|
| 1 | Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type switch, cover plate, GI box including necessary connection etc. as required. |
| 2 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required. |
| 3 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required. |
| 4 | Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:- |
| 5 | 2 X 1.5 + 1 X 1.5 sq mm |
| 6 | 2 X 2.5 + 1 X 1.5 sq mm |
| 7 | 2 X 4 + 1 X 1.5 sq mm |
| 8 | 4 X 4 + 2 X 1.5 sq mm |
| 9 | 4 X 6 + 2 X 2.5 sq mm |
| 10 | 4 X 10 + 2 X 4 sq mm |
| 11 | 4 X 16 + 2 X 6 sq mm |
| 12 | Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in existing PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type switch, cover plate, GI box including necessary connection etc. as required. |
| 13 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 14 | 1 X 1.5 sq mm |
| 15 | 1 X 2.5 sq mm |
| 16 | 1 X 4 sq mm |
| 17 | 1 X 6 sq mm |
| 18 | 1 X 10 sq mm |
| 19 | 2 X 1.5 sq mm |
| 20 | 2 X 2.5 sq mm |
| 21 | 2 X 4 sq mm |
| 22 | 2 X 6 sq mm |
| 23 | 4 X 4 sq mm |
| 24 | 4 X 6 sq mm |
| 25 | 4 X 10 sq mm |
| 26 | 4 X 16 sq mm |
| 27 | 4 X 25 sq mm |
| 28 | 4 X 35 sq mm |
| 29 | Wiring for light / fan / exhaust fan / call bell point with 2 x1.5 sq. mm pvc insulated Copper conductor cable (FR) in pvc casing and capping complete with 6/10 amps modular type switch, cover plate, surface modular switch board including connection etc as required:- |
| 30 | Short Point :- |
| 31 | Medium Point :- |
| 32 | Long Point :- |
| 33 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2x1.5 sq. mm PVC insulated Copper conductor cable (FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 34 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2x2.5 sq. mm PVC insulated Copper conductor cable(FR) on surface modular switch board, earthing the 3rd pin etc. as required:- |
| 35 | Supplying and fixing of the following PVC casing capping with all accessories etc. as required. |
| 36 | 25mm x 12mm |
| 37 | 32mm x 12mm |
| 38 | Supplying and fixing of the following sizes PVC conduit (medium gauge) on surface with all accessories etc. as required. |
| 39 | 19/20 mm dia |
| 40 | 25 mm dia |
| 41 | 40 mm dia |
| 42 | Supplying and fixing of the following PVC conduit (medium gauge) with all accessories on slab/recessed on wall etc as required. |
| 43 | 19/20 mm dia |
| 44 | 25 mm dia |
| 45 | 32 mm dia |
| 46 | 40 mm dia |
| 47 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 48 | Ding dong call bell |
| 49 | Musical call bell |
| 50 | 3mm thick bakelite sheet |
| 51 | Electronic 4 step mini fan regulator |
| 52 | Electronic 5 step fan regulator |
| 53 | 32 amps DP kit kat switch:- |
| 54 | Supplying and fixing of the following modular accessories including necessary connection etc. as required. |
| 55 | Bell push SP (1M) :- |
| 56 | 4 step fan regulator (1M):- |
| 57 | 5 step fan regulator (2M):- |
| 58 | RJ11 telephone socket outlet (1M):- |
| 59 | RJ45 LAN socket outlet (1M):- |
| 60 | Blank plate (1M):- |
| 61 | 20/25 amps single phase motor starter switch (2M):- |
| 62 | Earthing with 40 mm dia G.I. Earth pipe (medium gauge) 4.5 m. long complete with masonry enclosure on top CI cover plate size 12\\"x 12\\" having locking arrangement including CC work, holes on earth pipe etc. as required. |
| 63 | Extra for using salt (5 kg) and charcoal (46kg) for pipe earth electrode as required. |
| 64 | Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick i/c accessories and providing masonry enclosure with CI cover plate Size 12\\"x 12\\" having locking arrangement, along with 20 mm dia (medium gauge) watering pipe including CC work etc as required:- |
| 65 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required. |
| 66 | Proving and fixing / drawing of 4.06 mm dia (8 SWG) G.I. wire on surface or in existing G.I/ PVC/ Polythene pipe for loop earthing as required. |
| 67 | Proving and fixing / Drawing 4.06 mm dia (8 SWG) Copper wire on surface or in existing G.I / PVC / Polythene pipe for loop earthing as required. |
| 68 | Supply and fixing of 25mm x 3mm Copper on walls/ floor of the building for horizontal/ vertical network including necessary spacers and porcelain insulators at regular intervals. |
| 69 | Supplying & fixing of 900 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) |
| 70 | Supplying of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades (Without regulator) (ISI marked, BEE 1 star/minimum service value 4.0m3/min/W) |
| 71 | Installation, testing and commissioning of ceiling fan including wiring the down rod of standard length (up to 30 cm) by 2 x 1.5 Sq.mm PVC insulated copper conductor cable(FR) etc as required. |
| 72 | Supplying & installation of 400 mm sweep AC wall mounting fan with metal blade including connection etc as required |
| 73 | Supplying & installation of 225/230 mm sweep metalic body exhaust fan including connection etc as required:- |
| 74 | Supplying & installation of 300 mm sweep metalic body exhaust fan including connection etc as required:- |
| 75 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 76 | Supplying & installation of metalic fan clamp box of standard size with 3mm thick bakelite/plastic cover as required:- |
| 77 | Supplying of 400 mm sweep AC padestal fan with metal blade etc as required:- |
| 78 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required: |
| 79 | Supplying and fixing of 40 Watt surface mounted LED battens-tubes luminaire, with all accessories including necessary connection etc. as reqd. |
| 80 | Supplying and fixing of following luminaries complete with necessary accessories and connection etc. as required (Commercial lighting fixtures with 50,000 burning hours):- |
| 81 | Decorative wall mounting fancy bracket light fixture suitable for GLS or retrofit CFL/LED (without lamp) : - |
| 82 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 83 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):- |
| 84 | Surface mounted round/Square shaped 12 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 85 | Surface mounted round/Square shaped 18/20 watt LED downlight with integral driver and high quality polycarbonate diffuser:- |
| 86 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 87 | 60 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 88 | 90 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 89 | 200 watt LED flood light fixture with integral driver and secondary lens (IP 66):- |
| 90 | 6 watt/10 watt LED Bulkhead light with high quality polycarbonate diffuser (IP 65):- |
| 91 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 92 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 93 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 94 | 12 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 95 | Supplying, Installaation, Testing & Commissioning of cubical type floor mounting indoor panel , IP42 as per powder coated, shade:RAL7032(Siemens grey) made of 2.00 mm CRCA sheet, dimension (H-2050 x W-1850 x D-900mm) with, fixing with horizontal & vertical 4-strip Aluminium Busbar of 1600 A, cable entry -bottom and comprising of following components- 1) Main LT Panel -1 A) Incoming Module from Transformer 1 (1) ACB EDO with Microprocessor release O/L S/C E/F Protection 1600A 66kA 4P - 2.00 Nos (2) TNC Switch 25A (Salzer) - 2.00 Nos (3) Under Voltage Release 240V AC -2.00 Nos (B) Metering Module 1) R/Y/B Phase Indication Lamp LED- 2.00 Set 2) On/Off/Trip Indication Lamp LED -2.00 Set 3) Digital Multifunction Meter MFM - 2.00 Nos 4) Current Transformer-15 Va, Cl-1 1600/5A (Rishabh)- 6.00 Nos 5) MCB 'C' Curve 6A SP 10kA -6.00 Nos 6) MCB 'C' Curve 6A DP 10kA - 2.00 Nos 7) Surge Protection Device 50kA Type 1+2- 2.00 Nos H) Outgoing Module 160A MCCB 1 MCCB with Thermal Magnetic Release O/L S/C Protection 160A 36kA 4P - 5.00 Nos 2) Spreader Terminal 160A 36kA 4P- 5.00 Set 3) Extended Rotary Handle 160A 36kA 4P - 5.00 Nos I) Outgoing Module 250A MCCB 1 MCCB with Thermal Magnetic Release O/L S/C Protection 250A 36kA 4P- 5.00 Nos 2) Spreader Terminal 250A 36kA 4P- 5.00 Set 3) Extended Rotary Handle 250A 36kA 4P - 5.00 Nos |
| 96 | Supplying, Installaation, Testing & Commissioning of cubical type floor mounting indoor panel , IP42 as per powder coated, shade:RAL7032(Siemens grey) made of 2.00 mm CRCA sheet, dimension (H-1500 x W-900 x D-1900mm) fixing with horizontal & vertical 4-strip Aluminium Busbar of 800 A, cable entry -bottom and comprising of following components- 1 Main LT Panel -2 A) Incoming Module from Transformer 1 (1) ACB EDO with Microprocessor release O/L S/C E/F Protection 800A 66kA 4P- 2.00 Nos (2) TNC Switch 25A (Salzer) - 2.00 Nos (3) Under Voltage Release 240V AC -2.00 Nos(B) Metering Module 1) R/Y/B Phase Indication Lamp LED (ESBEE)- 2.00 Set 2) On/Off/Trip Indication Lamp LED (Esbee)- 2.00 Set 3) Digital Multifunction Meter MFM - 2.00 Nos 4) Current Transformer-15 Va, Cl-1 1600/5A (Rishabh)- 6.00 Nos 5) MCB 'C' Curve 6A SP 10kA- 6.00 Nos 6) MCB 'C' Curve 6A DP 10kA - 2.00 Nos 7) Surge Protection Device 50kA Type 1+2 - 2.00 Nos (I) Outgoing Module 250A MCCB (1) MCCB with Thermal Magnetic Release O/L S/C Protection 250A 36kA 4P - 5.00 Nos 2) Spreader Terminal 250A 36kA 4P- 5.00 Set 3) Extended Rotary Handle 250A 36kA 4P - 5.00 Nos |
| 97 | Supplying, Installaation, Testing & Commissioning of cubical type floor mounting indoor panel , IP42 as per powder coated, shade:RAL7032(Siemens grey) made of 2.00 mm CRCA sheet, dimension (H-1150 x W-500 x D-1600mm) fixing with horizontal & vertical 4-strip Aluminium Busbar of 400 A, cable entry -bottom and comprising of following components- 1 Incoming Module -A) Incoming Module (1) MCCB with Thermal Magnetic Release O/L S/C Protection 400A 36kA 4P - 1.00 Nos (2) Spreader Terminal, 400A 36kA,4P - 1.00 set (3) Extended Rotary Handle -400A 36kA,4P - 1.00 Nos(B) Metering Module 1) R/Y/B Phase Indication Lamp LED (ESBEE) 1.00 Set 2) ATS Position Indicator (Esbee)- 1.00 Set 3)3 Ph. Digital Multifunction Meter MFM - 1.00 Nos 4) Current Transformer Class-15 VA, 400/5A (Procom/Rishabh)- 3.00 Nos 5) MCB 'C' Curve 6A SP 10kA -3.00 Nos (C) Outgoing Module (1) MCCB with Thermal Magnetic Release O/L S/C Protection 160A 36kA 4P- 2.00 Nos 2) Spreader Terminal 160A 36kA 4P- 2.00 Set 3) Extended Rotary Handle 160A 36kA 4P - 2.00 Nos 4) MCCB with Thermal Magnetic Release O/L, S/C Protection 250A 36kA 4P - 2.00 Nos 5) Spreader Terminal 250A 36kA 4P- 2.00 Set6) Extended rotary handle-250A 36kA 4P - 2.00 Set |
| 98 | Supplying, Installaation, Testing & Commissioning of cubical type floor mounting indoor panel , IP42 as per powder coated, shade:RAL7032(Siemens grey) made of 2.00 mm CRCA sheet, dimension (H-1150 x W-500 x D-1600mm) fixing with horizontal & vertical 4-strip Aluminium Busbar of 400 A, cable entry -bottom and comprising of following components- 1 Incoming Module -A) Incoming Module (1) MCCB with Thermal Magnetic Release O/L S/C Protection 250A 36kA 4P - 1.00 Nos (2) Spreader Terminal, 250A 36kA,4P - 1.00 set (3) Extended Rotary Handle -250A 36kA,4P - 1.00 Nos(B) Metering Module 1) R/Y/B Phase Indication Lamp LED (ESBEE) -1.00 Set 2) ATS Position Indicator (Esbee)- 1.00 Set 3)3 Ph. Digital Multifunction Meter MFM - 1.00 Nos 4) Current Transformer Class-15 VA, 250/5A (Procom/Rishabh)- 3.00 Nos 5) MCB 'C' Curve 6A SP 10kA -1.00 Nos (C) Outgoing Module (1) MCCB with Thermal Magnetic Release O/L S/C Protection 100A 25kA 4P- 4.00 Nos 2) Spreader Terminal 160A 25kA 4P- 4.00 Set 3) Extended Rotary Handle 100A 25kA 4P - 2.00 Nos |
| 99 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- |
| 100 | 63 amps 415 volts four strip Copper busbar chamber 4 ways of size (330mmx280mmx100mm):- |
| 101 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. |
| 102 | 6 way vertical TPN MCB DB suitable for FP MCCB incomer upto 125 amps (Double door):- |
| 103 | 8 way vertical TPN MCB DB suitable for FP MCCB incomer upto 125 amps (Double door):- |
| 104 | 6 way horizontal TPN MCB DB (Double door):- |
| 105 | 8 way horizontal TPN MCB DB (Double door):- |
| 106 | 12 way horizontal TPN MCB DB (Double door):- |
| 107 | 2 way SPN MCB DB (single door):- |
| 108 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required: |
| 109 | 6 to 32 amps SP MCB |
| 110 | 6 to 32 amps DP MCB:- |
| 111 | 6 to 32 amps TP MCB:- |
| 112 | 40/50/63 amps TP MCB:- |
| 113 | 40/50/63 amps FP MCB:- |
| 114 | Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):- |
| 115 | 125 amps FP MCCB, Breaking capacity 25KA (Thermal Magnetic) |
| 116 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required:- |
| 117 | 2 x (1 core 300 sq mm x 4) |
| 118 | 2 x (1 core 240 sq mm x 4) |
| 119 | Supplying and laying of the following sizes XLPE insulated PVC sheathed Copper conductors un-armoured cable with necessary connection etc as required:- |
| 120 | 4 core 95 sq mm |
| 121 | 4 core 70 sq mm |
| 122 | 4 core 50 sq mm |
| 123 | 4 core 35 sq mm |
| 124 | 3 core 1.5 Sq mm |
| 125 | 3 core 2.5 Sq mm |
| 126 | 4 core 6 Sq mm |
| 127 | 4 core 10 Sq mm |
| 128 | Supplying and fixing of Copper terminal ends (LUGS) - long barrel of following sizes. |
| 129 | 25 sq mm |
| 130 | 35 sq mm |
| 131 | 50 sq mm |
| 132 | 70 sq mm |
| 133 | 95 sq mm |
| 134 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 135 | Supplying & fixing of 40 mm dia G.I pipe (medium gauge) cross bar for fixing of ceiling fan/luminaries including painting & necessary accessories etc as required. |
| 136 | Supplying & fixing of 40mmx6mm MS clamp for installation of ceiling fan/luminaries on cross bar including necessary accessories etc as required:- |
| 137 | Supplying of ‘U’ clamp made with 40mm x 6 mm MS flat and fixing with necessary fasten nuts including painting etc as required. |
| 138 | Supplying & fixing of 12mm thick marine plywood conforming to IS:710 with necessary painting etc as required:- |
| 139 | Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :- |
| 140 | Drawing of armoured/un-armoured cable with proper saddling etc as required:- |
| 141 | Supplying & drawing of 2 pairs 0.5 sqmm unarmoured telephone cable in the existing PVC conduit/casing capping i/c necessary connection etc. as required:- |
| 142 | Supplying & drawing of UTP Cat-6 unmoured cable in existing pvc conduit/ casing capping i/c necessary connection etc. as required:- |
| 143 | Supplying, installation, testing, commissioning of 12 MTRS LIGHTING MAST FABRICATED PART AS PER DIMENSION :T0P DIA -150 mm, BOTTOM DIA - 360 mm, SECTION - 2 nos (SECTION LENGTH - 6250mm) THICKNESS - 3,3 mm. BASE PLATE - 520 mm x 25 mm, PCD - 440 mm, with following items: High Mast sections with base plate, Lantern carriage suitable to fix 6nos. of Luminaries (200 watt LED Flood Light) symmetricallly, 3 point suspension Head frame, M24x 850 mm x 6 nos with Template and Anchor Plate ACCESSORIES PART : 350 KG SGDD Winch (Gear Ratio - 50:1), 1.0 HP Power Tool,, 5Cx2.5 Sqmm(Single circuit) Trailing Cable, 6 mm SS wire rope (Grade-AISI 316)Make - Ashai / BW ltd., Compensating Disc, L-Stopper (3 Nos.), Manual operating handle, Mounting plates, Lightening Arrestor and earthling spikes (MS GI), and with AOL and stander feeder pillar erection of feeder pillar panel as reqd:- |
| 144 | Supplying, installation, testing, commissioning of 16 MTRS LIGHTING MAST FABRICATED PART AS PER DIMENSION :T0P DIA -150 mm, BOTTOM DIA - 410 mm, SECTION - 3 nos (SECTION LENGTH - 5800 mm) THICKNESS - 3,3,4 mm. BASE PLATE - 570 mm x 25 mm, PCD - 490 mm, with following items: High Mast sections with base plate, Lantern carriage suitable to fix 6 nos. of Luminaries (300 watt LED Flood Light) symmetricallly,3 point suspension Head frame, M30x 850 mm x 8 nos with Template and Anchor Plate ACCESSORIES PART : 500 KG SGDD Winch (Gear Ratio - 50:1), 1.5 HP Power Tool, 5CX2.5 Sq mm (Single circuit) Trailing Cable, 6 mm SS wire rope (Grade-AISI 316)Make - Ashai / BW ltd., Compensating Disc, L-Stopper (3 Nos.), Manual operating handle, Mounting plates, Lightening Arrestor and earthling spikes (MS GI) and with AOL and stander feeder pillar including erection of feeder pillar panel as reqd:- |
| 145 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m, disposed earth to be levelled and neatly dressed.-All kinds of soil |
| 146 | Supplying and filling in plinth, under floor, foundations etc. with sand (fine) from local quarry with all lifts including spreading in horizontal layers, watering, grading to required slope, ramming, consolidating and compacting each layer by using plate compactor or by any suitable method complete. |
| 147 | Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering --All work upto plinth level: |
| 148 | 1:4:8 ( 1 Cement: 4 fine sand : 8 graded stone aggregate 40 mm nominal size) |
| 149 | Centering shuttering including struttings, propping etc. and removal of form work for: |
| 150 | Foundations, footings, bases for columns etc. for mass concrete with steel formwork |
| 151 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement--All work upto plinth level: |
| 152 | 1:1:2 ( 1 Cement: 1 fine sand : 2 graded stone aggregate 20 mm nominal size) |
| 153 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 154 | Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 155 | Smooth finishing of the exposed surface of R.C.C. work with 6mm thick cement mortar 1:3 (1 Cement: 3 fine sand) |
| 156 | Providing structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as required. |
| 157 | Neat cement punning:- Please Enable Macros to View BoQ information |
