|
| 1 | M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc all complete all as specified and directed. |
| 2 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed. |
| 3 | M&L for 25 mm thick PCC B-0, (1:2:4) using 12.5 mm graded crushed stone aggregate as in roof padding complete all as specified and directed. |
| 4 | M&L screed bed or bedding layer of cement mortar (1:6) 20mm thick for laying floor finishes complete all as specified. |
| 5 | M&L for applying evenly a priming coat with bituminous primer at 10 kg per 10 sq mtr complete all as specified and as directed |
| 6 | M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application and applying one coat of aluminium paint over APP based membrane @ 0.11Kg/Sqm complete all as specified and as directed. |
| 7 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed. |
| 8 | S&F 0.63mm thick Galvanised corrugated mild steel sheeting with two corrugations side lap, fixed with L-type or J-type cranked hook bolts and washers in roof walls etc with grade of zinc coating 275 completed all as specified and as directed. |
| 9 | S&F 0.63mm plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 etc completed all as specified and as directed. |
| 10 | Supply and fixing 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed. |
| 11 | S&F Prepainted galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 12 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed. |
| 13 | All as per item No.12.00 here-in-above but plain steel sheet as in eaves boarding with necessary fixing arrangement, protective cover for crumple joint, fixed with screws duly grouted to concrete surfaces complete all as specified and as directed. |
| 14 | M&L prime the surface with BTD with water @ 1:1 ratio (200gm BTD 200gm water) and use as primer @400 gm/m2, Allow the primer coat to touch dry condition apply 1st coat of ShaliUrethene® BTD @ 0.8 kg/m2 by brush/roller/airless spray while the primed surface is tacky. For faster and smoother application, apply with airless gun. Allow 1st coat to dry for 10-12 hr and Apply 2nd coat of ShaliUrethene BTD @ 0.8 kg/m2 by brush/roller/airless spray for final DFT of 1200 micron in two coats including taking down old APP membrane and prepration of surface complete all as specified and directed. Make- STP or Equivalent MES approved make. |
| 15 | Disconnecting existing 500 ltrs tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 16 | Disconnecting existing 1000 ltrs tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. |
| 17 | Refixing 20 mm steel water Tubing and connections in existing position of floor, wall or ceiling complete all as directed. |
| 18 | M&L for 20 mm bore tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking down old pipe complete all as specified and directed. |
| 19 | Taking down cement or cement lime plaster any description on any walls etc including raking out joints, hacking etc complete all as specified and as directed. |
| 20 | M&L for 15mm thick rendering with cement mortar (1:4) on fair faces of brick work in two layers (10mm & 5mm) seperately mixed with water proofing compound @ 200ml/50Kg of cement bag on top layer of 5mm thick as per manufacturer's instructions and finishing the surface even and fair without using extra cement complete all as specified and as directed.Note:- WPC shall be measured and paid seperately under relevent item as 'Supply only'. |
| 21 | Supply only liquid water proofing compound complete all as specified and as directed. |
| 22 | M&L for preparing newly plastered surfaces and applying two or more coats of Acrylic Smooth exterior paint of required shade : New work @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed. |
| 23 | Dismantling timber scantlings 40 Sqcm and over in section, in any position complete all as directed. |
| 24 | S&F clean sawn timber of second class hardwood in scantling fixed as in purlins rafters etc complete all as specified and directed |
| 25 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs/ blankets, any thickness, including cover fillets complete all as directed. |
| 26 | S&F powder coated anodised aluminium interlocking snap grid frame work size (600 mm x 600 mm) consists of main tee runners of size 38mm x 25mm x1.5mm and cross wall angle of size 25 mm x 25 mm x 1 mm spaced between the main Tee at 600 mm centre to centre to form a grid of 600 mm x 600 mm etc complete including necessary notching preparing holes and supporting hanger comprising of J hooks soffit cleat holding clip, level clip etc as per manufacturer instructions complete all as specified and directed. |
| 27 | M&L for 4 mm thick, Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and as directed. |
| 28 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc complete all as specified and as directed. |
| 29 | S&F PVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 30 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or fixed to floor for 110 mm bore of pipe complete all as specified and directed. |
| 31 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed. |
| 32 | S&F 110mm bore PVC (SWR) junction, single (Single T) equal or unequal complete all as specified and directed. |
| 33 | S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and as directed. |
| 34 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed |
| 35 | S&F of mild steel framed work such as grills, gratings etc. with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railing, frame work of water tanks and similar work conforming to Fe-290 Grade E-165 complete all as specified and directed. |
| 36 | S&F Steel work in tubular trusses/ purlins/rafts/post etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S. 1161-1998 grade St-240 complete all as specified and directed. |
| 37 | M&L for preparation of new iron and steel surfaces of any description, exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete as specified and directed. |
| 38 | Supply and fixing 500 liters rotational moulded polyethylene water storage tank, multi layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down old tank complete as specified in SSR Part-I complete all as specified and as directed. |
| 39 | Supply and fixing 1000 liters rotational moulded polyethylene water storage tank, triple layered (cylindrical vertical with closed top cover) as per IS-12701-1996, hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. including taking down old tank complete as specified in SSR Part-I complete all as specified and as directed. Please Enable Macros to View BoQ information |
