|
| 1 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fitting fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc complete all as specified and as directed. |
| 2 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH Cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :- |
| 3 | (a) One light / fan controlled by one switch one way. |
| 4 | (b) One light point controlled by two 2 way switch. |
| 5 | (c) Socket outlet 05 Amp on same board. |
| 6 | (d) Socket outlet 05 Amp on independent board. |
| 7 | (e) One bell / buzzer point controlled by one bell push |
| 8 | All as per item No : 02 point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board. |
| 9 | M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLSH Cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC casing caping including all accessories etc, heavy duty ISI marked, with GI sunken /surface boxes 1.2 mm thick, 60 mm deep with earth dolly duly as per site requirment , covered with modular white cover plate with frame suitable for modular switches, or PVC surface mounted modular box, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH Cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified and directed for the following :- |
| 10 | (a) One ligh/Fant point controlled by one, one way switch |
| 11 | (b) One light point controlled by two 2 way switch. |
| 12 | (c) One three pin 5 Amps socket outlet point controlled by one, one way switch on same board |
| 13 | (d) One 3 pin 5 Amps socket outlet point controlled by one No, way switch on independent board. |
| 14 | (e) One bell / buzzer point controlled by one bell push |
| 15 | All as per item No 4 but point wiring with 2.5 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core cable for one three pin 15 Amp socket outlet point on independent board. |
| 16 | Taking down old / perished sub main wiring of any size aluminium conductor cable along with TW batten / PVC conduit and making good the disturbed surface of wall complete all as specified and as directed. |
| 17 | M & L in repair for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH Cable with multistranded copper conductor of size 4.0 Sq mm nominal area and drawn through PVC non metallic rigid PVC casing caping and its accessories including one run of PVC insulated 4.0 Sq mm (nominal area) multistranded copper conductor FRLSH Cable as earth wire and connected from DB to DB/ main board complete all as specified and as directed.(Note- Two runs of 4.0 Sqmm main cable, one run of 4.0 Sqmm earth conductor and one run of PVC conduit will be measured as one unit) |
| 18 | All as per item No 7 but Submain wiring with 2 runs of 6 Sqmm size main cable and one run of 6 Sqmm size earth continuity conductor. |
| 19 | S&F modular switch 01 way 6 Amp , 01 module ISI marked complete all as specified and as directed. |
| 20 | S&F modular switch 02 way 6 Amp , 01 module ISI marked complete all as specified and as directed. |
| 21 | S&F modular switch 01 way 16 Amp , 01 module ISI marked complete all as specified and as directed. |
| 22 | M&L for Modular bell push 6 amp 230 volt 50 hz AC supply one way, complete all as specified and as directed. |
| 23 | S&F modular socket 6 Amp , 2 module ISI marked complete all as specified and as directed. |
| 24 | S&F modular socket 6 / 16 Amp , 02 in 01 , 02 module ISI marked complete all as specified and as directed. |
| 25 | S&F for modular step fan regulator 120 watt 2 module suitable for 230 Volt 50 Hz supply complete all as specified and as directed. |
| 26 | Supply & fix CALL Bell ISI marked complete all as specified and as directed. |
| 27 | S&F ceiling rose surface Bakelite 3 terminals 230V 50 Hz ISI marked complete all as specified and as directed. |
| 28 | S& F modular white cover plate with frame 3 module complete all as specified and as directed. |
| 29 | S& F modular white cover plate with frame 6 module complete all as specified and as directed. |
| 30 | S& F modular white cover plate with frame 8 module complete all as specified and as directed. |
| 31 | S&F for Lamp holder, PVC/ Polycarbonate type with back plate suitable for angle/batten fitting complete all as specified and as directed. |
| 32 | S & F in repair for LED 10 watts batten aluminium extruded with decorative end caps complete all as specified and as directed. Make- Bajaj Cat Part No BCLSB 10 NW, Halonix Cat No HLB-03-10-CW-AL or its equivallent model in JAQUAR,HALONIX, HAVELLS, PHILIPS. |
| 33 | S & F for for wall/ceiling mounted LED batten tube 18 watts white/ warm white light fitting, 230 volts with out put of 2000 lumens with extruded aluminium housing with decorative end caps and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- JAQUAR Cat part No LGLZ01X020XN or Halonix Cat part No HLB-03-18-CW-AL ALI/ PHILIPS |
| 34 | S & F in repair for wall mounted 18 watts indoor Inverter batten with opal diffuser, IP 20, with 4 hrs back up with out put of 1800 lumens , box type (decorative) light fitting, 230 volts with extruded aluminium heat sink provided for efficient heat dissipation and intregrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED tube 4' x 18 watts complete all as specified and as directed. Make :- Halonix Cat part No. LED INVERTER BATTEN HLB-08-18-CW-INV or equivalent Philips |
| 35 | Supply and fix for energy saving new generation 10 watts LED bulk head fitting , 230 volts with connector block etc complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor from ceiling rose to fitting complete all as specified and as directed. Make :- PHILIPS/JAQUAR Cat No.CWLL01V109XX, Halonix Cat part No. HLBH-02-10CW, 10W/Bajaj/Shakti/ havells |
| 36 | S & F in repair LED post top lantern fitting New generation, energy saving, environmental friendly, long life aesthetically designed Die cast aluminium housing of capacity 25 Watt, with high power LED as light source complete with all accessories fixed on GI pipe 40mm dia complete all as specified and directed. Make : JAQUAR Cat No MONACO 340.33.NGG Bajaj Cat part No BGCTN 25W LED WW, Halonix Cat No HLPT-S04-25-CW or Shakti Cat No SZPGPMX025 |
| 37 | Supply & fix in replacement for Decorative wall mounted luminaire with opal glass with E27 lamp holder complete all as specified and as directed. Make- Jaquar Cat part No - JNL-CHR-WLSL-55004E27 , havells FLORETTE 1LS E27 SS, HALONIX HLWB-01-E27 |
| 38 | Supply and fix in repair Inverter LED Lamp warm white/ amber 10 Watt highly efficient of make Halonix LED INVERTER LIGHT 10W B22 CW IP, Havells /Bajaj/Philips all as specified and as directed. |
| 39 | S & F in repair for recess mounted 2' x 2' luminaire to enhance the delight of occupants with comfortable experience through its classic design & glare free sift illumination square LED panel 43 watts, white/Warm White powder coated CRCA housing with full window acrylic diffuser giving a complete full glow look, operating voltage 140 volts - 270 volts, AC, 50 Hz complete all as specified and as directed. Make- JAQUAR Ultima Ultra Cat Part No LULTU1S036XC or its equivalent in Havells/ halonix Cat No HLFPR22-07-36-CWL-R |
| 40 | S & F in Repair for LED down light recess mounted luminare, 1'x1'of 18/20 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Halonix Cat No HLFPR11-02-18-CW, jaquar nero plus LNRP01R012XN or Havells, Phillips complete all as directed by Engineer- in-charge |
| 41 | S & F in Repair for LED down light Surface mounted luminare, 1'x1' of 18 watts with efficiency of 100 lumens per watt, sleek design aluminium housing polycarbonate diffuser white finish operating voltage 150 V-270 V AC, 50 Hz all as per Make- Halonix Cat No HLFPS11-02-18-CW, Philips Cat Part No DN172B LED9S-6500 PSU, jaquar nero plus LNRP01R012XN or Havells complete all as directed by Engineer- in-charge |
| 42 | S & F in Repair for LED downlight recess mounted luminare round type 12 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz including taking down old unserviceable fitting complete all as directed Make :- Halonix Cat HLDLR-R06-12CW, Jaquar, philips/ Havells in equivalent |
| 43 | S & F in Repair for LED downlight surface mounted luminare round type 12 watts with inbult driver and polycarbonate opal diffuser white finish operating voltage 230V AC, 50 Hz including taking down old unserviceable fitting complete all as directed Make :- Halonix Cat HLDLS-R06-12CW Jaquar , philips/ Havells in equivalent |
| 44 | S/F LED street light fitting 30 Watt 230V energy efficient & environment friendly type. The fitting should have powder coated, pressure die cast Aluminium housing and heat resistant toughened glass with frame having better optics for uniform distribution complete all as per Make Halonix Cat HLSLD-09-30-CWL-R, JAQUAR or equivalent of make Bajaj, Philips, Havells as approved. |
| 45 | Supply and fix in repair for Ceiling Fan of sweep size 1200 mm BEE. Five star rated with brushless direct current motor (BLDC) →, ISI marked and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed. Make:- Bajaj , USHA , Havells, Orient |
| 46 | Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 150 mm sweep with louvers all as per Cat No. Maxma DX 6\\" of Make Bajaj or equivalent of Make Automberg/ Havells/Usha/ Halonix with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed. |
| 47 | Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 200 mm sweep with louvers all as per Cat No. Maxma DX 8\\" of Make Bajaj or equivalent of Automberg/ Havells/Usha/ Halonix with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed. |
| 48 | Supply and fix in repair for plastic body exhaust fan, AC single phase, 240 volts of size 250 mm sweep with louvers all as per Cat No. Maxma DX 10\\" of Make Bajaj or equivalent of Automberg/ Havells/Usha/ Halonix with necessary connection and replacement of flexible copper cable from ceiling rose complete all as specified and as directed. |
| 49 | S&F in repair for MCB DB TPN 4 way double door sheet metal enclosure for 63 Amps MCB TPN incomer comprising of OEM/manufacturer specified bus bar, 415 Volts, 50 Hz bus bar and neutral link complete including inserting in wall all as specified. MAKE:- Havells Cat No DHDMTHPDOW04, LEGRAND / L&T / SCHNEIDER / C&S |
| 50 | S&F in repair for MCCB DB VTPN 4 way double door sheet metal enclosure for 100 Amps 4 pole MCCB (ICS = ICU= 100%) Incomer comprising OEM/manufacturer specified bus bar, 415 Volts, 50 Hz , 160 Amps bus bar and neutral link complete including inserting in wall all as specified. MAKE:- Havells Cat No DHDLVDOBATFO04, LEGRAND/SCHNEIDER/ L&T |
| 51 | S&F in repair for MCCB DB VTPN 8 way double door sheet metal enclosure for 100 Amps 4 pole MCCB Incomer comprising OEM/manufacturer specified bus bar, 415 Volts, 50 Hz bus bar and neutral link complete including inserting in wall all as specified. MAKE:- Havells Cat No DHDLVDOBATFO08, LEGRAND/SCHNEIDER/ L&T |
| 52 | S & F for MCB triple pole and neutral 415 Volts, 63 Amps, 10 KA. (ICS=ICU=100%) MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells-DHMZCTNF063 |
| 53 | S&F in repair for MCB DB SPN 06 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells DHDESHCDOW06 |
| 54 | S&F in repair for MCB DB SPN 08 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells DHDESHCDOW08 |
| 55 | S&F in repair for MCB DB SPN 12 way double door sheet metal enclosure with OEM specified common bus bar and neutral link compete including inserting in wall all as specified. MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells DHDESHCDOW12 |
| 56 | S & F for 'C' curve MCB single pole & neutral 240Volts 32/40 Amps.MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells DHMZCSNF006-032 |
| 57 | S&F 'C' curve MCB SP 240 volt 6 to 30 AmpMAKE:- LEGRAND/SCHNEIDER/L&T/ Havells DHMZCSPF006-032 |
| 58 | Supply and fix for sheet metal enclosures single pole and neutral with a three pin earth plug and socket complete with one MCB SP 20/ 32Amps complete all as specified and as directed.MAKE:- LEGRAND/SCHNEIDER/L&T/ Havells - DSSPLX0036 |
| 59 | Material and labour for attending emergent complaints i.e no light, earth leakage, short circuit, neutral break mains/ sub mains/ internal circuits of existing system of main building/ block, making continious electric supply including carrying out minor repairs etc as required to make the system in order/ functional including replacing fuse wire, copper cable, copper thimbles, glands, earthing wire complete all as specified and as directed. Note :- Rate of fuse wire, copper thimbles, glands, earthing wire are deemed to be considered in this item. |
| 60 | Taking down existing cable electrical /fiber/telephone of any type and any description/ size from wall/ roof/floor and refixing the same within PVC conduit pipe or casing capping and making good to the disturbed surfaces to match the existing complete all as specified and directed at site.Note : - Rates of PVC conduit pipe/ casing capping will be measured and paid separately under relavant items. |
| 61 | S & F for casing and capping size 25 mm for existing wires including removal of old unserviceable one complete all as specified and as directed |
| 62 | S & F for casing and capping size 40 mm for existing wires including removal of old unserviceable one complete all as specified and as directed |
| 63 | Supply and replace for rigit PVC conduit 20mm dia. heavy duty of white/ ivory colour with all accessories and making good the disturbed seurfaces for laying of telephone cable complete including removal old existing unserviceable all as directed |
| 64 | Supply and replace for single core cable PVC insulated and unsheathed multistranded copper conductor of following size from point wiring/Submain wiring including removal old existing unserviceable one complete all as specified and directed. |
| 65 | (a) 1.5 Sq mm |
| 66 | (b) 2.5 Sq mm |
| 67 | M&L for Earthing complete with galvanised mild steel earth plate electrode of size 600 x 600 x 6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level, connected to galvanised iron or earth lead wire 4.0 mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised iron including PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. |
| 68 | Note : 1. Performance security:- Refer Condition 22 of Special Conditions. 2. Quoted Contract Sum shall be arrived at after deducting the amount of Credit Schedule (refer Schedule of Credit in pdf form for quantity, rate and amount etc.) for old unserviceable materials retrieved from site. Please Enable Macros to View BoQ information |