, 50 Hz ,L70 @50,000 burning hrs (5 years warranty) as required as per direction of Engg.-in-Charge (Make: Panasonic/ LT/ Havells / Philips/ Wipro/ Crompton/ Bajaj/ Polycab) . The luminaire must be Replacement Warranty will be 5 years.
311	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
312	DB AND MCB
313	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- Legrand-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
314	4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
315	8 way (8 + 24), Double door
316	4 way (8 + 12), Double door
317	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
318	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
319	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
320	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
321	Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ ABB FB 200/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 1 year
322	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
323	(Earthing) INSTALLATION
324	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
325	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
326	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
327	Group-A
328	Group-B
329	Group-C
330	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
331	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
332	Supplying, fixing of 6A switch socket on the separate board with complete fitting by 01 no of 6A switch & socket(modular type)( (anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider (Zencelo)/ legrand (Myrius-Next gen) /Panasonic (vision). (Maximum 02 nos point in one circuit).All the switches & sockets should be warrantied for a period of 2 years against manufacturing defects against which necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
333	Supplying, fixing of 6A Switch Socket on the same board in Separate switch board with complete fitting by 02 nos of 6A switch & socket (modular type) ((anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make- Schneider (Zencelo)/ legrand (Myrius-Next Gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
334	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
335	Supplying, fixing of 2x16A switch socket on the separate board with complete fitting by 02 no of 16A switch & socket(modular type) ((anti bacterial & flame retardant type)) with suitable size modular box & cover(anti bacterial & flame retardant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make- Schneider(Zencelo)/ legrand( Myrius-Next gen)/ Panasonic (vision) (For equipment power)All the switches & sockets should be warrantied for a replacement period of 2 years against defects with necessary test report & Warranty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
336	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
337	SUB MAIN WIRING
338	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
339	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
340	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
341	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
342	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
343	4 nos single core 10 sq. mm copper wire for phase and neutral and 02 nos of single core 6 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit .(LFDB TO FLOOR PANEL TO TPN BDB power) (4X10+2X6)
344	FAN & LIGHT FIXTURE
345	Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
346	Providing and fixing Wall Mounted Oscillating Fan of 400mm sweep, metal body with metal blades and guard, copper wound motor with thermal protection, complete with 3-speed wall regulator, suitable for 230V AC supply, including mounting hardware, connections, testing and commissioning as required. (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab)
347	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
348	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
349	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
350	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab). The luminaire should be Replacement Warranty will be 2 years .
351	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
352	S/F of Bakelite angle holder/ batten holder (make-Anchor/ Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
353	Supply and installtion of 9Watt LED lamp of similar to Phillips EyePro B22 LED Bulb on existing angle/ batten holder or equivalent.
354	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab) The luminaire should be Replacement Warranty will be 2 years
355	S/F of Street light- 45W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover Mounted on 32mm dia 800mm long GI pipe with bracket to install on roof or wall. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) (5Years Warranty)
356	DB AND MCB
357	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- Legrand-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
358	4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
359	4 way (8 + 12), Double door
360	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
361	Supplying and fixing 63Amps 4P 415 volts MCB (Make-Legrand- DX3 / Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. Warranty on MCB is 3 years.
362	Supplying and fixing 63Amps 4P 415 volts RCCB 30 mA (Make- Legrand- DX3/ Siemens- Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
363	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
364	Supplying and fixing 40 Amps rating,C series,10KA breaking capacity, 2P, 415 volts, RCCB 30mA . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ ABB FB 200/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 1 year
365	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
366	(Earthing) INSTALLATION
367	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
368	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
369	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
370	Group-A
371	Group-B
372	Group-C
373	S/F of 5 step type Modular electronic Fan Regulator ISI Marked with all connection complete in all respect as per direction of Engineer in charge (Make- Schneider (Zencelo)/ legrand (Myrius-Next gen)/ Panasonic (vision)
374	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
375	Supplying, fixing of 6A Switch Socket on the same board in Separate switch board with complete fitting by 02 nos of 6A switch & socket (modular type) ((anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. (Make- Schneider (Zencelo)/ legrand (Myrius-Next Gen)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
376	Supplying,fixing of 1x16A Plug on the separate board with complete fitting by 01 no of 16A switch & socket(modular type)((anti bactorial & flame retradant type)) with suitable size modular box & cover(anti bactorial & flame retradant type) including supplying of all required accessories of ISI marked as approved as per direction of engg-in-charge. Make-Schneider(Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision) (For equipement power) All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
377	Supplying and fixing AC point consisting of 20A socket outlet Modular type along with 25A starter with all connections and accessories as required as per direction of Engg.-in-Charge. (Make- Schneider/ Siemens/ Legrand) (For Split AC)
378	SUB MAIN WIRING
379	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
380	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (Light to Lights) (2X1.5+1X1.5)
381	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (LDB/PDB to LSB/ 6A Switch Board ) (2X2.5+1X1.5)
382	2 nos single core 4 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit. (PDB to 16A Power point/ AC Point) (2X4+1X1.5)
383	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit. (Inverter TO UDB) (2X6+1X2.5)
384	4 nos single core 6 sq. mm copper wire for phase and neutral and 02 nos of single core 4 sq. mm copper wire for earth continuity conductor in 32 mm dia non metallic heavy duty conduit.(LFDB TO LBDB/ Medical equipment) (4X6+2X4)
385	FAN & LIGHT FIXTURE
386	Supplying, installation, of exhaust fan of heavy duty 300 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & conntection as required as per direction of Engg.-in-Charge. Replacement Warranty will be 2 years.
387	Supplying, installation, of exhaust fan of heavy duty 380 mm sweep 1400 rpm with louvers (Make- Havells/ Crompton/ Usha/ Orient/ Bajaj/ Polycab) of exhaust fan in the existing wall, including fixing & connection .as required as per direction of Eng.-in-Charge. Replacement Warranty will be 2 years.
388	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
389	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
390	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
391	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab). The luminaire should be Replacement Warranty will be 2 years .
392	Supplying and fixing of Energy efficient surface /recess mounted square /round shape 9 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 9 watt and lumen output of 900 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
393	S/F of Bakelite angle holder/ batten holder (make-Anchor/ Havells of ISI marked conforming to IS-1258/1987 in place of ceiling rose as per direction of Engg.-in-Charge .
394	Supply and installtion of 9Watt LED lamp of similar to Phillips EyePro B22 LED Bulb on existing angle/ batten holder or equivalent.
395	SITC of Sleek LED 10 watt mirror light fitting with extruded polycarbonate housing,High optically efficient diffuser,above wash basin complete with all accessoriesetc. directly on wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab) The luminaire should be Replacement Warranty will be 2 years
396	Providing and fixing IP65 LED Bulk Head Light of 10w with UV-resistant housing, opal diffuser, PF ≥ 0.90 driver, CRI ≥80, complete with necessary mounting accessories, wiring, testing and commissioning as required at site. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab). The luminaire should be Replacement Warranty will be 2 years
397	DB AND MCB
398	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. (Make- Legrand-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
399	4 Way(8+12) Way TPN Mcb DD DB Horizontal Type as per IEC 61439-3 suitable for Flush mounting and Surface mounting with 100A Copper Bus Bar for each phase, with neutral Bus bar, Earth Bar & Cable ties for cable management, prefitted masking sheet, IP43-IK09 with metal door warranty on DB is 3 years
400	4 way (8 + 12), Double door
401	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
402	Supplying and fixing 40Amps 4P 415 volts, MCB (Make- Legrand-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ ABB SB 200/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 1 years
403	Supplying and fixing 40Amps 4P 415 volts RCCB 30 mA (Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The RCCB should be Replacement Warranty will be 3 years.
404	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of (Make- LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
405	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . (Make- LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9/ LK Exora) in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
406	(Earthing) INSTALLATION
407	Supplying,installation,testing & commissioning Of Earthing with copper earth plate 600 mm x 600mm x 6 mm thick ISI marked including accessories and providing masonary with cover plate having loccking arrangement and watering pipe etc (WITH charcoal and salt) as required as per direction of Engg.-in-Charge. The entire earthing system should be Replacement Warranty will be 2 years
408	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
409	Recessed wirring to light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor of ISI marked Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei with 20 mm dia HMS FRLS PVC conduit ISI marked Make- AKG/ BEC/ Precision/ Norpak/ Anchor/Kinjal 6A modular type (anti bactorial & flame retradant type) switch ISI marked Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN) /Panasonic (vision) and ceiling rose ISI marked of modular type G.I box with metallic cover plate (both side) (anti bactorial & flame retradant type) Make- Schneider (Zencelo)/ legrand (Myrius-NEXT GEN)/ Panasonic (vision) of suitable size, modular box with 1.5 sq. Mm FRLS PVC insulated single core multistandard copper conductor as earth wire including all accessories and connection as per direction of Engineer -in -Charge. All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials.
410	GROUP-A
411	GROUP-B
412	GROUP-C
413	Supplying ,fixing of 6A Plug on the same board in existing switch board with complete fitting by 01 no of 6A switch & socket (modular type)( (anti bactorial & flame retradant type)) & other required accessories of ISI marked as approved as per direction of Engg. -in -Charge. Make- Schneider (Zencelo)/ legrand( Myrius-NEXT GEN)/ Panasonic (vision). (Maximum 02 nos point in one circuit). All the switches & sockets should be warrantied for a replacement period of 2 years against defects with ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free aftersales service within warranty period for acceptance of materials.
414	SUB MAIN WIRING
415	Receass wiring for circuit/submain wiring with the following mentioned size PVC FRLS insulated, copper conductor, single core cable (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ KEI) in recessed HMS FRLS PVC conduit of mentioned size (Make- AKG/ BEC/ Precision/ Norpak/ Anchor/ Kinjal) as required as per direction of Engg.-in-Charge.
416	2 nos single core 1.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor. In 20 mm dia non metallic heavy duty conduit (LDB to LSB/LIGHT CKT)(2X1.5+1X1.5)
417	2 nos single core 2.5 sq. mm copper wire for phase and neutral and 01 no of single core 1.5 sq. mm copper wire for earth continuty conductor in 20 mm dia non metallic heavy duty conduit.(BDB to LSB/LIGHT CKT/5A PLUG/UPS POINT ) (2X2.5+1X1.5)
418	2 nos single core 6 sq. mm copper wire for phase and neutral and 01 no of single core 2.5 sq. mm copper wire for earth continuty conductor in 25 mm dia non metallic heavy duty conduit .(LFDB TO LBDB/UBDB) (2X6+1X2.5)
419	FAN & LIGHT FIXTURE
420	Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as requiredas required as per direction of Engg.-in-Charge . (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)of ISI mark as approved.
421	Supplying, installation, testing and commssioning of 1200 mm sweep white/milky colour BLDC ceiling fan with aluminium blades having wattage not more than 28W and air delivery ≥215m3/min (Make- Crompton Energion Groove/ Havells Efficiencia Neo/ Usha Technix/ Polycab Aria 32) including wiring the down rod of standard length (upto 30 cm) with 1.5 sq mm PVC insulated, copper conductor, single core cable etc. as required as per direction of Engg.-in-Charge,Replacement Warranty will be 4 years. (With fan Regulator)
422	SITC of energy efficient LED tube light fittings with decorative alluminium batten and LED tube light having power rating not more than 20 watt and lumen output not less than 2000 lumen complete with electronic driver and all other accessories with diffuser having 2 years warranty i/c connection etc as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab). The luminaire should be Replacement Warranty will be 2 years .
423	S/F of Street light- 45W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover Mounted on 32mm dia 800mm long GI pipe with bracket to install on roof or wall. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) (5Years Warranty)
424	DB AND MCB
425	Supplying and fixing of following mentioned way, three pole/single pole and neutral, sheet steel,double door MCB distribution board, 415 volts/240 volts shall be as per IEC 61439-3,integrated door earthing system offering additional safety to the user,High quality polyurethane Gasket,the box and cover shall be fabricated to withstand IK09,the DB should be properly pre-treated with 7 tank process and duly powder coated, phosphatized with powder coated finish, on surface/recess, complete with terminal blocks,with suitable size FR PVC insulated copper conducter up to terminal blocks, tinned copper busbar, neutral busbar, earth bar, din bar. Make-LEGRAND-Ekinox3 DB/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. The Distribution boards should be Replacement Warranty will be 3 years.
426	Supply and fixing of 12 way DD single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) Warranty on DB is 3 years
427	Supplying and fixing 32 amps rating, 240 volts, C series,10KA breaking capacity, Double poles MCB of Make-LEGRAND-DX3 / Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections as per direction of Engg.-in-Charge. The MCB should be Replacement Warranty will be 3 years.
428	Supplying and fixing 6-32 Amps rating, C series,10KA breaking capacity,SP, 230 volts, MCB . Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 in the existing MCB DB complete with connections, testing and commissioning etc. as required as per direction of Engg.-in-Charge. .. The MCB should be Replacement Warranty will be 3 years..
429	(Earthing) INSTALLATION
430	Supplying,installation,testing & commissioning of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
431	Providing and fixing 8 SWG (4 mm) dia copper wire on surface or in recess for loop earthing as
432	External Light Fittings
433	Supply, installation, testing and commissioning of LED Floodlight with system power consumption of the 300 wattage/ 30000Lumen ratings. Housing made of die cast aluminium for efficient thermal management, sturdiness & corrosion resistance. SS hardware, silicon gasket for iP66 protection, IK08 rated andhaving 5 year warranty of OEM etc complete as required for the work as per direction of Engineer- in -charge. (Make:-Bajaj/ Havells/ Phillips/ Wipro) (On Existing Highmast Light)
434	S/F of Street light- 90W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover(Make: Panasonic/ LT/ Havells /Philips/Wipro /Crompton/Bajaj) (5Years Warranty)
435	Supply of 6 mtr long hot dip Galvanized Octagonal pole manufactured from HT steel as per BS EN 10025/IS 2062 having minimum yield strength of 350 N/ SQMM having top dia of 70 MM A/F and bottom dia of 130 MM A/F of 3 mm thick or more , base plate as per IS 2062 complete with 4 nos. En 8 grade foundation bolts to withstand basic wind speed of 180 KM/HR wind speed (As per structural calculation of pole manufacturer )or more (Make of poles: Utkarsh/Bajaj/RR Ispat as per direction of Engg. in Charge.
436	Installation of pole by making the suitable size foundation by embeding the pole 1 mtr into the ground with necessary civil work and fixing the light on the pole equievalant make ISI marked as approved as per direction of Engg. in Charge.
437	S/F of Street light- 45W,120 lm/w efficacy , new generation energy saving & environmental friendly long life versatile pressure die-cast alluminium IP66 roadway luminaire with high power LED as light source with acrylic cover Mounted on 32mm dia 800mm long GI pipe with bracket to install on roof or wall. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj) (5Years Warranty)
438	Supplying and fixing of Energy efficient surface mounted square /round shape 18 W LED luminaire of dimension of consists of white powder coated , die-cast Alluminium housing with high quality frosted diffuser for glare-free uniform lighting distribution with wattage not more than 18 watt and lumen output of 1800 lumens, , CRI not less than 80,CCT of 6000 degree K,THD less than 10%, with electronic driver, internal surge protection of 3 KV , L70 B50: 50000 hrs and all other accessories suitable for operation on 220 V to 240 V supply as required as per direction of Engg.-in-Charge. (Make: Panasonic/ LT/ Havells/ Philips/ Wipro/ Crompton/ Bajaj/ Polycab).The luminaire should be Replacement Warranty will be 2 years
439	Panels, MDBs, DBs. MCBs
440	External Feeder Pillar for External Lighting
441	S/I/T & Commissioning of LT OUT DOOR FLOOR mounted cubical type IP66 based panel made out by 2mm CRCA steel sheet duly derusted & pented by simens gray powder cote paint is designed as G.A drawing. (FOR USE) with 32A TPN MCB 01 NO,1 no. Astronomical digital timer, AUTO MANUAL(with start and stop push button) SELECTOR 32 A 3P contactor, OLR,RYB,ON,OFF trip indication, Type-II SPD 40ka ,,04 nos 10A 4P MCB,C,10KA as outgoing Make-LEGRAND-DX3/ Siemens-Betaguard/ Schneider- Acti 9 as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period 3 years of acceptance of materials
442	PANEL AS ABOVE
443	(Earthing) INSTALLATION
444	SITC of materials and installation of GI earth plate 600mmx600mmx6mm thick ISI marked with G. I. nut bolts & washers including cost of burnt wood charcoal, salt, foreign soil, water pouring arrangements, brick masonary enclosure on top with removable RCC cover complete with labour for excavation of pit in all kinds of soil & rock as required and as per direction of Engineer-in-charge.The entire earthing system should be Replacement Warranty will be 2 years
445	Providing and fixing 25mm x 5 mm GI strip on surface or in recess for connections etc. as required as per direction of Engg.-in-Charge.
446	CABLING AND END TERMINATION MAIN AREA
447	Supplying of one number PVC insulated armoured and PVC sheathed XLPE property AL. conductor power cable of 1.1 KV grade of following size cables as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials. (Make- Finolex/ Anchor/ Polycab/ Havells/ RR Kable/ Kei)
448	4 core x 10 sq mm
449	4core x 16 sq mm
450	Supplying,laying of 3cx2.5 sq.mm copper flexible cable with insulated cover of reputed make,ISI marked with all other concerned materials as per direction of Engg.-in-Charge. Ncessary test report & Warrnaty certificate to be submitted to the department for genuinity of product & to avail free after sales service within warranty period for acceptance of materials
451	LAYING OF CABLE
452	Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size not exceeding 25 SQ. MM direct in ground in the trench in one horizental formation including excavation ,sand coushing protection covering and refilling the trench etc as required as per direction of Engg.-in -charge.
453	Laying of PVC Insulated PVC Seated /XLPE power cable of 1.1 kv grade size upto 25 SQ. MM direct in ground in the EXISTING PIPE etc as required as per direction of Engg.-in -charge.
454	TERMINATION OF CABLES
455	Supplying and making end termination with brass compression gland and aluminium/ Copper lugs for following mentioned size cable.as per direction of Engg.-in-Charge.
456	4 core x 10sq mm
457	4 core x 16sq mm
458	Outdoor Display BOQ
459	SITC of Outdoor IP66 Active LED Wall of Pixel Pitch : 6.94 mm or better Minimum Size: 9.84 ft x 6.56 ft +-2% ,with predefined resolution according to pixel pitch. Includes: LED Cabinets, LED Controller & Software Slim Cabinet i.e. 40 mm or less, Viewing Angle 160 / 140 or better, Cabinet -1000x500x85.1 MM, Refresh Rate 3840 Hz or more , Minimum Brightness 5500 nits or more, Max[1]Power Consumption-340 x 4 W, Lifetime 1,00,000 hours or more, Contrast TYP 12000:1 or more , with 2 years warranty , Surface Treatment- Less than /equal to 0.3 MM, Inbuilt Controller with HMDI, DVI input, OEM should have service centre in State and 10 Years presence in India. This include MS structure with ACP cladding as require, Media Player, . (Make:- Pansonic/ Delta)
460	Conduits
461	Providing, fixing and laying of fallowing dia HDPE pipe (medium class) in ground complete with fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
462	32 mm dia
463	Providing,fixing and laying of following dia G.I. pipe (medium class) in ground complete with G.I fitting incl. trenching(75 mm depth)and refilling as per direction of Engg.-in-Charge.
464	50 mm dia
465	P.H WORKInternal Sanitary & Plumbing System
466	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor CPVC pipes conforming to IS:15778 having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00. spacing. This includes Jointing of pipes & fittings with one step CPVC solvent cement and testing of Joints all complete as per specification and direction of the Engineer in charge.
467	In Ground Floor-
468	20mm dia C-PVC pipe
469	25mm dia C-PVC pipe
470	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor U-PVC pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.
471	32mm dia U-PVC ASTM pipe (sch-80)
472	40mm dia U-PVC ASTM pipe (sch-80)
473	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer's specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches , cost & conveyance of all materials to worksite, payment of taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.
474	110mm U-PVC SWR Pipe (Ashirvad/Supreme Make)
475	80mm U-PVC SWR Pipe (Ashirvad/Supreme Make)
476	110mm U-PVC D/Jn door(Ori Plast/Finolex/Supreme Make)
477	110mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
478	110mm U-PVC door bend(Ori Plast/Finolex/Supreme Make)
479	110mm U-PVC Plain bend(Ori Plast/Finolex/Supreme Make)
480	110mm U-PVC ‘P’ Trap(Ori Plast/Finolex/Supreme Make)
481	110mm U-PVC offset without ear(Ori Plast/Finolex/Supreme Make)
482	110mm U-PVC Cowl(Ori Plast/Finolex/Supreme Make)
483	110mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
484	75mm U-PVC Plain tee(Ori Plast/Finolex/Supreme Make)
485	75mm U-PVC Socket(Ori Plast/Finolex/Supreme Make)
486	110mm PVC SWR Clamp/clip(Ori Plast/Finolex/Supreme Make)
487	Supply,Providing, fixing, testing and commissioning in position UV stabilised 110 mm dia PVC Rain water pipe with Fittings (IS: 13592 Type - A). In case of ceiling hanging, the supply of Pipe Clamps (Chilly/MS angle) as per engineer in charge.110 mm diameter. .(Astral/Finolex Industries/ AKG/ Supreme/Ashirbad)
488	110 mm dia PVC (IS:13592, Type -A)
489	Supply, Providing and fixing 150 mm x 150 mm.dia CI Grating for Rain water pipes 110 mm dia.
490	150 mm x 150 mm.dia CI Grating (Parryware/ Hindware/Grohe/Jaguar)
491	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet(European type W.C. pan)with integral 'p' or 's' trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1) fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing , cost & conveyance of all materials to worksite, payment of
492	royality, taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge European water closet with 'p' trap plain. (Hindware/ Parryware/ Neycer make)
493	Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.
494	10 litres PVC L.L. Cistern with flush bend . (Parryware/ Hindware/Cera/Jaguar)
495	Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge. (Parryware/ Hindware/Cera/Jaguar)
496	Halfpedestal basin(560x450)Hindware No-11038-SW
497	32mm dia PVC waste pipe with brass coupling nut (Astral/Finolex/ Industries/ AKG/Supreme/Ashirbad)
498	15mm dia PVC inlet connection pipe 0.45m long (Astral/Finolex/Industries/ AKG/ Supreme/Ashirbad)
499	Supplying all materials, labour, T&P and fixing Cera Quatrino 24x18 inch Stainless Steel Single Bowl Sink, Matt Finish, Top Mount, 1.0 mm Thick, Grade: 304 including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia ss waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge. (610x457x250 mm) Stainless Steel Sink
500	Bed pan sink with PVC 10 ltr flushing tank .'p' trap size 584.2 x 477 x 634

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair & Renovation Work Of The Existing Hospital Building At Chc, Naktideul Under Ama Hospital (Phase-Ii) Scheme For The Year 2024-2025, Naktideul-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair & Renovation Work Of The Existing Hospital Building At Chc, Naktideul Under Ama Hospital (Phase-Ii) Scheme For The Year 2024-2025, Naktideul-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us