|
| 1 | B/R PORTION:Demolition of brick work built in cement mortar including all quions arches, pillar etc all as specified and directed. |
| 2 | Material and labour for brick work with Fly Ash bricks of class designation 75kgf/sqcm, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified & directed |
| 3 | Material & labour Fly Ash Brickwork having class designation 75kgf/sqcm, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 etc complete all as specified and directed . |
| 4 | Taking down Cement plaster on brick or stone walls incl raking out joints hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 5 | M&L for Rendering 10mm thick on fair faces of wall surface of any description of brick work or concrete surfaces, finished even and smooth (without using extra cement) in cement mortar (1:6), complete all as specified. |
| 6 | Rendering 15mm thick on other than fair faces of wall brick work or concrete surfaces, finished even and fair in cement mortar (1:4), using water proofing compound complete all as specified. NOTE:WPC will be measured and paid for separately. |
| 7 | M&L for 10mm thick plaster on ceiling or sides/ bottom of RCC surfaces in CM 1:3 & finished even and smooth (without using extra cement) all as specified and directed. |
| 8 | M&L for washed stone grit plaster on exterior walls in two layers ,under layer 12mm cement plaster 1:4 (1 cement & 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on under layer @ 3 kg of cement per sqm , top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size ) in panels with groove all around as per approved pattern including scrubbing and washing , the top layer with brushes and water to expose the stone chippings complete all as specified and directed. |
| 9 | Supply only integral water proofing comound ISI Marked complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surface of walls & applicataion of two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance , dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over & including priming coat of exterior primer applied @2.20kg/10 Sqm complete all as specified & directed |
| 11 | M&L for preparation of old plastered surface of walls including removal of existing treatment & applicataion of two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance , dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @1.43 lit/10 sqm over & including priming coat of exterior primer applied @2.20kg/10 Sqm complete all as specified & directed |
| 12 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound with hand roller ,over a coat of alkaline resistant primer over a coat of wall care putty 1mm thick surface complete all as specified and directed. |
| 13 | Material and labour for complete removal of existing treatment on surface of walls by using appropriate technique as approved by Engineer-in-Charge for complete removal of all layers of treatment and reaching upto old plastered surface and applying a coat of wall care putty not less than 1mm thick as per manufacture instructions and applying two coats of oil emulsion paint over a coat of alkaline resistant primer complete all as specified and directed. |
| 14 | M&L for preparation of new plastered surfaces of ceiling and applying two coats of oil bound with hand roller ,over a coat of alkaline resistant primer over a coat of birla wall care putty surface complete all as specified and directed. |
| 15 | Demolition of Cement Concrete any description and in any positionnot otherwise specifically provided complete all as specified and directed. |
| 16 | Material and labour for 50 mm thick PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in plinth protection finished fair and even smooth without using extra cement complete all as specified. Note:- The plinth protection shall be laid in panels and lenth of each panel shall not be more than 2.00 m all as directed . |
| 17 | Material and labour for 75mm PCC type D-2 1:4:8 (using 40mm graded stone aggregate) as in sub base flooring complete all as specified and directed. |
| 18 | Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and directed. |
| 19 | Supply and fixing of heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortor (1:4) bed, all as specified and directed. |
| 20 | Material and labour for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick cement mortar (1:4) and jointed with grey cement slurry @ 3 Kg/Sqm, and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding, polishing, rounding and moulding of stone slabs on edges, etc including cement mortar bedding and rubbish off the premises complete all as specified and directed. |
| 21 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified. |
| 22 | Material and labour for premium quality, coloured, joint free, non skid coloured ceramic tiles, area of each tile exc 0.11 sqm but not exceeding 0.18 sqm, 7 to 8 mm thick as in floor, set and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or layer in cement mortar (1:4) complete all as specified and directed. |
| 23 | All as per item No. 22 above but on vertical face of wall in skirting over 10mm thick screed bed in cement mortar 1:4 complete all as specified & as directed |
| 24 | Material and labour for premium quality coloured glazed ceramic tiles ( 450 x 300 x 7 mm thick) and jointed in neat cement slurry @ 3.00 kg/square metre and pointed in white or coloured cement to match including rendering 10 mm thick in cement plaster 1:4 as in vertical surfaces complete all as specified and directed. |
| 25 | Taking down chowkaths or frames n.exc 1.5 sqm (without taking off shutter from the frame) each and removing from the site complete all as specified and directed. |
| 26 | Taking down chowkaths or frames exc 1.5 sqm but n exc 4.0 Sqm (without taking off shutter from the frame) each and removing from the site including dismantling brick work for hold fasts etc complete all as specified and directed. |
| 27 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. Note: Material Test Certificate & Authentication should be provided by the manufacturing company complete all as specified and directed. |
| 28 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50x100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made. Note: Material Test Certificate & Authentication should be provided by the manufacturing company complete all as specified and directed. |
| 29 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) complete all as specified and directed. Note: Material Test Certificate & Authentication should be provided by the manufacturing company complete all as specified and directed. |
| 30 | Providing 30 mm thick Factory Made 100% Solid WPC ( Wood polymer Composite ) gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. rate inslusive for Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and directed. Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 31 | S&F of windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2 Nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. (Make: A2Z Infra Solutions/ Elixir Metform Pvt Ltd./ Lakshmi Fabrications) |
| 32 | S&F Providing & fixing of ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitable provision as in ventilator in toilet/bathroom/staircase (Make: A2Z Infra Solutions/ Elixir Metform Pvt Ltd./ Lakshmi Fabrications) all as specified and directed. |
| 33 | Supply & fixing of stainless steel butt hinges 100 mm long medium weight complete all as specified & directed. |
| 34 | S&F 150 mm long Aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified & directed. |
| 35 | Supply & fixing aluminium anodised extruded fabricated type handle 150 mm long complete all as specified & directed. |
| 36 | Supply & fixing Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) 300 mm long and fixing with bolts extruded sections complete all as specified & directed. |
| 37 | Supply and fixing of mild steel 300 mm, helical door spring with roller plate for door shutter including welding if necessary fixed in repair complete all as specified and directed. |
| 38 | Supply and fixing of floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 150mm complete all as specified and as directed. |
| 39 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engineer-in-charge. |
| 40 | Supply & fixing Mild Steel Framed work such as Guard Bar/grill welded to window frame or fixed independantlys, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks, cooler stand and similar work conforming to Fe.290.Gde-E-165 complete all as specified & directed. |
| 41 | Mild steel plain black sheet 1.25 mm th in steel gates and similar work all as specifide and as directed |
| 42 | Material & labour for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed by Engr-in-charge |
| 43 | S & F in repair stainless steel curtain rod 25mm dia having wall thickness 1.6mm fixed with and including stainless steel decorative brackets, two end caps for each rod length at both end etc as in repair complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | M & L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed. Note : Quantity will be measured perimeter of wall x depth of penetration. |
| 45 | Taking up or down steel tubing and connections of 15mm bore in pipe, including cleaning for re-fixing or removal from site all as specified and directed.Note: Cutting chases shall be measured & paid separately |
| 46 | Taking up or down steel tubing and connections of 20mm bore in pipe, including cleaning for re-fixing or removal from siteall as specified and directed.Note: Cutting chases shall be measured & paid separately |
| 47 | Supplying and laying of CPVC pipes 20mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 48 | Supplying and laying of CPVC pipes 16mm OD SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified |
| 49 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends of edges of landings, steps, cills etc., and cutting chases for concealed water tubing and making good all as specified and directed. |
| 50 | Supply & fixed in repairs vitreous China squatting pan of “Orissa Pattern” of size 580x440mm coloured with integral footrest complete including making good floors complete all as specified. |
| 51 | Supply and fixed in repair vitreous china wash hand basin white flat back of size 550x400mm including CI brackets and padastal , chromium plated waste coupling, waste pipe etc.,complete all as specified. (incl all waste fittings) |
| 52 | Supply and fixing pillars taps fancy type chromium plated cast copper alloy 'Hot and Cold\\"with capston head long screwed shanks of 15mm bore compete all as specified. |
| 53 | S&F in repair 10 ltr capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, 32 mm dia flush pipe all as specified and directed. |
| 54 | S&F in repair Bib tap, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, suitable for 15 mm bore pipe, complete all as specified and directed. |
| 55 | Supply & fixed in repairs doom l grating openable 100mm PTMT size with/without hole including fixing with white cement complete all as specified and directed. |
| 56 | Supply and fixing in repair Stop valves, cast copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore complete all as specified and directed . |
| 57 | Supply and fixing in repair 20mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed all as specified and directed . |
| 58 | Supply and fixing in repair 15 mm bore Gun-Metal, globe or gate valves , with iron wheel head,screwed down both end for iron pipe and fixed all as specified and directed . |
| 59 | Supply and fixing of water storage tank of 500 ltr capacity, HDPE triple layer, cylindrical, vertical with closed top and FDA approved, 100% UA stabilized, rust proof, ISI marked, fixed and hoisted in position on staging or roof complete with locking arrangement including over flow pipe, air lock pipe, brass valve 20 mm high pressure with polythene float and flynut, ISI marked, screwed and suitable for iron pipe 20 mm bore including taking down of old tank of any descrption and removal from site complete all as specified and directed. Note:- Tank shall be white and make of tank shall be engraved on the tank. |
| 60 | S&F in repair 600x450 mm size bevelled edge looking mirror of selected quality glass mounted on 12mm thick marine plywood with powder coated aluminium frame alround and fixed with wooden plugs, CP screws, cup and washers all as specified and directed. |
| 61 | Supply & Fix in repair Soap dish any type, fixed to plugs with chromium plated brass screws all as specified and directed. |
| 62 | S & F in repair chromium plated, towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed. |
| 63 | S & F in repair Swievel, Shower rose of PTMT any colour 15mm size with 195 mm long arm wiyh bend of 45 degree all as specified and directed. |
| 64 | S&F in repair angle cock of 15mm pipe connection complete all as specified and directed. |
| 65 | S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 66 | M&L for 75mm dia PVC (SWR) vent cowl complete all as specified and directed |
| 67 | S&F for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including dismantling of existing AC pipes of any description any length complete all as specified and as directed.. |
| 68 | Supply and fixing PVC (SWR) 75 mm pipe type A single socket in any length with rubber ring joints laid in floors or trenches including dismantling of existing pipes of any description any length complete all as specified and as directed. |
| 69 | Supply and fixing of PVC (SWR) bends 110 mm bore complete all as specified and as directed. |
| 70 | Supply and fixing of PVC (SWR) bends 75 mm bore complete all as specified and as directed. |
| 71 | Supply and fixing in repair of PVC (SWR) floor trap, plain with grating including jointing with solvent cement of outer dia metre outlet of 75 mm complete all as specified and directed. |
| 72 | Demolition and breaking up 100 mm bore drain pipes (salt glazed stone ware pipes) set in cement mortar complete all as specified. |
| 73 | M&L for Concrete bed to drain pipes of 100mm bore including packing under and hauching against the sides of pipes after they are laid and tested in PCC 1:3:6 type C2 complete all as specified |
| 74 | S&F for 110mm bore, PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches complete all as specified. |
| 75 | M&L for salt-glazed stoneware gully traps,150x150 square or round mouthed, type \\"P\\" setting and jointing to drains with cm 1:1 all as specified and directed. |
| 76 | Supply and fixing in repair of stainless steel sink with drainage board 1.00 mm thick, ISI marked for kitchen with plug, washers and wastes, including bedding in cement mortar on to dwarf wall or fixing contilever brackets of suitable angle iron, CP brass waste coupling, superior quality PVC waste pipe and connecting union to pipe, over all size 915mm x460mm, bowl size 410mm x 330mm x160mm complete all as specified and directed. |
| 77 | Stainless steel plate rack standard size 1000mm x 750mm mm of wt not less than 8kg each complete and fixing with rawl plug and steel screws including taking down old plate rack of any size where exist , complete all as specified and directed . |
| 78 | Demolition of RCC n exc 15cm thick in any position complete all as specified & directed |
| 79 | M&L for RCC (Nominal Mix) type B-0 1:2:4 (using 12.50mm graded stone aggregate) for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 80 | S&F Mild steel TMT bar 10mm dia and over cut to length bent to shape required, including cranking bending spirally and binding with and including mild steel sire (annealed) not less than 0.9mm dia all as specified and directed. |
| 81 | Dismantling wooden boarding any description, fixed in any position with nails as in shelves of cup board and pelmets of any description.complete all as specified and as directed . |
| 82 | Supply and fixing factory made single extruded WPC (wooden Polymer Composit )solid plain board 18mm th comprising of vergin polymer of K value 58-60 (suspension grade ) calcium carbonate &natural fibers (wood powder /Rice husk /wheat husk ) and non toxic adhesive (max toxicity index of 12 for 100 gm ) having min density of 650 Kg / cum & screw withdrawl strength 50 N /mm2 Modulus elasticity 850 N /mm2 & residence to spread of flame of class A category with property of being termite /borer proof , water proof moistuture proof and fire retardent and fixing with ss butt hinges of required size with necessary full body threaded star headed counter sunk ss screw ,solvent cement /adhesive to make kitchen /bedroom cabnets sides top and bottom and shelves inside the cabnets complete all as per manufactures specifications complete all as specified and directed. Note: 1 -SS butt hinges and SS screw shall be paid separetly 2- Material test certificate and auhontication souid be provided by the maufacturer. |
| 83 | Supply and fixing factory made single extruded WPC (wooden Polymer Composit )solid sigle side PVC laminate PVC foil of min 14 micron th approved colour shade board 18mm th comprising of vergin polymer of K value 58-60 (suspension grade ) calcium carbonate &natural fibers (wood powder /Rice husk /wheat husk ) and non toxic adhesive (max toxicity index of 12 for 100 gm ) having min density of 650 Kg / cum & screw withdrawl strength 50 N /mm2 Modulus elasticity 850 N /mm2 & residence to spread of flame of class A category with property of being termite /borer proof , water proof moistuture proof and fire retardent and fixing with ss butt hinges of required size with necessary full body threaded star headed counter sunk ss screw ,solvent cement /adhesive to make kitchen /bedroom cabnets sides top and bottom and shelves inside the cabnets complete all as per manufactures specifications complete all as specified and directed. Note: 1 -SS butt hinges and SS screw shall be paid separetly 2- Material test certificate and auhontication souid be provided by the maufacturer. |
| 84 | Supply and fixing factory made single extruded WPC (wooden Polymer Composit )solid plain board 12mm th comprising of vergin polymer of K value 58-60 (suspension grade ) calcium carbonate &natural fibers (wood powder /Rice husk /wheat husk ) and non toxic adhesive (max toxicity index of 12 for 100 gm ) having min density of 650 Kg / cum & screw withdrawl strength 50 N /mm2 Modulus elasticity 850 N /mm2 & residence to spread of flame of class A category with property of being termite /borer proof , water proof moistuture proof and fire retardent and fixing with ss butt hinges of required size with necessary full body threaded star headed counter sunk ss screw ,solvent cement /adhesive to make kitchen /bedroom cabnets sides top and bottom and shelves inside the cabnets complete all as per manufactures specifications complete all as specified and directed. Note: 1 -SS butt hinges and SS screw shall be paid separetly 2- Material test certificate and auhontication souid be provided by the maufacturer. |
| 85 | Material and labour for 40mm thick average thickness PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in levelling course / padding over roof surface with & including water proofing compound @ 2% by weight of cement, surface to be finished even & smooth with using extra cement to receive APP membrane including cleaning the roof top surface , brick tiles or concrete surfaces by picking vegetation roots, sweeping clean and washing down with water to remove dust etc and filling the damaged joints of brick tiles in CM 1:4 complete all as specified & directed. |
| 86 | S&F APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) laid on primed surface by forced application complete all as specifed |
| 87 | Heat resisting painting to Surfaces of any description wood, steel, iron, concrete, brick, stone, APP surface, etc., exceeding 10cm in width or girth incl preparation of APP surfaces complete all as specified and directed by Engr-in-charge |
| 88 | Material & labour for preparation of exposed brick wall surface by cleaning the surface with wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day.Note : Further treatment over the surface so achieved will be carried out only after approval of the same by GE. Note:- This item shall be executed by authorised applicator only. for carrying out efflorescence treatment to exposed and prepared wall surface here–in–above in following sequence :–(a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC (b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied \\"BY HAND\\" while the primer is tacky. 10 mm thick PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer's instructions :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(c) PMM surface should be allowed to dry one day. After that it shoud painted with two coats of one of the following compound mixed with cement only in ratio of one part of selected com-pound and one point five part of cement :–(i) Pidicrete URP of M/S Pidilite(ii) Sika Latex of M/s Sika(iii) Nitobond SBR Latex of M/s FOSROC(d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer instructions :–(i) Pidifin 2K of M/S Pidilite(ii) Brush Coat of M/s Sika(iii) Brush Bond of M/s FOSROCNote : Both coats should be perpendicular to each other and gap between two coats shall be minimum 6 hours.(e) Sprinkle loose coarse sand after second coat while surface is tacky. Note: (i) Item will be executed by authorised applicator of the selected /approved company only. (ii) Every stage of work will be approved by GE then only next layer will be executed by contractor. |
| 89 | Excavation over area not exceeding 1.50 m deep and getting out in soft/ loose soil |
| 90 | Removing excavated material(soil) n.exc 50 m depositing where directed at alevel n exc 1.50 m avove starting pint |
| 91 | M &L for PCC 1:4: 8 type-D2 as in sub base to floor 100mm thick (using 40mm graded stone aggregate) complete all as specified & directed |
| 92 | S & F Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with Grey cement & pigment all as specified and directed. |
| 93 | Sand filling under floors or in foundation including watering & consolidation 25mm thick complete all as specified and directed. |
| 94 | PCC (1:2:4) type B-0 (using 12.50 mm graded stone aggregate) in lintels clear span, cills, steps, seismic & other similar bands, coping, kneelers, apex stones , bed plates , water troughs & like including weathering slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 95 | PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in surface chennel and drain complete all as specified and directed. |
| 96 | Extra for forming fair finished drain or channel 30cm inner girth complete all as specified and directed. |
| 97 | Supply and fixing Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and as directed . |
| 98 | Dismantling of AC corrugated, semi corrugated sheet including ridges etc. in roof covering complete all as specified and directed. |
| 99 | M&L for precast RCC (Nominal Mix) type B-1 1:2:4 (using 20 mm graded aggregate) for landing , cover slab of manholes etc and set in cement mortar (1:4): complete all as specified and directed. |
| 100 | S/F Plain Mild steel wire 4 mm ,galvanised class 3 in drying cloths incl straining and fixing to steel posts complete all as specified and directed. |
| 101 | E/M PORTION Taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling rosees, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc.complete all as specified and directed. |
| 102 | Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and including PVC conduit not less than 20mm dia with and including accessories, concealed on wall/ and surface on ceiling and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flush boxes made out of 1.2mm thick of any module from 2 to 18 module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 including modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbed surfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. |
| 103 | Description all as per item No 102 here in before but for socket out let point 6 Amps on same board complete all as specified and directed. |
| 104 | Description all as per item No 102 here in before but for socket out let point 6 Amps on independent board complete all as specified and directed. |
| 105 | All as per srl item No 102 above but point wiring for one socket out let 16 & 6 Amps (independent) controlled by one switch with using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specified and directed. |
| 106 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and directed. |
| 107 | Supply and fixing modular switches, one way, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. |
| 108 | Supply and fixing modular switches, one way, 16/20 Amps, one module, 230 volt , AC supply, complete all as specified and directed. |
| 109 | Supply and fix modular switches, bell push, 6 amps one module, 230V, 50 Hz supply, complete all as specified and directed. |
| 110 | Supply and fix modular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specified and directed. |
| 111 | Supply and fix modular socket outlet 16/20 amps,3 pin, 2 module, complete all as specified and directed. |
| 112 | Supply and fix modular fan regulator step type one module / 2 module, 120 W, 230 Volts, 50 Hz, AC complete all as specified and directed. |
| 113 | Supply and fixing door bell electric, ding dong type, single phase, 230 volts, ISI Marked, complete all as specified and directed. |
| 114 | Supply and fixing of LED luminaries of capacity 20 watt integrated aluminium batten with including Oppel diffuser complete including disconnecting and taking down old existing light fitting of any description and in any position complete all as specified and as directed. |
| 115 | Supply and fix surface mounted LED tube light fitting with high efficient diffuser mirror light, aluminium housing in CRCA body suitable and including 10 watt LED tube high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light complete all as specified and directed. |
| 116 | Supply and fix Bulk Head Fitting 10 Watt and connected with copper conductor cable of size 1.50 Sqmm, for fixing the light fitting complete all as specified & directed. |
| 117 | Supply and fixing aesthetically designed wall bracket light (Wall Light) metal base in B22 holder with 7/9 watt LED lamp warm white, compact and energy efficient, epoxy powder coated light luminaire complete all as specified and as directed. |
| 118 | Supply and fixing in repair of bracket for security light made up of 25 mm dia suitable for security light, 0.6 metre long GI pipe, light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specified and directed. |
| 119 | Supply and fix LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP65 protection, better optics for uniform distribution with multiplte LEDs not less than 2 W eachand having optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mm copper conductor cable from connector to ceiling rose to connection of light complete all as specified and directed. |
| 120 | Supply and fix sheet metal enclosure with two pin and earth plug and socket with one single pole, MCB 20/ 32 Amps, 'B' curve, 240 volts including taking down existing sheet metal enclosure of any size & cap complete all as specified and directed. |
| 121 | Supply and fix sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole adjustable thermal release type ,125 Amp ,25 kA as incomer and MCBs as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed. |
| 122 | Supply and fix sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and including MCCB 4 pole adjustable thermal release type ,63 Amp ,16 kA as incomer and MCBs as out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specified and directed. |
| 123 | Supply and fixing in repair SPN distibution board 8 way, double door, IP 43, as per IS 8623 including 200 amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles complete all as specified and directed. |
| 124 | Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 Amp, in the MCB DB complete with connection testing and commissioning. |
| 125 | Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 126 | Supply and fixing 240 V, 10 KA 'B' curve miniature circuit breaker (MCB) of SP and current carrying capacity 40 to 63 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed. |
| 127 | Material and labour for sub main wiring with two single core FRLSH, PVC insulated unsheathed copper conductor cable 6.0 sq mm drawn in and including rigid non metallic PVC medium grade 25 mm dia concealed conduit with accessories on wall or ceiling with one additional PVC insulated , stranded copper conductor FRLSH of 6.0 sqmm,green colour for earth continuity conductor including including taking down old unserviceable sub main wiring and making good the disturbed surface complete, all as specified and directed. |
| 128 | M& L for taking down ceiling fan any type, taking in safe costudy and refix the same after completion of repair work including servicing, provision of cable from ceiling rose and painting with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust all as specified and directed. Please Enable Macros to View BoQ information |
| 129 | M& L for taking down ceiling fan any type, taking in safe costudy and refix the same after completion of repair work including servicing, provision of cable from ceiling rose and painting with synthetic enamel paint by sparying including filling cavities with filler, one coat after cleaning all dust all as specified and directed. Please Enable Macros to View BoQ information |
