|
| 1 | CONSTRUCTION OF GOAT SHED ,DANA MIXER AND MEAT SHOP SHED PANDHARKAWADA |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel, and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation, and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.5 m.) By Mechanical Means 28.377+15.282+14.553 |
| 3 | Excavation for foundation in Hard Murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation, and necessary backfilling, ramming, watering including shoring and strutting etc. complete. (Lift up to 1.5 m.) By Mechanical Means 6.912+3.456+3.456 |
| 4 | (P.C.C. ) Providing and laying cast in-situ/Ready Mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required, and curing complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) 30.771+15.058+9.413 |
| 5 | (FOOTING CONCRETE ) Providing and laying cast in-situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage, and footings of R.C.C. columns and steel stanchions, etc. including bailing out water, steel centering, formwork, cover blocks, laying/pumping, compaction, and curing, roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade).7.104+4.288+4.288 |
| 6 | ( COLUMNS CONCRETE )Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C. columns as per detailed designs and drawings or as directed, including 3.386+1.512+1.512 |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed, including steel centering, formwork, cover blocks, laying/pumping, compaction, and roughening the surface if special finish is to be provided, and curing, etc. complete. (Excluding reinforcement and structural steel). with fully automatic microprocessor-based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade). 5.756+3.704+2.726 |
| 8 | (Brick Work) Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/in plinth external walls, including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces, and watering, etc. Complete.4.894+4.176+2.838 |
| 9 | Providing and laying Cast in situ/Ready Mix cement concrete in M-15 of trap/granite/quartzite/gneiss metal for Coping to plinth or parapet ,moulded or chanferd as per drawing etc completed.1.680+.896+.663 |
| 10 | Filling in plinth and floor with approved excavated materialas in 15 cm to 20 cm layer including watering and compoacting etc completed.10.80+3.456+3.456 |
| 11 | Filling in plinth and floor with Contractor materials /brought from outsides and approved by engineer incharge etc Completed.96.005+39.378+23.821 |
| 12 | Providing Soling using 80 mm Sizes Trap Metal in 15 cm layer including filling voids with crushed sand /grit ,ramming watering etc completed.0+12.844+6.621 |
| 13 | Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams, columns, canopies, staircase, newels, chajjas, lintels, pardis, copings, fins, arches, etc. as per detailed designs, drawings, and schedules, including cutting, bending, hooking the bars, binding with wires or tack welding, and supporting as required, complete. .812+.501+.447 |
| 14 | (Brick Work) Providing second class Burnt Brick masonry with conventional/I.S. type bricks in cement mortar 1:6 in Superstructures including bailing out water manually, striking joints on unexposed faces, raking out joints on exposed faces, and watering, etc. Complete.29.231 |
| 15 | ( EXTERNAL PLASTER ) Providing sand-faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15mm thick in cement mortar 1:4 using waterproofing compound at 1 Kilogram per cement bag, curing the same for not less than 2 days, and keeping the surface of the base coat rough to receive the sand-faced treatment 6 to 8mm thick in cement mortar 1:4, finishing the surface by taking out grains and curing for fourteen days, scaffolding, etc. Complete.118.176+31.707+23.79 |
| 16 | (Providing internal cement plaster 12 mm thick in single coat in cement mortar 1:4 without neeru finish etc completed.327.875 |
| 17 | Providing second Class Burnt Brick Masonary with conventional cement mortar 1:4 in half brick thick wall including steel longitudinal etc Completed. |
| 18 | Providing Structural Steel work in trusses,other similar trussed purlins and memebers with bracing , gusset plates etc.as per detailed designs and drawings or as directed including cutting , fabricating, hoisting, errecting fixing in position Making riveted / bolted / welded connection and one coat of anticorrosinge paint and over it 2 coats of oil paintin approved quality and shade etc.completed. 2.90+1+.550 |
| 19 | Providing and Fixing Colour Coated Zicalume AZ 150 Profile sheet for Roofing (min 150 gms /sqm )375.820+140.034+93.430 |
| 20 | Providing and Fixing Valley Gutter of 22 B.W.G Plain galvanised iron sheet 90 cm wide with teak wood planking 20 cm thick etc complted.24.510+9.144+7.320 |
| 21 | Providing and erecting chain link fencing 1.6M Height with G.I Chain link of sizes 50x50 mm 8 gauge thick etc completed |
| 22 | Providing and applying priming coat on concrete /masonary /asbesto cement plasterd surface including scaffolding if necessary preaparing surface claeaning oil etc complted 446.051+31.707+23.790 |
| 23 | Providing and applying THREE COAT OF WATER PROOF CEMENT PAINT OF APPROVED MANUFACTURED AND APPROVED COLOUR TO NEW PLASTERD SURFACES ETC COMPLETED ETC 446.051+31.707+23.790 |
| 24 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9mm with lock plate of 3.15mm thickness, reinforced with 35x35x5mm angle section fitted with sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65mm and 3.15mm respectively with holdfast arrangements, M.S. Bracket plate 300x300x3.15mm minimum size and shape with square bar, suspension shaft of minimum 32mm diameter, hood cover of M.S. sheet not less than 0.9mm thickness and of any size at top and safety devices including mechanical gear operation arrangement consisting of worm gear wheels and worms of high-grade cast iron or mild steel and one coat of red lead primer, etc. complete. (I.S. 6248-1979) (Without mechanical gear)18+18 |
| 25 | Providing and fixing Mild steel grill gate with angle iron frame 65 mmx 65mm x10mm with iron bar at 150 mm etc complted 7.470 |
| 26 | Providing and fixing Mild steel grill work for windows ventilators 15 kg/sqm as per drawing etc completed 4.32+7.2 |
| 27 | Providing Structural Steel work in single stanchions composed of R.S.J channel etc mild steel plates bolts anchor gusset plate fabrication erecting etc complted 1.306+1.751 |
| 28 | Providing and fixing country cut teak wood single leaf panelled door shutter without fanlight and 25 mm thich as drawing consisting etc complted. |
| 29 | providing and fixing frame with /without ventilator of sizes of specified with country non teak wood for door and windows etc complted |
| 30 | ELECTRICAL |
| 31 | Supplying and erecting mains with 3 x 2.5 sq.mm FRLSH copper PVC insulated wire laid in provided conduit / trunking / inside pole / Bus bars or any other places as per specification No: WG-MA/BW |
| 32 | Supplying and erecting LED Panel Light (600mm X 600mm) Max. 30 having CRCA powder coated housing, polystyrene diffuser having system lumens output of Min. 3600 Lumens, min. efficacy of 120 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs. at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with 3 years warranty. |
| 33 | Point wiring in for light/fan/bell in 20 mm metal conduit with 1.5 sq.mm (2+1E) FRLSH grade copper wire, flush type switch, earthing and required accessories as per specification No: WG-PW/SW |
| 34 | Supplying and erecting steel tubular swaged pole 139.7 x 114.3 x 88.9 mm dia with 4.5x3.65x3.25 mm thickness (4.5 + 1.75 + 1.75 m) length respectively and total 8.0 m long with pole cap, base plate in provided foundation. (weight 101 kg) as per specification no. OH- PL/STP |
| 35 | SProvidng earthing with galvanized iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification no. EA-EP |
| 36 | Supplying, erecting & marking DP-MCB 6 A to 32 A, B-series with rated short - circuit breaking capacity (Icn) 10kA in provided distribution board as per specification no. SW-SWR / MCB |
| 37 | Supplying and erecting marine (Waterproof) plywood 18/19 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners, supports, nut bolts etc. complete with compliance to IS 720:2010 |
| 38 | Wiring for plug on board with Switch socket surface/concealed type, copper wiring and earthing and with modular accessories as per specification No: WG PW/CW |
| 39 | Supplying and erecting regular/ standard model ceiling fan of 900 /1050 mm. sweep complete erected in position as per specification no. FG-FN/CF |
| 40 | Supplying, erecting and marking double pole isolator only switch version of miniature circuit breaker of 40A with required wiring connections and lugs etc. in provided distribution board. |
| 41 | ROYALTY CHARGES |
| 42 | Royalty for Sand |
| 43 | Royalty for murum and Other material |
| 44 | QUALITY CONTROL & LAB TESTING |
| 45 | M20 CONCRETE: Mix Design with all tests on basic materials |
| 46 | M20 CONCRETE: Concrete cube compressive strength |
| 47 | M10 CONCRETE: Concrete cube Test |
| 48 | BRICKS : Water Absorption (Set of 5 Bricks), Compressive strength (Set of 5 Bricks), Efflorescence (Set of 5 Bricks) |
| 49 | TMT STEEL : Yield Stress, Ultimate Tensile Stress, Elongation, Weight per running meter. |
| 50 | Sand :- i) Fineness Modulus, II) Silt content |
| 51 | Murum :- ii) Atterberg Limit |
| 52 | iii) Density of compacted layer |
| 53 | iv) Proctor Test |
| 54 | Cement Test i) Comprecive strengh ii) Intital and final setting time iii)Spcific Gravity iv) Spicific Gravity v) soundness vi) Finess |
| 55 | Metal Test i) AIV ii) Gradation iii) water Absorbation |
| 56 | Management Strategies and implementation plan (MSIP) to manage the Environmental Social Health and safety (ESHS) risks and ESHS Code of Conduct Please Enable Macros to View BoQ information |
