Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Excavation in foundation, trenches etcetra in earth work in all kind of classification of soil such as pick work, jumper work, pick jumper work, blasting work, soft and hard blasting and doing work in saturated soil, including chiselling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de watering or removal of slush, lift upto any height stacking the excavated soil clear from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specification, approved drawings, design as per the entire satisfactions and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Providing and fixing 18 mm (Eighteen millimetre) thick gang saw cut, mirror polished, premoulded and prepolished, machine cut one piece for kitchen platforms, vanity counters, window sills, facias stair steps and similar locations of required size, approved shade, colour and texture laid over 20 mm (Twenty millimetre) thick base cement mortar 1:4 (one cement : four coarse sand), jointstreated with white cement, mixed with matching pigment, epoxy touch ups,including rubbing, curing, moulding and polishing to edges to give high gloss finish etcetera Granite of any colour and shade complete at all levels. complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 3 | Structural steel work of (TATA/SAIL/Apollo/JSW Make ), riveted, bolted or welded in built up sections/, trusses and framed work , including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete In trusses and trussed purlins in building complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 4 | Providing and fixing prepainted Sandwitch puff roofing with top skin 0.60mm ( zero point sixty millimetre) thickness prepainted profile sheet made of cold rolled steel coil having a puff ( Polyurethene foam) depth of 50mm ( fifty millimetre) and interior skin of prepainted galvanised iron profile sheet of TATA/JSW make (size shape and pitch of corrugation as approved by Engineer-in-charge) 0.40 mm ( zero point forty millimetre) (+0.05%) ( Plus zero point zero five percentage) total coated thickness with Zinc coating 120 ( one hundred twenty) grams per square meter as per IS: 277 ( two hundred seventy seven) in 240 ( two hundred forty) MPA steel grade, 5-7 ( five- seven) micron epoxy primer on both side of sheet and Polyster top coat 15-18 ( fifteen - eingteen) microns sheet should having protective guard film of 25 ( twenty five) micron minimium to avoid scratches by Engineer in-Charge. Sheet shall be fixes using self drilling/ self tapping screw of size (5.50 x55mm) ( five point fifty into fifty five millimetre) with EPDM seal complete upto any pitch in Horizontal/ vetical or curved surface excluding the cost of Purlin, rafter and Trusses and including cutting to size and shape whatever required complete upto all floor level/ Height including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 5 | Providing and laying in position machine batched and machine mixed cement concrete work of grade M-30 (Thirty) design mix to obtain the minimum compressive strength of 30N/mm square (Thirty newton per square millimetre) with cement contents not less than @ 400 Kilogram/Cubic metres (at the rate Four hundred kilogram Per Cubic metre) or as per approved design mix for all works upto plinth level to give a smooth surfaces machanically mixed and vibrated including curing complete and pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 (Indian Standard : Ninty one hundred three) to accelerate, retard setting of concrete, improve workability without impairing strength and durability etcetera upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 6 | Steel reinforcement (SAIL / TISCO/RINL/JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 7 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm ( one hundred twenty gram per square metre) (both side inclusive) as per IS : 277 ( two hundred seventy seven) and consisting of angle cleats of size 25 mm ( twenty five millimetre) wide x 1.6 mm ( one point six millimetre) thick with flanges of 27 mm ( twenty seven millimetre) and 37mm ( thity seven millimetre) , at 1200 mm ( one thousand two hundred millimetre) centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm ( twelve point five millimetre) dia x 50mm ( fifty millimetre) long with 6mm ( six millimetre) dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm ( twenty five into ten into zero point five zero millimetre) of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm ( forty five into fifteen into zero point nine millietre) running at the spacing of 1200 mm ( one thousand two hundred millimetre) centre to centre, to which the ceiling section 0.5 mm ( zero point five millimetre) thick bottom wedge of 80 mm ( eighty millimetre) with tapered flanges of 26 mm ( twenty six millimetre) each having lips of 10.5 mm ( ten point five millimetre) , at 450 mm ( four hundred fifty millimetre) centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm ( two point six four millimetre) dia x 230 mm ( two hundred thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm ( zero point five millimetre) thick 27 mm ( twenty seven millimetre) high having flanges of 20 mm ( twenty millimetre) and 30 mm ( thirty millimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm ( four hundred fifty millimetre) centre, with 25mm ( twenty five millimetre) long dry wall screws @ 230 mm ( two hundred thirty millimetre) interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm ( three point five into twenty five millimetre) at 230 mm c/c ( two hundred thirty millimetre center to center) , including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 ( three) layers covering upto 150 mm ( one hundred fifty millimetre) on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm ( twelve point five millimetre) thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) : 2011 (Board with BIS Certification marks) upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 8 | Providing and laying Tremix flooring 100mm (one hundred millimeter) thick with RCC M-30 ( M-thirty) grade design mix finished with a floating coat of neat cement, to be done in panel and each panel shall be of 3.50 ( three point fifty) meter and appropriate reinforcement bar shall be laid in layer of two or one keeping the concrete cover of 50 ( fifty) (it may differ as per standard). Casting of concrete flooring in panels to avoid shrinkage cracks and work as expansion joints, an appropriate steel bar shall be laid in layer two or one keeping the concrete cover of 50 mm ( fifty millimetre) .The rate to include cost of all materials, labour,equipments involved in operations described above but excluding the cost of reinforcement steel and sealants which shall be paid separately upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 9 | Providing and fixing 90cm ( ninety centimetre) wide corrugated cold form decking sheet with required number of shear struds as specified by designer upto 7.20 ( seven point twenty ) metre in length manufactured from hot dipped zink coated high strength steel with minimum 550 ( five hundred fifty) Mpa yeild strength and minimum zink coating mass of 275 Grm ( two hundred seventy five gram) per square metre on both side of street. The steel confirms to AS 1397 and BSEN 10147:2000.Cross corrugation to be provide by cutting out the corrugation and placed at maximum spacing of 50 cm center to center. The cross corrugation at the edges shall at 10Cm ( ten centimetre) from the edge upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 10 | Providing and fixing 1st quality HD series Vitrified Digital Glazed rectified ceramic glazed wall tiles 600mmx1200 mm ( Six hundred millimetre into one thousand two hundred millimetre ) conforming to IS : 15622 (minimum thickness 10mm ( ten millimetre) ) of Orient bell/ Kazaria/ Rak/Johnson and Johnson make , in all colours, shades except burgundy, bottle green, black as approved by Engineer-in Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointings in white cement mixed with pigment of matching shade complete in pattern finish approved upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 11 | Providing and Fixing CubicleToilet Partition including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 12 | Design, Manufacturing and installation of 2mm ( two millimetre) thick perforated aluminium sheet of 1200 ( one thousand two hundred ) grade alloy with pure polyster coating for facade work complete in all respect as per design and color approved by Engineer-in-charge including Back frame if any etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 13 | Providing and Fixing Dholpur Beige Stone Cladding upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 14 | Providing and Fixing Rajasthan Local Stone upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 15 | Providing and Fixing 6mm ( six millimetre) decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 16 | Providing and fixing plain multipurpose ACP sheet of approved brand and manufacture (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etcetera complete upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 17 | Providing and laying at or near ground level factory made kerb stone of M-30 ( M-thirty) grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (one cement: three coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm ( five millimetre) ), including making drainage opening wherever required complete etcetera as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 18 | Providing and fixing RCC Soucer Drain M-30 ( M-thirty) Grade of width 450mm ( four hundred fifty millimetre) and length 300mm ( three hundred millimetre) including fixing in position with proper drainage slope including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 19 | Providing edge moulding, nosing to 18mm (Eighteen millimetre) thick marble stone counters, Vanities etcetera, including machine polishing to edge to give high gloss finish etcetera complete as per design approved by Engineer-in-Charge. Granite work complete as per architectural drawings including carriage of material within all leads, lifts and other incidentals, as per approved specifications, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, GST and any other taxes imposed by the Government. |
| 20 | Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etcetera Including moulding, rubbing and polishing of cut edges etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 21 | Providing and Fixing Under Counter BASIN With Fixing Accessories Size 590x430x215mm ( five hundred ninety into four hundred thirty into two hundred fifteen millimetre),shape rectangular Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 22 | Providing and Fixing Wall Hung Semi Pedestal Wash Basin with fixing accessories, size 570x470x190 mm ( five hundred seventy into four hundred seventy into one hundred ninety millimetre) sshape rectangular Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 23 | Providing and Fixing Rimless Wall Hung WC with US soft close slim seat cover, Hinges, Accessrios set size 380x515x360 mm ( three hundred eighty into five hundred fifteen into three hundred sixty millimetre) Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 24 | Providing and Fixing Single piece slim concealed Cistern body with kit Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 25 | Providing and Fixing Control Plate Area (Chrome) Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 26 | Providing and Fixing Single Lever Basin Mixer without popup waste and 450mm ( four hundred fifty millimetre) long Braided Hoses Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 27 | Providing and Fixing Waste coupling 32mm ( thirty two millimetre) size full thread with 80mm ( Eighty millimetre) height Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 28 | Providing and Fixing Bottle Trap 32mm ( thirty two millimetre) size with 300mm ( three hundred millimetre) and 190mm ( one hundred ninety millimetre) long wall connection pipes and wall flange Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 29 | Providing and Fixing Angular Stop Cock with Wall Flange Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 30 | Providing and Fixing Urinal (Back inlet) with fixing accessories size 385x325x635mm ( three hundred eighty five into three hundred twenty five into six hundred thirty five millimetre) Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 31 | Providing and Fixing Sensor Urinal Flusher Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 32 | Providing and Fixing Hand Shower (Health Faucet With 8mm ( eight millimetre) Dia,1.2 ( one point two) Meter Long Flexible Tube & Wall Hook Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 33 | Providing and Fixing Toilet Paper Holder With Flap-Chrome Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 34 | Providing and Fixing Bib Cock With Wall Flange Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 35 | Providing and Fixing Single Lever Sink Mixture With Swinging Spout and 450 mm ( four hundred fifty millimetre) Long Braided Hoses Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 36 | Providing and Fixing Horizontal Soap Dispenser Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 37 | Providing and Fixing Hand Dryer Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 38 | Providing and Fixing Straight Disabled Grab Bar 600mm ( Six hundred millimetre) Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 39 | Providing and Fixing Swing Disabled Grab Bar Jaquar make complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 40 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Foundation footings, bases of columns, etcetera for mass concrete as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 41 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Columns, pillars, piers, abutments,posts and struts as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 42 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Vertical surface such as wall and thickness partition and the like including attached pillaters, buttresses, plinth and string course and the like as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 43 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Beams , cantilevers, girder and lintels , sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels in any depth in all height from floor as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 44 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Suspended floors, roofs , landings, balconies and access platform as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 45 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Edges of slabs and breaks in floors and walls as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 46 | Providing form work with steel plates 3.15mm. (Three decimal one five millimetre) thick welded with angle iron frame of 30x30x5mm.,(Thirty into thirty into five milimetre) so as to give a fair finish including centring,shuttering strutting and propping etcetra with wooden battens and ballies upto all heights/ depth of propping and centering below supporting floor to ceiling for all height and removal of the same for insitu- reinforced concrete and plain concrete work in Stairs (excluding landing) except spiral stair case as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana, toll tax, sale tax, GST or any other taxes imposed by the Government |
| 47 | Providing and fixing 12 mm ( twelve millimetre) thick frameless toughened glass door shutter of approved brand and manufacture,( Modi float, Saint Govind, Asahi make ) including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etcetera for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etcetera to be paid separately) complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 48 | Providing and fixing Multi Wall polycarbonate transparent/skylight sheet 10mm ( ten millimetre) thick in roofing/flashing/ridges,valleys etcetera with necessary Galvanised screws, nuts, washer etcetera complete with all accessories as required as per approved make (Lexun, Duratuff, Suntuff (PalRam) in all shades like Clear transparent, Bronze, Grey, Gold, Aqua Green (Solar Olympic), Solar Ice, etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 49 | Providing and laying 100x300mm ( one hundred into three hundred millimetre) Full body vitrified floor tiles in different sizes (minimum thickness 10mm ( ten millimetre) ) Orient bell/ Kazaria/ Rak/Johnson and Johnson make , with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand ), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 50 | Providing and laying 300x300 mm ( three hundred into three hundred millimetre) Full body vitrified floor tiles in different sizes (minimum thickness 10mm ( ten millimetre) Orient bell/ Kazaria/ Rak/Johnson and Johnson make with water absorption less than 0.08% ( zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm ( twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand ), jointing with grey cement slurry @ 3.3 kg/ sqm ( three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera complete upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 51 | Wall Painting two or more coats on new work with Luxury Emulsion, Asian Paint -8465 (Desert Beige) paint of approved brand and manufacture to give an even shade upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 52 | Wall Painting two or more coats on new work with Texture Paint, Asian Paint -8465 (Desert Beige) paint of approved brand and manufacture to give an even shade upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 53 | Providing and fixing of Acoustical wooden grooved panel having system NRC up to 0.88 ( zero point eighty eight) with lineal perforation. The high grade HDDMR panels shall be melamine laminate of size 2440mm x128mm x 16mm ( two thousand four hundred forty millimetre into one hundred twenty eight millimetre into sixteen millimetre) with 4mm ( four millimetre) groove at 28mm ( twenty eight millimetre) pitch, Tongue and Groove edges for seamless mounting having density of 800kg/m3 ( eight hundred kilogram per cubic metre) (base panel confirming to IS 12406 and laminated panel confirming to IS 14587). The back of the panels are perforated with a nonwoven fabric covering of 0.2mm ( zero point two millimetre) for providing Sound absorption via the acoustic impedance method. Panel is fixed by using GI Framework 2400mmx50mm x 0.50mm ( two thousand four hundred millimetre into fifty millimetre into zero point fifty millimetre) spaced at 600mmx600mm c/c ( six hundred millimetre into six hundred millimetre center to center) and 12 mm ( twelve millimetre) ply framework spaced at 400mm ( four hundred millimetre) centers with suitable brackets and the system is backline with 50 mm ( fifty millimetre) Rockwool insulation @48kg ( forty eight kilogram) density and along with all accessories example: chicken mesh and all. MAKE: Armstrong/Prolad/Anakon upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 54 | Providing and Fixing of Spandex System on G.I studs 2400mm X 50mm ( two thousand four hundred millimetre into fifty millimetre) web flanges15 ( fifteen) and 50mm ( fifty millimetre) fully knurled giving it high strength, hot dipped 2 (two) vibration management and long life with a backing 50mm (fifty millimetre) thick Rock wool @48kg ( forty eight kilogram ) density insulation intact with chicken mess wires. 600x1200x15mm ( six hundred into one thousand two hundred into fifteen millimetre) Magnetite pine wool tile with NRC 0.9-1 ( zero point - one) to be mechanically fastened on the G.I Studs. Then 12mm ( twelve millimetre) clip rail system are screw fixed on to the 12 mm ( twelve millimetre) galvanized steel With 120 ( one hundred twenty) GSM zinc coating specially designed for Acoustic MDF waterproof and Acoustics panel's. Then the Spandex is stretched over the clip rail system. The installed system should provide NRC OF 1.00 ( one) more details. The system to be installed on G.I studs 600x600mm ( six hundred into six hundred millimetre) centre to centre 2400mm X 50mm ( two thousand four hundred millimetre into fifty millimetre) web thickness 0.5mm,( zero point five millimetre) flanges 15 (fifteen) and 50mm ( fifty millimetre) fully knurled giving it high strength, hot dipped galvanized steel with 120 (one hundred twenty )GSM zinc coating specially designed for Acoustic vibration. Spandex colour as per Architect choice-Ref attached specifications for MAKE: Anakon /Responce /Armstrong upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 55 | Providing & fixing in position wall panelling at all heights of thickness 25 mm ( twenty five millimetre) with Fiber Glass Acoustical Wall Panels of size 300/450x1200 mm ( three hundred oblique four hundred fifty into one thousand two hundred millimetre) creda, resin bonded square edges having NRC of 0.9 ( zero point nine) minimum. The panels should be manufactured from high density bio-soluble resin bonded glass wool absorber having density of 96 Kgs/m3 ( ninety six kilogram per cubic metre) and wrapped on the front side with an acoustically transparent fabric having option of colours and fabric options like jute etcetera as per approved by architect/ Engineer-in-Charge, plain tissue backer and fabric wrapped hardened edges. Panels should have humidity resistance up to 90%, ( ninety percent) thermal conductivity ≤ 0.03 (m² k/w) thermal resistance ≥ 0.9 (m² k/w) & moisture rate ≤ 1% (JC/T670-2005).The panel should be fully recycled and fire retardant as per Class A. The installation comprises fixing of 6-8 mm ( six-eight millimetre) ply board surface on the existing surface to avoid any undulations. Surface impalers having projecting elements called spikes shall be fixed on the plain surface at 1200 mm ( one thousand two hundred millimetre) center to center horizontally and 600 mm ( six hundred millimetre) center to center vertically or as per approved by engineer-in-charge, using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall Panels shall be pierced through the spikes of the impalers ensuring line and level of panel are maintained. The panels should be mounted on the impalers horizontally or vertically as per the approved design or as per the directions of the engineer-in-charge. MAKE: Armstrong/Aero fiber/ Anakon upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 56 | Providing and fixing Acoustical fiber false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm ( one hundred twenty gram per sqaure metre) (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm ( twenty five millimetre) wide x 1.6 mm ( one point six millimetre) thick with flanges of 27 mm ( twenty seven millimetre) and 37mm ( thirty seven millimetre) , at 1200 mm ( one tousand two hundred millimetre) Centre to Centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm ( twelve point five millimetre into fifty millimetre) ) long with 6mm ( six millimetre) dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm ( twenty five into ten into zero point five millimetre) of required length with nuts and bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm ( forty five into fifteen into zero point nine millimetre) running at the spacing of 1200 mm ( one thousand two hundred millimetre) Centre to Centre, to which the ceiling section 0.5 mm( zero point five millimetre) thick bottom wedge of 80 mm ( eighty millimetre) with tapered flanges of 26 mm ( twenty six millimetre) each having lips of 10.5 mm ( ten point five millimetre) at 450 mm ( four hundred fifty millmetre) Centre to Centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm ( two point sixty four millimetre) dia x 230 mm ( two hundred thirty millimetre) long G.I. wire at every junction, including fixing perimeter channels 0.5 mm ( zero point five millimetre) thick 27 mm ( twenty seven millimetre) high having flanges of 20 mm ( twenty millimetre) and 30 mm ( thirty millimetre) long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm ( four hundred fifty millimetre) Centre, with 25mm ( twenty five millimetre) long drywall screws @ 230 mm ( two hundred thirty millimetre) interval, including fixing of 6mm ( six millimetre) thick ply to ceiling section and perimeter channel with the help of drywall screws of size 3.5 x 25 mm ( three point into twenty five millimetre) at 230 mm c/c ( two hundred thirty millimetre center to center) with final finish of Acoustical fiber fluted acoustical sheet as per approved shade MAKE: Anakon/Aero fiber/Aerocon upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 57 | Providing & Fixing of Glass Wool Acoustical Suspended Ceiling System utilizing 15mm ( fifteen millimetre) thick tiles installed on a 24mm ( twenty four millimetre) Plain T-Grid. The tiles should have Humidity Resistance (RH) of 95%,( ninety five percent) NRC 0.90 ( zero point nine zero), Colour Black, Light Reflectance >84% (eighty four percent) with Fire Resistance in module size of 595x595x 15 mm ( five hundred ninety five into ive hundred ninety five into fifteen millimetre) . The grid should be of 24mm ( twenty four millimetre) grid sections i.e. the Main Runner 3000mm ( three thousand millimetre) in 26 mm ( twenty six millimetre) web height, 1200 mm ( one thousand two hundred millimetre) and 600 mm ( six hundred millimetre) Cross Tees in web height of 24mm ( twenty four millimetre) with thickness 0.3mm ( zero point three millimetre) .Installtion to be comprise main runner spaced at 1200mm ( one thousand two hundred millimetre) centre securely fixed to the structural soffit using suspension system at 1200mm ( one thousand two hundred millimetre) maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm ( four hundred fifty millimetre) from the adjacent wall. Flush fitting 1200mm ( one thousand two hundred millimetre) long cross tees to be interlocked between main runners at 600mm ( six hundred millimetre) centre to form 1200 x 600 mm ( ( one thousand two hundred into six hundred millimetre) module. Cut cross tees longer than 600mm ( six hundred millimetre) require independent support. 600 x 600mm ( six hundred into six hundred millimetre) module to be formed by fitting 600mm ( six hundred millimetre) long flush fitting cross tees centrally between the 1200 mm ( one thousand two hundred millimetre) cross tees. Perimeter trim to be wall angles of size 3000x24x24mm, ( three thousand into twenty four into twenty four millimetre) secured to walls at Galvanized steel of size 27 x 37 x 25 x 1.6mm ( twenty seven into thirty seven into twenty five into one point six millimetre) and Level Clip in dimensions of 85x30x0.8mm ( eighty five into thirty into zero point eight millimetre) with 4.00 mm ( four millimetre) Gl wire. 450 mm ( four hundred fifty millimetre) maximum centres and as per the drawing and the work complete in all respects to the satisfaction of Engineer in-charge. Accessories consisting of HLC Sleeve Anchor Fasteners of thread size 6.5mm ( six point five millimetre) x 25/5 ( twenty five oblique five) with Soffit Cleat made of MAKE:-Armstron/USG Boral/ Anakon COLOR: BLACK upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 58 | Providing & Fixing of floor covering carpet roll having pile construction of tufted cut pile with composition of 100% ( one hundred percent) nylon, Flammability pass as per 16 CFR 1631#, smoke density ASTM E 662 less than 450 ( four hundred fifty), risilient primary backing of woven polypropylene, antistatic, anti skid property for commercial use, thickens 12mm ( twelve millimetre) (6+6) total and approximately pile weight of 850g/m2 ( eight hundred fifty gram per square metre) of roll form with total weight of 1500 g/m2, ( one thousand five hundred gram per square metre) roll length + roll width of 30mtrs/400cm, ( thirty metre oblique four hundred centimetre) primary backing of action black/felt back with ecoflex NXT, light fastness of >4 ( four) and sound insulation of DLW 28db,thermal resentence :0.9 sqm ( zero point nine) kw, installed over existing Cementitious flooring with gorilla epoxy glue, spinta colour series or equivalent colour complete as directed by engineer-in-charge. MAKE: Welspun/cover/Murti upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 59 | Providing and Fixing Acoustical Wooden Stage Flooring Compatible with Underground signal cabling and PopUp Boxes: Providing and fixing 65X18 ( sixty five into eighteen ) thick in random length, 2nd ( second) class teak wood planks flooring with tongue and groove joints on a layer of 15 mm ( fifteen millimetre) thick Engineering wood of approved make and manufacture, fixed to hardwood joint 45X 45mm ( forty five into forty five millimetre) at 600 mm c/c ( six hundred millimetre center to center ) in one direction resiliently supported on 100 x 100 mm ( one hundred into one hundred millimetre) Rubber Pads, the framework to be filled with 50mm ( fifty millimetre) thick Insulation Wool resin bonded insulation of density 24kg/cum.( twenty four kilogram per cubic metre ) (rate for flooring shall include providing additional framework required for housing microphone and power outlet junction - signal and Popup Stage boxes, If required providing and fixing 8mm ( eight millimetre) thick Engineering wood cover for the junction boxes work complete in all respect upto floor all level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, GST or other taxes imposed by the Government |
| 60 | SITC of Main Curtain with velvet curtain cloth with min 250 ( two hundred fifty) GSM,, horizontal sliding arrangement complete with galvanized, passivized modular curtain rails, mounting brackets, suitable for sliding arrangement &motorized operation complete with: single trolley, master trolley, tension and diverter pullies, 3mm steel wire rope, 1HP ( one hourse power) motor Crompton/Siemens/L&T), two numbers Micro switches for auto stop with min 1 ( one) year guarantee/warrantee or as per manufacturer. The curtain should be draped to half area when in closed position. Minimum overlap at centre should be 900mm ( nine hundred millimetre) and should be stitched in double gathering. SIZE - 20mtr X 7.8 mtr ( twenty metre into seven point eight metre) all complete. The Work Shall be executed as per drawings, Specification and instruction of Engineer in charge., MAKE: RESPONCE/NATIONAL/MURTI .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 61 | SITC of Middle Curtain cloth min 250 ( two hundred fifty) GSM with horizontal sliding arrangement complete with galvanized and passivized modular curtain rails 1 mtr. ( one metre) long, mounting brackets, sliding arrangement and motorized peration complete with single trolley, master trolley, tension and diverter pullies, 3mm steel wire rope, 1HP ( one hourse power) motor Crompton/ Siemens /Havells), two number Micro switches for auto stop. Minimum overlap at center should be 600mm and should be stitched in double gathering. SIZE-20mtr.x7.8.0mtr ( twenty metre into seven point eight metre) all complete. The Work Shall be executed as per drawings, Specification and instruction of engineer in charge.MAKE: RESPONCE/NATIONAL/MURTI .The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 62 | SITC of Rear Curtain cloth min 250 ( two hundred fifty) GSM with horizontal sliding arrangement complete with galvanized and passivized modular curtain rails 1 mtr. ( one metre) long, mounting brackets, sliding arrangement and motorized peration complete with single trolley, master trolley, tension and diverter pullies, 3mm steel wire rope, 1HP( one hourse power) motor Crompton/Siemens/Havells), two number Micro switches for auto stop. Minimum overlap at center should be 600mm ( six hundred millimetre) and should be stitched in double gathering. SIZE-20mtr.x7.8.0mtr ( twenty metre into seven point eight metre) all complete. The Work Shall be executed as per drawings, Specification & instruction of engineer in charge. MAKE:RESPONCE/ NATIONAL/MURTI. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 63 | SITC Of Main Frill with Suspended from 25 ( twenty five) OD MS Pipe frill to be made out of the same Fabric as that of Main Curtain. Frill shall be pleated and stitched in double gathering. Frill to be 600 mm ( six hundred millimetre) below the proscenium. Approximate Size:20Mx1m ( twenty metre into one metre) .approx of at age size complete. The Work Shall be executed as per drawings, Specification and instruction of Engineer-in-Charge, MAKE RESPONCE/NATIONAL/MURTI. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 64 | SITC Of Middle Frill with Suspended from 25 ( twenty five) OD MS Pipe, Frill to be made out of the same Fabric as that of Main Curtain. Frill shall be pleated and stitched in double gathering. Frill to be 600 mm six hundred millimetre) below the proscenium. Approximate Size: 20Mx1m. ( twenty metre into one metre) approx of at age size complete. The Work Shall be executed as per drawings, Specification and instruction of Engineer-in-Charge, RESPONCE/NATIONAL/MURTI. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 65 | SITC Of Rear Frill with Suspended from 25 ( twenty five) OD MS Pipe. Frill to be made out of the same Fabric as that of Main Curtain. Frill shall be pleated and stitched in double gathering. Frill to be 600 mm (six hundred millimetre) below the proscenium. Approximate Size : 20Mx1m ( twenty metre into one metre) approx of at age size complete. The Work Shall be executed as per drawings, Specification and instruction of engineer-in-charge, RESPONCE/NATIONAL/MURTI The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 66 | SITC of Side wings 25MMX50MMX1.6MM ( twenty five millimetre into fifty millimetre into one point six milletre) rectangular tube and 6mm ( six millimetre ) wood ply fixed on frame one side and after black glazed grade cotton cloth fixed, hang from ceiling by M S Pipe frame Size 1.2Mx 6.5 M ( one point two metre into six point five metre) approx. The Work Shall be executed as per drawings, Specification and instruction of engineer-in-charge, MAKE: CUSTOM. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 67 | SITC of Stage Curtain Control system Panel, of make Bharat Stage Service (BSS) lighting or equivalent, comprising of Electrical Contractor and protection MCB's for dual control of main, center, Set Bars motor, Controls for Up/Down movement of curtains Panel should have incoming protection 4 ( four) pole MCB, phase indicating pilot lights, etcetera It is to be fabricated from 1.6mm ( one point six millimetre) sheet steel, wall mounting type, cable entry from top and/or bottom etc. with min 1( one) year guarantee/warranty Complete with Remote Control options from Stage as well as Control Center. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 68 | Providing and fixing of Stage Proscenium to be fabricated on site made top side with 50x50mm ( fifty into fifty millimetre) MS square pipe. 50 mm ( fifty millimetre) Rockwool of density 32kg/m3 ( thirty two kilogram per cubic metre) to be fixed inside the framework. Fixing on 12 mm ( twelve millimetre) waterfroof ply on the framework finishing with 3.5mm ( thre point five millimetre) teak veneer. Ply and teak veneer to be pasted on both sides of the Proscenium. Entire work to be done complete as per drawings, specifications and direction of Engineer in Charge and Consultant including wax polishing of Teak veneer after filling wood filler and sand papering up to smooth finish in natural colour. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 69 | Providing and applying POP over plaster including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals in pattern finish approved by the Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government . |
| 70 | Providing and fixing Fully Insulated Non Metallic Wooden Acoustical door at all levels. Wooden Acoustic door should carry 120 ( one hundred twenty ) minutes Insulation properties. Main Door frame shall be Single rebate profile of section 120 x 70 mm ( one hundred twenty into seventy millimetre) made out of Hard wood - Red meranti / Ivory Coast (2nd class) as per requirement with factory made groove of suitable size. The frame must be primed with Fire retardant primer. Wooden shutter must be of minimum 52mm ( fifty two millimetre) of thickness finished with commercial ply on both faces. The commercial ply must be finished with Fire retardant primer. The Commercial ply may also be pasted with Laminate in desired shade (payable in extra item). The composite thickness of the core insulation will be 44mm ( forty four millimetre) consists of Anakon tough block boards and treated wool Insulation material. The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm ( twenty millimetre into four millimetre) mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping. All hardware's, Fasteners and FR Glass shall be payable in Extra item. Door shutter provided with commercial ply on both faces with 1mm ( one millimetre) Thick Regular SF grade Factory pasted Laminate on both faces and Main frame made out of hardwood frame. Frame primed with Fire retardant primer. FIXTURES OF DOORS: (A) Supply and fixing of SS Ball Bearing Hinges of size 100 x 75 x 3mm ( one hundred into seventy five into three millimetre) complete with SS Screws of BB1953 Becker Fire Solutions 4 Nos ( four numbers per panel), (B) Supply and fixing of anchor fasteners of M10X120mm ( ten into one hundred twenty millimetre) length. (C) Supply and fixing of door closers of BLC-604 TS-89 (Except shaft door). (D) Supply and fixing of Stainless Tower Bolt 300mm ( three hundred millimetre) Long for Double leaf door of height up to 2100mm ( two thousand one hundred millimetre) with necessary screws as required. (E) Supply and fixing of Stainless Tower Bolt 600mm ( six hundred millimetre) Long for Double leaf door of height up to 2400mm ( two thousand four hundred millimetre) with necessary screws as required. (F) Supply and Filling the gap between wall & Door frame by using silicone sealant and Wooll insulation on both side of the door. MAKE: ANAKON/NAVAIR/MAHABIR. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government . |
| 71 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 ( with make of Supreme , Finolex or its equivalent ) leaving 10 mm ( ten millimetre) gap for thermal expansion, (i) Single socketed pipes 300mm ( three hundred millimetre) diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 72 | Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC (D-Plast) accessories for Rain water pipes. ( with make of Supreme , Finolex or its equivalent ) PVC Plain bend including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 73 | Providing and Fixing 15 mm ( fifteen millimetre) thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm ( five hundred ninety five into five hundred ninety fivemillimetre) in true horizontal level, suspended on inter locking metal grid ( ARMSTRONG , SAINT GOBAIN or its Equivalent ) of hot dipped galvanised steel sections (galvanising @ 120 ( one hundred twenty ) grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm ( twenty four into thirty eight millimetre) made from 0.33 mm ( zero point three three millimetre ) thick (minimum) sheet, spaced 1200 mm ( one thousand two hundred millimetre) centre to centre, and cross “T” of size 24x28 mm ( twenty four into twenty eight millimetre) made out of 0.33 mm ( zero point three three millimetre) (Minimum) sheet, 1200 mm one thousand two hundred millimetre) long spaced between main’T’ at 600 mm ( six hundred millimetre) centre to centre to form a grid of 1200x600 mm ( one thousand two hundred into six hundred millimetre) and secondary cross ‘T’ of length 600 mm ( six hundred millimetre) and size 24 x28 mm ( twenty four into twenty eight millimetre) made of 0.33 mm ( zero point three three millimetre) thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm one thousand two hundred into six hundred millimetre) panel to from grid of size 600x600 mm ( six hundred into six hundred millimetre) , resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm ( twenty four into twenty four into three thousand millimetre) made of 0.40 mm ( zero point four zero millimetre) thick (minimum) sheet with the help of rawl plugs at 450 mm ( four hundred fifty millimetre) centre to centre with 25 mm ( twenty five millimetre ) long dry wall screws @ 230 mm ( two hundred thirty millimetre) interval and laying 15 mm ( fifteen millimetre) thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm ( twenty five into thirty five into one point six millimetre) fixed to ceiling with 12.5 mm ( twelve point five millimetre) dia and 50 mm ( fifty millimetre) long dash fasteners, 4 mm ( four millimetre) G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm,( eighty five into thirty into zero point eight millimetre) spaced at 1200 mm ( one thousand two hundred millimetre) centre to centre along main ‘T’, bottom exposed with 24 mm ( twenty four millimetre) of all T sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. 600X600 ( six hundred into six hundred ) SS metal grid ceiling ( ARM STRONG) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 74 | Providing and fixing plywood 4 mm ( four millimetre) thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with : Decorative veneer facings of approved manufacture ( Make of Centuryply , Greenply or its equivalent ) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 75 | Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm ( five hundred ninety five into five hundred ninety five millimetre) of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 ( zero point five zero) (minimum) as per IS 8225:1987 ( make of Aerolite , ecepro or its equivalent ), Light reflectance of 85% ( eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, ( one hundred percent) thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm ( zero point three three millimetre) thick (galvanized @ 120 ( one hundred twenty) grams per sqm including both sides) comprising of mainT runners of size 24x38 mm ( twenty four into thirty eight ) of length 3000 mm,( threethusand millimetre) cross - T of size 24x32 mm ( twenty four into thirty two millimetre) of length 1200 mm ( one thousand two hundred millimetre) and secondary intermediate cross-T of size 24x32 mm ( twenty four into thirty two millimetre) of length 600mm ( six hundred millimetre) to form grid module of size 600 x 600 mm ( six hundred into six hundred millimetre) , suspended from ceiling using galvanised mild steel items (galvanizing @ 80 ( eighty) grams per sqm) i.e. 50 mm ( fifty millimetre) long, 8 mm ( eight millimetre) outer diameter M-6 dash fasteners, 6 mm ( six millimetre) dia fully threaded hanger rod upto 1000 mm ( one thousand millimetre) length and L-shape level adjuster of size 85x25x25x2 mm ( eighty five into twenty five into twenty five into two millimetre) Galvanised iron perimeter wall angle of size 24x24x0.40 mm ( twenty four into twenty four into zero point four zero millimetre) of length 3000 mm ( three thousand millimetre) to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm ( four hundred fifty millimetre) center to center and 40 mm ( forty millimetre) long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 8 mm ( eight millimetre) thick tegular edged light weight calcium silicate false ceiling tiles including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 76 | Providing and fixing false ceiling at all heights with integral densified ACOUSTIC fLUTED WOODEN PANEL FALL CEILING ( Make of UNIDUS , TRANQUIL , ECHSORBIX OR ITS EQUIVALENT ) reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm ( five hundred ninety five into five hundred ninety five millimetre) of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 ( zero point fifty) (minimum) as per IS 8225:1987, Light reflectance of 85% ( eighty five percent) (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%,( one hundred percent) thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm ( zero point thirty three) thick (galvanized @ 120 ( one hundred twenty) grams per sqm including both sides) comprising of mainT runners of size 24x38 mm ( twenty four into thirty eight millimetre) of length 3000 mm,( three thousand millimetre) cross - T of size 24x32 mm ( twenty four into thirty two millimetre) of length 1200 mm ( one thousand two hundred millimetre) and secondary intermediate cross-T of size 24x32 mm ( twenty four into thirty two millimetre) of length 600mm ( six hundred millimetre) to form grid module of size 600 x 600 mm, ( six hundred into six hundred millimetre) suspended from ceiling using galvanised mild steel items (galvanizing @ 80 ( eighty) grams per sqm) i.e. 50 mm ( fifty millimetre) long, 8 mm ( eight millimetre) outer diameter M-6 dash fasteners, 6 mm ( six millimetre) dia fully threaded hanger rod upto 1000 mm ( one thousand millimetre) length and L-shape level adjuster of size 85x25x25x2 mm.( eighty five into twenty five into twenty five into two millimetre) Galvanised iron perimeter wall angle of size 24x24x0.40 mm ( twenty four into twenty four into zero point four zero millimetre) of length 3000 mm ( three thousand millimetre) to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm ( four hundred fifty millimetre) center to center and 40 mm ( forty millimetre) long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.With 8 mm ( eight millimetre) thick tegular edged light weight calcium silicate false ceiling tiles including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 77 | Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm ( five hundred ninety five into five hundred ninety five millimetre) of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85% ( eighty five percent) , Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7) in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm ( zero point three three millimetre) thick (galvanized @120 gsm ( one hundred twenty gram) ) comprising of main T runners of 15x32 mm ( fifteen into thirty millimetre) of length 3000 mm, ( three thousand) cross T of size 15x32mm ( fifteen into thirty two millimetre) of length 1200 mm ( one thousand two hundred millimetre) and secondary intermediate cross T of size 15x32 mm ( fifteen into thirty two millimetre) of length 600 mm ( six hundred millimetre) to form grid module of size 600x600 mm ( six hundred into six hundred millimetre) suspended from ceiling using galvanized mild steel item ( ARMSTRONG , SAINT GOBAIN or its Equivalent ) (galvanised@80gsm) ( eighty gram) 50 mm ( fifty millimetre) long 8mm ( eight millimetre) outer diameter M-6 dash fasteners, 6 mm ( thirty millimetre) diameter fully threaded hanger rod up to 1000 mm ( one thousand millimetre) length and L-shape level adjuster of size 85x25x2 mm,( eighty five into twenty five into two millimetre) spaced at 1200 mm ( one thousand two hundred millimetre) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm ( twenty four into twenty four into three thoussand millimetre) made of 0.40 mm ( zero point four zero millimetre) thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm ( four hundred fifty millimetre) centre to centre and 40 mm ( forty millimetre) long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge.With 16 mm ( sixteen millimetre) thick beveled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6) 600 x600x24mm Grid ( Six hundred into six hundred into twenty four millimatre) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 78 | Providing and fixing specified wood frame work consisting of battens 40x40 mm ( forty into forty millimetre) fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete seasoned and chemically treated hollock wood including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 79 | Providing and fixing flat pressed 3 ( three) layer particle board High density exterior grade (Grade I) or graded wood particle board IS : 3087 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): 12 mm ( twenlve millimetre) thick including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
