Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 01-06-2026 | Regarding date | Date | 08-06-2026 |
| Sl. No. | Item Description |
| 1 | Cutting in earth work by mechanical means in all heights and depths in blasting work in hard rock with chiseling and wedging out of rock ( where blasting work is prohibited) and their intermediate classifiction of soils including, dewatering wherever required, setting of the required lines, levels as shown on the drawing and directed by the Engineer-in-charge at site, and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site( to be arranged by the contractor) as per satisfaction of Engineer-in-charge through all modes of transportion including head load, animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools , equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour (if required). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent . Any loss to the public and private property, human being, machinery during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in all kinds of soil such as pick, jumper and ordinary/hard rock including getting out and disposal of excavated earth upto all leads and lifts and entire carriage and other incidentals as directed by the Engineer-in charge. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 3 | Excavation in foundation trenches etc. in earth work in all kinds of soils such as pick work , jumper work, pick work,pick jumper blasting work, blasting work in soft and hard rock conglomrate rock or saturated soil and its intermediate classification of soil including chiseling/wedging out of rocks (where blasting is prohibited) and pumping or bailing out of watering/dewatering upto any lift stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in layers when required into plinth sides of foundations consolidation each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by the Engineer-in charge within any leads including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 4 | Constructing Course rubble hammer dressed 'U' shape open surface drain with side wall. 15x22 cm(fifteen into twenty two centimetre) in cement mortar 1:6 (one Cement : six Sand) and inside plastring with cement plaster 1:3 (one Cement:three Sand) including earth work and laying 10 cm(ten centimetre) cement concrete in 1:5:10 (one Cement : five Sand : ten graded stone aggregate) of 40 mm(forty millimetre) nominal size and 7.5 cm(seven point five centimetre) cement concrete 1:2:4 (one Cement : two Sand : four Graded stone aggregate of 20 mm(twenty millimetre) nominal size) and finished with a floating coat of neat cement complete as per standard design including providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25(twenty five), of size 1000 x 450x50 mm(one thousand into four hundred fifty into fifty millimetre), reinforced with 8 mm(eight millimetre) dia four nos longitudinal & 9(nine) nos cross sectional T.M.T. hoop bars, including providing 50 mm(fifty millimetre) dia perforations @ 100 to 125 mm(one hundred to one hundred twenty five millimetre) c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm(fifty millimetre into one point six millimetre) complete, all as per direction of Engineer-in-charge. including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 5 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations excetra in layers in all depth, consolidating each deposited layer by ramming and watering, lead up to all lead and lifts as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 6 | Providing and laying cement concrete 1:4:8 (one cement : four sand : eight graded crushed/broken stone aggregate 40 mm (forty millimetre nominal size) mechanically mixed and vibrated on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths including cost of form work in open foundation complete as per direction of Engineer-in- Charge including carriage of material within all leads and lifts and other incidentals The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government . |
| 7 | Centering and shuttering including strutting, propping etcetera and removal of form work for Foundations, footings, bases for columns including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 8 | Centering and shuttering including strutting, propping etcetera and removal of form work for Suspended floors, roofs, landings, balconies and access platform including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 9 | Centering and shuttering including strutting, propping etcetera and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 10 | Centering and shuttering including strutting, propping etcetera and removal of form work for Columns, piers, abutments, pillars, posts and struts including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 11 | Centering and shuttering including strutting, propping etcetera and removal of form for stairs, (excluding landings) except spiral-staircases including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 12 | Centering and shuttering including strutting, propping etcetera and removal of form for edges of slabs and breaks in floors and walls under 20 cm (twenty centimetre) wide including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 13 | Centering and shuttering including strutting, propping etcetera and removal of form for cornices and mouldings including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 14 | Centering and shuttering including strutting, propping etcetera and removal of form for walls (any thickness) including attached pilasters, butteresses, plinth and string courses etcetera including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 15 | Providing and laying in position machine batched and machine mixed design mix M-25 (Mix- twenty) grade cement concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of concreteusing to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 (Indian standred nine thousand one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in- charge.“(Note :- Cement content considered in this item is @330kg/cum (at the rate three hundred thirty kilogram per cubic meter).“Excess/ less cement used as per design mix is payable/recoverable separately).All works upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 16 | Providing and laying in position machine batched and machine mixed design mix M-25 (Mix- twenty five) grade cement concrete for reinforced cement concrete work, cement content as per approved design mix, including pumping of concrete using to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS 9103 (Indian standred nine thousand one hundred three) to accelerate, retard setting of concrete, improve work ability without impairing strength and durability as per direction of Engineer-in- charge.“(Note :- Cement content considered in this item is @330 kg/cum (at the rate three hundred thirty kilogram per cubic meter).“Excess/ less cement used as per design mix is payable/recoverable separately).All works above plinth level upto floor V level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 17 | Steel reinforcement of thermo Mechanically Treated bars of grade 500(five hundred) D or more (TATA /SAIL / JINDAL PANTHER/RINL) for R.C.C. (reinforced cement concrete) work including straightening, cutting, bending, placing in position and binding including cost of binding wire all complete upto plinth level. Mild steel and Medium Tensile steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 18 | Providing and fixing sheet covering over expansion joints with iron screws as per design aluminium fluted strips 3.15 mm (three point fifteen millimetre) thick 150 mm (one hundred fifty millimetre) wide as per directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 19 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class designation 7.5 (seven point five) in foundation and plinth in cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of 1st class designation 7.5 (seven point five) in superstructure above plinth level up to all floor level in all shapes and sizes in cement mortar 1:6 (one cement : six coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 21 | Brick work in plain arches in superstructure above plinth level and upto all floor level including centering and shuttering complete for span up to 6 (six) metres with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in cement mortar 1:3 (one cement : three coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 22 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in superstructure above plinth level up to all floor level in cement mortar 1:4 (one cement :four coarse sand) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 23 | Extra for providing and placing in position 2 Nos (two numbers) 6mm (six millimetre) dia. M.S. bars at every third course of half brick masonry as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 24 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length second class teak wood as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 25 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length kiln seasoned and chemically treated sal wood as per direction of Engineer-in-charge including entire carriage of material in all leads and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 26 | Providing and fixing 35 mm (thirty five millimetre) thick including ISI marked Stainless Steel butt hinges with necessary screws ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 27 | Providing and fixing 600 mm(six hundred millimetre) bright finished brass Brass handles with screws etc. complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 28 | Providing and fixing 300x16mm (Three hundred into sixteen millimetre) Brass sliding door bolts, of required colour or shade, with nuts and screws etc. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 150x10 mm ( one hundred fifty into ten millimetre) bright finished brass tower bolts (barrel type) with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing 300x16mm (Three hundred into sixteen millimetre) nominal size. aluminium sliding door bolts, ISI(Indian Standards Institute) marked anodised (anodic coating not less than grade AC 10 (Ten) as per IS : 1868(Indian Standred one thousand eight hundred sixty eight), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 31 | Providing and fixing 300mm (three hundred millimetre) American aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 32 | Providing and fixing 150x10 mm ( one hundred fifty into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 33 | Providing and fixing aluminium adjustable friction windows stays 150 X 19 mm (one hundred fifty into nineteen millimetre),of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer-in-charge complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 34 | Providing and fixing bright finished brass hanging type floor door stopper 150mm(one hundred fifty millimetre) with necessary screws, etc. complete. including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing aluminium sheet 4mm(four millimetre) thick in shutters and partition with rubber warsel complete with EPDM rubber / neoprene gasket etc.necessary screws, etc. complete.including carriage of materials in all leads and lifts as per direction of engineer in charge. including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing bright finished brass 100 mm (one hundred millimetre) mortice latch and lock with 6 (six) levers and a pair of lever handles of approved quality with necessary screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg (thirty six kilogram) to 80 kg (eighty kilogram) and door width from 701 mm (seven hundred one millimetre) to 1000 mm (one thousand millimetre), with double speed adjustment with necessary accessories and screws etcetera complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 38 | Structural steel work riveted, bolted or welded in built up sections (TATA/SAIL/Apollo/JSW Make ), trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 39 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ), framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required in stringers, treads, landings etcetera of stair cases, including use of chequered plate wherever required, all complete as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 40 | Steel work welded in built up sections (TATA/SAIL/Apollo/JSW Make ), framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required in gratings, frames, guard bar, ladder, railings, brackets, gates and similar works as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 41 | Providing and laying 12 mm (twelve millimetre) cement plaster of mix 1:4 (one cement: four coarse sand) upto all floor level as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 42 | Providing and laying 12 mm (twelve millimetre) cement plaster of mix 1:6 (one cement: six coarse sand) upto all floor level as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 43 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:4 (one cement : four course sand) upto all floors levels including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 44 | Providing and laying 15 mm (fifteen millimetre) cement plaster on rough side of single or half brick wall of mix 1:6 (one cement : Six course sand) upto all floors levels including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 45 | 18 mm (eighteen millimetre) cement plaster in two coats under layer 12 mm (twelve millimetre) thick cement plaster 1:5 (one cement : five coarse sand) finished with a top layer 6 mm (six millimetre) thick cement plaster 1:6 (one cement : six fine sand) upto all floor level including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 46 | Providing and applying plaster of paris putty of 2 mm (two millimetre) thickness over plastered surface to prepare the surface even and smooth complete upto all floor level including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 47 | Distempering with Oil Bound Washable Distemper of approved brand and manufacture to give an even shade on new work (two or more coats) over and including water thinnable priming coat with cement primer of ASIAN/NEROLAC/ICI-DULUX complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 48 | Finishing walls with textured exterior paint of required shade new work (Two or more coats applied @ 3.28 ltr/10 sqm) (three point twenty eight liter per ten square metre) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (two point twenty kilogram per ten square metre) (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 49 | Finishing walls with 100%(Hundred percent) Premium acrylic emulsion paint having VOC less than 50(fifty) gram/litre and UV resistance as per IS 15489:2004(indian standard fifteen thousand four hundred eighty nine : two thousand four), Alkali and fungal resistance, dirt resistance exterior paint (ASIAN- APEX ULTIMA /NEROLAC- Wheather Shield) of required shade (Company Depot Tinted) with silicon additives on new work (Two or more coats applied @1.43 litre/ 10 sqm(One point forty three litre per ten square metre). Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm(zero point ninety litre per ten square metre) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 50 | Applying priming coat with ready mixed pink or Grey primer of (ASAIN/NEROLAC/ICI-DULUX ) approved brand and manufacture on wood work (hard and soft wood) as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 51 | Applying priming coat with ready mixed red oxide zinc chromate primer (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture on steel galvanised iron/ steel works as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 52 | Painting with synthetic enamel paint (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 53 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections (JINDAL/HINDALCO/BALCO) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) for fixed portion polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 54 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections (JINDAL/HINDALCO/BALCO) of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, at top, bottom and sides with required EPDM rubber/ neoprene gasket etcetera. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) for shutters of doors, windows and ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 55 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket (JINDAL/HINDALCO /BALCO) etcetera complete as per the architectural drawings and the directions of engineer-in-charge With toughned glass panes of 6 mm(six millimetre) thickness Toughened Glass (weight not less than 15.00 kg/ sqm) (fifteen point zero zero kilogram per square metre) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 56 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg (one hundred twenty five kilogram), for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etcetera complete as per the direction of Engineer-in-charge with brass cover plate minimum 1.25 mm (one point twenty five millimetre) thickness including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 57 | Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etcetera complete polyester powder coated minimum thickness 50 (fifty) micron aluminium as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 58 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of Ist course of applying cement slurry @ 4.4 kg/sqm (four point four kilogram per square metre) mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface, IInd course of 20 mm (twenty millimetre) cement plaster 1:3 (one cement : three coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface, IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg./sqm (one point seven kilogram per square metre) of area, IVth course of 400 (four hundred ) micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm (one hundred millimetre) wide and pasted to each other with bitumen @ 1.7 kg/sqm (one point seven kilogram per square metre) as per direction of Engineer- in-charge complete including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 59 | Providing and fixing 12.5 mm(twelve point five millimetre) thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS certification marks)false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm(one hundred twenty grams per square metre) (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm(twenty five millimetre) wide x 1.6 mm (one point six millimetre) thick with flanges of 27 mm(twenty seven millimetre) and 37mm(thirty seven millimetre), at 1200 mm (one thousand two hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia(twelve point five millimetre dia into fifty millimetre long with six millimetre dia) bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm(twenty into ten into zero point five zero millimetre) of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm(forty five into fifteen into zero point nine millimetre) running at the spacing of 1200 mm (one thousand two hundred millimetre) centre to centre, to which the ceiling section 0.5 mm (zero point five millimetre) thick bottom wedge of 80 mm (eighty millimetre) with tapered flanges of 26 mm(twenty six millimetre) each having lips of 10.5 mm (ten point five millimetre), at 450 mm (four hundred fifty millimetre) centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm(two point sixty four millimetre dia into two hundred thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm(zero point five millimetre) thick 27 mm (twenty seven millimetre) high having flanges of 20 mm(twenty millimetre) and 30 mm(thirty millimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm (four hundred fifty millimetre) centre, with 25mm (twenty five millimetre) long dry wall screws @ 230 mm (two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm(three point five into twenty five millimetre) at 230 mm (two hundred thirty millimetre) center to center including jointing and finishing to a flush finish of tapered and square edges of the board with ecommended jointing compound , jointing tapes , finishing with jointing compound in 3(three) layers covering upto 150 mm(one hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and ther incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 60 | Providing and fixing mineral fibre false ceiling With 15 mm(fifteen millimetre)) thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) tiles at all heights of size 595X595mm(five hundred ninety five millimetre into five hundred ninety five millimetre) of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%(ninety nine percent), Light Reflectance ?85%(eighty five percent), Thermal Conductivity k = 0.052 - 0.057(zero point zero five two to zero point five seven) w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm(zero point three three millimetre) thick (galvanized @120(one hundred twenty) gsm )comprising of main T runners of 15x32 mm(fifteen into thirty two millimetre) of length 3000 mm(three thousand millimetre), cross T of size 15x32mm(fifteen into thirty two millimetre) of length 1200 mm(one thousand two hundred millimetre) and secondary intermediate cross T of size 15x32 mm(fifteen into thirty two millimetre) of length 600 mm(six hundred millimetre) to form grid module of size 600x600 mm((six hundred into six hundred millimetre) suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm(fifty millimettre) long 8mm(eight millimetre) outer diameter M-6 dash fasteners, 6 mm(six millimetre) diameter fully threaded hanger rod up to 1000 mm(one hundred millimetre) length and L-shape level adjuster of size 85x25x2 mm(eighty five into eighty five into two millimetre), spaced at 1200 mm(one thousand two hundred millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm(twenty four into twenty four into three thousand millimetre) made of 0.40 mm(zero point forty millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm(four hundred fifty millimetre) centre to centre & 40 mm(forty millimetre) long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 61 | Tile brick masonry/cladding with common burnt clay F.P.S. (non modular) tile bricks of class designation 10(ten) in gauged arch work in superstructure above plinth and upto floor five level in cement mortar 1:4 (one cement : four coarse sand) including centering and shuttering complete.. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 62 | 20 mm thick moulded cement mortar band in two coats under layer 12 mm thick with cement mortar 1:5 (1 cement : 5 coarse sand) top layer 6 mm thick with cement mortar 1:4 (1 cement : 4 fine sand). The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.as per the direction by the Engineer in charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 63 | Providing and laying Polished Granite stone slab with shade of two colour No. kotkasta and tan brown shade of superior quality in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm(eighteen millimetre) thick stone slab over 20 mm(twenty millimetre) (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent all complete as specified as per direction of Engineer-in-charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 64 | Providing and laying vitrified floor tiles sizes 600x1200mm (six hundred into one thousand two hundred hundred millimetre) size of Somany made double charged (minimum thickness 10mm(ten millimetre) RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved shade with water absorption less than 0.08%(zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement :four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etc., complete. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 65 | Providing and laying Vitrified tiles size 600x1200mm (six hundred into one thousand two hundred hundred millimetre) of Somany made double charged ( (minimum thickness 10mm(ten millimetre), RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON with water absorption less than 0.08 % and conforming to I.S.15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm(twelve millimetre) thick bed of cement mortar 1:3 (one cement:three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogram per square metre) including grouting the joint with white cement & matching pigments etc. complete.. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 66 | Providing and fixing 1st quality ceramic glazed wall tiles having size 600x600mm(six hundred into six hundred hundred millimetre) conforming to IS :15622 ( (minimum thickness 10mm(ten millimetre) RESTILE/ NITCO/ RANK/ /KAJARIA/ ORIENT & BELL/ SIMPOLO/ JOHNSON of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm(twelve millimetre) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm(three point three kilogram per square metre) including pointing in white cement mixed with pigment of matching shade complete. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 67 | Polishing two coats with PU Glosh finish french polish brown on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler.The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 68 | Extra for additional height in centering,shuttering where ever required with adequate bracing, propping etcetera including cost of de-shuttering and decentering at all levels,over a height of 3.5m (three point five metre), for every addition all height of 1 metre (one metre) or part thereof (Plan area to be measured) Suspended floors, roofs, landing, beams and balconies (Plan area to be measured) as per direction of the Engineer-in- Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. |
| 69 | Providing and applying Ultraplast B APP- 3mm(three millimetre) (Atactic Polypropylene Polymer) Over the cement fibre board modified water proofing membrane reinforced with non- woven polyester matt 160±20 g/m2(one hundred sixty plus minus twenty gramme per square metre) having polymer film as a top surface of technonicol or equavalent. Minimum tensile strength in longitudinal and transverse direction as 750N±150 / 600N±120/5cm(seven hundred fiftyN plus minus one hundred fifty oblique six hundred N plus minus one hundred twenty oblique five centimetre) (ASTM D 5147). Minimum nail shank tear resistance in longitudinal and transverse direction as 300/300N±100(three hundred oblique three hundred plus minus one hundred) Nelongation in Longitudinal and transverse direction 40±8% / 45±9%(forty plus minus eight percent oblique forty five plus minus nine percent). Softening point of membrane not less than 150±5 (one hundredfifty plus minus five)Degree Celsius, with cold flexibility -2(two) degree, consisting of a coat of Technonicol no 01(one) primer (organic solvent based primer) @ 0.25- 0.35 ltr./sq.mtr (zero point twenty five to zero poit thirty five liter per square metre) with a relative viscosity of 15-40(fifteen to forty) over the primer coat, the layer of membrane shall be laid using Butane / LPG torch and sealing all joints with minimum 75 mm (seventy five millimeter) side laps & 100 mm(one hundred millimetre) end laps to form a monolithic system. Approved make : Technonicol or equavlent. Including entire carriage of material within all leads & lifts, complete all as per (deemand rate 516, given 440 P.R.) including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 70 | Providing and laying 600x600mm (six hundred into six hundred millimetre) Outdoor cool floor tiles ORIENT etc in different sizes (minimum thickness 10mm) with water absorption less than 0.08% (zero point zero eight percent)and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm(three point three kilogramme per square metre) including grouting the joints with white cement and matching pigments etc., complete including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 71 | Expansion Joint Treatment upto 150 mm (one hundred fifty millimetre): - Dismantling/ Removing previous Treatment if any. Prepare the substrate by cleaning and must be mineral, dry, stable, solid and clean. Loose ingredients, release agents, formwork oil, grease and other adhesion-reducing layers have to be removed first before using Joint Tape EPDM. The age of the concrete should be, at least 3-4(three to four) weeks, depending on climate. Damaged areas, cracks and holes can be reprofiled with Poxy Fix 005(zero zero five). Pull of strength of concrete should be greater than 1.5(one point five) MPa. Providing and applying - first the PoxyFix 005(zero zero five) is mixed homogeneously in the right mixing ratio. Therefore, component B is fully mixed with component A. Choose a suitable mixing device, mix at least 3(three) minutes thoroughly, as long as there are no more visible colour streaks in the mass. Refilling the product in a clean container and briefly mixing it again, just to ensure to get a homogenous mass. The mixing device should mix on low speed to avoid forming of air bubbles. Providing and fixing Joint Tape EPDM upto 450 mm wide as per requirement on expansion joint as per TDS application methodology. including carriage of materials with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 72 | Providing and fixing M.S. BP Sheet 1.66mm to 2mm(one point sixty six millimetre to two millimetre) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) |
| 73 | Providing and laying cement concrete 1:5:10 mechanically mixed (one cement : Five sand : ten graded crushed / broken stone aggregate 40mm (forty millimetre nominal size) and curing complete including the cost of form work with M.S plates for plain concrete on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights and depths. In retaining walls / breast walls and as per direction of Engineer-in- Charge including entire carriage of material with in all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, GST or other taxes imposed by the Government. . |
| 74 | Providing and laying in cement concrete grade 1:3:6 (one cement :three coarse sand :six graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m(one point five meter), transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m (one thousand metre)as per Technical Specification Clause 301.5 as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 76 | Providing and laying World Athletics Approved Synthetic Athletics Track FULL PUR system minimum thickness not less than as prescribed in World Athletics Track & Field Facilities Manual, 2019 including line marking and obtaining class II certification from World Athletics. The certificate must mention the thickness of the product. The product must be free of Volatile Organic compound (report should be attached with the specs). FULL PUR System duly World Athletics certified, spread with SBR (recycled rubber) in first 2 layers and colored EPDM Granules in final layer must be water impermeable layer consist of bound sub base (closed asphalt), for rubber granules 1-4 mm fixed with a cast coating 4 mm per layer & structured cast coating of appropriate thickness SPREAD WITH EPDM 1-4 MM. System should fulfill the following properties - Water impermeable, Pore-filled, self leveling, joint less, granulated surface for anti slip properties can handle constant stresses by spikes, dynamic elasticity, excellent appearance & colours, including markings on the surface all complete as per requirements/ specifications laid down by World Athletics all complete as per the directions of Engineer-in-Charge. as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and laying in cement concrete grade 1:2:4 (one cement :two coarse sand :four graded stone aggreate) 20 mm(Twenty milimillter) norminal size grade excluding the cost of centering and shuttering upto plinth level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Providing and fixing 110mm(one hundred ten millimeter) dia. high pressure PVC spigot and socket, waste and ventilating pipes ISI (Indian standard Institute) marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 79 | Providng and fixing 110mm(one hundred ten millimeter) dia. PVC (Polyvinyl chloride) plain bend ISI(Indian Standards Institute.) marked including fixing with approved adhesive etc. complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 80 | Constructing masonry Chamber 30x30x50 cm(thirty into thirty into fifty centimetre) inside, in brick work in cement mortar 1:4 (one cement :four coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm(one hundred into one hundred into seventy five millimetre) (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (one cement : two coarse sand : four graded stone aggregate 20 mm(twenty millimetre) nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( one cement : five fine sand : ten graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (one cement : three coarse sand) 12mm(twelve millimetre) thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 81 | Providing and laying 6 mm (six millimetre) cement plaster of mix 1:3 (one cement : thre fine sand) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 82 | Supplying, filling, spreading and leveling stone boulders of size range 5 cm to 20 cm (five centimetre to twenty centimetre), in recharge pit, in the required thickness, as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 83 | Supplying and fixing C.I. cover without frame for manholes 455x610 mm (four hundred fifty five into six hundred ten millimetre)rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg(twenty three kilogramme) including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 84 | Providing and fixing White Vitreous china Orissa pattern W.C. pan of size 580x440 mm(five hundred eighty into four hundred forty millimetre) with integral type foot rests water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10(ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 85 | Providing and fixing Flexible pipe 40 mm (forty millimetre) dia P.V.C waste pipe for sink or wash basin including P.V.C waste fitting complete as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 86 | Supply, installation and commissioning of ''CP WASTE JALI Model No;ALD-729- Jaquar or equivalent. Item includes all hardware required for installation. as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 87 | Supply, installation and commissioning of ''BOTTLE TRAP (with internal partition) 32 mm(thirty two millimetre) size with 250 mm & 190mm(two hundred fifty millimetre and one hundred ninety millimetre) long wall connection pipeS Model No;ALD-769L 250x190(two hundred fifty millimetre into one hundred ninety millimetre)- Jaquar or equivalent. Item includes all hardware required for installation. as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 88 | Supply, installation and commissioning of ''ANGULAR STOP COCK with wall flange Model No;VGP-81053- Jaquar or equivalent. Item includes all hardware required for installation. as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 89 | Supply, installation and commissioning of ''FLOOR MOUNTED WC Hindware or equivalent. Item includes all hardware required for installation. as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 90 | Supply, installation and commissioning of ''HAND DRYER, Hindware/Jaquar or equivalent. Item includes all hardware required for installation. as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 91 | Supply, installation and commissioning of ''CP GRATING, Hindware/Jaquar or equivalent. Item includes all hardware required for installation. as directions of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing 15 mm (fifteen millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 93 | Providing and fixing 20 mm (twenty millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 94 | Providing and fixing 25 mm (twenty five millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 95 | Providing and fixing 32 mm (thirty two millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 96 | Providing and fixing 40 mm (fourty millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing 50 mm (fifty millimetre) outer dia pipe Internal work Exposed on wall Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all (CPVC) plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 98 | Providing and fixing 25 mm (twenty five millimetre) outer dia Concealed work including cutting chases and making good the walls etcetera Chlorinate Polyvinyl Chloride (CPVC) pipes having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipe with clamps at 1.00 mtr. ( one metre) spacing. This including jointing of pipes and fittings with one step CPVC solvent cement and the cost of cutting chases and making good the the same including testing of joints complete as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 99 | Providing and fixing 25 mm (twenty five millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing 32 mm (thirty two millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing 40 mm (fourty millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 102 | Providing and fixing 50 mm (fifty millimetre) dia nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 103 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 104 | Providing and fixing 15mm nominal bore C.P.brass bib cock of approved quality conforming to IS : 8931(of Jaquar make) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 105 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P.brass long body bib cock of approved quality (of Jaquar make) conforming to IS standard and Weighing not less than 690 gms (six hundred ninety grams) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 106 | Providing and fixing 15 mm (fifteen millimetre) nominal bore C.P. bass angle valve for basin mixer and geyser points of approved quality conforming to I.S:8931 a) as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 107 | Providing and fixing 40 mm (fourty millimetre) dia nominal bore GI Pipe complete with GI fittings including trenching and refilling etcetra as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. |
| 108 | Providing and fixing 50 mm (fifty millimetre) dia nominal bore GI Pipe complete with GI fittings including trenching and refilling etcetra as per direction of Engineer-in-Charge including entire carriage of material in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality malkana ,toll tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
