|
| 1 | Providing & Fixing of 1200 mm sweep BLDC technology power saving ceiling fan which can withstand on votage fluctuations from 140 volts to 240 volts ,power factor not less then 0.9 , service value (CMM/W) minimun 6.85 , air delivery minimun 220 CMM, speed 350 RPM ( tolerance as per IS:374 2019 ) THD less then 10% and complete with down rod of 15 mm dia. ERW (Electrical resistance welded ) of 1.6mm nominal thick medium duty steel pipe up to 80 cm , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR .Without Remote ( PWD Electrical BSR 2022 ch E-15 item no 15.4.1) |
| 2 | Supply , Installation, Testing and Comissioning of Inverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and 50 hz , single phase AC supply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR 1.5 TR ISEER not less then 3.8 . ( PWD Electrical BSR 2022 ch E-22 item no 22.24.3) |
| 3 | Providing and fixing Superior quality CP Brass fittings of approved make as per direction of Engineer-in-charge |
| 4 | Wall mixer 3 in 1 system with provision of tetephonic bath shower with bend pipe ( PWD BSR 2022 ch S-2 item no 2.33.13) |
| 5 | Revolving type towel ring ( PWD BSR 2022 ch S-2 item no 2.33.15) |
| 6 | P & F Mixing Range (15mm) C.P. sink mixer With casted spout. ( PWD BSR 2022 ch S-2 item no 2.21.4) |
| 7 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) ( PWD BSR 2022 ch S-2 item no 2.38.2) |
| 8 | Complete replacement of Tapestry cloth of Sofa set costing @ Rs. 300/- per Mtr. Approx of superior quality including stitching charges (As approved by the Engineer in Charge) as per existing pattern/design. |
| 9 | Single seater sofa ( PWD BSR 2022 Ch B-17 item 17.28.1) |
| 10 | Three seater sofa ( PWD BSR 2022 Ch B-17 item 17.28.1) |
| 11 | Complete replacement of Tapestry cloth of Sofa set costing @ Rs. 300/- per Mtr. Approx of superior quality including stitching charges (As approved by the Engineer in Charge) as per existing pattern/design. |
| 12 | Single seater sofa ( PWD BSR 2022 Ch B-17 item 17.29.1) |
| 13 | Three seater sofa ( PWD BSR 2022 Ch B-17 item 17.29.1) |
| 14 | S& F of all in one solar LED street light fixture with Integrated high efficient Monocrystalline panel with Lithium (LiFePO4) Ferro Phosphate battery with BIS approved make .luminaire should be secondary optic lenses for better distribution with delivered efficacy of > 100 Lumen perwatt.Bidder shall have in house R&D Laboratory which is recognised by ministry of Science & Technology department, Govt. Of India/ NABL. Bidder shall have inhouse pole & luminaire manufacturing facility. Luminaire can be supplied with Hybrid switch along with indicator to understand the source of power( either from solar or AC supply).shall have certificate tested fromMNRE approved Lab. Guarantee for total system is two years .Note: All the above should be integrated and should be 1 system. make: Bajaj/ Philips / Crompton. Compact Solar LED Street Light - 20W(MONO) 18V/ 12.8V9Ah/12W (RUIDP BSR 2022 Chapter 18 item E181901) |
| 15 | Supply and erection of M S swaged tubular pole conforming to IS: 2713-1980 (part I to II) with galvanised base plate in position including excavation of the pit and filling the same with C.C. of M-20 grade (1:1.5:3) from base plate to 50 cm above ground level, with the help of steel frame not less than 40 cm dia up to 114.3mm outer dia and 50 cm beyond 114.3mm outer dia around the pole. Duly finished with cement plaster, earthing terminals , cable entry, GI cable sleeve complete as required. The pole shall be fabricated by using ISI mark tube for structural purpose of following height and designation. ( See Table E - 09 for specs. )202301 7.5 Mtr. ( 410 SP - 5 ) Group - 1 (PWD Electrical BSR Chapter 20 item 202301.2 ) |
| 16 | Providing and fixing curtain rods of 1.25 mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete: 20 mm ( PWD BSR 2022 Ch B-8 item 8.25.2) |
| 17 | Providing and fixing IS : 3564 marked Aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc. complete. ( PWD BSR 2022 Ch B-8 item 8.25.2) |
| 18 | Providing and fixing Almirah lock (50 to 70 mm size )of approved make without pair of handles for door with necessary screws etc complete as per direction of Engineer-in-charge. ( PWD BSR 2022 Ch B-8 item 8.33) |
| 19 | P & F Bevelled edge Mirror/mirror with teak wood lipping around of special glass of approved make as per direction of Engineer-in-charge complete with 6mm thick commercial plybase fixed to wooden screws & washers. Size 600 x 450mm x 4 mm thick ( PWD BSR 2022 Ch S-1 item 1.44.1) |
| 20 | SITC of battery bank comprising SMF/VRLA batteries, interconnection wiring etc. as required complete in all respect. 12 V 100 Ah (RUIDP BSR 2022 Chapter 47 item 47.3.39.4) |
| 21 | Painting of desert cooler with two coats of rubber paint inside of water tank and two coat of synthetic enamelled paint on both side of cooler body, fan body, grills etc.after cleaning with sand paper, complete in all respect as required. ( PWD Electrical BSR 2022 ch E-26 item no 26.16) |
| 22 | Replacement of cooler pads (heavy) set of 3 no. of size 25\\" x 27\\" ( PWD Electrical BSR 2022 ch E-26 item no 26.17) |
| 23 | P & F of ISI marked vertical pump suitable for 20\\" desert cooler including making connection testing etc. as required.ISI marked vertical pump ( PWD Electrical BSR 2022 ch E-26 item no 26.29.1) |
| 24 | P & F fan motor suitable for 20\\" desert cooler including making connection testing etc. as required.with copper winding Motor ISI Marked ( PWD Electrical BSR 2022 ch E-26 item no 26.32.1) |
| 25 | Rewinding of motor of desert cooler fan with super enamelled copper wire, 'E ' class insulation material including removing,refixing,testing etc. as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. ( PWD Electrical BSR 2022 ch E-26 item no 26.38) |
| 26 | P & Replacement of condensing/ cooling coil of copper fins for following capacity A.C./ Water cooler/ Fridge as required. Replacement of material or components shall be use as per guidelines of OEM of original product. All the scrap material should be retained by the contractor. |
| 27 | 200/210 Ltr Refrigerator ( PWD Electrical BSR 2022 ch E-26 item no 26.44.8) |
| 28 | 1.0 TR A.C. ( PWD Electrical BSR 2022 ch E-26 item no 26.44.1) |
| 29 | Servicing of 1.0/1.5/2.0 TR capacity Split/ Window type air conditioner ( PWD Electrical BSR 2022 ch E-26 item no 26.45) Please Enable Macros to View BoQ information |
