|
| 1 | Schedule 'A' |
| 2 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed. |
| 3 | S&F Pre- painted galvalume aluminum zinc coating GI based semi corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screws as specified. |
| 4 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, hips, valley gutters, drip, straight flashing etc fixed with self tapping screws as specified. |
| 5 | S&F 0.50mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing length and girth as fixed complete all as specified and directed. |
| 6 | S&F 0.56mm thick plain, aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing length and girth as fixed complete all as specified and directed. |
| 7 | Demolition Cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thickness below or above ground level complete all as specified and as directed. |
| 8 | Demolition of cement concrete (unreinforced) PCC in any description and in any portion not otherwise specified complete all as specified and directed. |
| 9 | M&L for 75mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub base completed all as specified and directed. (Using Dimapur Sand) |
| 10 | M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified. |
| 11 | M & L for 25 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified. |
| 12 | M&L for 75mm thick cement concrete type C2 1:3:6 using 40 mm graded stone aggregate as in plinth protection including finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed. (Using dimapur sand) |
| 13 | Dismantling floor, hearth , chequred tiles, interlocking tiles tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 14 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 15 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 16 | S&F Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile including 10mm thick cement mortar backing in CM (1:4) as backing coat to receive tiles complete all as specified and directed. |
| 17 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed 20mm thick in CM 1:3 complete all as specified and directed. |
| 18 | M&L for preparation of newly painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coats of synthetic enamel paint over a coat of red oxide, zinc chrome complete all as specified and directed. |
| 19 | M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 20 | M&L for preparation of new steel surfaces of any description, not otherwise described, not exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 21 | M&L for preparation of old painted surfaces of steel of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 22 | M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer on wooden surfaces complete all as specified and directed. |
| 23 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and pre-cast concrete articles and removing unserviceable materials from site of work complete all as specified and directed. |
| 24 | M&L for brick work with subclass ‘B’ bricks, (locally available best quality) old size bricks straight or curved on plan exc 6 m means radius, built in cement mortar (1:6) complete all as specified and directed. |
| 25 | M & L for brick work with sub class ‘B’ brick straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed. |
| 26 | Taking down cement plaster on brick or stone walls etc, including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 27 | M&L for rendering 15mm thick in CM 1:4 on on fair surfaces of brick in two separate coats (10mm thick backing coat and 5mm thick top coat) using water proofing compound @2% by weight of cement as per manufacture instruction and finishing works/concrete surfaces finished even and smooth complete all as specified and directed.Note : (i) WPC will be measured and paid separately (ii) Rates deemed to be inclusive of scaffolding upto height 12 Mtr at reqd places. No additional payment will be made on this account |
| 28 | M&L for rendering 10 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and directed. |
| 29 | Supply only intergral water proofing compound complete all as specified and directed. |
| 30 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed. |
| 31 | M&L for preparation of surfaces plastered or unplastered new surface on wall and applying two coats of white washing complete all as specified and directed. |
| 32 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed. |
| 33 | S&F steel work in tubular or square trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410-W (Gde-E-250 quality A) complete all as specified and directed. |
| 34 | S&F rolled mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe 410-W (Gde-E-250 quality-A) complete all as specified and as directed. |
| 35 | S&F rolled mild steel as in joist, channel, angle or tee sections, fixed independently with connecting base plate etc. as fencing post, strut bend to shape, holes drilled/ notches cut out to receive Ms bolts and barbed wire, embedded to concrete including tarring to steel work embedded to concrete complete all as specified and as directed. |
| 36 | M&L for MS works as in Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 37 | M&L for structural steel work in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 410-W (Grade E-250) quality-A complete all as specified and as directed. |
| 38 | M&L for MS framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and as directed. |
| 39 | S&F 12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and secured the other or screwed the both ends each screwed ends to be fitted with washer and one hexagonal or square nuts exc 5cm and n.exc 10cm long complete all as directed. |
| 40 | Supply only Chain link MS galvanisd fencing, any size or type weighting not less than 2.80 Kg/Sqm complete all as specified and directed. |
| 41 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed. |
| 42 | M&L hardcore of gauge n exc 63mm, broken stone or boulders deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface completed all as specified and directed. |
| 43 | M&L for 100mm thick cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) as in sub completed all as specified and directed. (Using Dimapur Sand) |
| 44 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick set jointed with grey cement and pigments and pointed in neat cement slurry in floors including 15mm thick sreed bed in CM 1:4 complete all as specified and directed. |
| 45 | Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft and loose soil complete all as specified and as directed. |
| 46 | Rolling and consolidating formation surfaces in cutting using hand roller complete all as specified and as directed. |
| 47 | M & L for PCC 1:4:8 Type D2 (Nominal mix) (using 40mm graded stone aggregate), as in foundation, filling and mass concrete complete all as specified and as directed.(Note:- using dimapur sand) |
| 48 | M&L for 75mm thick cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in sub base completed all as specified and directed. (Using Dimapur Sand) |
| 49 | M&L for forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' complete all as specified and directed. |
| 50 | M&L for forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed. |
| 51 | M&L for 25 mm thick cement concrete type B0, 1:2:4 (using 12.5 mm graded stone aggregate) as in flooring surfaces finished even and smooth using extra cement, including waterproof topping 20 mm thickness as specified (incorporating an approved metallic floor hardner) laid on concrete floors and pavings using metalic hardner @ 5% by wt of cement complete all as specified and directed.Note: Metallic floor hardener will be measured and paid separately) |
| 52 | M&L for finished concrete surface by making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. |
| 53 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation n.exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 54 | Excavation over areas not exc 1.5m deep and getting out in soft and loose soil and removing the excavated material/soil upto a distance of 50m complete all as specified and directed. |
| 55 | ditto as per items no. 03 but for each additional 1.5m or part thereof in depth beyond the first 1.5m upto 3.0 m depth complete all as specified. |
| 56 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cms thick in soft/loose soil complete all as specified and as directed. |
| 57 | Removing excavated material/soil not exc 50m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed. |
| 58 | M&L for RCC (Nominal Mix) type B1 1:2:4 (20mm graded aggregate ) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified.(Sand :- Dimapur) Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 59 | M & L for RCC 1:2:4 Type B1 nominal mix (using 20mm graded crushed stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; basesfor columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 60 | M&L for RCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like etc. complete all as specified and directed. Note :- Reinforcement and form work required shall be measured and paid seperately. |
| 61 | Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finised flat surfaces of concrete complete all as specified and directed |
| 62 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat, rough finished surface of concrete complete all as specified and directed. |
| 63 | Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping), fair finished surface of concrete complete all as specified and directed. |
| 64 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 65 | Ditto as per item no 63.00 here-in-above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed. |
| 66 | S&F 1.60mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams including bending or turning up, mitred angles, etc. as required complete all speciified and directed. |
| 67 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in lintel upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, facing courses, parapets and railing upto 60 cm in height , coping, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including formwork complete all as specified and as directed. |
| 68 | M&L for providing cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in copings complete all as specified and directed.(Using Dimapur Sand). |
| 69 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and getting out in soft and loose soil complete all as specified and directed. |
| 70 | M&L for PCC 1:3:6 Type C2 (Nominal mix) (using 40mm graded stone aggregate), as in post holes, foundation, filling and mass concrete complete all as specified and as directed. (Note:- using dimapur sand) |
| 71 | S&F GI tubing 15mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 72 | S&F GI tubing 20mm bore, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 73 | Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 15 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge. |
| 74 | S&F PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed. |
| 75 | S&F PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to wall or laid in trenches or in floors with steel clamps complete all as specified and directed. |
| 76 | S&F 110mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed. |
| 77 | S&F 75mm dia PVC SWR branch bends of any radius with acess door complete all as specified and as directed. |
| 78 | S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia with access door complete all as specified and directed. |
| 79 | S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia with access door complete all as specified and directed. |
| 80 | S&F Grating doom 100 mm dia without waste hole of PTMT (minimum weight - 25 gms) complete all as specified and directed. |
| 81 | S&F Grating doom 100 mm dia with waste hole of PTMT (minimum weight - 100 gms) complete all as specified and directed. |
| 82 | S&F 75mm dia PVC (SWR) floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. |
| 83 | S&F 75mm dia PVC (SWR) Multi floor trap, plain with grating including setting and jointing with solvent cement complete all as specified and directed. |
| 84 | S&F PVC (SWR) reducer for 110mm bore pipe complete all as specified and directed. |
| 85 | M&L for PVC (SWR) vent cowl of bore 75mm complete all as specified and directed. |
| 86 | S&F PVC (SWR) WC connector with lip ring 110 mm. complete all as specified and directed. |
| 87 | M & L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for internal dia of pipe 150mm complete all as specified and directed. |
| 88 | S&F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore complete all as specified and directed. |
| 89 | S&F stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed. |
| 90 | S&F Angle stop valve 20 mm dia cast copper alloy, secrewed down high pressure, with crutch or butterfly handle secrewed both ends for iron pipe and fixed complete all as specified and directed. |
| 91 | S&F 15mm bore bib taps, cast copper alloy, chromium plated fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferule complete all as specified and directed. |
| 92 | M&L for preparation for new or previously untreated plastered surface of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer complete all as specified and directed. |
| 93 | M&L for preparation of new or previously untreated surfaces of walls and applying two coats of oil bound distemper paint over a coat of primer and 1mm thick wall care putty complete all as specified and as directed. |
| 94 | S&F rotational moulded polyethylene water storage tank, ISI marked, 500 litres capacity of multilayered layer wall construction (Cylindrical, vertical with closed top) hoisted and fixed in position including all necessary inlet/outlet connections like ball brass valves of 20mm dia, high pressure with polythene float and fly nut complete, screwed for iron pipe of brass ferrule and fixed in 20mm bore GI tube complete all as specified in SSR Part-I and as directed. |
| 95 | M&L for Vitreous china urinal half stall type, white with grating and union for discharge pipe incl providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets, waste coupling (half or full threaded) 32 mm bore suitable for urinal, flush pipe, waste pipe, grating and union for discharge pipe complete all as specified and directed. |
| 96 | S&F 32mm dia Waste coupling of PTMT (half or full threaded) suitable for urinals complete all as specifed and directed. (Minimum weight 45gms) |
| 97 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 98 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 99 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each complete all as specified and directed. |
| 100 | S&F Aluminium powder coated frame/chowkats for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and as directed. |
| 101 | S&F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc including all fitting complete all specified and directed. |
| 102 | Supply only 4mm thick, ordinary quality frosted/obscure glass fixed to UPVC window/ ventilator in each pane complete all as specified and as directed. |
| 103 | S&F sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified and as directed. |
| 104 | S&F butt hinges, 100mm extruded aluminum alloy with galvanized mild steel hinges pin anodised and fixed type B-21 complete all as specified and directed. |
| 105 | S&F 150 mm long aluminium anodised of extruded section barrel tower bolts complete all as specified and directed. |
| 106 | S&F 150 mm long aluminium alloy handles,fabricated type, anodised complete all as specified and directed. |
| 107 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 108 | S&F Galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 109 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 110 | S&F Pillar taps, 15mm dia cast copper alloy, with capstan heads, chromium plated, but fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 111 | S&F 125mm size chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 112 | S&F Soap dish, CP, white, approximate size 160x 160x90mm Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in- Charge |
| 113 | S&F in repair vitreous china wash basin white, flat back of size 450x300mm including 32mm dia PVC waste pipe CP brass waste coupling 32 mm dia , pair of MS angle brackets or MS fastener/ bolts for fixing arrangements 450mm long pvc connection with PVC nut and washer complete all as specified and directed by Engr-in- charge. |
| 114 | S&F Vitreous China Squatting pan, \\"Orissa\\" pattern, size 580 x 440 mm white with integral foot rests and 10 litres PVC capacity valve less, Syphonic action type, Flushing cistern, low level, white with inlet, ball valve, float and handle including brackets (SLIM LINE or equivalent) including PVC Flush pipe 32 mm dia., and setting the trap and pan in lime concrete 1:2:5 minimum 150 mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed. |
| 115 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.Note :-Dismantling of false ceiling to be carried out carefully without damaging existing fitting and fixtures of flase ceiling items |
| 116 | S&F exposed GI powder coated snap grid frame work for false ceiling of grid size 600 x600mm comprising of wall/cleat angle of size 22 x22 x0.35mm and main/cross tee of size 24 x38 x0.35mm with 4mm dia GI wire as suspender and including 4mm thick Plain E-Board including fixing arrangement from steel truss of any type and applying two coats of oil bound distemper over one coat of chalk whiting complete all as specified and directed. |
| 117 | Dismantling of unframed timber scantling 40 sq .cm and over in section,in any position complete all as specified and directed. |
| 118 | M&L for well seasoned 2nd class hard wood in scantling, clean sawn timber framed work complete all as specified and directed. |
| 119 | M&L for 4mm thick plywood (no of ply 03), grade BWR, type BB fixed with nails or screws to timber frame work complete all as specified and directed. |
| 120 | M&L for 6mm thick plywood (no of ply 05), grade BWR, type BB fixed with nails or screws to timber frame work complete all as specified and directed. |
| 121 | S & F in repairs fancy type decorative Drapary rod of 20mm dia for window and doors with decorative doom holders fixed to wall with screw complete all as specified and directed. |
| 122 | M&L for 2nd class hard wood plain fillets, square, rectangular or triangular in section, sectional area exc 3 Sqcm & n exc 6 sqcm clean sawn, secured with nails or brads complete all as specified and directed. |
| 123 | M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work complete all as specified and directed. |
| 124 | M&L for 12mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber work complete all as specified and directed. |
| 125 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, 30mm width of flaps complete all as specified and directed. |
| 126 | S&F 100mm size extruded brass handles, cast type polished bright complete all as specified and directed. |
| 127 | S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed complete all as specified and directed. |
| 128 | S&F 100 mm long brass chromium plated fancy type barrel tower bolts complete all as specified and directed. |
| 129 | S&F 75mm size cupboard multipurpose lock brass 4 lever Gde I complete all as specifed and directed. |
| 130 | Material and labour for point wiring surface type with two single core 1.5 Sq mm (nominal area) FRLS PVC insulated and unsheathed, multi-stranded, copper conductor cable in and including suitable size PVC casing capping with all fittings and fixing accessories and suitable size PVC box for mounting switches, regulator etc including multi-strand PVC insulated unsheathed stranded copper cable as earth continuity conductor of size 1.5 Sq mm and connecting to light fitting/fans etc complete all as specified and directed for following :- (Colour code to be followed)One light point controlled by one, one way switch |
| 131 | One ceiling/exhaust fan point controlled by one, one way switch |
| 132 | One socket outlet 5 Amps 5 pin on independent board |
| 133 | One socket outlet 5 Amps 5 pin on same board with other switches |
| 134 | All as per item No. 129.00 here in before but with cable size 2.5 Sqmm and earth continuity conductor of 2.5 Sqmm size for one 5 pin 15 Amps socket out let on independent board complete all as specified and directed. |
| 135 | S&F modular switch piano, 6 Amps, single pole, one way complete all as specified and directed. |
| 136 | S&F modular socket outlet 2/3 Pin 6 Amps combined 2 module complete all as specified and directed. |
| 137 | Supply and fixing modular Switch Socket multipurpose 3 pin 16 Amps and 3 pin 6 Amps combined 2 module. |
| 138 | S&F Ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body complete all as specified and directed. |
| 139 | S&F modular switch piano, 16 Amps, single pole, one way complete all as specified and directed. |
| 140 | S&F sheet metal enclosure for MCB’s distribution board, 240 Volts, 8 ways single pole and neutral including 200 Amps rated busbar, neutral link, din rail double door verticle for breaking capacity 10 KA complete all as specified and directed.(Make: Havells or as per list approved makes enclosed hereinafter) |
| 141 | S&F Sheet metal enclousre(for DB's when MCB to be used) single pole and neutral double door with rated bus bar 200 Amps, 4way, 240 Volts without MCB complete all as specified and directed. |
| 142 | S&F MCB single pole and neutral 40 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 143 | S&F MCB single pole 06 to 32 Amps, ‘C’ series 240 Volts, breaking capacity 10KA complete all as specified and directed. |
| 144 | S&F PVC rectangular block for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover of size 250mm x 200mm x 50 mm deep medium quality ISI marked complete all as specified and directed. |
| 145 | S & F LED light fitting 1x20 Watt , 220 V , AC decorative box type with driver , holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 146 | S&F of 1100 volts grade heavy duty cabled PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size complete all as specified and directed. |
| 147 | S&F metal exhaust fan AC single phase 230 volts of size 380mm sweep with louvre complete fixed and opening of wall with suitable MS bolts, grouted to wall and connecting up including provision of cable from connector to fan with flexible cable 24/0.2mm with copper conductor and necessary fitting complete all as specified and directed. |
| 148 | Supply and fixing LED building secuirty light fittings 25 watt 230 V AC out door type with high pressure dia cast aluminium hosing and heat resistant complete with driver , lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed. |
| 149 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed. |
| 150 | M&L for Drilling and tapping cast iron / ductlile iron water mains (in position) for branch connections of the internal dia 20mm complete all as specified and directed. |
| 151 | M&L for laying steel water tubing GI medium grade ISI marked with all fittings laid in trenches or fixed to wall etc complete for 20 mm dia bore complete all as specified and directed. |
| 152 | S&F gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of bore 20mm complete all as specified and directed. |
| 153 | Supply and spread sand in trenches as sand cushioning to underground cable for protection with dry fine river sand and provide required cover after punning down 18CM will be measured and paid complete all as specified and directed. (Note: Thickness of sand cushion after punning down will be measured and paid.) |
| 154 | Supply and laying well burnt sub class ‘B’ bricks ( designated 75) locally available best quality, laid dry in trenches for protection of underground cable complete all as specified and directed. |
| 155 | Supply, laying, Jointing and testing in repair of LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed. |
| 156 | Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: Earth strip beyond 7.5 m length will be measured & paid separately) Please Enable Macros to View BoQ information |
