|
| 1 | M & L for preparing old plastered surfaces of wall and and applying one coat of distemper oil emulsion, white or tinted complete all as directed. |
| 2 | Description all as per ser item No 1 above but on ceiling |
| 3 | Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped surfaces and preparation of surfaces for further treatment and applying two coats of distemper, oil emulsion white or tinted complete. |
| 4 | M & L for complete removal of existing treatment over wall and applying two coats of distemper oil emulsion over 2mm thick wall care putty complete all as directed |
| 5 | M & L for preparing old plastered surfaces of wall and applying one coat of white wash on walls |
| 6 | Description all as item no 5 above but on ceilings |
| 7 | M&L for preparation of old wooden surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint white or tinted complete all as directed. |
| 8 | Descriptin all as per Ser item above 7 but applying two coat of synthetic enamel paint white or tinted complete all as directed. |
| 9 | M&L for preparation of old painted steel surface of any description , over 10 cm width or girth not otherwise described and applying one coat of synthitic enamel paint white or tinted all as directed. |
| 10 | Taking down cement plaster on wall of any description incl racking out joints hacking for key and scrubbing down with water complete. |
| 11 | M&L 15mm thick rendering on fair faces of bk /concrete surfaces in cm (1:6), finished even and smooth (Without using extra cement ) complete |
| 12 | M&L three coat of white wash on newly prepared surfaces on wall , etc complete. |
| 13 | M&L for preparation of new plastered wall surface applying 2mm of \\"Birla White wall care putty\\"or\\" JK Wall Care Putty \\"to make the entire surface free from undulations all as specified. |
| 14 | M&L Preparing New putty wall surfaces, priming plastered and other surfaces with alkali resistant primer and applying two coats of oil bound distemper of any shade on walls surfaces |
| 15 | S&F 2nd class hardwood plain fillets, square, rectangular or rectangular in section, clean sawn secured with nails sectional area n exc 3 Sqcm complete. |
| 16 | Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete. |
| 17 | S& F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n. Exc 0.5 Sqm in each pane. |
| 18 | S & F in repairs corner Glass shelf assembly complete all as specified and directed. |
| 19 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick glass shelf 12cm wide with chromium plated bracket guar and railing 60cm long, fixed in repair. |
| 20 | S&F in repairs IVC hand shower (Health faucet) with 8mm dia, 01 (one) metre long PVC tube and wall hook with plastic body complete all as specified & directed. |
| 21 | S&F in repair bib tap 15mm chromium plated fancy type long shank with crutch butterfly handle, screw down screwed for iron pipe or for brass ferrule etc complete all as specified and directed . |
| 22 | S&F in repair stop valve 15mm chromium plated screw down, high pressure with crutch or butterfly handle, screwed fboth ends for or iron pipe or for unions and fixed complete all as specified and directed |
| 23 | Description all as per item ser no 22 above but two way angle cock |
| 24 | S&F in repairs15mm dia pillar tap cost copper alloy fancy type with capstan heads chromium plated screwed down high pressure with or without letered \\"Hot or Cold\\" high pressure with long screwed shanks & fly nuts screwed for iron pipe etc complete all as specified and directed |
| 25 | S&F in repair 15mm dia central hole basin mixer with U shaped round cated spout with 450mm long braided hoses (hot & cold)all as specified. |
| 26 | S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed compete.. |
| 27 | S&F in repairs 15 mm dia concealed type stop valve fancy type chromium plated etc complete all as specified and directed |
| 28 | S&F in repair vitreous china wash hand basin, white, flat back, size 550x400 mm incl chain and plug and porcelain stopper, brackets, waste pipe incl cutting for and pinning in ends of brackets or erecting stand including dismantling |
| 29 | S&F in repair PVC connection 450mm long with two PTMT nuts (Prayag) |
| 30 | S&F in repair CP towel rail, 20mm dia, D type,60cm long complete all as approved and directed by the EIC |
| 31 | S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 1000 litres hoisted and fixed in position all as specified in SSR Part I. |
| 32 | S&F in repair, plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device for pedestal pattern WC, black/ white colour. |
| 33 | S&F in repair 32mm bore low density polyethylene (LDPE) pipes of pressure rating 6kgf/sqcm Complete. |
| 34 | S&F in repair vitreous china squatting pan, Orrissa pattern size 580x440mm white with PVC 'P' or 'S' trap with integral foot rest of any pattern incl connection to trap & to flushing pipe, antisyphonage pipe etc making good to floor complete. |
| 35 | S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 500 litres hoisted and fixed in position all as specified in SSR Part I |
| 36 | M&L double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed.Make - Kelwyn / Amar |
| 37 | S&F cast brass fanlight pivot with plate size 25mmx65mm and suitable for shutter of 35mm thick complete. |
| 38 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staples |
| 39 | M&L 9mm thick Prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with alumunium frame work. |
| 40 | S&F 4 lever brass mortice lock vertical type size 65mm long complete. |
| 41 | S&F in repairs looking mirror 600x450mm selected quality 5mm thick glass mounted on 6mm ply wood & fixed with brass screw & cup washer |
| 42 | S&F in repair MS conduit curtain rod with PVC coating fancy type drafry rod 20mm dia of any colour as a spproved and fixed to rackets all as specified and directed. |
| 43 | S&F fancy type sofia brakcet for the curtain rod (suitable for 20mm dia curtain rod) of any approved colour and design all as specified and directed. |
| 44 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 15mm bore. |
| 45 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 46 | Taking up or down steel tubing and connections incl cleaning for refixing or removing to store yard of size 20mm bore. |
| 47 | Supplying and laying of 16mm outer dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. |
| 48 | S&F Door closer hydraulically regulated, designation No. 3, universal type,cast iron body suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed. |
| 49 | Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 75mm bore as in waste and rain water pipes complete all as specified & directed. |
| 50 | Supply and fix PVC Pipes single socketed in any length with rubber ring joints, fixed to walls, laid under floors etc. 110 mm bore as in waste and rain water pipes complete all as specified & directed. |
| 51 | Supply and fix PVC bends 75mm bore, any radius complete all as specified & directed.(ISI Marked) |
| 52 | Dismantling of wall/ceiling boards (fibre, pulp, insulation, etc) of any type including cover fillets. |
| 53 | M&L for providing aluminium snap Grid frame work for false ceiling with of size 605X605 mm ,using Main and cross tee of size 36.5mmX25mmX1.4mm,weighing 0.24 kg/RM and 23.5mmX26.4mmX1.4mm weighing 0.191Kg/RM respectively. the snap grid shall be supported at end all along the wall with aluminium anodised angle of size 40mmX25mmX2mm weighing 0.36Kg/RM. The snap grid shall be fixed to ceiling supporting hangers consisting of 2mm dia MS wire/GI wire, J bolts, nuts and washers as per manufacturer's complete all as specified. |
| 54 | M&L 4mm thick non asbestos fibre designer cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws. |
| 55 | M&L 5mm Prelam PVC sheet used instead of plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at site. |
| 56 | Taking down chowkhats or frame n exc 1.5 sqm with shutters (without taking off shutters from the frames). |
| 57 | Taking down chowkhats or frame exc 1.5 sqm but n exc 4.00 sqm with shutters (without taking off shutters from the frames). |
| 58 | Taking down Shutters of any description n exc 1 sqm. |
| 59 | Taking down Shutters of any description exc 1 sqm but n exc 2 sqm |
| 60 | Taking down Shutters of any description n exc 1 sqm and refixing in same opening after alteration. |
| 61 | Taking down Shutters of any description exc 1 sqm but n exc 2 sqm and refixing in same opening . |
| 62 | Dismantling timber fillets, rails, posts, rafters, purlins, etc under 40 sqcm in section in any position in framed work complete. |
| 63 | S&F Mild Steel Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates |
| 64 | Dimantling Plain or corrugated steel sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings. |
| 65 | S&F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall and ridge,fixed with self tapping srews complete. |
| 66 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified. |
| 67 | M&L Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth |
| 68 | S&F Pressed steel frames 105x60 mm for doors with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. |
| 69 | S&F Pressed steel frames 125x60 mm for doors with one or more rebatesincluding necessary fixing lugs, hinges, lock strike plate, etc., complete as specified. |
| 70 | M&L for plain cement concrete type B-0, 1 : 2 : 4 (using 12.5mm crushed stone aggregate) as in coping, filling chowkhat and holdfast complete all as specified. |
| 71 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 72 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 73 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face with particle board core supplying & fixing in frame at site as per specification & drawing |
| 74 | S&F 2nd class hardwood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats. |
| 75 | M&L 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work |
| 76 | S & F 100 mm Butt hinges medium weight cold rolled mild steel. |
| 77 | S & F 75 mm Butt hinges extrucded aluminium alloy with galvanised mild stel hinge pin, anodised and fixed, type C-21. |
| 78 | S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete. |
| 79 | S&F of 150 mm size aluminium handles cast type anodised. |
| 80 | S&F 250mm long Aluminium alloy, anodised, sliding door bolts with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extructed section or cast aluminium alloy and fixed. |
| 81 | S & F 3mm thick plain sheet glass ordinary quality & glazing with oil putty n.exc 0.50 Sqm in each pane including hacking out old broken glass. |
| 82 | S&F 4 mm thick figured glass pin headed type with oil putty n exc 0.5 sqm in each pane complete including hacking out old broken glass. |
| 83 | S & F 5.5mm thick plain sheet glass ordinary quality & glazing with oil putty n exc 0.50 Sqm in each pane. |
| 84 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 85 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 86 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire meshpanels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & sizeaccording to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixingframe to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drillingof holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weatherproof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremeshshall be paid separately)Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 87 | M&L Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; hold fast, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to fe.290.Gde-E-165 |
| 88 | M & L, 15mm thick rendering on fair faces of brick work/concrete surface in CM (1:6) surface finished fair & even complete. |
| 89 | M & L, 10mm thick rendering on fair faces of brick work/concrete surface in CM (1:4) surface finished fair & even complete. |
| 90 | M&L one coat White wash on old plastered or concrete surface including prepration of surface |
| 91 | M & L preparation of new plastered surface of wall and applying two coats of cement base paint. |
| 92 | M & L preparation of old surface of wall and applying one coat of cement base paint. |
| 93 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces |
| 94 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm including complete removal of existing treatment from wall surfaces |
| 95 | Material & Labour for preparation of old plastered surfaces and applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm. |
| 96 | Dismantaling floor, hearth or wall tiling, including cement mortar bedding (but not backing) removing serviceable tile to store & rubbish off the premises. |
| 97 | M&L, 15mm thick screed bed or bedding layer of mortar in CM (1:6) for lying floor finishes. |
| 98 | M&L Non - skid joint free coloured Ceramic tiles of any colour/shade 7 to 8 mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles . |
| 99 | M & L, 10mm thick backing coat on vertical surfaces of wall for receiving wall tiles or wall finishes in CM (1:4) . |
| 100 | M&L, glazed ceramic coloured tiles of size in vertical surfaces 350x 250x 7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in colour cement to match . |
| 101 | M&L in repairs 75mm dia of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement. |
| 102 | S & F in repair vitreous china wash hand basin,counter sunk white flat back of size 550 mm x 440 mm including brackets and making necessary arrangement for fixing. |
| 103 | S&F 32 mm bore dia of dishcharge pipe Waste coupling of PTMT(half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms) |
| 104 | S&F 450mm long, 15mm dia, PVC connection pipe, with brass unions on both ends. |
| 105 | S&F Plastic water closet seat, maticng colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device |
| 106 | S&F in repair CP Health fauset with 1 Meter PVC Tube and hook . |
| 107 | M&L complete removal of existing treatment on walls and applying two coats of oil bound distemper of approved colour and shade over one coat of putty complete. |
| 108 | Disconnecting 500 Ltrs existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scales and dirt algae, fungus etc from RCC/PVC water tanks and from mouth of pipes with bleaching powder etc after dewatering/draining water and removing vegetation around the tanks for the following tank capacities including writing with paint the date of cleaning on the tank. |
| 109 | Disconnecting 1000 Ltrs existing tanks, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position and Cleaning and removing all scales and dirt algae, fungus etc from RCC/PVC water tanks and from mouth of pipes with bleaching powder etc after dewatering/draining water and removing vegetation around the tanks for the following tank capacities including writing with paint the date of cleaning on the tank. |
| 110 | Dismantling water tanks Capacity in Exc 250 & n exc 500 litres and removing to store |
| 111 | Dismantling water tanks Capacity in Exc 500 & n exc 1000 litres and removing to store |
| 112 | S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 500 litres three layered hoisted and fixed in position all as specified in SSR Part I |
| 113 | S & F Rotational moulded polyethlene water storage tanks (cylindrical vertical with closed top) Capacity in 1000 litres three layered hoisted and fixed in position all as specified in SSR Part I. |
| 114 | S&F 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. Please Enable Macros to View BoQ information |
