|
| 1 | De-Watering:-Suplying all materials, labours, T&P, 5.00 HP Diesel Pump set with POL, Pump Operator etc. and De-watering the clear water/muddy water etc. all complete as per the required specification and direction of Engineer in charge |
| 2 | De-Weeding:-Supplying all material, labour and T&P etc by removing rank floating Vegetation and uprooting the vegetation by digging upto a depth of 60cm, if required and removal of all types of weeds and other vegetation growth by forking repeatedly breaking clots,rough dressing,uprooting fresh growth after 10-15 days and fine dressing for planting new approved grass including cost of removing of all rubbish materials with all leads and lifts etc. all completed as per the required specifications and direction of Engineer-in-Charge. |
| 3 | De-Silting :- Supplying all materials labour T&P, Excavation of any available type of soil by mechanical means loading into and transportation by mechanical means and unloading the soil within the Pond Area on properly prepared and scientifically approved surface including spreading and levelling the earth in 22.5 cm layers to make ready for watering and compaction by mechanical means but excluding watering and compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road and borrow area etc. complete as per the required specification and direction of Engineer-incharge. (measurement of the fill to be taken on the finished compacted section under OMC condition.) |
| 4 | Supplying all materials labour T&P, Excavation of any available type of soil by mechanical means loading into and transportation by mechanical means and unloading the soil within the Pond Area on properly prepared and scientifically approved surface including spreading and levelling the earth in 22.5 cm layers to make ready for watering and compaction by mechanical means but excluding watering and compaction in dams and dykes for all heights including construction, maintenance, watering and lighting of haul road and borrow area etc. complete as per the required specification and direction of Engineer-incharge. (measurement of the fill to be taken on the finished compacted section under OMC condition.) |
| 5 | Supplying all materials labour T&P, Watering earthwork upto OMC condition and compaction by Mechanical means in layars not exceeding 22.5Cm to 95% dray density including hire and running charges of all the Machineries complete as per the direction of EIC (AoR-2006, Page no-12, item No.2) |
| 6 | Supplying all materials , Labour, T&P and Fine dressing of earthwork in odinary or hard soil in road / Embankment formation including cost of cutting of filling earth upto 0.15 depth of surface etc all complete as per the required specifications and direction of Engineer in Charge. |
| 7 | Supplying all labour and T&P etc. and providing surface dressing of the ground including removing vegetation and making up undulations not exceeding 15cm. in depth including disposal of rubbish, plantation of saplings - a) Bougainvillea Glabra @ 1 No. / sqft., ii) Elephant Ears Plant @ 1 Nos. / 3 sqft., iii) Canna Indica @ 1 Nos. / 2 sqft., iv) Wedelia Plantation @ 1 No. / 2 sqft. and v) Vetiver Grass - spread across the area, all complete as per direction of Engineer-in-Charge. |
| 8 | Supplying all labour and T&P etc. and providing and commissioning Floating Wetland, all complete as per specification & direction of Engineer-in-charge. |
| 9 | Earth work in excavation of ordinary soil for foundation & treaches to a depth of 300mm including fine dressing & levelling the bed depositing the excavated earth initial lead & 1.5 mtr initial lift and as per direction of ihe Engineer in charge. |
| 10 | Supplying all materials,labour,T&P for filling well watered and rammed sand over the prepared hard base of 30 mm thickness including all cost, conveyance, taxes of all materials, T&P etc complete as per the specification and direction of the Engineer In Charge. |
| 11 | Metal concrete (1 : 4:8) using 40mm size CBG metal with all cost of material, labour, conveyance, royalty, taxes T and P etc. complete. |
| 12 | Rigid smooth centering and shuttering to C.C. work including false work and dismantling them after casting complete in Ground Floor. |
| 13 | Supplying all materials, labour, T&P for Providing, base layer of WBM / WMM / Crushed Rock / Soil-Cement laying 200mm thickness, Spreading and Compacting coarse graded stone aggregate to wet mix macadam( WMM) spacification, Grade -IV and Spreading in uniform Layers by mechanical means on preparaed and compacted earth surface, Mixing by mix in place Method with rotovator at OMC and Compacting and rolling by vibratory roller to achive the desired compaction etc complete as per the direction of the Engineer In Charge. |
| 14 | Supplying all materials, labour and T&P for laying, fitting & fixing 60mm thick Cement Concrete inter locking paver blocks of M 30 grade of approved make, design, colour and size made by block making machine with proper compaction by mechanical means , cutting of paver blocks as per required size and pattern and laying the blocks in required pattern over the prepared hard base surface , finishing and sweeping extra sand in pathway including all cost, conveyance, taxes, royalities of all materials and T&P etc all complte confirming to IRC:SP-63:2018 and its ammendments if any etc all complete as per the specifications and directions of the Engineeer-in- Charge. |
| 15 | Supplying all materials, labour and T&P for laying, fitting & fixing 60mm thick Cement Concrete inter locking paver blocks of M 30 grade of approved make, design, colour and size made by block making machine with proper compaction by mechanical means , cutting of paver blocks as per required size and pattern and laying the blocks in required pattern over the prepared hard base surface , finishing and sweeping extra sand in pathway including all cost, conveyance, taxes, royalities of all materials and T&P etc all complte confirming to IRC:SP-63:2018 and its ammendments if any etc all complete as per the specifications and directions of the Engineeer-in- Charge. |
| 16 | Supplying all materials, labour and T&P for fitting and fixing of Random rubble Stone masonary in cement mortar (1:6) using H.G.Stones including all cost, conveyance ,royalty, taxes of all materials and all labour, T&P, etc. complete as per the directions and specifications of the Engineer-in-Charge |
| 17 | Supplying,fitting and fixing of Stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size [email protected] mtr.C/C and stainless square pipe bracing of size 32mmx32mmx2mm in 3 rows in stair case as per approved design and specification ,buffing,polishing,etc with cost conveyance,taxes of all materials,labours,T&P etc. required for the complete in all respect. |
| 18 | Provision for Sign board and Photography LS Please Enable Macros to View BoQ information |
