|
| 1 | Amma unavagam |
| 2 | Removing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation anheights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is –63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification asdirected by the departmental officer |
| 3 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 4 | Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 5 | Dismantling damaged Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs as instructed by departmental officers |
| 6 | Supplying and fixing in positionPolished Shahabad Stone Slabs of 20mm thick with Machine Cut Edges of size 2'0 x 2'0 and above20mm thick in cement mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with same colour of cement etc., complete as per standard specification |
| 7 | Paving the floor with pre-polished Concrete Anti-Skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One part of Cement and Three part of Plastering Sand (P- Sand)), 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg/sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 8 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. |
| 9 | Supplyand fixingof 1200mm(48\\") sweep AC ceiling fan complete with step ped electronic 300 W regulator with 1 metre down rod with fan clamp with side plates and cross arm of size 450mm (18\\") |
| 10 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 liters capacity PVC / 12.5 liters capacity porcelain low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition, etc., complete complying with standard specifications. (The EWC and flushing tank with all accessories should be got approved by the Executive Engineer before use on works) Floor Fitting. |
| 11 | Supply and Delivery of Philips 1000 Watt Powerful Mixer Grinder - HL7703/00 as per standard specification including cost of material & conveyence to specified location |
| 12 | Supply and Delivery and fixing of Reverse Osmosis based Point of Use Water Treatment System for Drinking Purposes (V3) as per IS 16240 ( Reverse Osmosis based Point of Use Water Treatment System for Drinking Purposes (V3) as per IS 16240 Countertop/Wall Mount 20 Filtration capacity (In LPH)-20 and above,Guaranteed output water quality As per IS 10500 or better Storage Tank Material -ABS/PP Food Grade,Capacity (in Ltr) 4 Liters and above,Feed Water TDS (ppm) at which the machine LPH and Guaranteed output water quality is ensured upto 1500,Aesthetically designed, self contained RO water purification system having all the necessary components such as pressure pump, filters, water tank, suitable hot / cold / normal water dispensing arrangement, control system etc as applicable to provide safe drinking water as per IS 10500 |
| 13 | Supply and Delivery Aluminium Biryani Handi Multipurpose Heavy Aluminium Cooking Vessel Big size Utensils /Cookware/kadai/dabbara 12.15 INCH(Sliver) as per standard and as instructed by departmental officers |
| 14 | Supply of Stainless Steel 25 Liters Casserole Hotpot with 12 hrs Insulation Hot & Cold For Canteen And Hotels as instructed by depatmental officers |
| 15 | Maintanence and Repair of Commercial kitchen steam Gas Fired Stainless Steel Kitchen Cooking Steam Boiler (idly boiler) as instructed by depatmental officers |
| 16 | Supply of Stainless Steel CLASSIC ESSENTIALS Stainless Steel Preforated (Turner) Spatulas For Canteen And Hotels as instructed by depatmental officers |
| 17 | Supply of Tumbler Stainless Steel Utensil For drinking purpose at Canteen And Hotels as instructed by depatmental officers |
| 18 | Supply of Iron Kadhai 20 Litre Material of Kadhai Iron Material of Handal Core Iron Material of insulated handle cover NA Shape of Kadhai round at Canteen And Hotels as instructed by depatmental officers |
| 19 | Supply of Stainless Steel 304 - Shape of Plate- Round Type,Plain Number of Compartment in Partition plate Select NA , in case plate type is plain NA Maximum Length/Diameter of plate (in mm) 221-260 Maximum Width/Diameter of plate (in mm)221-260 at Canteen And Hotels as instructed by depatmental officers |
| 20 | Providing & fixing PVC RAIN WATER DOWNFALL PIPE of the following dia with necessary T.W.Clamps Plugs, Shoes,Bemds, other clamps, screws nails etc.,complete complying with standard specification. The rate is inclusive of cost of removable iron gratings of appropriate size. The size of Teak Wood plugs used is 150X25mm in front & 200x75mm in rear (wall side) with a depth of 110mm. The pipe is to be fixed by means of \\"U\\" clamps at the centre of pipes to be fixed.110mm dia PVC Pipe [4 Kg/SqCm] |
| 21 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 22 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 23 | Provision for GST 18% Please Enable Macros to View BoQ information |
