|
| 1 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 (1 cement : 4 fine sand) |
| 2 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 3 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. |
| 4 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.2 mm thick |
| 5 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 6 | Finishing walls with Acrylic smooth exterior paint of required shade:Old work (two or more coats applied @ 1.67 liters/10sqm on existing cement paint surface) |
| 7 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 8 | Taking out doors, windows and clerestory window shutters (steel or wood )including stacking within 50 meters lead :Of area of 3 sqm. and below |
| 9 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z. sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber I neoprene .. gasket felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I panelling, C.P. brass I stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in- Charge (glazing, panelling and dash fasteners to be paid for separately.) |
| 10 | For fixed portion:- Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 11 | For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately.):- Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 12 | Powder coated aluminum (minimum thickness of powder coated 50 microns) |
| 13 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) |
| 14 | With floating glass panes of 4.0 mm thickness (weight not less than 10.00 kg / sqm) |
| 15 | Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4 mm thick in doors, windows and clerestory window shutters.(Area of opening for glass panes excluding portion inside rebate shall be measured) |
| 16 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. |
| 17 | Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mmaperture on both sides |
| 18 | Providing and fixing Powder coated Aluminium Sheets in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge. (Cost of aluminum snap beading shall be paid in basic item.) |
| 19 | With Powder coated Aluminium Sheets of 3.5 mm thickness. |
| 20 | Providing and fixing of blinds for window incl all fixtures and fittings and necessary arrangements etc complete job(superior quality) Zebra roller blinds incl cost of providing and fixing of roller assembly as approved by engineer in charge |
| 21 | Filling the gap in between aluminum frame and adjacent RCC/Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.:-Upto 5mm depth and 5mm width |
| 22 | Providing and fixing ISI marked Powder coated aluminumbutt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :100x63x3.2 mm |
| 23 | Providing and fixing ISI marked Powder coated aluminum butt hinges ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :75x45x3.2 mm |
| 24 | Providing and fixing Powder coated aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete :250x10 mm |
| 25 | Providing and fixing Powder coated aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100x10 mm |
| 26 | Providing and fixing Powder coated aluminum sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :250x16 mm |
| 27 | Providing and fixing Powder coated aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.125 mm |
| 28 | Providing and fixing Powder coated aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.75 mm |
| 29 | Providing and fixing Powder coated aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 30 | Providing and fixing bright /matt finished Powder coated aluminuml handles of approved quality & make with necessary screws etc all complete.125 mm |
| 31 | Providing and fixing bright /matt finished Powder coated aluminum handles of approved quality & make with necessary screws etc all complete.75 mm |
| 32 | Providing and fixing aluminum hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 33 | Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminum doors of approved quality with necessary screws etc. complete as per direction of Engineer-in-charge. |
| 34 | Providing and fixing Powder coated /chromium plated brass butt hinges with necessary brass screws etc. complete:75x40x2.5 mm (ordinary type) |
| 35 | Providing and fixing Powder coated /chromium plated brass butt hinges with necessary brass screws etc. complete:100x70x4 mm (ordinary type) |
| 36 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, having brand logo embossed on the body/plate with double spring mechanism and door weight upto 125 kg for doors including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineerin- plate etc. complete as per the direction of Engineer-in-charge.With Stainless Steel cover plate minimum 1.25 mm thickness. |
| 37 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets:-20 mm dia ( heavy type) |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded |
| 39 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. |
| 40 | 2mm thick flat |
| 41 | Providing and fixing sheet covering over expansion joints with iron screws as per design Aluminum fluted strip 3.15 mm thick 200 mm wide |
| 42 | Providing and fixing in position Stainless steel Grade 304 plate-1.0 mm thick as per designfor expansion joints. |
| 43 | 300 mm wide |
| 44 | Providing and fixing in position pre-moulded joint filler in expansion joints. |
| 45 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared |
| 46 | Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared. |
| 47 | Excavation in dumped stones or malba including stacking of serviceable and unserviceable material separately and disposal of unserviceable material lead upto 50 m and lift upto 1.5 m, disposed material to be neatly dressed |
| 48 | Engaging carpentar with helper for minor wood work |
| 49 | Helper/Beldar |
| 50 | Engaging Backhole/JCB for general site clearance and removal of mulba etc |
| 51 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1:4:8 or leaner mix (i/c equivalent design mix) |
| 52 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.For thickness of tiles 10 mm to 25 mm |
| 53 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar |
| 54 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 55 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as:All kinds of soil : |
| 56 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) |
| 57 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size |
| 58 | Providing and laying 75mm thick compacted bed of dry brick aggregate 40mm thick nominal size including spreading, well rammed, consolidated and grouted with fine sand including finishing smooth etc. complete as per direction of Engineer-in-charge |
| 59 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 60 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size |
| 61 | Cutting chases in brick masonry walls for following diameter sand cast iron / centrifugally cast (spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing incement mortar 1:4 (1 cement :4 coarse sand):50 mm dia. |
| 62 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 63 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with:-1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 64 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. |
| 65 | Brickwork with common burnt clay F.P.S (non modualar) bricks of class designation 75 in foundation and plinth in 1cement : 6 coarse sand mortar. |
| 66 | Extra for masonry in superstucture above plinth level upto floor V level (by manual means) |
| 67 | Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns |
| 68 | Suspended floors, roofs, landing, balconies and access platform. |
| 69 | Edge of slabs and break in floors and walls Under 20 cms wide. |
| 70 | 12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 71 | 15 mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand) |
| 72 | 6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand) |
| 73 | 20mm Cement plaster 1 : 2 (1 cement : 2 Stone dust) |
| 74 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., completeIn colour such as White, Ivory, Grey, Fume Red Brown |
| 75 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622(thickness to be specified by the manufacturer), of approved make, in all colours, shadesexcept burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 76 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete:Size of tile 600x600 mm |
| 77 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer:-Using flats 30x6mm for diagonal braces and central cross piece. |
| 78 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge. |
| 79 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 80 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge.Orissa pattern W.C Pan of size 580x440 mm |
| 81 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid. |
| 82 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar taps. |
| 83 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required :White Vitreous China Wash basin size 630x450 mm with a pairof 15 mm C.P. brass pillar taps. |
| 84 | Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls whereverrequired:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 85 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 86 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265mm sizes respectively. |
| 87 | Providing and fixing 15 mm Urinal spreader size 95x69x100 mm with ½” BSP thread and shapes, weighing not less than 60 gms |
| 88 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge |
| 89 | Providing and fixing white vitreous china pedestal type (European type/wash down type) water closet pan. |
| 90 | Providing and fixing white vitreous china water closet squatting pan (Indian type:-) Orissa pattern W.C. pan of size 580x440 mm |
| 91 | Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete:10 liter capacity -White |
| 92 | Providing and fixing G.I. inlet connection for flush pipe connecting with W.C. pan. |
| 93 | Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40mm C.P. brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good thewalls wherever required :Size 600x450x200 mm |
| 94 | Providing and fixing waste coupling for wash basin and sink , of approved quality and colour.waste coupling 31 mm of 79mm length and 62mm breadth weighing not less than 45 gms. |
| 95 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe 32mm dia. |
| 96 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Semi rigid pipe |
| 97 | Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm |
| 98 | Providing and fixing soap dish holder having length of 138mm,breadth 102mm, height of 75mm with concealed fitting arrangements,weighing not less than 106gms. |
| 99 | Providing and fixing shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms |
| 100 | Providing and fixing towel ring trapezoidal shape 215 mm long, 200 mm wide with a minimum distance of 37 mm from wall face with concealed fittings arrangements of approved quality and colour, weighingnot less than 88 gms. |
| 101 | Providing and fixing liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with brackets of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 102 | Providing and fixing heavy class SS grating plane including setting in floor with cement motor to match with floor finish as per direction of Engineer-Incharge (Size 100 mm dia) (ISI Marked) |
| 103 | Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay (non modular) bricks |
| 104 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 105 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall |
| 106 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:15 mm dia. nominal bore |
| 107 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:20 mm dia. nominal bore |
| 108 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:32 mm dia. nominal bore |
| 109 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:40 mm dia. nominal bore |
| 110 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,including cutting and making good the walls etc.:Internal work-Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall:50 mm dia. nominal bore |
| 111 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing:-15mm nominal outer dia pipes. |
| 112 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing:-20mm nominal outer dia pipes. |
| 113 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall:-20 mm dia. nominal bore Medium |
| 114 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall:-32 mm dia. nominal bore Medium |
| 115 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall:-40 mm dia. nominal bore Medium |
| 116 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work-Exposed on wall:-50 mm dia. nominal bore Medium |
| 117 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS : 8931 15 mm nominal bore |
| 118 | Providing and fixing Florentine Single Lever Surgical Purpose elbow action basin Mixer with extended operation lever without popup waste system with 450 mm long braided hoses of make Jaquar Medi Series. |
| 119 | Providing and fixing Florentine Pillar Cock elbow action with extended lever handle of make Jaquar Medi Series. |
| 120 | Providing and fixing Florentine Bib Cock elbow action with extended lever handle and wall Flange of make Jaquar Medi Series. |
| 121 | Providing and fixing Florentine Single Lever Surgical Purpose elbow action Sink Mixer( Wall mounted) with extended operation lever , Connecting Legs & wall Flanges of make Jaquar Medi Series. |
| 122 | Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931 15 mm nominal bore |
| 123 | Providing and fixing uplasticized PVC connection pipe with brass unions:-45 cm length15 mm nominal bore |
| 124 | Providing and fixing ball valve (brass) of approved quality, High or lowpressure, with plastic floats complete :-20 mm dia. nominal bore |
| 125 | Providing and fixing brass stop cock of approved quality.20 mm nominal bore |
| 126 | Providing and fixing extension nipple for water tank pipe, fittings of approved quality and colour:20 mm nominal bore, weighing not less than 40gms |
| 127 | Dismantling rain water pipes with fittings and clamps including stacking the material within 50 meters lead :150 mm dia pipe. |
| 128 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes:150 mm diametre |
| 129 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.:-Bend 87.5°:150 mm bend |
| 130 | Dismantling rain water pipes with fittings and clamps including stacking the material within 50 meters lead :110 mm dia pipe. |
| 131 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes:110 mm diametre |
| 132 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.:-Bend 87.5°:110 mm bend |
| 133 | Dismantling rain water pipes with fittings and clamps including stacking the material within 50 meters lead :75 to 80 mm dia pipe. |
| 134 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. (i) Single socketed pipes:75 mm diametre |
| 135 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.:-Bend 87.5° 75 mm bend |
| 136 | Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement: 3 coarse sand) and acoat of neat cement, rounding the edges and making and finishing the outlet complete. |
| 137 | Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diametre and weighing not less than 440 grams. |
| 138 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven storey height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S.staircase system in the scaffoldings for working platform etc. and maintaining it in a serviceable condition for the required duration asapproved and removing it thereafter. The scaffolding system shall bestiffened with bracings, runners, connection with the building etc.wherever required for inspection of work at required locations withessential safety features for the workmen etc complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 139 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in- charge. |
| 140 | Providing and placing on terrace (at all floor levels) polyethylene waterstorage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 141 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as perdirection of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is notwritten with the stencil or old date is not removed deduction will be made@ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 142 | Engaging carpentar with helper for minor wood work |
| 143 | Carpenter 1st class |
| 144 | Helper/Beldar/sweper |
| 145 | Assistant Fitter/Plumber or 2nd class Fitter/Plumber |
| 146 | Carriage of construction materials |
| 147 | Sand for an average 5 Kms distance |
| 148 | Aggregates for an average 5 Kms distance |
| 149 | Bricks for an average 5 Kms distance Please Enable Macros to View BoQ information |
